CANON 70 D HAS NO POWER USING THE ADAPTER SECTOR OR 2 DIFFERENT BATTERIES
I WAS USING THE CAMERA THE DAY BEFORE, I BOUGHT THIS CAMERA IN DECEMBER 2013. I USED THIS CAMERA VERY SLIGHTLY.
TODAY, I WENT TO DOWNLOAD VIDEO FROM THE CAMERA TO CHANGE IT, BUT THE CAMERA WOULD NOT TURN USING THE A/C ADAPTER. I KNEW THAT NOTHING WAS WRONG WITH THE ADAPTER, BUT I PUT IN 2 DIFFERENT BATTERIES AFTER CHARING, THEM AND STILL NO POWER.
I HAVE REPEATED TO TRY THE A/C ADAPTER AND BATTERIES. I TRIED TO TAKE THE CARD, THE LENS AND MAKING SURE THAT THERE NOTHING PREVENTS THE CONTACTS FOR THE A/C OR BATTERY.
I STARTED SEARCHING ONLINE OF THE KNOWN FOR THE CANON 70 D ISSUES, I DIDN'T KNOW ANY SPECIFIC 70 D BUT I FOUND A FEW ISSUES FOR OTHER CAMERAS OF CANON WITH THE SAME QUESTION.
SOME WERE TOLD TO TAKE THE CARD AND THE LENS AND REPLACE IT WITH ANOTHER GOAL, THEN PLACE THE CARD BACK, AND THEN ADD THE BATTERIES AND THAT WILL FIX THE PROBLEM. IT DOES NOT WORK. ANOTHER VIDEO THAT I FOUND SAID THAT THERE WAS A SCREW LOOSE ON THE CIRCUIT BOARD PRINTED FOR THIS OLDER CANON CAMERA... HIS SCREWS SEEMED TO BE MORE IMPORTANT THAN THE SCREWS THAT THE 70 D A SO IT WILL BE VERY HARD FOR ME TO FIND A SCREW DRIVER THAT SMALL... I HAVE TO GO BUY A KIT. BUT NOT RADIO IM LOOKING AT THE BOTTOM OF MY CAMERA IF TAKE APART WILL WORK, IT SEEMS THAT MY CAMERA BODY COMES OFF AS NOT EASILY THAN VIDEO.
SO NOW IM STUCK WITH MANY PROJECTS VIDEO IM IN THE MIDDLE OF... BUT NOW I DON'T HAVE A CAMERA... I CAN'T AFFORD TO DO REPAIR, AND I CAN'T AFFORD TO BUY JUST ANOTHER CAMERA AND I'M NOT SURE IF THIS UNIT IS UNDER WARRANTY FROM CANON. I BOUGHT AT B & H PHOTO AND I STILL HAVE THE RECEIPT OF E-MAIL FROM THE PURCHASE.
https://www.YouTube.com/watch?v=FYlNyZ1IP3s
HAS ANYONE ELSE HAD THIS PROBLEM WITHT THE CANON 70 D?
AFTER VIEWING THE VIDEO SHOWING THE SCREW CAME OUT ON THE MOTHERBOARD OF THE PC, NOW I SHAKE MY CAMERA, I THINK I CAN HEAR SOMETHING MOVING INSIDE... BUT IT COULD BE MY IMAGINATION. I'M NOT 100% SURE, I HEAR SOMETHING LOOSE. IT REALLY SUCKS BECAUSE I CAN'T COMPLETE MY PROJECTS AND I'VE FITTED THE CASE OF MONEY THE NEW LENS CAMERA AND PURCHASE HAS RECENTLY...
IF YOU CAN NOT SAY THAT IT IS THE BATTERIES BECAUSE IM ALSO USING AN A/C ADAPTER. I KNOW HOW TO TURN ON THE CAMERA! IM GETTING NOTHING. NO POWER,
I NEED HELP.
I CORRECTED MY OWN QUESTION.
WHAT WOULD HAVE COST ME HUNDREDS OF DOLLARS BY SENDING IT TO CANON, I MANAGED TO SOLVE THIS PROBLEM AND PERHAPS OTHERS HAVE HAD THE SAME PROBLEM AND THEY MAY HAVE SPENT MONEY UNNECESSARY. I SPENT ONLY $6 AND A FEW CHANGES... ALLOWS CALL HIM $7 TO SOLVE THIS PROBLEM.
I DON'T HAVE TO DISASSEMBLE THE APPLIANCE BUT AS HE TRIED TO DO, I SAW SOMETHING THAT I SUSPECTED WAS THE QUESTION. I PLAYED A BIT WITH THIS SWITCH OR SOME TYPE OF CENSORSHIP OR LOCK.
SOMETHING LIKE THIS WAS SO SIMPLE TO SOLVE, BUT COULD HAVE COST ALLOT ME OF MONEY. THE PART IS TOO DELICATE. NOW THAT I'M AWARE OF THIS, I CAN BE MORE CAREFUL, BECAUSE I WAS ALREADY VERY CAREFUL WITH ALL MY CANON... BUT IT WAS SOMETHING I WOULD HAVE NEVER EXPECTED THAT IS THE PROBLEM, I SAW THAT HOLE SOONER BUT NA NOT KNOWING WHAT IT WAS FOR... WHILE I WAS GETTING READY TO TAKE OFF THE BATTERY COVER, I NOTICED SHE HAD A TYPE OF CONNECTOR THAT WOULD GO IN THE HOLE (SQUARE) SO I SIMPLY PUT A PEN IN THE HOLE AND THERE IS A SWITCH OR SOMETHING, I PUT THE SWITCH IN THE CENTER. I PUT THE BATTERY IN THE CAMERA, AND THEN HE CAME.
https://www.YouTube.com/watch?v=nBmtTQn3RlE
Tags: Canon Camera
Similar Questions
-
I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?
I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?
Is it possible to get the procedure to use feature stich photo?
Will be Zoombrowser EX for windows 10 wotk?
If any expert can guide me... that will be great.
Hi Sat17,
Thank you for your inquiry.
For Windows 8 and beyond, ZoomBrowser EX has been replaced by EX. ImageBrowser
Your software you will need to updated for Windows 10.
You can access the software for your camera by clicking here. Once on our site, scroll down to "Drivers and downloads", then use the drop down menu to choose "8.1 Windows" or "Windows 8.1 (x 64)".» Your camera software has not been updated for Windows 10, but for Windows 8.1 software will run on your computer.
To update your software, click the [Select] button to the right, then click on "How to download and install" for installation instructions.
-
How can know you if someone has consulted and used the default Administrator account in Vista?
