Cannot validate the windows disk that is used many times.

Similar Questions

• I get a popup stating the windows key that I use is not valid.

  Activate Windows when already activated?

  I just did a major update to my computer with a new motherboard, video card and processor, and now I get a popup stating the windows key that I use is not valid. The key on the sticker still gives me the same error. Any advice? Activate Windows when already activated?

  If your copy of WIndows was preinstalled, it rests on an OEM license.

  These licenses cannot be moved to the new motherboard, except under the conditions of warranty replacement.

  You will need to purchase a new complete commercial for Windows license.

• extract the windows disk drivers for use in 10 windows 7

  I would like to extract generic epson printer to my windows disk drivers for use in 10 windows 7. I've seen a web page that tells how to a disk of vista, but the directory and the file structure is completely different on the disc of windows 7.  A search at random through the disc gave no results.  One of you have directions on how to do it?

  How did the 24-pin generic Epson driver described in the list of Windows 7?

  I do not see a pilot "generic 24 pin" in the list of Epson drivers on my Windows 7 system, but I don't see a driver for the GENERAL-3500 Epson ESC/P 2 ver 2.0.  The GENERAL-3500 is a flatbed printer 24 pin.  Is this the driver you used?

  I ask because this driver - considered to be for "Windows 8, Windows 8.1 and later" - is available in both 32-bit and 64-bit versions in the Microsoft Update Catalog-->

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Epson%20dlq-3500

• Windows 7 cannot see the Windows XP computer to use the printer

  I have 3 computer at home 2 desktop computers and a laptop computer. I upgraded one of desktop and laptop for windows 7. The computer that has still XP cannot be upgraded, but has the printer connected to it. The desktop and laptop w / Windows 7 on them can see the XP computer on the network, but that the Bureau connects and can use the printer. On the laptop is can he sees, but cannot connect, I get this message

  "Error code: 0 x 80070035.
  The network path was not found.

  In troubleshooting, it says "windows cannot find a computer or a device", but you can clearly see in the network.

  Hi moorebounce,

  If you use Norton, McAfee, Trend Micro or Kaspersky I.S., make sure sharing files and printers turned in THEIR Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall) or you can temporarily disable the firewall and check.
   
  Similar question was dscussed in two threads below. The threads below we have answered for Windows vista and Windows XP, but they are good for Windows 7 as well.

  Follow the suggestions posted by Nicolas GMicrosoft support, Moderator on Wednesday, August 5, 2009 02:01
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/e30f3ab0-b6cd-4610-A579-92abcb520f4f
   
  James-Support EngineerMSFT, moderator Saturday, June 6, 2009 18:48
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/7846fdb1-AE66-467e-887d-0a981e6668f6
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows recovery system cannot read the recovery disk

  I have Vista laptop computer model pavilion POS, when I bought it, I made a creation of recovery disks, but now when I put it in my PC to see contains I see an error that Sandra insert your disc and system cannot fix it and I also used microsoft fixed it Center but cannot fix it.

  Hello

  Here are all the HP information on different methods to recover back to factory settings

  Three ways to recover the PC to original operating status

  You have a choice of three ways to run a recovery and restore your computer to its original state. The recovery process may take an hour upwards or more and is not complete until the prompt to connect to the computer. When the recovery is complete, don't forget to run the update of Microsoft Windows and the HP health check to install all the drivers updated and software.
  1. If the computer can boot to the Windows desktop, start the Recovery Manager.
  2. At startup, press f11 to start Recovery Manager.
  3. Restore the PC to its original state with the HP Recovery Manager of in Windows Vista
     If the PC can be started and opens on the Windows desktop, you can use the HP recovery disk to restore the PC to original factory State by following the steps below.
     1. Click Start and enter the recovery in the field of research. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
        Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
     2. Click Advanced options , System Recovery , and then click Next . The PC will restart and reopen the Recovery Manager.
        Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
     3. When the PC restarts, select the System Recovery option and click Next .
     4. If you are prompted to use the Microsoft System Restore , click No and then click Next .
     5. When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
     6. When you are prompted to recover without backing up your files , please STOP before you click Next .

