Cannot use Win 10 and win 8 32-bit

Similar Questions

• Satellite U400 - 10l: no sound using Win XP 64-bit

  So I do not where to start...

  I have some problems with note Satellite U400 - 10l.
  Today I ' m trying to install winxp64b to my note. but after the installation starts more problems...

  the its don' t work? But why I ' m donwlod good pilot...
  Since the installation of sceer print driver...
  [http://tinypic.com/r/28wglcx/6]

  then the following... in system maganer for windows problem
  [http://tinypic.com/r/2woj1qv/6]

  could you please... give me the link directly to the correct drivers downoad?
  hepl me please! someone...

  Hello

  Satellite U400 - 10l belongs to the series of PSU40E and it supports the audio chip Conexant CX20561
  You need the Conexant audio driver in order to get the proper functioning!

  Please note that the Win XP drivers placed on the Toshiba page are released for Win 32 bit OS! Usually, they don t work with 64 bit XP!
  If you need Win XP 64 bit Conexant sound driver you need to search n 3 third-party pages for this driver.

  In addition, you must install Win XP service packs newer!
  SP3 includes many fixes that are necessary and important.
  SP3 must be installed before installing the audio driver.

• Driver webcam cannot install using Win 7 64 bit on Satellite Pro T110 - 11 L

  Hello

  I'm trying to use the webcam came with the laptop, it's a Satellite Pro T110 - 11L.

  It is currently running Windows 7 64 bit and I tried to install the web camera for Windows 7 64-bit drivers and even the XP version which Toshiba site has on the page drivers.

  The two pilots of the web unit fail during installation that gives "Application DMICheck stopped working" error.

  Can you help me?

  Thank you
  Hugo Figueira

  Hello Hugo

  According to the specifications of the laptop your model T was delivered with preinstalled Win7 64 bit professional. Original recovery image contains a preinstalled software webcam and it is configured to start automatically, so I would like to know since when you noticed this problem.

  I can't imagine that this problem persists since the first day. Am I right about that?

  Are you still using original preinstalled OS?
  By the way: this is the driver for the webcam just for your laptop model.

• OfficeJet J4660 all-in-One on Windows Server 2003 R2 - cannot use the scan and fax functionality

  Hello everyone,

  I recently purchased the Officejet J4660 AIO.  I had to install on our Windows Server 2003 R2 (with all latest updates), being present on the CD of driver for Win XP, I had to download the latest driver (OJJ4600_Corporate_ENU_10 - 55.8 MB) from the HP site.  During installation, ONLY the printer driver has been installed.  I can't use the SCAN function or the FAX software.  In fact, the icons for these two programs not created in the HP program group.  No error message appeared well while installing.

  All the world was a program similar and been able to get a work around for this?  I would like to use AIO printer that I bought, not only on the side of impression of it.

  Any help will be much appreciated.

  Thank you.

  Salim

  I think that the Acquisition of Image Windows (WIA) service is disabled in your system. Unlike Windows XP or Vista, in most Windows Server systems, this service is disabled by default. You can activate it in this way:

  1. right click on my computer and select manage.

  2. Select "Applications and Services-> Services";

  3. find Windows Image Acquisition (WIA), right click and select Properties.

  4. Select "auto" in the "Startup Type" list box in the "Général" tab

  5. in the situation 'Services', click 'start '.

• Cannot find Win 7 32 bit driver for PagePro 1400w printer

  Transfer xp sp3 system where the printer works fine for Win 7 pro 32-bit. Printer installs and its test of the works program to print but cannot print anything in win 7. Anyone know of a driver? Compatibility mode doesn't seem to work

  Try these drivers: http://download.cnet.com/KONICA-MINOLTA-PagePro-1400W/3000-2116_4-155923.html good luck!

• Re: Satellite A200-1N7 does not read the SDHC card using Win 7 32 bit

  Hi all

  After that I installed windows 7 32 bit on my laptop, it does not read my sdhc card.
  And he did it when I got Vista.

  Can someone help what to do?

  Thank you very much:

  Adry

  Hello

  Have you installed the driver for the card reader?
  Have you noticed an unknown device in Device Manager?