I was not aware that the default Administrator account is so easily accessible if there is no password on it. In my view, a standard user has accessed this and it seems that the computer is having a lot of problems now. Is there a way to tell? Needless to say I care that much personal info could acceded as well as commercial information. Security, 3 administartors (users) appears in some of the boxes, and I only know 2 of them, myself and the default admin? I'm a recruit of the computer and the other person is somewhat a geek so I could really use some help. I am the system administrator, but don't really know what to look for. I would really appreciate if some wiz could help me.
Thank you
Hello
You can't find if someone has consulted and used the default Administrator account in Vista. You will need to set up a password so that no one will be able to access the admin account.
-
I moved a listener on a host in a House different oracle. The headset works fine, but EM 12 c shows that the listener is down with the following summary:The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file. CORRECTIVE ACTION: To monitor this "EM listener target" with its current configuration, you must stop the process of listening running and start it using the Listener parameter file: opt/oracle/product/12.1.0.2/network/admin/listener.ora. Alternatively, you can update "this target LISTENER. Location ORA setting"with the location of the listener running, which started using the: opt/oracle/product/11.2.0.3/network/admin/listener.ora.
EM 11 g, I simply changed the configuration of the listener for the different oracle home, argued the change and in a few minutes the listener would show that 'UP' with the oracle of new home. I upgraded to MS 12 c (12.1.0.4) and can't find how to do this. Can someone give me the procedure.
Thank you
Ron
Hi Ron,
Can you please do the following?
-Create a for the listener listener.ora file, stop and start the receiver using the listener.ora file. If the file is located in a default location, set the TNS_ADMIN environment variable to that location before you start the listener.
-Log on to the EM console, go to the homepage of the listener.
-In the Oracle Listener menu, select target Configuration > Configuration of the analysis.
-Ensure that the parameters, including the Listener.ora directory, are properly.
Kind regards
-Loc
-
How to use the adapter from the wall with my Mac Pro laptop?
How to use the adapter from the wall with my Mac Pro laptop?
The AC wall connector is not compatible with the outlet on the MBP? As the MBP charger will work from 100v to 240v, a transformer is necessary. You need a converter that connects to the power outlet home and is compatible with your MBP. You can buy the Apple travel kit:
http://www.Apple.com/shop/product/MD837AM/A/Apple-world-travel-adapter-Kit
Or you can use a single specific converter for the geographical area:
(it is a UK USA example)
Or you can get the converter that adapts the charger directly:
(again, this is for a UK plug.)
Ciao.
-
WRT160N performance using the adapter G
IM about to buy a new router and stores near my place are all embellished wireless routers N. Im planning to get the WRT160N, but the problem is that my laptop has wireless g adapter.
So my question is how will performance be since the adapter/router combo is different? I know that I will have no gain, but it's going as good N Router work a G router would be on a G adapter?
Thanks in advance.
P.S im running windows Xp on the laptop.
If your laptop has a built-in wireless card so its only going to get 54 Mbps. If you have a Wireless N router you will need to get a Wireless N adapter in order to reach up to 300 Mbit/s speeds.
You may need to configure the router from N to B & G in wireless mode settings. This can frustrate the point in getting a N.
Given the low cost of wireless adapters can be better to upgrade both at the same time and ensure compatibility and performance (perhaps).However, the two will work together.
-
ADF mobile: how to download a file by using the adapter remains api
Hello
I want to download files using the adapter. How would download files like PDFs, images (png, jpg...) etc... Some code would be appreciated.
Thank you
Ok
After days of headaches, there is a way to send files using the adapter and the code above for the side server. Even if it's a big fall in mobile ADF perspective they have no api for this.
To download a txt file, you can simply copy and paste the text file into a string and have the string supplemented with appropriate limit values and padding values ('\r\n') before and after the string.
To transfer a binary file, you must convert the file to a base64 string, then put it in the form mentioned above.
then you can send it as follows:
restAdapter.send (fileString);
Don't forget to add the appropriate headers.
content type
and
definitions of values to the limits
-
Please God. turn off this product. Your help desk services do not work, cannot turn off. I use the retail SECTOR, xi of adobe acrobat. Connected to the internet. On more than 20 min. open for disable grayed out. Windows 7 pro x 64. This shit makes people use fraud. I just want what it OFF can be USED on another COMPUTER.
can anyone in the customer support to disable this?
Hello Terry,
I checked the serial number and found that you have enough number of activations left to install on 2 computers.
Please uninstall the software and activate it on another machine. In case of problems please let me know and I'll help you.
My direct email: [email protected]
Chat Support email:
http://helpx.Adobe.com/x-productkb/global/Service1.html Kind regards
Rave
-
VM Player has no power on the virtual machine
Hello
I use VMS 6.0.1 player but not in power on a virtual machine, the error log which im getting is below. can kindly help me on this.
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: Log for VMware Player pid = 4964 version 6.0.1 = build = build-1379776 option = output
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: The process is 64-bit.
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: Host = encoding windows-1252 = windows-1252 codepage
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: Host is Windows 8 Enterprise, 64-bit (Build 9200)
2014 06-27 T 10: 11:24.893 + 05:30 | VMX | I120: VTHREAD initialize main thread id 0 "vmx" host 2868
2014 06-27 T 10: 11:24.893 + 05:30 | VMX | I120: REGIONAL windows-1252-> user NULL = 409 system settings = 409
2014 06-27 T 10: 11:24.893 + 05:30 | VMX | I120: Msg_SetLocaleEx: HostLocale = windows-1252 UserLocale = NULL
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: not reproducible error (workstation C:\ProgramData\VMware\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: not reproducible error (workstation C:\ProgramData\VMware\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: not reproducible error (workstation C:\ProgramData\VMware\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: Msg_Reset:
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: [msg.dictionary.load.openFailed] cannot open the file 'C:\Users\Administrator\AppData\Roaming\VMware\config.ini': the system cannot find the specified file.
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: ----------------------------------------
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: ConfigDB: cannot load C:\Users\Administrator\AppData\Roaming\VMware\config.ini
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: OBJLIB-LIB: Objlib initialized.
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: not reproducible error (C:\ProgramData\VMware\VMware player): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: not reproducible error (C:\ProgramData\VMware\VMware player): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: not reproducible error (C:\ProgramData\VMware\VMware player): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: Msg_Reset:
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: [msg.dictionary.load.openFailed] cannot open the file 'C:\Users\Administrator\AppData\Roaming\VMware\config.ini': the system cannot find the specified file.
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: ----------------------------------------
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: Optional preferences PREFS not found in C:\Users\Administrator\AppData\Roaming\VMware\config.ini file. Using the default values.
