Cannot use guest access

Similar Questions

• Qosmio X 300 - this system cannot use Toshiba Accessibility

  I managed to install all Qosmio X 300 drivers on Windows 7 64 bit. Everything works fine except this one: 'Toshiba Accessibility. When I click on a button of 'Access', I get this error message:

  "This system cannot use Toshiba Accessibility"

  I get this and what is this feature?

  Hello

  I agree with the user above. I think you didn't install Toshiba Value Package added but it is necessary to other tools to operate. You can download it on the Toshiba site so take a look at it again.

  Check this box!

• guest computer must have access to the printer host cannot use

  I have a new Mac, an old Mac, an old Windows machine and printer of Xante AW1200.

  Almost all of my work is done on the new Mac.  I get the old machine Mac or Windows of the drawer on rare occasions, or when I need to print something, because the new Mac cannot use the printer.  (Xante never taken the trouble to develop an OS X 10.6.4 driver for this printer.)

  I would like to get rid of the Windows machine.  I have it successfully migrated to a machine of comments on the new Mac, using vmware Fusion 3.1.3 but I have not found a way to get the computer to see the printer.

  This isn't a complete surprise, as Xante does not provide a driver for their (former) printer and (my new host) operating system OS X 10.6.4 - but they were planning a WIndows XP driver that has always worked well on the Windows machine, connected by the RS232 port.

  The printer also works very well on my old Mac, connected via ethernet.

  Can I connect the printer to the new Mac's ethernet port.  Of course, the Mac cannot work with it.  But could the guest computer use Windows sound driver to manage the printer?

  None of the four standard ways of printing seem applicable: ThinPrint because the host cannot use the printer.  USB because the printer is not a USB connector.  network / wireless because I do not have my old Mac running all the time.  Hello because I think that it requires that the host can see the printer.

  It certainly isn't a frequently asked Question.  Sorry, my situation is so unusual.  But the printer is special enough for the work that I do.  Any tips?

  Thank you.

  If you have a router on your site then you should be able to connect the printer to the router, configure it as needed, and then accessing it in the comments as a network printer.  Note: The guest network should be configured as connected by a bridge to access in this way.

  Another option of network which is doable, but a little more difficult to set up, is to fix the printer directly on the Mac with a standard CAT5 Ethernet cable, not a Crossover as suggested in the Ethernet Port of Mac being automatic detection User Guide.  You would then manually configure the IP address, etc. on the printer and network bridged on the comments and even if Bridged his only access to the printer on this network adapter.  Then use a second network in the guest configured as NAT, if you do not also use Bridged on that, to enable the client to have access to other resources on the physical LAN to the host, such as Internet access, etc..

• Cannot use Adobe CC, guests 'impossible to reach the Adobe server.

  Cannot use Adobe CC, guests 'impossible to reach the Adobe server. Help, please.

  Please see can't use Adobe CC

  (Double Post)

• computer host cannot use the internet but the guest operating system can

  Hello, I am using vmware workstation 10 and have implemented a windows virtual xp (I am running windows 7). I chose bridged to my connection and internet mode works very well within the xp, but when you try to use the internet on my host computer it does not work. He said that I have no internet access but if it works on my virtual machine, then what's wrong?

  BTW I have configured in bridge to my wireless adapter if it makes a difference. also cannot use nat or host

  any help would be appreciated

  Thank you

  Then maybe it's a problem with your WiFi router no longer allowing a connection when using bridged and if it is it is not a question of VMware itself.   What brand and model of router?

• After the accident and reinstall: cannot use this product under the guest account

  I had a computer crash. After reinstall ADOBE Standard XI (Windows, German) I get the message: cannot use this product under the guest account.

  I tried to run it as an admin - without success. Before thr crash, it works perfectly.

  What is the problem - and how to solve?

  I run Windows 8 PRO

  Thanks for the help, Uli

  http://forums.Adobe.com/thread/783362

• After the installation, I get the message "cannot use this product under a guest account. That is what it is?

  I installed Acrobat Pro XI (academic edition).  But I get the message "cannot use this product under a guest account.  What should I do?

  Run as admin / talk to your IT Department.

  Mylenium

• E4200: Guest access: no IP address on the routers of the waterfall

  configuration:

  2 wireless routers E4200.

  LAN - LAN connected to a cable.

  Router 1 is connected to the internet and has active DHCP.

  Router 2 is NOT connected to the internet and has disabled DHCP.

  Wireless is enabled on both of them with the same SSID.

  account/guest access is enabled on them.

  It works:

  laptop connects to normal WIFI on Router 1--> internet works (IP: 192.168.1.150)

  laptop connects to normal WIFI on Router 2--> internet works (IP: 192.168.1.150)

  laptop connects to the WIFI router 1--> internet reviews works (after the screen connection in Internet Explorer) (IP: 192.168.33.108)

  It does NOT work

  laptop connects to Router 2--> internet reviews WIFI does NOT work

  --> laptop does she not get an IP address

  ?

  When I connect to the normal Wifi on Router 2, I get an IP address from the DHCP on the Router 1

  But when I do the same with the Router 2 REVIEWS WIFI, it does not request an IP address from the Router 1

  anyone ideas?

  Thank you

  comments network only works if the router is connected with its internet port. You cannot use the network invited on the router cascading with the LAN - LAN configuration.

• Cannot use cards MBNA Web page Services: no account login button appears.

