Cannot write a Blue Ray error message still CS

Similar Questions

• I am trying to burn a Blu - ray on cs6 still, but the same error message.

  Blu - ray error: "device error", Code: Note '3', ' CreateStcSequence: cannot write.»

  I don't know what it is or what it means. Please someone tell me what it is and how to fix it

  This error is probably from multiple sources and it has no uniform solution reported. It can be drive or media. It can be permissions. A reinstall of the still has set at least a situation. Reduce the size of the bitrate/project can avoid the error. Make sure that you still run 'as administrator'.

• Blu - ray error - Encore CS6

  Hello

  I have problems to export my Blu - ray - I used Media Encoder to export my Premiere Pro sequence, using the codec H.264 Blu - ray.

  This is the error message I get, which appears once it seems to have burned the disc and on the "flow of building": Blu - ray error: "unread device", code: '3', notes: "CreateStcSequence: cannot write M2S file. »

  I tried to re - export my images and the creation of new projects yet.

  Anyone has any suggestions please?

  Thank you

  Try building an image. If it works, burn with ImgBurn for PC or for Mac Toast.

• Blu - Ray error

  So I burned Blu-Rays since January 2010 with still no problem. Nothing has changed in how I create these disks. I'm always by exporting the settings media "MPEG-2: Blu - Ray" first and then import a calendar with their adjacent once .wav files in yet.

  But lately, I am completely unable to finish burning. I've always been able to burn DVDs with this drive, so I can't imagine that this is a hardware error, but I think he's trying to tell me otherwise. My next attempt was recently, with the blu - ray burned 12GB to 16 GB. (approx.).

  It stops every time, it gives me a window with this exact message, nothing more:

  "Blu - ray error:"device error", Code: '3', note:"

  I tried Googling this error for more information code that looks like it is truncated after "Note:"but found nothing. " Does anyone have advice?

  It's all in CS5 btw.

  Thanks for your help in advance!

  Welcome to the forum.

  Errors of the device often indicate conflicts of hardware, firmware or operating system with even burning engine.  An autour way building a disk image, then burn that image to BD or DVD using the free program, ImgBurn.

  The official ImgBurn website

  If you are on a Mac, then build an image and burning with toast comics are the alternative.  But the bread is not free.

  You also have the opportunity to resolve the error.  Review the Windows/OSX updates and any software may have added or upgraded.  Make back these changes and restart to see if the problem goes away.

  -Jeff

• Yet CS4 Blu - ray error: "Fatal Error", Code: '0', note: "

  Someone has encountered this: still CS4 Blu - ray error: "Fatal Error", Code: '0', note: "

  Any ideas on what this means or how to fix it?

  Burn to a BD - R.  Tried two different Blu - ray burners.  First created a Blu - ray Image.

  For CS4, you must update the component of Roxio http://forums.adobe.com/thread/400484?tstart=0
  More and Roxio http://forums.adobe.com/thread/528582?tstart=0 or directly to
  http://KB.Roxio.com/search.aspx?url=/content/KB/General%20Information/000070GN¶ms

  In addition, the names of long file or odd characters Cause crashing http://forums.adobe.com/thread/588273
  And here http://forums.adobe.com/thread/666558?tstart=0 #4
  And this thread of Message http://forums.adobe.com/thread/665641?tstart=0

• Windows XP blue screen error message: 0 x 00000024

  I keep my pc while it was running chkdsk (Yes, I know now that it was stupid) and since then couldn't make it past the above blue screen error message.

  Read the full error message: Stop: 0 x 00000024 (0x83160AB0, 0 x 0000102, 0 x 00190203, 0 x 00000000)

  I have worked with F8, F12 and F2 Setup and managed to do it boot from the CD.  I put in the diagnosis CD and ran the diagnostics for blue screen and hard drive errors - all tests passed.

  Then, I changed Setup to boot from the hard disk - but again received the blue screen.  Once back to the prompt, I tried running chkdsk/f and has received no indication of errors.  I tried chkdsk/f/r and can not access the recovery screen (it says it's an invalid order).  I tried to put it in C: > R and f: > R (F is my cd drive).

  Help!  How can I get rid of this screen?