2014 06-27 T 10: 11:24.971 + 05:30 | VMX | I120: FILE: FileLockDynaLink: other process validation tools are: available
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: Hostname = ADITIDT821.aditi.tech
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: IP = fe80::d037:11 has 4: c71c:6eb3 50%
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: IP = fe80::bd13:9dfc:fb5f:6452% 49
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: IP = fe80::3152:2dc5:a437:a08d % 12
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: IP = 192.168.30.1
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: IP = 192.168.229.1
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: IP = 172.20.151.102
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: HOSTINFO 689913608 @ 1948232Hz-> 0 Hz 1000000000
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: HOSTINFO ((x * 2152877070) > > 22) +-354122921691
2014 06-27 T 10: 11:25.033 + 05:30 | VMX | I120: System uptime 353942880 us
2014 06-27 T 10: 11:25.033 + 05:30 | VMX | I120: command line: "C:\Program Files (x 86) \VMware\VMware" "-ssnapshot.numRollingTiers = 0" "-sRemoteDisplay.vnc.enabled = FALSE" "-s" "vmx.stdio.keep = TRUE" "-#" "product = 4; name = VMware Player; version 6.0.1 =; BuildNumber = 1379776; licensename = VMware Player; licenseversion = 6,0; ""-@ ""pipe=\\.\pipe\vmx5f7cda9929347a3d;" «E:\SOASTA\CloudTest Lite vmwarevm\CloudTest Lite.vmx.»
2014 06-27 T 10: 11:25.033 + 05:30 | VMX | I120: Msg_SetLocaleEx: HostLocale = windows-1252 UserLocale = NULL
2014 06-27 T 10: 11:25.254 + 05:30 | VMX | I120: Connection "ui" in the pipe "\\.\pipe\vmx5f7cda9929347a3d' user '(null) '.
2014 06-27 T 10: 11:25.255 + 05:30 | VMX | I120: VMXVmdb: local connection timeout: 60000 ms.
2014 06-27 T 10: 11:25.388 + 05:30 | VMX | I120: VmdbAddConnection: cnxPath = / db/connection / #1 /, cnxIx = 1
2014 06-27 T 10: 11:25.482 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:475]: VMAutomation: initialize VMAutomation.
2014 06-27 T 10: 11:25.482 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:772]: VMAutomationOpenListenerSocket() to listen
2014 06-27 T 10: 11:25.501 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0
2014 06-27 T 10: 11:25.501 + 05:30 | VMX | I120: Past vmx/execState/val of poweredOff
2014 06-27 T 10: 11:25.501 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0
2014 06-27 T 10: 11:25.501 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 2, newAppState = 1877, success = 1 additionalError = 0
2014 06-27 T 10: 11:25.501 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 3, newAppState = 1881, success = 1 additionalError = 0
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: HD: version of the host is 6.2.9200
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: HD: addr fffff801dfcb6470
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: HD: fffff801dff6f180, 0
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Limit locked delta-2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Locked limit delta 2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Limit locked delta-2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Locked limit delta 2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Limit locked delta-2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Locked limit delta 2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Limit locked delta-2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Locked limit delta 2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Limit locked delta-2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Locked limit delta 2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: VerificationOfHostParameters status 0
2014 06-27 T 10: 11:26.266 + 05:30 | VMX | I120: FeatureCompat: masks VCA:
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID vendor: GenuineIntel
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID family: 0 x 6 model: 0xf stepping: 0xd
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID codename: Woodcrest/Conroe/Merom (Core)
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID name: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00GHz
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID 00000000, 0 level: 0x0000000a 0x756e6547 0x6c65746e 0x49656e69
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000001, 0: 0x000006fd 0 x 00010800 0x0000e39d 0xafebfbff
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID 00000002, 0 level: 0x05b0b101 0x005657f0 0 x 00000000 0x2cb4307d
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000003, 0: 0x00000000 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000004, 0: 0 x 00000121 0x0000003f 0x01c0003f 0x00000001
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000004, 1: 0 x 00000122 0x0000003f 0x01c0003f 0x00000001
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000004, 2: 0 x 00000143 0x01c0003f 0x00000fff 0x00000001
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000004, 3: 0 x 00000000 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000005, 0: 0 x 00000040 00000040 0 x 0 x 00000003 0 x 00000220
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID 00000006, 0 level: 0x00000001 0x00000002 0x00000001 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID 00000007, 0 level: 0x00000000 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID 00000008, 0 level: 0 x 00000400 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000009, 0: 0x00000000 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 0000000, 0: 0 x 07280202 0x00000000 0x00000000 0 x 00000503
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000000, 0: 0 x 80000008 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000001, 0: 0x00000000 0x00000000 0x00000001 0 x 20100800
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000002, 0: 0x65746e49 0x2952286c 0x726f4320 0x4d542865
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000003, 0: 0 44203229 0x43206f75 x 20205550 x 0 0 x 45202020
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000004, 0: 0 x 30303434 0 x 20402020 0x30302e32 0x007a4847
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000005, 0: 0x00000000 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000006, 0: 0x00000000 0x00000000 0 x 08006040 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000008, 0: 0 x 00003024 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: CPUID of hostCPUID differences.
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: CPUID Maximum physical address Bits supported on all processors: 36
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0x3a = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 480 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 481 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 482 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 483 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 484 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 485 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 486 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 487 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 488 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 489 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0x48a = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0x48b = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0x48c = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0x48d = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0x48e = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0x48f = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 490 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 491 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0xc0010114 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0xce = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: VMMon_GetkHzEstimate: calculated 1994989 kHz
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: HOSTINFO: host does not support the constant rate of TSC.
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: VMMon_RememberkHzEstimate: calculated 1994989 kHz
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: TSC kHz estimates: vmmon 1994989, 1994989, osReported 1995000 recalled. With the help of 1994989 kHz.
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: TSC of measured first delta 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Min TSC Delta 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: PTSC: RefClockToPTSC 0 1948232 Hz-> 0 to 1994989000 Hz
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: PTSC: RefClockToPTSC ((x * 4294966073) > > 22) +-709145112373
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: PTSC: tscOffset-764437781500
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: PTSC: using TSC
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: PTSC: material TSCs are synchronized.
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: PTSC: PTSC current = 244170
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: VMIOP: Init began
2014 06-27 T 10: 11:26.376 + 05:30 | VMX | I120: MACWireless: "emulated" registered wireless module
2014 06-27 T 10: 11:26.376 + 05:30 | VMX | I120: ConfigCheck: no rules file found. Controls are disabled.
2014 06-27 T 10: 11:26.376 + 05:30 | VMX | I120: change directory to E:\SOASTA\CloudTest Lite. vmwarevm\.
2014 06-27 T 10: 11:26.376 + 05:30 | VMX | I120: Config file: E:\SOASTA\CloudTest Lite. vmwarevm\CloudTest Lite.vmx
2014 06-27 T 10: 11:26.391 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0
2014 06-27 T 10: 11:26.391 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 2, newAppState = 1878, success = 1 additionalError = 0
2014 06-27 T 10: 11:26.391 + 05:30 | VMX | I120: FILE: FileDeletionRetry: not reproducible error (E:\SOASTA\CloudTest Lite.vmwarevm\vmware-2.log): the system cannot find the specified file (2)
2014 06-27 T 10: 11:26.485 + 05:30 | VMX | I120: VMXVmdbCbVmVmxExecState: change of State Exec asked State receiver without reset, soft, softOptionTimeout: 0.