        CAUTION:

        It's the last chance to change your mind recovery PC and delete all the files and programs. Once you click Next , the restore process cannot be stopped

     7. If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.
     The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.
     Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible

     If the PC does not start under Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.

     1. Press on the button / stop to start the PC and press the f11 key when the standard BIOS guests appear on the black screen.

        NOTE:

        By pressing the f11 key at startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

        • If the HP Recovery Manager can access the hard disk recovery partition, a prompt to back up user files before you start the recovery
     . Follow the instructions.
     • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
     • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

  4. When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.
  Solve a common problem of recovery.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.

  NOTE:

  Run the recovery process by using the custom recovery disk you created can take less than an hour, while you use replacement discs ordered directly from HP can take four to six hours and includes several reboots.

  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.

  Use the recovery discs to restore the PC by following the steps below.

  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. Follow the on-screen instructions and perform the necessary actions.

     NOTE:

     Do not interrupt the recovery process even though the computer may restart, and the Windows desktop can display at different times.

  • When you are prompted, follow the on-screen instructions to backup user files.
  • After completing the backup, when you are prompted, reinsert the recovery disk, and then click Next to continue the recovery process.
    A status box is displayed to indicate the State of the recovery and the estimated remaining time.
  • If you have used several disks when you created the custom recovery discs, follow the prompts to remove the first disc and insert requested discs.
  5. When you are prompted to Insert additional driver disk , take one of the following actions:
     • If you purchased a replacement of HP recovery disk and it included an extra driver disc, insert the disc, and then click OK or Next . The recovery program checks the additional drive and installs the necessary files.
       After you install the additional files, a prompt to remove extra disc and insert the original recovery disk.

     • If you bought a replacement at HP recovery disc, and he didn't get an extra driver disk, click ignore or Cancel . The recovery program will ignore the request and install the following file on the recovery disk.

     • If you have created a personal recovery disc, press Next to continue.

  6. Continue following the onscreen instructions to complete the recovery process.

  NOTE:

  If you have not created a personal recovery disk or the recovery disk will fail or corrupt, see HP - order recovery discs for Windows 7, Vista or XP laptops for more information.

  7. Cannot find the left column that used to be on the documents and photo files.

     Cannot find the left column that used to be on the documents and photo files. On this missing column I know was there before, had options fax, copy and other things we could do with these files. I want to get that back. Thank you.

     With my Documents folder open, go to Toolsand then click on Options files . On the general tab, tasks section, choose Show tasks in folders.

     I would like to know if it works. Thank you.

  8. Tried to open the Excel spreadsheet in Sharepoint, but get the message "cannot open the window because it contains the following features that are not supported by Excel in the browser: sheet Protection.

     I tried to open this Excel spreadsheet in Sharepoint and received the following message.

     "Cannot open the window because it contains the following features that are not supported by Excel in the browser:

     -Protection plate

     You want to try to open the message in Excel? »

     Learn more about the unsupported features.

     YES                       NO

     When I type 'Yes', I had then the second message.

     "To open this workbook, your computer must have a version of Microsoft Excel is installed and your Web browser must support opening files directly from Excel in the browser".

     What should I do?

     Original title: sharepoint excel files

     Tommy:

     I have 64 bit explore.  So I guess that the thought is that the error message was generated by the incoming file, as I have other files Excel I can access in Sharepoint with no problem?  I sent the file Outlook e-mail and was able to open it with no problem at all.  .

