Cannot use CS6 after the expiry of the CC membership

Similar Questions

• Cannot use CS6 after the expiry of the CC of the trial

  H, I I work on a desktop with Windows 8.1. For a distance learning course, I got a one InDesign a Photshop Cloud version installed for 4 weeks on my desk. On this, I have a version of Adobe Creative Suite CS6. Now, after the expiry of the OBA of cloud I tried to work with my office versions. This ist is more possible, because I always get a note that my cloud-Abo has expired. It is not possible to remove the cloud of my desktio ist program. How can I use my version of office again?

  Cloud of reading also includes https://forums.adobe.com/thread/2089127 for ideas (see answer #1).

• Cannot use CS6 after the expiry of the subscription of the CC

  CS6 got on my computer for more than 4 years, I bought at the time. I used a free CC subscription through my University for the past year. Now that it has expired, I can't open my CS6 programs more. When I click the InDesign icon, for example, it tries to open, open CC icon then they disappear. I was chatting in line for more than an hour and got no where, except that my serial key is active and available for use. Should I uninstall and reinstall CS6 again?

  Run the cleanup tool

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

• Satellite A200 - cannot use Vista after the recovery of the product

  Hello. I hope someone can help me with the following... This week I had various issues with which follows my laptop a Vista update that system restore did not fix, so I decided to go for a full recovery of product (which I have a complete backup of all my files).

  So far I have used the product recovery on my laptop in the 3 ways I can see (and more than once): without changing the settings, change the settings and maximize the partition, change settings and select advance / expertise.

  Whenever I was able to complete the initialization of windows, create a new user account, etc. Once the Office has been set up, I get a small window with a progress bar and when it's over, I click on the button 'restart '...

  After the reboot, I get the black screen that says Microsoft Corporation with the green progress bar, but he's there for what feels like 'too long '. After a while, I get a black screen with a cursor, then a blue screen for a crash dump.

  If I use F8 and boot mode safe, the system stops the CplIR.sys file, although the hard disk activity seems to be continuing. I turn off after 10 minutes.

  If I use F8 and then select Repair computer... This is what is happening with each option
  -Restore the full windows operating system: after clicking on OK nothing happens.
  -Diagnostics of memory: there is no problem with memory
  -DOS prompt: I run CHKDSK and there is no problem with the hard drive
  -Restart: there is no errors, even if the word diagnosis 'impossible' when he sees, there is no system restore points

  Then on reboot I get the black screen with cursor followed by the crashdump OR if I managed to log in and access my desktop, I get the crash dump, as soon as I try to do something (like open Control Panel).

  Following the instructions found elsewhere, I have tried this after removing the battery, then changing power management options immediately after the initialization of windows (ie. before clicking on the restart button). No change.

  I even ignored the button restart! But still get a crash dump, when I try to do something.

  Any ideas? I've got past (ie. wasted) so a lot of time on this and don't understand what may be wrong after formatting the windows drive image and reloading...

  Hello

  It's very interesting story. I got several notebooks several times but I never noticed anything like that.
  I must say that what you did right and you think appropriately. If I were you I would try exactly the same steps to make it work somehow.
  I do not know which issues you had before, but I imagine that here it's just the problems of software and not important for the operation of the equipment.

  It's really hard to say what can be the problem. What you can try, is somewhere to get facilities Microsoft Vista disk and install naked Vista to see if the same thing will happen again.
  Anyway, the fact is that images of recovery are tested and adapted for each laptop model and if the material is OK there no reason for this kind of behavior.

  Try again with the new installation using Microsoft facilities drive and let us know exactly what is happening.

• During installing After Effects CS6, after the number of input series - report «we are unable to validate the serial number for Adobe After Effects CS6.» Please contact the support. »

  During installing After Effects CS6, after the number of input series - report «we are unable to validate the serial number for Adobe After Effects CS6.» Please contact the support. »

  What are the blocker of Adobe which affects the serial number validation processes.

  Follow the procedure below:

  • Remove all entries that has name of adobe. Then close the Textedit, it will Autosave.
  • Make sure that there is no entry of Adobe on the inside.
  • Then copy and paste the Hosts file in folder etc.
  • We replace the modified hosts file that we had copied on the desktop with the original Hosts file inside the folder etc.
  • When you are prompted, the authentication by password Mac,
  • Be sure to select the option Replace ...
  • Once you have replaced the Hosts file, double click on it again and check if the Hosts file is free of Adobe entries.

  Then try to activate the CS 6 apps using the serial number, it shud work.

  Let me know if you face any problem.