2014 06-27 T 10: 11:26.485 + 05:30 | VMX | I120: Tools: sending of 'OS_PowerOn' (status = 3) request state change
2014 06-27 T 10: 11:26.485 + 05:30 | VMX | I120: Tools: delay demand for change from State to State 3.
2014 06-27 T 10: 11:26.485 + 05:30 | VMX | W110: PowerOn
2014 06-27 T 10: 11:26.485 + 05:30 | VMX | I120: VMX_PowerOn: VMX build 1379776, UI build 1379776
2014 06-27 T 10: 11:26.500 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1871, success = 1 additionalError = 0
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: HOST Windows version 6.2, build 9200, platform 2, «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT---C:\Users\Administrator\AppData\Roaming\VMware\preferences.ini USER PREFERENCES
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.license.maxNum = '1 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.license0.version = "10.0"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.license0.registrationViewed = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.license0.lastEvalReminder = '30 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.hostMRU.count = '1 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.hostMRU0.name = "localhost".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window.count = '1 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.tab.count = '1 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.tab0.dest = «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.tab0.file = "C:\Users\Administrator\Documents\Virtual Machines\Windows XP Professional\Windows XP Professional.vmx"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.tab0.type = "vm".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.tab0.focused = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.sidebar = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.sidebar.width = "200".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.statusBar = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.tabs = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.thumbnailBar = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.thumbnailBar.size = "100".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.thumbnailBar.view = 'open-vms.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.placement.left = "130".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.placement.top = "130".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.placement.right = '1070 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.placement.bottom = "739".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.maximized = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmWizard.guestKey = "winxppro.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmWizard.installMediaType = 'iso '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmWizard.isoLocationMRU.count = '1 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmWizard.isoLocationMRU0.location = "F:\XP 32bit\en_winxp_pro_x86_build2600_iso.iso".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: = DICT pref.mruVM0.filename ' E:\SOASTA\CloudTest Lite vmwarevm\CloudTest Lite.vmx '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.mruVM0.displayName = "CloudTest Lite"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.mruVM0.index = '0 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.eula.count = '1 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.eula0.product = 'VMware Player'
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.eula0.build = "1410761".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - default USER IS C:\Users\Administrator\AppData\Roaming\VMware\config.ini
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - HOST by default IS C:\ProgramData\VMware\VMware Player\config.ini
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled.epoch = "32552.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.componentDownloadEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled.epoch = "32552.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.simplifiedUI = 'no '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - SITE by default IS C:\ProgramData\VMware\VMware Player\config.ini
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled.epoch = "32552.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.componentDownloadEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled.epoch = "32552.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.simplifiedUI = 'no '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - NON PERSISTENT
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT snapshot.numRollingTiers = '0 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT RemoteDisplay.vnc.enabled = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmx.stdio.keep = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT gui.available = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - COMMAND LINE
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT snapshot.numRollingTiers = '0 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT RemoteDisplay.vnc.enabled = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmx.stdio.keep = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT gui.available = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - REGISTRATION
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT snapshot.numRollingTiers = '0 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT RemoteDisplay.vnc.enabled = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmx.stdio.keep = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT gui.available = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - CONFIGURATION E:\SOASTA\CloudTest Lite. vmwarevm\CloudTest Lite.vmx
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT config.version = '8 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT virtualHW.version = '8 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT scsi0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT scsi0.virtualDev = "free".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT memsize = "2048".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.connectionType = "bridged".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.virtualDev = "e1000".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.wakeOnPcktRcv = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.addressType = "generated".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.linkStatePropagation.enable = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ehci.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT sound.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT sound.fileName = "-1".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT sound.autodetect = "TRUE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT serial0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT serial0.fileType = "thinprint".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge4.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge4.virtualDev = "pcieRootPort"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge4.functions = '8 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge5.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge5.virtualDev = "pcieRootPort"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge5.functions = '8 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge6.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge6.virtualDev = "pcieRootPort"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge6.functions = '8 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge7.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge7.virtualDev = "pcieRootPort"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge7.functions = '8 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmci0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT roamingVM.exitBehavior = 'go '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT tools.syncTime = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT displayName = "CloudTest Lite"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT guestOS = "centos-64.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT nvram = "CloudTest Lite.nvram"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT virtualHW.productCompatibility = "hosted".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT printers.enabled = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT proxyApps.publishToHost = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT tools.upgrade.policy = "upgradeAtPowerCycle".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT powerType.powerOff = 'soft '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT powerType.powerOn = 'soft '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT powerType.suspend = 'soft '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT powerType.reset = 'soft '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT extendedConfigFile = "CloudTest Lite.vmxf"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT numvcpus = '1 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.generatedAddress = "00: 0C: 29:f1:09:11.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT uuid.location = "56 4 d c3 7 c ec 7f 2A 8 c - e5 28 c1 d7 35 09 11 f1"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT uuid.bios = "56 4 d c3 7 c ec 7f 2A 8 c - e5 28 c1 d7 35 09 11 f1"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT cleanShutdown = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT replay.supported = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT replay.filename = «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge0.pciSlotNumber = "17".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge4.pciSlotNumber = "21".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge5.pciSlotNumber = "22".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge6.pciSlotNumber = "23".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge7.pciSlotNumber = "24".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT scsi0.pciSlotNumber = "16".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb.pciSlotNumber = "32".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.pciSlotNumber = "33".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT sound.pciSlotNumber = "34".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ehci.pciSlotNumber = "35".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmci0.pciSlotNumber = '36 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmotion.checkpointFBSize = "67108864.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.generatedAddressOffset = '0 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmci0.id = "1042150165".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT tools.remindInstall = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT uuid.action = "crΘer".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT msg.autoAnswer = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.vnet = "vmnet2.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.bsdName = 'en0 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.displayName = 'Ethernet '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ide0:1.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ide0:1.fileName = "virtual disk 2.vmdk.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ide0:1.redo = «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT hpet0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb.vbluetooth.startConnected = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vcpu.hotadd = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT mem.hotadd = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:1.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT softPowerOff = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:1.speed = '2 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:1.deviceType = "hub".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:1.port = "1".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:1.parent = "-1".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT checkpoint.vmState = «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT bios.bootOrder = «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT bios.hddOrder = «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:0.deviceType = 'hidden '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:0.port = '0 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:0.parent = "-1".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT monitor.phys_bits_used = "40".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT workingDir = "."
