Cannot use BT on my Satellite M40

Similar Questions

• Equium M40x: Can I use the adapter for Satellite M40 series?

  Can I use a power supply on my Equium M40x if it says it is compatible with the Satellite M40 series? The two laptops are similar, and the image of the card looks the same as the one I had. The part number is PA3378E-3AC3.

  Hello

  the satellite needs a power adapter 65W and 19V.
  Your power adapter output performance is too large (75W), you should not use it to avoid damage to the satellite.

  Good bye

• Cannot use Bluetooth on my Satellite L750D

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source.

  (Code 52) "that's why I can't use bluetooth, I downloaded the driver, intsalled, but his does not work."

  What should do?

  Hello

  The laptop supports Atheros Wlan and BT combo card.
  Before installing the Toshiba Bluetooth stack, you need to install the Atheros BT filter (located on the European driver Toshiba page)

• Re: Cannot use remote control Toshiba Satellite A500-1GL

  Hi all

  I just got my remote Toshiba (G83C0009R110)
  I have installed the Toshiba remote control manager.
  I use pre-installed 64-bit Win7 but cannot get the remote control works properly.

  Can anyone help with this?

  Thank you for your support and see you soon

  Hello

  As far as I know that Toshiba has a number of different models of Sat A500... with different options, check it out...
  So it may well be that some units have one unit of distance, others not... before buying a remote control, make sure that you check whether your device supports a control unit remotely.

  In my view, a merchant who sells Toshiba laptops could you provide details on remote available.

  Welcome them

• Cannot use the recovery on Satellite P100-227 disc

  I recently bought a laptop and decided to reset via the provided restore disc, to my surprise after having inserted the recovery disk and restart the notebook goes directly into Windows. Even if I went into the BIOS and set the CD/DVD drive as a starting point to the top, or even after pressing the F12 key.
  When the laptop is turned on the drive says that there is no data on the DVD, a double click on the DVD, it says 'insert the media into the DVD drive.

  My previous phone was a Toshiba Satellite 1900 303 and just to test and see if it was a problem with my recovery media, I've used the support of recovery on the P100 and it took me to the correct recovery screen. Then I swapped the media and used the recovery on the old 1900-303 Toshiba P100 and he returned to the correct recovery screen. This got me thinking so I tried a little more data CD / DVD and to my amazement it will read the DVD-R.

  No idea...

  Hello

  Have you tried to force startup from the DVD keeping C key after turning on the device?

• Re: Cannot use the recovery on Satellite L505D partition

  Hello.

  I am trying to help a friend with their Satellite L505D who had a serious virus problem. I wasn't able to run/install programs with the virus on it. I used a Microsoft tool to remove the rootkit trojan, but I always had problems with viruses. I also lost most of the programs on the computer. All folders were empty (except for some games), so I could not access all of the tools in this way. I could not the machine to load any Toshiba restore utility by pressing zero everything with power. I saw some recovery using F8 during the startup options and had a link to restore the original setting of Toshiba, but clicking that choice has done nothing else a break for a few seconds. I waited several minutes, clicked on it again, rebooted and tried. Nothing. As a side note, once all the while, the recovery partition was visible from explorer.exe. Not before or since.

  So I reformatted the computer with a 64-bit Win7 Home Premium Upgrade disk (the partition of restoration by leaving intact) and then enter the key for the system. Supprise, supprise, it asks me to activate within 3 days.

  My basic question is, can I access this partition recovery in a different way to use it? IE copy its contents, or start on some comand prompt to log e:?

  Thanks in advance for your suggestions.

  Hello

  To be clear: there is only one way to use the saved on the HARD drive recovery image and install it.
  Exact description step by step how you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  If this does not work, only way to do it anyway is to use the recovery DVDs. It is: has your friend created these disks?

• Cannot use @ symbol on laptop Satellite S50DT-B

  Hello world

  I can't get the symbol on my laptop. If anyone can help...