  Please see the page of European disk from Toshiba for the card reader driver.
  Satellite A200-1N7 belongs to the PSAE3E series
  I found the driver of the card reader for Vista 64-bit
  Usually the Vista driver should work on Win 7 OS too

  If this does not work, then try the drivers released for A500 or L500 series!

  Welcome them

• Satellite Pro L650: cannot use Skype - cam and microphone are not connected

  Having problems connecting to Skype.
  It seems that the microphone and web cam are not connected.
  Skype self-test will not respond with the voice test.

  Hello

  Have you checked the Skype settings?

  There, you should check if the right microphone and the internal webcam have been chosen.

  By the way: is the webcam properly recognized in Device Manager?

  You can use the webcam using the preinstalled software webcam?

• Satellite L555-12V - Touchpad isn't using Win 7 64 bit

  I bought the laptop with Windows 7 home premium.
  Then I installed Windows 7 ultimate 64 bit and my touchpad doesn't work.
  I've tried everything. I have the original drivers for 64-bit

  When I do the auto detection on the Toshiba page it shows me that I have a Satellite A200-17O. :/

  Sorry for my English :D

  MFG

  So, what laptop you have exactly?
  Satellite L555 or Satellite A200-17O?

  Have you checked the Device Manager if the touchpad would appear as unknown device or devices implemented with a yellow exclamation point?

  I think that it s driver related issue but to my knowledge the touchpad should work and you should be able to use even the drivers have not been installed.

  Have you checked if the touchpad is not disabled? Check it out using the FN + F9 option

• HP Pavilion Notebook 17.3 ": cannot use the buttons and moving the mouse

  Hello

  I'm a pretty heavy gamer and I recently I brought a HP Pavilion Notebook with windows 10 on it, and I expect to play games on it

  But the problem im getting is, if I hold one button, the mouse does not work, which, as you can tell, is unplayable.

  Is there any solution to this? his v19.0.12.97 of Synaptics Pointing Device running

  Thanks in advance

  Hello

  I tried the following on a machine not that different to yours and it seems to work.

  First, download the Synaptics driver on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63417.exe

  Disable your wireless card (should be f12).

  Open Control Panel, open programs and features, right click on the Synaptics driver and select uninstall.

  When you are done, reboot the laptop.

  When windows has reloaded, open your Downloads folder and launch the installer of Synaptics - when this is complete, restart the computer again.

  Open the Synaptics settings panel, disable SmartSense, then check if the touchpad works now with a key on the keyboard is pressed.

  If so, turn on your wireless card and use the utility on the following link to prevent Windows 10 to update automatically the Synaptics driver.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• my screen is too far left and I cannot use the contacts and things that are along there, what can I do?

  That's about all I can tell you, I click on channel ' lt points up and down on the left of my page commandes.sur is not centered, and there is a black bar on the side rilght.

  Arlene

  Using a laptop or desktop?

  Try to turn your monitor off and disconnect the power to it and then turn it back on. He do on all or only some programs that you use?

• HP Pavilion Windows 8.1 cannot use the TrackPad and keyboard at the same time

  So when I play games on my laptop or just go on the internet I can't hold down a key on my keyboard and move the mouse at the same time, it just does not take into account my trackpad and continues to do what the action on my keyboard.

  An example is so when I play one of my favorite games and the letter on the keyboard, 'A', is reached. I also spend my head of characters to get the lens during the attack. So I spend my TrackPad to aim my head during the attack. The recoil of the gun made my gun just start to reach the sky that its supposed to. But I want to move my head to redirect during filming. Does anyone know how to solve this problem.

  Thank you

  Coler234

  Hi Coler234 and welcome to the Forums of HP Support!

  I can understand how that must be frustrating when you try to play a game and can't move your player as you're supposed to. I'll try my best to help you solve this problem. To guide you, could you please tell me the number of model or product from your computer and the operating system that runs on it. Here are a few guides for How can I find my model number or product number? and Windows operating system am I running?

  I suggest that you try to restore the original drivers for the TouchPad see if solves the problem. I am also including this document to use and configure the TouchPad (Windows 7 and Vista) in the hope that it will help.

  I have also some steps that may work:

  1. click on the Synaptics icon in the system tray.

  2. Select properties of the pointing device.

  3. Select the device settings tab.

  4. Select the Synaptics LuxPad.

  5. click on settings.

  Select ACM PalmCheck improved.

  6. click on the gear icon to open a menu of settings.