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ide1:0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ide1:0.fileName = "Virtual Disk.vmdk".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ide1:0.redo = «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ide0:0.present = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT scsi0:0.present = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT floppy0.present = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - default USER IS C:\Users\Administrator\AppData\Roaming\VMware\config.ini
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - HOST by default IS C:\ProgramData\VMware\VMware Workstation\config.ini
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled = 'no '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled.epoch "13961 =."
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.componentDownloadEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled = 'no '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled.epoch "13961 =."
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT authd.client.port = "903".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: = DICT authd.proxy.nfc "vmware - pass: ha - nfc".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - SITE by default IS C:\ProgramData\VMware\VMware Workstation\config.ini
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled = 'no '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled.epoch "13961 =."
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.componentDownloadEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled = 'no '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled.epoch "13961 =."
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT authd.client.port = "903".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: = DICT authd.proxy.nfc "vmware - pass: ha - nfc".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - Workstation\settings.ini C:\ProgramData\VMware\VMware GLOBAL SETTINGS
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0
2014 06-27 T 10: 11:26.594 + 05:30 | VMX | I120: hostCpuFeatures = 0x4000fc
2014 06-27 T 10: 11:26.594 + 05:30 | VMX | I120: hostNumGenPerfCounters = 2
2014 06-27 T 10: 11:26.594 + 05:30 | VMX | I120: hostNumFixedPerfCounters = 3
2014 06-27 T 10: 11:26.594 + 05:30 | VMX | I120: hostPerfCtrArch = 2
2014 06-27 T 10: 11:26.594 + 05:30 | VMX | I120: CPU0: PMC: IA32, CORE 2 [c: 0 e f: 1: 1]
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120: MONITOR MODE: license modes: BT
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120: MONITOR MODE: user requested modes: BT HV HWMMU
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120: MONITOR MODE: favorite guestOS of modes: HWMMU BT HT
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120: MONITOR MODE: filtered list: BT
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120: MsgHint: msg.monitor.BTnoLM2
2014-06 - 27 T 10: 11:26.610 + 05:30 | vmx | I120 + binary translation is incompatible with the long mode on this platform. Long mode will be disabled in this virtual environment. Applications that require a long mode will not work correctly as a result. See http://vmware.com/info?id=152 for more details.
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120+ ---------------------------------------
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120: MsgIsAnswered: use builtin default 'OK' as the answer to "msg.monitor.BTnoLM2".
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120: HV settings: virtual exec = "software"; MMU virtual = "software".
2014 06-27 T 10: 11:26.828 + 05:30 | VMX | I120: OvhdMem_PowerOn: lib/overheadmem: paged 339753 non paged 16207 anonymous 37190
2014 06-27 T 10: 11:26.828 + 05:30 | VMX | I120: OvhdMem_PowerOn: first admission: paged 181587 non paged 36393 anonymous 8432
2014 06-27 T 10: 11:26.828 + 05:30 | VMX | I120: VMMEM: initial booking: 16776052 Mo (MainMem = 2048MB)
2014 06-27 T 10: 11:26.828 + 05:30 | VMX | I120: MemSched_PowerOn: minGuestSize ball 52428 (80% size required min 65536)
2014 06-27 T 10: 11:26.828 + 05:30 | VMX | I120: MemSched: mem reserved (in MB) min max recommended 128 2973 2973
2014 06-27 T 10: 11:26.828 + 05:30 | VMX | I120: PShare: activated 1 1 Adaptive scanRate [16, 400]
2014 06-27 T 10: 11:26.828 + 05:30 | VMX | I120: MemSched: mem 8432 524288 np 36393 pg 181587 anon
2014 06-27 T 10: 11:26.921 + 05:30 | VMX | I120: MemSched: numvm 1 locked pages: num 0 max 752896
2014 06-27 T 10: 11:26.921 + 05:30 | VMX | I120: MemSched: locked Page limit: host 917427 config 761088 dynam 805822
2014 06-27 T 10: 11:26.921 + 05:30 | VMX | I120: MemSched: minmempct 50 minalloc 0 admitted 1
2014 06-27 T 10: 11:26.921 + 05:30 | VMX | W110: NUMA: application of automatic dimensioning VM ignored
2014 06-27 T 10: 11:26.984 + 05:30 | VMX | I120: LICENSE: running in restricted mode
2014 06-27 T 10: 11:26.984 + 05:30 | WinNotifyThread | I120: Host Id 4 "WinNotifyThread" start thread 2856 VTHREAD
2014 06-27 T 10: 11:26.984 + 05:30 | WinNotifyThread | I120: WinNotify thread is alive
2014 06-27 T 10: 11:27.030 + 05:30 | vthread-5 | I120: VTHREAD start thread id 'vthread-5' 5, host 2860
2014 06-27 T 10: 11:27.030 + 05:30 | VMX | I120: PolicyVMXFindPolicyKey: policy file does not exist.
2014 06-27 T 10: 11:27.077 + 05:30 | VMX | I120: PolicyVMXFindPolicyKey: policy file does not exist.
2014 06-27 T 10: 11:27.218 + 05:30 | VMX | I120: IPI vectors host: 0 0. Vector monitor IPI: 0
2014 06-27 T 10: 11:27.218 + 05:30 | VMX | I120: Monitor_PowerOn: HostedVSMP tilt followed is disabled
2014 06-27 T 10: 11:27.218 + 05:30 | VMX | I120: Monitor64_PowerOn()
2014 06-27 T 10: 11:27.218 + 05:30 | VMX | I120: Worldswitch support: .wsBody64. Size = 480.
2014 06-27 T 10: 11:27.218 + 05:30 | VMX | I120: Load correctly .switchNMI worldswitch error handlers. Size = 240.