• Cannot use ps on the second computer

  Cannot use ps on the second computer

  You are allowed to download and install the cloud creative on the second computer as long as you use only one at a time:

  FAQ: Can I install Creative Cloud on several computers?

  If you have some problems to install:

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  FAQ: What should I do if I have trouble to download or install the creative cloud and Creative Cloud Apps?

  If you find errors or have another problem, please provide details.

• Tecra A11 - 1EG - cannot be accessed after the supervisor setting BIOS password

  Hello, I would like to know if anyone can help?

  We have started to put a supervisor on our laptop Tecra A11 password so that our students can not set passwords on the hard drive, etc.

  To enter the BIOS and set a BIOS password, press us F2 that the machine starts.
  Then we go to the security option, then supervisor password.
  After entering the password we use twice, press us F10 to save etc.

  The machine starts ok and will windows smoothly.

  The problem we have now, is that we cannot go back into the bios at all.
  As machine starts support us on the "F2" key as before, but unlike previously the screen remains white and the "Toshiba leading Innovation > ' screen no longer appears."

  If we keep our finger on the F' key or continue pressing the laptop restarts just without ever get to the BIOS screen where I guess that get us ask the supervisor password that we set earlier?

  Is there another key, that we should be pressing that start the laptop?

  I would add that we have added a password of supervisor for the screen of security BIOS on three of our laptops and all three have the same problem.

  Thank you

  Steve

  I think this should be useful for you:
  http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm

  In some cases, you need to press the "INS" in Toshiba logo appears.

  Then appears a prompt for the password for the supervisor and if the password is certified then the BIOS could be entered by pressing the "F2" key

• Cannot use Internet on the VPN connection

  Hello

  I used a cisco customer version 4.0.3 installed on my laptop to connect to the VPN server.

  When my VPN client is connected to a remote VPN server via a wired LAN to my site office, I can't use the Internet at the same time. I have him this might not be possible unless "split tunnel" is allowed in the side server. When I connect to the server via the Wi - Fi network in the same office, I can use the Internet. It made me confused, so I checked the IP address of my network bridge by using the command 'ipconfig '. He showed the two IPS 10.100.128.1 and 10.100.128.2 for the wireless network connection and a single IP 10.69.225.70 for the wired network connection.

  How can you explin the situation of the two above? Two default gateways allowed me to use the Internet when my client is connected to the server through the network wi - Fi? The disable "split tunnel" function in the server VPN has blocked me form using the Internet, the connection to the server via the cable network? I don't think so. Why?

  When my client is connected to the VPN server over the network domestic Wi - Fi home that has only a single default gateway, 192.168.0.1. I have no problem with the use of the Internet. How can you explain this bizarre situation? I really want to use Internet through a wired network and wireless at the other site office who have only one gateway respectively. Could you explain that?

  Thank you very much... Jae

  You are welcome, I hope we can fix it all.

  ComboFix set malware entries that could corrupt your browser for a malfunction. WinSockFix to fix corruptions that may have caused by the VPN software. But I'm not a type of corruption is likely to not do not work and https http to work.

  Now, let me understand the current issue. You cannot connect to the internet even the VPN is disconnected correct?

  I have a few questions and need of some outputs of diagnosis

  (1) I think that you are in a hotel. Using wireless? Can it be quota restrictions by the hotel management?

  2) connect via VPN. You have established the connection, my neighbors network at the office with the right button > properties. Now, right-click of Cisco VPN Adapter, and then click on repair. And then disconnect your VPN client

  (3) once you disconnect a VPN, do the repair, even for your Local network connection or a wireless connection. The VPN is disconnected, run the following in the command line

  Nslookup

  www.Google.com

  then run

  tracert 64.156.132.140

  then run

  impression of the route

  And after the output of these commands here.

• iPhone 6 touch id cannot be added after the upgrade ios 9.3.5

  My iPhone6 more ' Touch ID ceased to operate after the sound ' iOS to 9.3.5. This never happened with the previous iOS updates. Soft reboot (button home + power until the display of the apple logo) didn't work. Turn off the two "use Touch ID" for Unlock iPhone & iTunes App Store, then reboot and or soft reboot didn't work. Tried to 'Add a fingerprint', but as soon as it has been exploited, it goes directly to the page saying: 'FAIL' unable to complete installation of contact ID. Back... I even deleted all to restore my backup who had an operation 9.3.4 iOS, but then, I realized that after the restoration, put also got iOS updated! (I'm back to 0). Please help if you have any other fix for this? Thank you.

