E3200 guest access and phones

Similar Questions

• I forgot my password for my iphone and sound off now is there a way to access my phone without losing everything on it

  I forgot my password for my iphone and sound off now is there a way to access my phone without losing everything on it

  No, it does not exist:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• App of Smart Wi - Fi and Guest Access + Bridge Mode

  Hello!
  I put my WRT1900AC as in Bridge Mode Access Point.
  Everything is OK. But I identify some things not usable, when my router is in Bridge Mode. Such a thing is the creation of a guest for Wifi/guest access account. The Linksys App Smart WiFi offering however, but it does not work. When I put the guest access 'ON' it just stay naturally 'OFF '.
  My question: is it supposed to be the case, or it may become in the future renewed with the software?
  At the same time, I can change a lot of things with this Smart WiFi App, when my WRT1900AC is in Bridge Mode. Proven stuff: Wifi channel number change and change the filter MAC they work correctly.

  With all the Smart Wifi router when the clipping comments wireless value is disabled, because the guest network depends on DHCP for IP subnet isolation.

  Is there a way to keep all the features of the WRT1900AC and the route of a primary network. It is an advanced configuration, because you must configure a static route in your main router and configure the WRT1900AC as a router not gateway.

  Discussion of the example:

  https://community.Linksys.com/T5/access-points/configuring-multiple-routers-in-one-network/m-p/93246...

• broken screen can I access my phone via laptop?

  broken screen can I access my phone via my laptop?

  Yes, you can connect to iTunes and iPhoto if your screen is cracked. The screen lights up at all? Or is it cracked.

• My iPhone 6 s + has been stolen. I got the code to access and iCloud, and I putted in find my iPhone. Here illegally, could unlock iPhone and log in icloud.

  My iPhone 6 s + has been stolen. I got the code to access and iCloud, and I putted in find my iPhone. Here illegally, could unlock iPhone and log in icloud. I only had reference no.. MKV82LL/A, Series n F2 * RWV on the packaging. I wonder how do I get it back?

  < personal information under the direction of the host >

  Hello Miss116,

  I am so sorry your iPhone was stolen, it's a terrible feeling, and I'm here to help you with everything I can.

  1. go to a computer and go to iCloud.com and sign in with your Apple ID and password.

  2. go find iPhone and all devices at the top, click on your iPhone.

  3. click on lost Mode and put in a phone number where you can be reached.

  4. click Next, then enter a message that says something along the lines, "Please find my iPhone, please call this number to return."

  5. click on done

  Best wishes to get your iPhone back safely.

• Apple ID and phone purchase

  My friend recently bought a phone off eBay and the former owner does not remove the find my iPhone thing and she cannot access the phone at all. She needs to their Apple ID and password, but it has no way to contact the previous owner. She has had a few people try and help her with her and try and fix it but no luck...

  Could use some help.

  Thank you

  Tell your friend to file a claim with eBay and get his money back if it cannot contact the seller. It is a brick and probably stolen. There is no way to bypass the blocking of activation.

• Guest access / traffic meter

  I had the AC1900 for a few months and I also use access as a guest.

  I was wondering if it was possible to limit the volume of traffic on the access of the guests?

  No, it is not possible to place any cap bandwidth on guest access.

• Access the phone memory

  Is it possible to access the phone's internal memory? When I connect via USB to my phone, I don't see map microSD reader. I also tried to remove my card microSD and then connect the phone. I still don't see it.

  Double post.

  Do a search before posting. You can continue the discussion on the above link.

  Locking thread.

  Mark

  Support Forums Manager

• Select "Guest Access" router E1000

  I have a Linksys E1000 router. The firmware is 2.1.00 7 build 30 August 2010. I would like to activate or enable guest access. I had to to 192.168.1.1 and find nothing there any access asked. To the wireless tab, the choices are basic setting wireless, advanced wireless, Wireless MAC filter and setting wireless security. Tfhank you.

  I don't think that cisco connect will mess up the configuration.

  You can change the password if necessary.

  I don't think that lion is currently supported.

• Guest access password!

  I think that when I bought this router, there is a guest access password... Right?  I am such a novice to this if there is I don't know where to find it!  Someone help and thank you!

  Dian

  Did you install Cisco Connect? This is where you can administer the guest account.

• Cannot use guest access

  On a new XAC1900 after the installation of a home network based on IP fixed, with the main computer wired and all other 8 devices connected WiFi and no problem at all, I tried to use guest access.

  I have configured the SSID with the suffix - comments and assigned a password. The SSID of the network is visible on the context of the WiFi but the connection will never be finalized.

  The device of the guest, I checked that the SSID of new comments, within its DHCP system, have not been assigned the 192.168.33.XX expected but one IP address, from 169 etc, which corresponds to a provider (not Italian), other then mine. Of course I can not access or enter any password.