2014 06-27 T 10: 11:27.218 + 05:30 | VMX | I120: vmm64-modules: [vmm.vmm64, mmu - nohv.vmm64, vprobe - none.vmm64, hv - none.vmm64, gphys - sw.vmm64, none.vmm64-vmsafe, callstack - vmce, none.vmm64 - none.vmm64, vvtd - none.vmm64, {SharedInterVcpuVmxSection}, {SharedInterVcpuSection}, < MonSrcFile >, hvLoadedAsAddr = 0 x 0, useNPTAsAddr = 0 x 0, vcpusetFullAsAddr = 0 x 1, numVCPUsAsAddr = 0 x 1, busmemFrameMPNOffsetAsAddr = 0xc, busmemFramesPerPgDivSh2AsAddr = 0 x 7, busmemFramesPerPgDivSh1AsAddr = 0 x 1, busmemFramesPerPgDivMulAsAddr = 0 x 100000000, busmemFramesPerPageAsAddr = 0 x 100, busmemFrameSizeAsAddr = 0 x 10]
2014 06-27 T 10: 11:27.218 + 05:30 | VMX | I120: vmm64-vcpus: 1
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: KHZEstimate 1994989
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: MHZEstimate 1995
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: NumVCPUs 1
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: BusMemServices: checkRate page 16
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: UUID: UUID location is 56 4 d 5f d3 5 d comics 48 fb - 9f e3 76 40 63 bc 0 df
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: UUID: UUID location is 56 4 d c3 7 c ec 7f 2A 28 c1 d7 35 09 11 f1 8 c - e5
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: UUID: UUID location is 56 4 d c3 7 c ec 7f 2A 28 c1 d7 35 09 11 f1 8 c - e5
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: AIOGNRC: numThreads = 5 = 2 ide, scsi = 0, = 0 passthru
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: WORKER: create the new group with numThreads = 5 (5)
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: FILE: FileDeletionRetry: not reproducible error (E:\SOASTA\CloudTest Lite. vmwarevm\CloudTest Lite.vmx ~): the system cannot find the specified file (2)
2014 06-27 T 10: 11:27.436 + 05:30 | VMX | I120: StateLogger::Replay State = 0
2014 06-27 T 10: 11:27.436 + 05:30 | VMX | I120: StateLogger::minDEThreshold: 70
2014 06-27 T 10: 11:27.436 + 05:30 | VMX | I120: FILE: FileDeletionRetry: not reproducible error (E:\SOASTA\CloudTest Lite. vmwarevm\CloudTest Lite.vmx ~): the system cannot find the specified file (2)
2014 06-27 T 10: 11:27.607 + 05:30 | VMX | I120: WORKER: create the new group with numThreads = 1 (6)
2014 06-27 T 10: 11:27.607 + 05:30 | VMX | I120: MainMem: CPT host WZ = 0 SLEEP = 1 PF = 2048 D = 0
2014 06-27 T 10: 11:27.607 + 05:30 | VMX | I120: MainMem: CPT PLS = 1 PLR = 1 BS = 1 BufM = 0 Hamza_slm = 32 Mult = 4 W = 50
2014 06-27 T 10: 11:27.607 + 05:30 | VMX | I120: UUID: UUID location is 56 4 d c3 7 c ec 7f 2A 28 c1 d7 35 09 11 f1 8 c - e5
2014 06-27 T 10: 11:27.623 + 05:30 | VMX | I120: MainMem: open paging file, 'E:\SOASTA\CloudTest Lite.vmwarevm\564dc37c-ec7f-2a8c-e528-c1d735f10911.vmem '.
2014 06-27 T 10: 11:27.623 + 05:30 | VMX | I120: MMCHK: disabling of controls that are not forced, cannot make controls on some processors.
2014 06-27 T 10: 11:27.623 + 05:30 | VMX | I120: MStat: creation vm.uptime Stat
2014 06-27 T 10: 11:27.623 + 05:30 | VMX | I120: MStat: creation vm.suspendTime Stat
2014 06-27 T 10: 11:27.623 + 05:30 | VMX | I120: MStat: creation vm.powerOnTimeStamp Stat
2014 06-27 T 10: 11:27.623 + 05:30 | aioCompletion | I120: VTHREAD start thread id 6 'aioCompletion' host 1684
2014 06-27 T 10: 11:27.670 + 05:30 | VMX | I120: VMXAIOMGR: using the: simple = unbuf generic = Compl
2014 06-27 T 10: 11:27.732 + 05:30 | VMX | I120: WORKER: create the new group with numThreads = 1 (7)
2014 06-27 T 10: 11:27.857 + 05:30 | VMX | I120: WORKER: create the new group with numThreads = 16 (23)
2014 06-27 T 10: 11:27.857 + 05:30 | Worker #0 | [I120: DRIVE: OPEN ide0:1 '2.vmdk E:\SOASTA\CloudTest Lite. disc vmwarevm\Virtual' persistent R]
2014 06-27 T 10: 11:27.872 + 05:30 | vthread-7 | I120: 7 'vthread-7' host Id of the thread to start VTHREAD 2848
2014 06-27 T 10: 11:27.872 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [0]: "virtual disk 2 - s001.vmdk ' (0xa)
2014 06-27 T 10: 11:27.872 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [1]: "virtual disk 2 - s002.vmdk ' (0xa)
2014 06-27 T 10: 11:27.872 + 05:30 | Worker #1 | I120: DRIVE: OPEN ide1:0 ['E:\SOASTA\CloudTest Lite vmwarevm\Virtual Disk.vmdk.' R persistent]
2014 06-27 T 10: 11:27.872 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [2]: "virtual disk 2 - s003.vmdk ' (0xa)
2014 06-27 T 10: 11:27.872 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [3]: "virtual disk 2 - s004.vmdk ' (0xa)
2014 06-27 T 10: 11:27.872 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [4]: "virtual disk 2 - s005.vmdk ' (0xa)
2014 06-27 T 10: 11:27.888 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [5]: "virtual disk 2 - s006.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [6]: "virtual disk 2 - s007.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [7]: ' virtual disk 2 - s008.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [8]: "virtual disk 2 - s009.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [9]: "virtual disk 2 - s010.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [0]: "Virtual Disk - s001.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [10]: "virtual disk 2 - s011.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #0 | I120: DISKLIB-LINK: open '2.vmdk E:\SOASTA\CloudTest Lite. disc vmwarevm\Virtual' (0xa): twoGbMaxExtentSparse, 41943040 sectors / 20 GB.
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #0 | I120: DISKLIB-LIB: open "disk Lite. vmwarevm\Virtual E:\SOASTA\CloudTest 2.vmdk" (flags 0xa, type twoGbMaxExtentSparse).
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [1]: "Virtual Disk - s002.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [2]: "Virtual Disk - s003.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [3]: "Virtual Disk - s004.vmdk ' (0xa)
2014 06-27 T 10: 11:27.935 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [4]: "Virtual Disk - s005.vmdk ' (0xa)
2014 06-27 T 10: 11:27.935 + 05:30 | Worker #0 | I120: DiskGetGeometry: reading the disk partition table
2014 06-27 T 10: 11:27.935 + 05:30 | Worker #0 | I120: DISK: "2.vmdk' E:\SOASTA\CloudTest Lite. vmwarevm\Virtual Disk drive has 60 00 c2 9A UUID 0e 63 6f - ca 06 53 32 43 c7 e9 eb f3'
2014 06-27 T 10: 11:27.935 + 05:30 | Worker #0 | I120: DRIVE: OPEN "E:\SOASTA\CloudTest Lite. vmwarevm\Virtual Disk 2.vmdk" Geo (41610/16/63) BIOS Geo (44384/15/63)
2014 06-27 T 10: 11:27.935 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [5]: "Virtual Disk - s006.vmdk ' (0xa)
2014 06-27 T 10: 11:27.997 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [6]: "Virtual Disk - s007.vmdk ' (0xa)
2014 06-27 T 10: 11:28.044 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [7]: ' Virtual Disk - s008.vmdk ' (0xa)
2014 06-27 T 10: 11:28.075 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [8]: "Virtual Disk - s009.vmdk ' (0xa)
2014 06-27 T 10: 11:28.091 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [9]: "Virtual Disk - s010.vmdk ' (0xa)
2014 06-27 T 10: 11:28.122 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [10]: "Virtual Disk - s011.vmdk ' (0xa)
2014 06-27 T 10: 11:28.122 + 05:30 | Worker #1 | I120: DISKLIB-LINK: "E:\SOASTA\CloudTest Lite. vmwarevm\Virtual Disk.vmdk" (0xa): twoGbMaxExtentSparse, 41943040 sectors / 20 GB.