  Restoring as a NEW phone using iTunes (do not use backup at all).  Adding 3rd party applications, try the contact ID.  If it still does not work, then you have a hardware problem and will need to bring the phone to Apple for the assessment.

  Best,

  GDG

• Yoga - Thinkpad receiver of messages shortcut hot keys 30% CPU use and after the screen lock or sleep

  Hello! After returning from standby or locking screen, a process called 'Receiver of Thinkpad messages for shortcut shortcut keys' begins to use about 30% of the CPU. Time to go upo to battery of 60 to 70 degrees is running out very quickly. This process does not stop until I finish using the Task Manager. The end in this way, once it restarts even if I use sleep or lock the screen. Need help with this!

  I do not have this problem as a month ago or not. Has probably seen the day after some updates.

  

  On the edge of the T series, there is an update for this: https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/t540p-high-cpu-usage-by-shtctky-exe-ThinkP...

  I installed on the yoga. After the first reboot, a program called 'tposd.exe' used about 30% of cpu. I thought that this update does not work. But after the second restart that is not more. Shtctky.exe is not also using the cpu after sleep or lock. So I think we have a solution.

• Vista one network does. -Cannot access network after the first time it is connected

  I have a network of 4 XP machines 1 XP Pro machine 1 Vista machine at home and a home server system. Everything works fine except the machine Vista seems to be able to access the network once and after that it will be impossible to see the other system or access in any way. Anyone has any idea what exactly is happening?

  This article addresses an issue where the XP computers do not appear in the Vista network map:http://support.microsoft.com/kb/922120.  It can solve this particular problem.

  As far as the server goes, which is beyond the scope of this forum. Please repost in Windows Home Server Forum:http://social.microsoft.com/Forums/en-US/category/WindowsHomeServer/ , where experts in these servers will be happy to help you connect to it.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why my PC cannot use all of the available memory?

  Hello

  I have windows ultimate 64 bit and the 6 GB of ram (laptop)

  http://img03.arabsh.com/uploads/image/2012/09/19/0d36454a60fa0d.PNG

  As shown in the photo, there is a free memory and available memory

  Total: 6058
  caching: 2713
  available: 2552
  free: 1

  Why windows cannot use the available memory, although there is no such thing as free storage space!

  What you see is normal.

  Windows 7 do not free memory. He's trying to preload it with applications that she believes, based on experience, that you may need.

  If you have plenty of RAM, you can see more free memory if Windows doesn't find anything to him with preload.

  Available memory is not actively used by all processes memory but it is preloaded with applications, is of the opinion, based on experience, that you might need as I said above. If it is required by another process, it is available to be used and the preloaded data are deleted.

  I hope this helps you.

• Possbile to use products after the cancellation of the subscription?

  Is it possible to use adobe products, when I subscribe to a monthly payment and cancel it after the first payment?

  Like the model subscription Unreal Engine 4? I agree once and won't get any frequently updates the latest version, but can still use the version I bought?

  Hi Razora,

  When we talk about creative cloud, it is annual or monthly founded subscripotion. As long as you pay, your creative cloud continues to work.

  But if you cancel the subscription, which means that your services ceased, and you stopped paying for your product.

  Subsequently, your product will be trun in TRIAL mode and if you have not used the TRIAL before, it will work for 30 days and then it will stop working eventually.

  P.S. If you use the adobe forums, please check useful/correct responses of staff or assistance, if there is.

  Concerning

  Ludo has

• CS6: after the removal of gap with closure: move the markers, too?

  Hello

  Another thing, I wanted to ask you always...

  After the removal of a gap between clips: it would be useful that the markers would be moved, too.

  But maybe a feature of CC, too?

  Best regards, mtemp

  Correct, only in CC.

• Qosmio F55-Q502 cannot use GPS in the Viet Nam and Southeast Asia

  I have a Toshiba Qosmio F55 Q502 with purchase of system built-in GPS Garmin from the United States.
  But when I bring it to the Viet Nam and try to use the GPS, it does not work.

  I open Garmin Mobile PC, just Americans and Europeans of the cards.
  I try to activate the GPS, but the satellite always signal empty.

  I tried to go many places with view of clear skies but cound around ' nt captures the satellite signal.

  If this GPS is Globe Positioning system which means it can be used anywhere in the world.
  I do not know may be my GPS have the problem or the GPS is unusable in VietNam.

  My laptop just to buy a few days and I have not tried the GPS in US before.
  Can someone help me solve this problem?

  GPS should be worldwide.

  You can use a normal GPS for your car? Or as in the Nokia N95 GPS phone?