  Thank you
  Dony

  What do you mean you can't use it?
  Your keyboard is set to the correct language?

  Please check it in Control Panel > region and language > keyboard and languages...

• Cannot use the recovery for Satellite M45-S265 disc

  I tried using the recovery disk for M45-S265 of my granddaughter.

  According to the instructions that I'm supposed to put the DVD drive, and then turn off completely the machine. After that, restart and immediately hold down the F12 key, which should produce some sort of menu and then go through the recovery from there.

  However when I take the key F12 is pressed after the closing, nothing happens.

  So I'm looking for some real help here my friends. Thank you very much.

  Hello

  Can access you the BIOS as suggested by Feliks?
  Select this check box and set the CD/DVD player in the first position.

  Save the changes, and then attempts to boot from the disc of recovery again.

• Cannot use webcam on my Satellite P200

  I recently bought a Satellite P200 with integrated webcam. When I try to turn on the webcam I sometimes the message "locked by another application" and the cam will not turn on.

  -What it means and how the problem can be solved?

  Hello

  I have no solution but if you have time check it please http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=26376

  Maybe it will help you.
  Good bye

• Cannot use created for the Satellite A350-134 recovery disks

  EMM, I really hope you can help me.
  The laptop says that you create the disc of recovery by yourself, and that's what I did (on 2 Cds)
  So I wanted to reinstall my laptop and put in the first cd and booted from the CD. So I came in the Menu.
  Then, after some time he asked me to put in the second CD and I did. Then, he said he had a copy of the last 2 files needed error.
  So now I can't create the recovery again disk because I have already started to the reinstall. now, I have a few questions

  What can I do in general? Because I don't really want to buy for 35 euros a new recovery disk: S

  I thank everyone who helps me :D

  Of course, you can do this, but please note that you will not be able to activate this version with the product key for the Microsoft sticker, placed at the bottom of your laptop.

• Cannot use 'Toshiba Face recognition' Satellite L750-22Z

  Hi all

  It's my first post probably a large number

  Im having problems with face recognition software if I go all programs, TOSHIBA, utilities, face recognition is there, but when I try to open it I get a pop up that says that you are not allowed to perform this task. you contact the administrator, BUT I am the administrator.

  It's a new laptop so I could just do something stupid as im not that good with the PC I do cars

  Thank you Brett

  Hello

  All the tools of Toshiba, also face recognition Utility, can be downloaded from the European pilot page Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Here you can find all the drivers and tools.

• Cannot start up satellite M40 136

  Hello

  I have a Satellite M40 136 2.5 years old. I used it yesterday and then closed the lid then it shut down as usual. About half an hour later, I realized that I had to check a file so I opened the lid and normally he would back automatically, but it didn't. I pressed the button, which is surrounded by an LED, I think than orange means it's pending otherwise it is blue.

  When I pressed on it, he showed the light orange for about 2 seconds and then nothing for 5 seconds and then blue for 5 seconds. For these last 5 seconds the machine looks like it, he's trying to start, but then it off immediately. I tried and tried again, but it does the same thing. I tried to use the power cable. I managed to put the recovery DVDs during the 5 seconds, the blue light is on and I press the 'C' button, but it does not work.

  Does anyone have an idea on what I can do to get the machine to boot?

  Nicky

  Plug the laptop! Remove the battery and the AC adapter.
  Then wait about 30 min, then insert the battery and connect the AC to the laptop.
  Check if the mobile feed.

  If this isn't the case,-> contact ASP (certified partner) in your country, because the strange behavior of cell phone looks like a serious problem that cannot be solved by a common user!

  Good bye

• Satellite M40 - cannot boot from the recovery cd after format HARD drive

  Hello

  After my Satellite M40 - 133 being affected by the virus of security internet I had to wipe my hard drive. The virus wouldn't let me do anything, boot without failure or system restore. I wiped the disk and it still wouldn't load up. That's why I had to do a full erase of the disk including the hidden partition.

