Cannot use my new Toshiba WiDi 40RL939

Similar Questions

• Satellite A210 - 27 M (PSAELE) cannot use the new wireless network card

  Hi all

  I changed my wi - fi for Atheros AR5b91 and hardware network card is locked.
  I can't remove this lock of wi - fi switch or fn + F8 probably it's the lock of the bios.

  I tried to unlock it on Windows Vista, Windows 7, Ubuntu, so it is not caused by software.
  I tried the card WiFi on another laptop (toshiba not) and it's ok.

  If anyone can help?

  Thank you

  Hello

  To me, it seems that you used is not compatible Wlan module.
  But I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=79237

  A user was unable to activate new update Intel Wlan card.
  According to some information, its possible to enable the Wlan card by covering pin 13 on the wireless Mini-PCI network card.
  But to be honest I've ever tried and I would use this workaround with caution.

• C55 - A satellite - 1 K 6 and Win7 - cannot use utility of Toshiba sleep

  Hi everyone;

  My laptop model is; Satellite C55 - A - 1 K 6

  My laptop part name: PSCGAE-04W01GTE

  I use Windows 7 Ultimate SP1 X 64 on it...

  TEMPRO told me "install Toshiba official sleep utility program" frequently, but when I download and install, when I try to run via the shortcut to my computer I get "Cannot get Hardware Information" error and then sleep Utility page open, but all features are disabled inside, as you can see below.

  I can't tick the checkbox ' activate sleep and Charge "... You can see his screen capture here-> [http://alpman.net/slputlty.jpg]

  Power USB standby is turned on in the BIOS, but I still have the same problem...

  Can someone help me please?

  Thank you...

  You have installed all the other tools and utilities, especially Toshiba value added package?

• Re: Cannot use remote control Toshiba Satellite A500-1GL

  Hi all

  I just got my remote Toshiba (G83C0009R110)
  I have installed the Toshiba remote control manager.
  I use pre-installed 64-bit Win7 but cannot get the remote control works properly.

  Can anyone help with this?

  Thank you for your support and see you soon

  Hello

  As far as I know that Toshiba has a number of different models of Sat A500... with different options, check it out...
  So it may well be that some units have one unit of distance, others not... before buying a remote control, make sure that you check whether your device supports a control unit remotely.

  In my view, a merchant who sells Toshiba laptops could you provide details on remote available.

  Welcome them

• Cannot use our new HP Photosmart B210e printer wireless with HP ePrint server.

  We bought a new printer HP B210e for our House to be able to print wireless smartphones, laptops and desktop. The first problem was that our main office, which is about 3 years old and under XP would not find the wireless printer. I contacted HP and after several hours, they changed my desktop to be able to see the printer. Alongside this, they configure the printer to have a fixed ip address.

  It worked well, but I still cannot print from the photo tray. My wife's office has also had the same problem, but we will stop using this office. Not something we want, but she has a laptop computer.

  The main feature that we wanted to use had to be able to send an e-mail to our printer through the HP eprint center. Who has worked on the first day, we have signed, but has not worked since. It seems that our printer cannot connect to the HP eprint center at all. We can send e-mail to our printer through the eprint server. We can see that the e-mail message has reached the server, but the server cannot transfer the email of the printer. We check the Setup wireless on our printer and it is correctly connected to our home network and I can print wireless from my office.

  We're fast approaching the decision of the printer to where we bought it. We do not want to, but have no choice unless we can understand how to print from our smart phones.

  So I ask for help with the printer or a recommendation on which printer you can buy that actually work on our network wireless home. I tried to find what printer is best for this purpose on the Internet but find that there, the information is just too complicated for us to make a decision.

  PS: I see too many complaints about the HP ePrint Center, but very little about HP trying to fix or even acknowledge that they have a problem. I think they do!

  I can't comment on the ePrintCenter (maybe it's temporarily down?) but I know that your printer is capable of printing from an iPhone or an iPad... your smartphone you happens to be an iPhone 3GS or 4? If so, you can use the last iOS4.2 that supports AirPrint and print directly to your printer. As long as your iPhone and your printer are both connected to the same network, that is. I hope this helps.

• Tecra S3 - cannot use the new RAM modules in the B slot

  Hi all

  I just bought two RAM modules of 1 GB to replace my old 512 MB one. This, as far as I know, is the maximum allowed by my Toshiba Tecra S3 (PTS30E-01000QSP).