     Thanks for the information,

     Jim

  9. Cannot open the windows store, a message comes on that I'm not on the internet, or it has expired.

     Original title: 8.0 to 8.1

     Cannot open the windows of my new computer store. I'm now 22 things that are in the box in the store. Whenever I try to open the store, a message lights up, that I am either not on the internet, or it has expired. I don't know what to do. Thank you

     (1) try to reset the cache to the Store: right click on the Windows icon at the bottom left, click Run, type wsreset.exe, enter

     (2) run the troubleshooter App: http://windows.microsoft.com/en-US/windows-8/what-troubleshoot-problems-app

     (3) (3) partir go to a command prompt (Administrator), run the following commands

     (1) sfc/scannow, enter. Restart your computer

     (2) Dism.exe / Online/Cleanup-Image /ScanHealth

     (3) Dism.exe/online /Cleanup - /RestoreHealth Image, restart, and then try to open the store

     (4) re - run sfc/scannow then restart if necessary

     Hope this helps and if you need any additional aid station and we will be happy to help you.

     The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

     "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

     If this has answered your message please mark as answer

  10. I bought Photoshop element 14 this morning, get the serial number Adobe e-mail and downloaded the software, but... Adobe is always telling me that they cannot validate the software. What should I do now?

      I bought Photoshop element 14 this morning, get the serial number Adobe e-mail and downloaded the software, but... Adobe is always telling me that they cannot validate the software. What should I do now?

      Please see the links below.

      • Invalid serial number error
      • Error "serial number is not valid for this product". Creative Suite

      Hope this will help you.

      Kind regards

      Hervé Khare

  11. 6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash.

      6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash. The files are: DK5A0243. CR2

      Lightroom 6 trying to copy pictures to a different directory than what is Lightroom 5. That's why you have the problem.

      You can change the directory where you are teaching LR 6 to place photos, or change the permissions on this directory to read & write.

  12. Cannot complete the Windows XP installation.

      After a problem started that I could not fix,

      I formatted the drive C. Unfortunately, I then started to install windows xp on a disk that I don't have the correct product code. Therefore, I can't past the Setup screen to halfway. Now I have the correct windows xp disc with the product code, but cannot re - format the drive to start a new installation. Any help would be welcome. Thank you

      Hi KENNETHCAMPBELLST,

      • What happens when you try to reformat the drive using the good Windows XP CD?

      The only option is to start the Windows XP installation by using the correct CD and format the drive when you are prompted.

      How to install or upgrade to Windows XP

      http://support.Microsoft.com/kb/978307

  13. The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

      original title: The Audio service is not running windows vista

      Hello

      I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

      I saw it in Event Viewer

      The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

      Thank you

      -Majid

      original title: The Audio service is not running windows vista

      Hello

      I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

      I saw it in Event Viewer

      The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

      Thank you

      -Majid

      These error messages are a pain in the neck to extract useful information.

      I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

      If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

      Realtek and NVIDIA, for example get stuff good free audio driver.

      If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

  14. Cannot open the hard disk C: and D:, or no matter what follder on them by double-clicking

      After download cannot open the hard disk C: and D: Internet Explorer 9 windows updates or no matter what follder on them by clicking twice and I opened by right clicking and open.  So I have to use him created restore point Internet explorer 9 and return to internet explorer 8 and the previous record and the problem is solved. How I overcome this problem?

      Babis

      This can be a symptom of malware on your system. Take a look at the guides below for advice in conclusion/remove the malware from your system:
      http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

      Also: http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/my-internet-explorer-has-been-hijacked-by-a-virus/f26f7291-d646-4870-864e-a31976df0011

  15. Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

      On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

      Hi jdmanel,

      NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

      Follow the steps in the article.

      You cannot start the Windows Firewall service in Windows XP SP2

      Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

      For reference:

      How to manually open ports in Internet Connection Firewall in Windows XP

  16. Cannot find the Windows Photo Viewer to open photos

      Greetings ~

      recently, I downloaded windows essentials and have downloaded Photo gallary, I want not, I cannot locate the Windows Photo Viewer to open photo with I want to solve this problem I hate photo gallary I hate that >.< i="" wanna="" open="" with="" photo="" viewer="" help="">

      Hello

      I suggest that you follow the steps in the link below and run SFC scan on your computer.

      Use the System File Checker tool to repair missing or corrupted system files

      http://support.Microsoft.com/kb/929833

      Let us know the status of the issue.