  You damaged the Windows installation. If you have not saved the data on that hard drive, you may be able to get it back by using Linux Livecd such as Knoppix and copying data to an external hard drive. General information about the use of Knoppix for this are:

  You will need a computer with two cd drives, which is a dvd/cd-rw OR a usb thumb drive with enough capacity to store your data, OR a usb/firewire external drive to FAT32 (not NTFS) *. To get the Knoppix, you need a computer with a fast Internet connection and software third engraving. Download Knoppix .iso image file and create your bootable cd. Then start with her and she will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions.

  http://www.Knoppix.NET

  Once the data is safe, try a repair installation. If it works fine. If this is not the case, do a clean install of Windows.

  http://www.michaelstevenstech.com/XPrepairinstall.htm - repair install how-to
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  You sound quite gifted in computer science but if the foregoing is not going to be your cup of tea (and that's OK!), take the machine to a competent computer technology instead. This is not a person of a type BigComputerStore/GeekSquad of the place. MS - MVP - Elephant Boy computers - don't panic!

• Blu - ray error: "device error" Code: "3", note: "AS-StorageError =-97060.

  I just lost 2 Blu - Ray discs, try to burn a project. I tried to burn a very simple project: a chapter two Blu - Ray with two episodes of 55 minutes of a TV on this topic show.  Recently I used the exact same computer to do exactly the same work successfully, so I don't know what the problem is.
  There are no menus in the project: it's just a rudimentary auto play disc with stereo sound.  Layer the watch 24.37 GB used on a single BD disc.

  The files are consistent and that construction starts, the following error appears:

  Blu - ray error: "device error" Code: "3", note: "AS-StorageError =-97060.

  System information:

  Windows 7 Professional

  Service Pack 1
  Intel i7 8 cores @ 2.80 GHz

  12 GB 1600 RAM

  AMD Radeon HD5870
  File HD 7200 RPM WD 3 TB NTSC system

  Pioneer BD - RW BDR-206 ATA burnerncore

  Adobe still CS6

  I do not see another example of this type of error the "97060" in it.

  I never have confidence I think remember me this, but note that the GB 24.37 may actually be 24.37 GiB, which may be too big to fit on a single layer Bluray. You should get another error, but who knows.

  I would try the building to a folder to see if this succeeds. Then you can return to the question of the combustion. Many of us prefer ImgBurn to burn and not yet.

• "Cannot start Microsoft Office Outlook" error message when you try to click on a name or contact us on a Web site to send a msg email on Outlook/microsoft office 2003

  "Cannot start Microsoft Office Outlook" error message when you try to click on a name or contact us on a website to send an email on Outlook/microsoft office 2003 Vista OS msg. My laptop came with Microsoft Office 2007 TRIAL version, but I already had Microsoft Office Pro 2003, so loaded on when I got it almost a year ago. My trial expired months ago... but never uninstalled cause 2003 worked. Then I wanted to do something in WORD and kept pulling up the 2007 trial and was confusing, so I sent the 2007 trial stuff to recycle bin, but not yet the uninstall. Since then all of a sudden I started to get this error msg. I can open OUTLOOK very well... BUT I don't even use OUTLOOK at all. I send from comcast.
  1. How can I get rid of this error?
  2. does anyone know how I can get my comcast open up when I go to a website to webmaster option instead of defaulting to outlook? And I already checked, "set as my default" is NOT enabled in outlook.
  Help, please!

  Hello

  Please check with the experts of the Office and Outlook here: (re - ask your question in these groups)

  Discussions of Questions General Outlook
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  MS Office discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
  And here:

  Microsoft.public.Outlook discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Outlook&cat=en_us_81f401b3-b3fe-4e8d-B291-066f30b63ec8&lang=en&CR=us

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Windows 7, get this blue screen error message, what should I do to remedy? C:\Windows\Minidump\100312-29827-01.dmp

  Need help, my computer hangs at this message

  Windows 7, get this blue screen error message, what should I do to remedy? C:\Windows\Minidump\100312-29827-01.dmp

  Hello

  1. when exactly do you get this error message?

  2 are you able to start in the Office?

  3 have there been recent changes to the computer before the show?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Resolve stop (blue screen) errors in Windows 7: http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful.