  Cannot use cards MBNA Online Services because no connection of the personal account button appears on the original Web page. However, I can access my MBNA card account using their site of Bank of America. Also cannot reserve National coach Express tickets because no key prosecution appears after have entered my details to the passenger. However, the same site operates using SAFARI. I have FIREFOX 15.0.1.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Tecra A10 - 13I (PTSB0E-01400XFR): cannot use 8 GB of RAM

  Hello

  I'm trying to upgrade the memory on my TECRA A10 - 13I with windows server 2008 R2, I am upgrading from 4 GB to 8 GB.

  My BIOS detect 8 GB, see Windows my 8GB (2 x 4 GB) of RAM, but I can see in "8.00 GB (3.87 GB usable)" system properties When I run the application you "Resource monitor", I see 4233 reserved material MB. Finally, if I use a VM with 4 GB of RAM, the virtual machine cannot use this reserved memory and crashes.

  I have read this thread: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54112&tstart=0 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54112&tstart=0]
  I tried to update my BIOS and changed Advanced Startup Option "Maximum memory", but no change to my memory.

  Thank you
  Jonathan

  PS: Sorry for my poor English :)

  Hi mate

  TECRA A10 - 13I is certainly capable of that means you can use 2 x 4 GB RAM RAM 8 GB.

  What is the report DirectX?
  Check the value of memory here. In order to access the DirectX, you must use the command * dxdiag *.

  Greetings

• Re: Satellite L750-1XH - cannot use pre-installed Win7 Home Premium

  At the start of the laptop without accessing the past named screen user except in safe mode. User name of affected the screen goes black.

  Any ideas appreciated, wife is an attempt to do for College this week!

  Your ad is quite confusing and I don t understand exactly what is happening. If I understand right, you cannot use Windows, but you have full access in safe mode. Is this correct?

  In any case try to follow: start Windows in safe mode and try to roll back OS to an earlier time using System Restore tool. Do the first step, check what happens and post comments.

• Guest access / traffic meter

  I had the AC1900 for a few months and I also use access as a guest.

  I was wondering if it was possible to limit the volume of traffic on the access of the guests?

  No, it is not possible to place any cap bandwidth on guest access.

• Unable to delete the file, get the error 'cannot delete file access denied. "

  See the error will not remove the file:

  cannot delete file access is denied.

  Make sure that the disk is full or write-protected and that the file is not currently in use

  * original title - not delete the file show error *.

  Start in safe mode and try. If still no joy, try this tool.

  Unlocker File Remover
  http://www.emptyloop.com/Unlocker/

  Alternative download sites.

  Download it from FileHippo
  http://filehippo.com/download_unlocker/

  Download from CNET
  http://download.CNET.com/Unlocker/3000-2248_4-10493998.html

• E3200 guest access and phones

  Hi all

  Hoping someone here can help me with this problem.

  I have access as guest enabled on my router (firmware v1.0.4). E3200  Computers / laptops can connect, enter the password and use it very well.

  When I try to get a smartphone connect (tried 2 iPhones, 3 Windows phones and 2 different Android phones), they are able to connect to the network, but even after the opening, a browser, will never get to the "hotel" Cisco, landing page, allowing them to enter the guest access password and connect to.  By checking the connection on the phone settings, I see that they have acquired an IP address from 192.x.x.x correctly

  Specifically, I bought this router so that I would not give my WPA key when people came and wanted to use their phones on my network.

  Has anyone successfully got it works?

  Thanks in advance...

  Ok...  After a lot of messing around and reset the default settings, I finally got to work and can repro the problem at will.

  If the you are in a two router setup and the E3200 isn't the main router (i.e. in bridge mode), guest access will not work for smartphones.  Once I swapped the roles of my two routers (i.e. made the main router E3200), guests for Smartphone access works as expected.

  Don't know if a moderator / owner of the firmware feature reads the forums, but if you do, I consider this a bug.

• Mode bridge E4200v2 + guest access: No DHCP IP assigned?

  New E4200v2 2.0.37.  In "Bridge Mode - DHCP" (i.e., Access Point router).  Guest access is enabled & SSID broadcast.  DHCP server is disabled, because my main Sonicwall router that provides related to major network 192.168.1.0.

  PROBLEM = PC Client can see "-comments ' fine SSID and associate with her, BUT PC does NOT receive an address IP DHCP (i.e. 192.168.33.x) so the browser login page never appears and guest access does not work.

  I'm sure it's related to DHCP.  I'm assuming that the E4200 not receives or sends the comments with the PC client DHCP packets.

  I saw guest access works on the old E4200v1 before so I know what it should look like.

  Can anyone suggest any probable cause why my E4200v2 would not be providing comments DHCP addresses in the 192.168.33.0 subnet?

  I don't have that 24 hours until I have to deploy 2 new E4200v2 at a remote site and after that it will be really hard problems because I will not be on this site.

  Thanks in advance for expert advice!

  I think I SOLVED!

  Apparently, you need to ACTIVATE the two SERVER NAT & DHCP on the E4200, * before * you switch to BRIDGE MODE.

  When I did this, access as guest - works great!  Hooray!

  I guess the E4200 needs to use these 2 services that run in the background to give the subnet access as guest & dhcp work assignments, which is a process hidden, once you're in Bridge Mode.

  Wow, Cisco should really have a section of the guide user or KB article about it.  Or at least when you click on Bridge-Mode a little pop-up asking you to ensure that these 2 pre - req for are enabled.

  I'm moving now.