  After doing his now do not let my boot from the CD of restoration as it says invalid partition as his search for files that must be on the hidden partition. What can I do to get it started. I'm not bothered about to recover anything on the disc. If I remove the hard drive and put the recovery cd in, it excludes the disc and begins to start until he fails to see the hard drive.

  Outwardly I can link the drive to another pc and he sees it as a storage device so I'm glad that there is nothing wrong with the hard ware - help please

  Hello

  Can you see the HARD drive with all the details in the BIOS?
  If this isn't the case, then this means that the HARD drive is faulty or not fully compatible.
  If you can see the HARD drive in the BIOS, then this means that the HARD drive is compatible.

  But this should not affect booting from a bootable CD.
  Even if the HD would not be recognized in the BIOS, you should be able to boot from the CD. For example a live Linux CD has not only any disk HARD because the BONE would not be installed on the HARD drive, but it loads into RAM.

  The question is; Why you are unable to boot from any CD?
  Maybe the discs are scratched or the CD/DVD drive cannot read the disc more because of problems of laser lens
  If possible, try to copy/burn the Windows CD using another computer, and then try to start using the copied disc.

• Satellite M40 - how to use the recovery cd

  I have a laptop Toshiba Satellite M40 using XP Home
  My anti virus has caught a virus and delt with him.

  He told me to reboot, which I did. When he started toward the high winlogin.exe TI displayed cannot start because it is missing shell32.dll
  I clicked OK and it showed lsass.exe failed to load because it is missing shell32.dll
  I clicked on OK and a message showed the user interface login user interface dll failed. Msglna.dll failed to load. replace or restore the original dll.

  I restart and it brings back me to winlogin.exe message.
  Normally I upload these files and install them, but I can't the computer on at all.
  I can't get the safe mode or safe mode with prompt orders and last known configuration failed.

  I have a Toshiba restore disk but I don't want to do a full reformat and the other option on the drive says not to use it if you know what you
  made with files - and I do not have.

  I watch the options he had, but it just made no sence and would not make my situation worse.

  I hope someone can help.

  Thanks much sally

  Hello!

  Looks like you have a strange virus on your laptop

  But I put t know why you don t want to do a complete reformat of the laptop. The point is that the Toshiba Recovery disk contains a picture of the factory settings. This means that you can restore t that only some files and you need to do a complete reinstallation of the operating system. To be honest, I think that it is in any case the best solution, because I think that the virus can only be deleted if you format the HARD drive using the Toshiba recovery disc.
  To use the only recovery disk, you must boot from it and follow the instructions on the screen. It of easy to use and only takes a few minutes.

  If you want to save some files before you begin reinstalling Windows, you can put the HARD drive into an external HARD drive enclosure. Then you can back up your data from another computer. I did it and I have had success with this and maybe you too. It s worth a try.

  And let me give you a little advice. After you have reinstalled Windows to use a good antivirus program and keep up-to-date. I have a good experience AntiVir (Freeware) and Kaspersky. In addition to activate the Windows Firewall or you use another firewall. Don t forget to install the latest Service Pack for your operating system and activate the Windows automatic update function. If you can get all of the updates in a timely.

  I hope I could help you, and now you understand the best deal.

  Good bye

• Satellite M40-154 (PSM40E) - which HARD drive new can I use?

  Hello community,

  need a new HARD drive for my * Satellite M40 154 GR PSM 40th *. The old a HDD is: Toshiba MK8025GAS. The new need Toshiba also, 5400 RPM and 80-100GB capacity.
  I already try to find out which is right for my laptop, but I do not understand much about the HARD drives. There are more types, like GSX... But I need one that is compatible with my M40. Pleas help.

  Kind regards.

  AFAIK you can use each HARD top of page 120 GB disk because your laptop is a limitation of LBA 28 bits. This means that you can use the top of 128 GB of DISK space.

  The new HARD drive should be have an IDE interface and size 2.5. All that s and normally each Toshiba HDD should work with these specifications.