• After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

  Original title: dvd player

  recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

  Duplicate the content of the thread:

  After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

  My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

  Hello

  You can check these links and try...

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116

• Windows Media Player 12/Windows 7; Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support.

  Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support "?  I have Windows Media Player 12 and it comes a new movie.  I can play other discs blue ray on this computer, but not this one.  Is there an update that I'm missing or a codec I need?

  Thank you

  This new film format is not supported by Windows Media Player, here is a link on how to play a dvd on windows media... player and codecs...

  http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player.

  If you can not play... try using third-party codecs, but at your own risk :D

  Hope this helps you :)

• Blu - ray error: internal error, code 11. Put too close subtitle

  Hello

  I have this error when I build blu - ray disc with subtitles:

  Blu - ray error: "internal error 11 (internal software error:...-..). \Private\GraphicsEncoders\PGProcessor.cpp line 236), "Code:"11", note:"subtitle put too close. "

  I have no idea what to do, tried everything.

  If I delete most of the subtitles, and there are only several lines left it built without any problem.

  Today, I limit with the project.

  Please help if you have the solution.

  Maszok

  You have subtitles that are less than 3 images apart? What is the smallest number of frames on all your subtitles?

• Reference still cs6 Blu - ray error 3 cannot write file M25

  Hi guys

  I still use cs6 to burn Blu - Ray without any problem so far

  Tried to burn a wedding video and I get now this error 3 failure etc etc.

  I use a Mac with a plugin blu - ray LG burner.

  I burned a picture of the still fron of marriage on my hard drive and using Toast right click to burn to disc

  Message arrives to insert a drive of 25g in drive.and is here

  It will not pick up my external hard drive for some reason any.

  Can someone help me find out sort yet or what software would I need for the mac to be able to burn blu - ray discs

  Thank you

  Nige

  To install to this discussion in the forum again.

• Cannot burn to blu - ray

  Hi all

  I have a project of 3.5 minutes I am trying burn to blu ray.

  Export window said there will be 2 output files.

  One of them an ac3 file.

  At about 66% finished (task window) my LG $30 burner opens and I get a message saying insert the floppy in.

  Then after a few minutes it spits out there.

  I get no error message.

  My burner is not blu - ray. I don't have the box.

  Stays stuck on 66.

  I see that I have a few icons of Red media on the project for a few still missing photos. But no other clues.

  This is my 2nd attempt and the same as the first.

  I have TOast 10 and I don't see a download for him and never liked Roxio blu = ray enough to give them more money.

  Thank you

  Al

  First code Blu - ray to your hard drive, and then see if you can burn on the disc from the Finder.

  What is the name of device? I can't find a LG burner with a number like that.

• Satellite L855, disk Blu - ray "error Code-19".

  Hello world

  I have a Toshiba Satellite L855 - 14 p PSKFWE-00U00MTE with Windows 8.1 6.3.966.
  After updating my Windows OS 8.1 the blu - ray disc drive has stopped working (error Code-19).

  All windows and Toshiba Service Station 6.4.4 are up-to-date (except the file 'The Toshiba Video Player' won't not very far, I installed several times).

  kindly waiting for support.

  p.s.: I surfed online and came across the "upper filter registry values" (here's the link). With the help of regeditor.exe I just erased the "upper filter value" (from Hkeylocal machine\systems\currentcontrolset\class). Has nothing else.
  (http://blogs.msdn.com/b/usbcoreblog/...r-code-19.aspx)

  Error code 19 means that the configuration in the registry information is incomplete or damaged
  Check if this work around fix it:

  -Go to Device Manager, where you can see ODD list. Click on uninstall and click Scan for hardware changes to load a usable driver.
  -Then follow the procedure laid down in Article ID 929461 on the Microsoft Web site - http://smallbusiness.support.microso...n-us/kb/314060

  But I wonder why this problem appeared after the 8.1 Win update... I hope you followed the instructions step by step upgrade Win Toshiba 8.1:
  http://www.Toshiba.EU/innovation/Gen...ws8_1-message/

  Also check document this TSB Toshiba:
  http://APS2.toshiba-tro.de/KB0/FAQ2B03F10002R01.htm