  Move the PalmCheck slider all the way to the left in the OFF position.

  7. click on close.

  8. click on OK.

  Changing the settings is now complete.

  I hope that this information help, please let me know how it goes.

  Good luck and happy playing!

• Cannot use the mouse and the keyboard in the recovery environment

  I finally got my PC at work in lieu of my GPU. However, when I try to start my PC, he recommended that I use the repair of the system. When I try to boot normally, it hangs for a second then crashes and restarts at 'Starting windows' screen Try to boot in safe mode results in the PC hanging from the "CLASSPNP. SYS driver", crashing and restarting as start normally. Autour for a little googling told me that the way to fix is to go to the repair of the system and either rename the 'CLASSPNP. SYS"through the command prompt, or by using a system restore. Problem is that my keyboard and mouse do not work in the recovery environment, because she saw no USB 3.0 driver and my PC with only USB 3.0 struggling (I have a motherboard MSI Z170A PC COMPANION). I tried another keyboard and an adapter USB to PS2, or worked, or don't have crippling legacy USB in BIOS work. I ordered this (https://www.amazon.com/StarTech-com-Motherboard-Header-Adapter-USBMBADAPT2/dp/B002GNU2V6) for the delivery of a Home Depot. It's supposed to go where the power of front for the USB 2.0 cable is supposed to be plugged into the motherboard. Unfortunately, when I put in motherboard and plugged the keyboard and mouse, it still does. I'm doing something wrong?

  My PC has been broken for over 2 months, I don't want something as pesky as it's the thing that keeps him from working again.

  Discovered how to fix

  I activated "Installation of Windows 7" in the BIOS and it worked

  Now I just need to find a way to back up the data on my HARD drive

• Cannot use Windows + space and unable to see the language bar.

  Yesterday, I just did a full system recovery (at the original factory image). on my new laptop Dell which has windows 8.
  I had two languages in my preferences of Arabic and English
  Basically, the problem is that I can't use the shortcut Windows + space to change the language. everything works just Alt + Shift
  Also, this is not the language next to the clock bar! The taskbar looks like this

  

  and when I activate the indicator of "entry" system icons:
   
  It appears only as an empty space between the clock and the sound!

  

  also when I press Windows + I
  There is no language next to the power icon icon!
  

  Everything worked perfectly after recovery, but just after the execution of windows updates, he disappeared.
  I tried to remove Arabic and leaving only English alone and then add it back. but did not work
  also tried to change the settings here:
  
  also here
  
  but nothing has worked.
  so I restored all default settings and they don't currently exist in the two photos above.

  I already reinstalled the operating system!
  in any case, I did what you mentioned and did not work.
  Thank you.

• Cannot use CC photoshop and lightroom CC since I changed my computer. Why?

  I just changed my Mac by an another iMac. All applications were migrated to this computer. Since I can't open nor Lightroom CC CC. Photoshop what to do?

  ALEXIS

  Migration and Time Machine WILL NOT WORK with Cloud program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• How can I install SQL Developer 3.2 for using Win 7 64 bit?

  Using my laptop Dell E6420 (running Windows 7), I downloaded Developer SQL 3.2 64-bit RTOS and after it finished downloading I double-clicked on the file. He opened the 7-Zip and displays a file zip ("sqldeveloper"). When I double-clicked on the file, opened it, but I don't see any file type "install" or "setup" from the list of folders and files displayed. The Readme does not offer installation instructions.
  
  Please advise...
  
  Thank you!
  
  Marilyn Montgomery

  There is no installer.

  You need to extract all the files into a new folder on your computer - do not work all of the exe from inside the ZIP.

  You should be able to be up and running in 5 minutes or less. I have more detailed instructions and a video on my blog
  http://www.thatjeffsmith.com/archive/2012/05/getting-started-with-SQL-Developer-less-than-5-minutes/

  The official installation notes are on the download page:

  This download does not include the JDK. You can connect and use any JDK 1.6.0_11 or higher.

  To install and run:
  S ' ensure you have a JDK installed, if not, download here
  (click on download JDK 6 Update , where is the last update)
  -Download the file above
  -Extract sqldeveloper.zip in any folder, using the folder names
  -In this folder, open the sqldeveloper folder
  -Double-click sqldeveloper.exe