2014 06-27 T 10: 11:28.122 + 05:30 | Worker #1 | I120: DISKLIB-LIB: open "E:\SOASTA\CloudTest Lite. vmwarevm\Virtual Disk.vmdk" (flags 0xa, twoGbMaxExtentSparse type).
2014 06-27 T 10: 11:28.122 + 05:30 | Worker #1 | I120: DiskGetGeometry: reading the disk partition table
2014 06-27 T 10: 11:28.138 + 05:30 | Worker #1 | I120: DISK: disk ' E:\SOASTA\CloudTest Lite. vmwarevm\Virtual Disk.vmdk ' has UUID 60 c2 00 90 fd b7 14 db - bc f1 f9 76 cc 7 20 8 b '
2014 06-27 T 10: 11:28.138 + 05:30 | Worker #1 | I120: DRIVE: OPEN "E:\SOASTA\CloudTest Lite. vmwarevm\Virtual Disk.vmdk" Geo (41610/16/63) BIOS Geo (2610/255/63)
2014 06-27 T 10: 11:28.325 + 05:30 | Worker #0 | I120: DISKUTILWIN32: DiskUtilW32IsATASSDDevice: reported = 0 speed
2014 06-27 T 10: 11:28.559 + 05:30 | Worker #1 | I120: DISKUTILWIN32: DiskUtilW32IsATASSDDevice: reported = 0 speed
2014 06-27 T 10: 11:28.559 + 05:30 | VMX | I120: FILE: FileDeletionRetry: not reproducible error (E:\SOASTA\CloudTest Lite. vmwarevm\CloudTest Lite.vmx ~): the system cannot find the specified file (2)
2014 06-27 T 10: 11:28.714 + 05:30 | VMX | I120: DISC: discs of opening had ms 858.
2014 06-27 T 10: 11:28.714 + 05:30 | VMX | I120: TimeTracker host at the conversion rate of comments 4745597640 to 1994989000Hz--> 0 to 1994989000 Hz
2014 06-27 T 10: 11:28.714 + 05:30 | VMX | I120: TimeTracker host to comments ((x * 2147483648) frequency conversion > > 31) +-4745597640
2014 06-27 T 10: 11:28.714 + 05:30 | VMX | I120: timeTracker.globalProgressMaxAllowanceMS: 2000
2014 06-27 T 10: 11:28.714 + 05:30 | VMX | I120: timeTracker.globalProgressToAllowanceNS: 1000
2014 06-27 T 10: 11:28.730 + 05:30 | VMX | I120: USB: initializing 'Virtual Hub' backend
2014 06-27 T 10: 11:28.730 + 05:30 | VMX | I120: USB: initialization backend 'generic '.
2014 06-27 T 10: 11:28.761 + 05:30 | VMX | I120: USBGW: writing arbitrator op: 15 len:4
2014 06-27 T 10: 11:28.761 + 05:30 | VMX | I120: USBGW: writing arbitrator op: 0 len:4
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: USBGW: writing arbitrator op: 27 len:79
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: USBGW: writing arbitrator op: 13 len:19
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: USB: initialization backend "Virtual HID."
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: USB: 'Remote control' backend initialization
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: RemoteUSBVMX: retrieved hostId [44 45 4 c 4 c 56 00 10 50 - 80 34 c6 c0 31 42 53 4f]
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: RemoteUSBVMX: min:15 current version: 16 of the Protocol
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: RemoteUSBVMX: no delay parameter is set to TRUE.
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: USB: 'Virtual Mass Storage' backend initialization
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: USB: "Virtual CCID" backend initialization
2014 06-27 T 10: 11:28.777 + 05:30 | sensorThread | I120: VTHREAD start thread id 8 'sensorThread' host 3920
2014 06-27 T 10: 11:28.792 + 05:30 | VMX | I120: USB CCID: could not establish context: SCARD_E_NO_SERVICE (0x8010001d).
2014 06-27 T 10: 11:28.792 + 05:30 | VMX | I120: USB CCID: could not establish context: SCARD_E_NO_SERVICE (0x8010001d).
2014 06-27 T 10: 11:28.792 + 05:30 | VMX | I120: USB: initialization backend "virtual Bluetooth."
2014 06-27 T 10: 11:28.792 + 05:30 | VMX | I120: USB: "Virtual Audio" backend initialization
2014 06-27 T 10: 11:28.792 + 05:30 | usbCCIDEnumCards | I120: VTHREAD start thread id 9 'usbCCIDEnumCards' host 2876
2014 06-27 T 10: 11:28.792 + 05:30 | usbCCIDEnumCards | I120: USB CCID: map enum thread is created.
2014 06-27 T 10: 11:28.855 + 05:30 | VMX | I120: USBGW: skip the drive bracket to the file (E:\SOASTA\CloudTest Lite) vmwarevm\CloudTest Lite.vmx.
2014 06-27 T 10: 11:28.855 + 05:30 | VMX | I120: USBGW: skip the drive bracket to the file (E:\SOASTA\CloudTest Lite) vmwarevm\Virtual Disk.vmdk.
2014 06-27 T 10: 11:28.855 + 05:30 | VMX | I120: USBGW: jump drive for files (disk Lite. vmwarevm\Virtual E:\SOASTA\CloudTest 2.vmdk) carrier.
2014 06-27 T 10: 11:28.855 + 05:30 | VMX | I120: USBGW: skip the drive bracket to the file (E:\SOASTA\CloudTest Lite) vmwarevm\CloudTest Lite.vmsd.
2014 06-27 T 10: 11:28.855 + 05:30 | VMX | I120: USBGW: skip the drive bracket to the file (E:\SOASTA\CloudTest Lite) vmwarevm\CloudTest Lite.nvram.
2014 06-27 T 10: 11:28.855 + 05:30 | usbCCIDEnumCards | I120: USB CCID: could not establish context: SCARD_E_NO_SERVICE (0x8010001d).