  I contacted the support chat system that was very available, but unable to give a solution.

  I checked the configuration several times and reinstalled the latest firmware, but no result even manually.

  Failure is repetitive and the strange IP DHCP assigned to the Guest device is always the same (even after the days), showing that the data seem to be in the firmware. Also after firmware reinstall (verses 1.1.42.162280).

  I have no more ideas!

  Dear all, first thanks for your help. I finally found the solution. Here's how, for the benefit of third parties.

  When I configured the primary network, as always I posted, several equipment (PC, iOS dev, Iphones, portable computers ipads, etc.), fixed IPs. They were assigned in the numbering according to the IP Address of the default router 192.168.1.1. That's why from 192.168.1.2 to 192.168.1.255. I does not take any care about toggle point control DHCP on the router connectivity, and it remained empty. During today muttering I thought: Let me see if activating only not the DHCP protocol to the main network could stop the DHCP server to the SSID of comments. And that's all!  I had to explicitly enable DHCP in connectivity for the second (one guest) to exploit SSID.

  Once again thank you all

• E3000 - guest access without password

  Hello

  I just installed a new E3000 wireless router and it works fine.

  But I would like to give my guests access Internet without having to enter a password.

  I know how to change the - password of comments, but it requires a minimum 4 digits password.

  Is there a way to remove it?

  Thank you

  N ° there is no way that you can remove. The least we can do is to simplify the password such as 1234 or something.

• Mode bridge E4200v2 + guest access: No DHCP IP assigned?

  New E4200v2 2.0.37.  In "Bridge Mode - DHCP" (i.e., Access Point router).  Guest access is enabled & SSID broadcast.  DHCP server is disabled, because my main Sonicwall router that provides related to major network 192.168.1.0.

  PROBLEM = PC Client can see "-comments ' fine SSID and associate with her, BUT PC does NOT receive an address IP DHCP (i.e. 192.168.33.x) so the browser login page never appears and guest access does not work.

  I'm sure it's related to DHCP.  I'm assuming that the E4200 not receives or sends the comments with the PC client DHCP packets.

  I saw guest access works on the old E4200v1 before so I know what it should look like.

  Can anyone suggest any probable cause why my E4200v2 would not be providing comments DHCP addresses in the 192.168.33.0 subnet?

  I don't have that 24 hours until I have to deploy 2 new E4200v2 at a remote site and after that it will be really hard problems because I will not be on this site.

  Thanks in advance for expert advice!

  I think I SOLVED!

  Apparently, you need to ACTIVATE the two SERVER NAT & DHCP on the E4200, * before * you switch to BRIDGE MODE.

  When I did this, access as guest - works great!  Hooray!

  I guess the E4200 needs to use these 2 services that run in the background to give the subnet access as guest & dhcp work assignments, which is a process hidden, once you're in Bridge Mode.

  Wow, Cisco should really have a section of the guide user or KB article about it.  Or at least when you click on Bridge-Mode a little pop-up asking you to ensure that these 2 pre - req for are enabled.

  I'm moving now.

• E4200: Guest access: no IP address on the routers of the waterfall

  configuration:

  2 wireless routers E4200.

  LAN - LAN connected to a cable.

  Router 1 is connected to the internet and has active DHCP.

  Router 2 is NOT connected to the internet and has disabled DHCP.

  Wireless is enabled on both of them with the same SSID.

  account/guest access is enabled on them.

  It works:

  laptop connects to normal WIFI on Router 1--> internet works (IP: 192.168.1.150)

  laptop connects to normal WIFI on Router 2--> internet works (IP: 192.168.1.150)

  laptop connects to the WIFI router 1--> internet reviews works (after the screen connection in Internet Explorer) (IP: 192.168.33.108)

  It does NOT work

  laptop connects to Router 2--> internet reviews WIFI does NOT work

  --> laptop does she not get an IP address

  ?

  When I connect to the normal Wifi on Router 2, I get an IP address from the DHCP on the Router 1

  But when I do the same with the Router 2 REVIEWS WIFI, it does not request an IP address from the Router 1

  anyone ideas?

  Thank you

  comments network only works if the router is connected with its internet port. You cannot use the network invited on the router cascading with the LAN - LAN configuration.

• Cisco ISE 1.4 - guest access

  Hello world

  We use the ISE 1.4, now, we want to use the guest access ISE Module. I created the user invited on portal of the sponsor. Now, how can I configure authentication and authorization policy? I want to verify the user.

  Thank you.

  Hello! I strongly suggest you check out the videos of laboratory Minutes on access for guests and all the rest too :)

  http://www.labminutes.com/video/sec/ISE

  Give those a try and let us know if you still need help.

  Thank you for evaluating useful messages!