  When I put a module in A slot, the machine works perfectly; If I place a second in location B, the computer tries to start but, at a time given, it freezes just (no activity of the HARD drive or changes on the screen) and the fun begins racing on as if some process crashes in the CPU to heat that make it up. At this point, I was always afraid that the heat can damage the computer and be turned off by pressing the on/off switch, so I can't tell if the problem is solved simply waiting.

  I swapped the two modules on A slot and the two work well when they are the only one on the machine. Pretty funny if I place (as is the case now) has the old 512 MB in the location B as well as a single module of 1 GB in slot, it works!

  My BIOS has been upgraded to the last, that I could find in these same pages (version 3.20 if I'm not mistaken), but it made no difference. If I enter the page of the BIOS when the two 1 GB modules are present, the BIOS recognizes that they are there. This behavior occurs when I try to start Windows or Linux.
  Honestly, I'm puzzled. Someone has an idea what can happen and how I could place the two modules on my machine?

  Thank you very much and sorry for the long post

  O.

  Hello

  The modules you purchased exactly for your Tecra S3? Maybe that they are not compatible with the laptop and it hangs after a few minutes.

  Normally, the Tecra S3 can handle up to 2 GB and that means 1 GB in each slot. For modules of Toshiba part number is PA3411U-1M1G.

  In my opinion you should try it with other modules with original 512 MB module everything works so I guess your new RAM is the cause of this problem.

• Cannot use the new PC

  He spent 12 days trying to use this system.  I gave the wicked thing and the new pc is returned to the store, and I'll go and learn Linux.

  Off line now and much less stress

  Original title: no fan

  Got the right contact.  It seems that what seemed like it came from Microsoft doesn't have.

  Obtained through real support and they set me up later.

  Top marks to the technical assistant named mercy, she couldn't be more useful.   I don't like the technical stuff I just want to go to my writing.

  Apology for have a boring here.

• Cannot use the new scripts to fill for Photoshop CC 2014.2 pattern

  I installed Photoshop CC 2014.2 (version 2014.2.0), but I am unable to get new scripts to fill pattern to work or even appear in the user interface. Namely, I am referring to the flame, frame photo, and tree scripted profiles described here: https://www.adobe.com/technology/projects/DecoScriptedPatternsInPhotoshop.html

  That's what my filling dialog looks like:

  

  I confirmed that the corresponding presets exist in the 2014 CC Photoshop > Presets > Deco folder:

  

  I tried to reset the Photoshop preferences; and while everything was reset, the missing presets did not always appear.

  The flame, photo frame and trees have been moved to the filter menu > CC 2014.2 rendering

  Gene

• I downloaded the new version and it says: you cannot use this application with this version of Mac os how can I download the older version?

  I downloaded the new version and it says: you cannot use this application with this version of Mac os how can I download the older version? My os is 10.4.11

  You can read this article: Firefox no longer works with Mac OS X 10.4 or PowerPC processors to read about the EOL for Mac 10.4 support and what the best options going forward.

• Cannot use iPhone"because it requires a newer version of iTunes.

  Phone has been updated.  MAC is updated.  Cannot use "iPhone" because it requires a newer version of iTunes. How can I clear this error message?

  By upgrading the computer at least Mac OS X 10.8.5.

  (139661)

• Qosmio X 300 - this system cannot use Toshiba Accessibility

  I managed to install all Qosmio X 300 drivers on Windows 7 64 bit. Everything works fine except this one: 'Toshiba Accessibility. When I click on a button of 'Access', I get this error message:

  "This system cannot use Toshiba Accessibility"

  I get this and what is this feature?

  Hello

  I agree with the user above. I think you didn't install Toshiba Value Package added but it is necessary to other tools to operate. You can download it on the Toshiba site so take a look at it again.

  Check this box!

• Cannot use iTunes Radio with my new Apple ID HELP!

  Help!

  cannot use the radio with my new id

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• My computer (win 7) does not detect the new lx1000 lifechat headset. Cannot use the microphone while I am on Skype.

  My computer (win 7) does not detect the new headset.

  Cannot use the microphone while I am on Skype.
  I Can hear music, but I can't record any sound, for the most part the microphone does not work as it should. (Which is terrible for a MS product)
  Can not see the device on the list of Audio material.
  Help?
  Thanks in advance
   
  Original title: lx1000 lifechat

  Not sure, but maybe - http://support.microsoft.com/kb/935748/en-gb

  It will be useful.

• Cannot download mail exoress outlook, error message; This product does not install on a 64-bit platform. It's a new toshiba laptop window 7.

  Cannot download mail outlook express. «product thiis does not install on a platform 64-bit;.» New toshiba / windows 7. pls help

  Outlook Express is not comaptible with win7, until what the mail application you installed?