2014 06-27 T 10: 11:28.902 + 05:30 | VMX | I120: MKS PowerOn
2014 06-27 T 10: 11:28.902 + 05:30 | MKS | I120: VTHREAD start thread id 1 "mks" host 2880
2014 06-27 T 10: 11:28.902 + 05:30 | MKS | I120: Thread MKS is alive
2014 06-27 T 10: 11:28.917 + 05:30 | mksInput | I120: Host Id 10 "mksInput" start thread 336 VTHREAD
2014 06-27 T 10: 11:28.917 + 05:30 | the mouse | I120: VTHREAD start host to the 'mouse' 11 3912 thread ID.
2014 06-27 T 10: 11:28.917 + 05:30 | kBh. I120: VTHREAD start host to the 'kbh' 12 1292 thread ID.
2014 06-27 T 10: 11:28.917 + 05:30 | MKS | I120: MKSWin32: recording of the window of upper level (0x2061c) to receive a notification of change of session.
2014 06-27 T 10: 11:28.917 + 05:30 | MKS | I120: Unable to load library D3DX9.
2014 06-27 T 10: 11:28.933 + 05:30 | MKS | I120: MKS-RenderMux: RenderOps collection caps...
2014 06-27 T 10: 11:28.933 + 05:30 | MKS | I120: KHBKL: impossible to analyze KeyString to: "
2014 06-27 T 10: 11:28.933 + 05:30 | MKS | I120: MKS-RemoteMgr: default display name: CloudTest Lite
2014 06-27 T 10: 11:28.933 + 05:30 | MKS | I120: MKS-RemoteMgr: Configuration of VNC to the virtual machine configuration file loading
2014 06-27 T 10: 11:28.933 + 05:30 | MKS | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:28.933 + 05:30 | VMX | I120: VLANCE: send the cluster threshold is 80, size = 2 recalcInterval 2 ticks
2014 06-27 T 10: 11:28.933 + 05:30 | VMX | I120: VMXNET: send the cluster threshold is 80, size = 2 recalcInterval 2 ticks, dontClusterSize is 128
2014 06-27 T 10: 11:28.948 + 05:30 | VMX | I120: NetPkt: checksum cycles/kB: asm1 = 70 C = 821 asm2 = 391
2014 06-27 T 10: 11:28.948 + 05:30 | VMX | I120: NetPkt: copy and cycles/kB summing up: C = 473 asm1 = asm2 934 = 411
2014 06-27 T 10: 11:28.948 + 05:30 | VMX | I120: Chipset version: 0 x 17
2014 06-27 T 10: 11:28.979 + 05:30 | VMX | I120: FILE: FileDeletionRetry: not reproducible error (E:\SOASTA\CloudTest Lite. vmwarevm\CloudTest Lite.vmx ~): the system cannot find the specified file (2)
2014 06-27 T 10: 11:29.042 + 05:30 | VMX | I120: Msg_Post: error
2014 06-27 T 10: 11:29.042 + 05:30 | VMX | I120: [msg.disk.slavenomaster] The IDE (disks/CD-ROM) configuration for the device is incorrect. It is an IDE slave with no master to ide0:1. This configuration does not work in virtual machines. Move the disk/CD ide0: 1 to ide0:0 using the configuration editor.
2014 06-27 T 10: 11:29.042 + 05:30 | VMX | I120: ----------------------------------------
2014 06-27 T 10: 11:29.042 + 05:30 | VMX | I120: MsgIsAnswered: use builtin default 'OK' as the answer to "msg.disk.slavenomaster".
2014 06-27 T 10: 11:29.042 + 05:30 | VMX | I120: Module DevicePowerOn market failed.
2014 06-27 T 10: 11:29.042 + 05:30 | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0
2014 06-27 T 10: 11:29.057 + 05:30 | MKS | I120: MKS PowerOff
2014 06-27 T 10: 11:29.057 + 05:30 | MKS | I120: Fate of thread MKS
2014 06-27 T 10: 11:29.057 + 05:30 | usbCCIDEnumCards | I120: USB CCID: enum output card wire.
2014 06-27 T 10: 11:29.057 + 05:30 | VMX | I120: ide1:0: numIOs = 1 numMergedIOs = 0 numSplitIOs = 0 (0.0%)
2014 06-27 T 10: 11:29.057 + 05:30 | VMX | I120: Closing of disc ide1:0
2014 06-27 T 10: 11:29.369 + 05:30 | VMX | I120: ide0:1: numIOs = 1 numMergedIOs = 0 numSplitIOs = 0 (0.0%)
2014 06-27 T 10: 11:29.369 + 05:30 | VMX | I120: Closing of disc ide0:1
2014 06-27 T 10: 11:29.884 + 05:30 | VMX | I120: AIOWIN32C: asyncOps = 4 listening = 176 bufSize = 0Kb fixedOps = 0 sgOps = 2 = 1 sgOn
2014 06-27 T 10: 11:29.884 + 05:30 | aioCompletion | I120: Thread AIO treated 4 finishes
2014 06-27 T 10: 11:29.899 + 05:30 | VMX | I120: FILE: FileDeletionRetry: not reproducible error (E:\SOASTA\CloudTest Lite. vmwarevm\CloudTest Lite.vmx ~): the system cannot find the specified file (2)
2014 06-27 T 10: 11:29.946 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:1222]: VMAutomationPowerOff: power off the power.
2014 06-27 T 10: 11:29.946 + 05:30 | VMX | I120: Policy_SavePolicyFile: not valid for function arguments.
2014 06-27 T 10: 11:29.946 + 05:30 | VMX | I120: PolicyVMX_Exit: could not write policies: 15.
2014 06-27 T 10: 11:29.946 + 05:30 | VMX | I120: WORKER: asyncOps = 2 maxActiveOps = 2 maxPending = 0 maxCompleted = 1
2014 06-27 T 10: 11:29.946 + 05:30 | WinNotifyThread | I120: WinNotify outgoing wire
2014 06-27 T 10: 11:29.962 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0
2014 06-27 T 10: 11:29.962 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0
2014 06-27 T 10: 11:29.962 + 05:30 | VMX | I120: Past vmx/execState/val of poweredOff
2014 06-27 T 10: 11:29.962 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 0 additionalError = 0
2014 06-27 T 10: 11:29.962 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:4024]: error VIX_E_FAIL in VMAutomation_ReportPowerOpFinished(): unknown error
2014 06-27 T 10: 11:29.993 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0
2014 06-27 T 10: 11:29.993 + 05:30 | VMX | I120: Past vmx/execState/val of poweredOff
2014 06-27 T 10: 11:29.993 + 05:30 | VMX | I120: VmdbPipeStreamsOvlError could not read: (109) the tube was completed.
2014 06-27 T 10: 11:29.993 + 05:30 | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 / "-(32)
2014 06-27 T 10: 11:30.055 + 05:30 | VMX | I120: VMIOP: output
2014 06-27 T 10: 11:30.055 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:861]: VMAutomation_LateShutdown()
2014 06-27 T 10: 11:30.055 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:811]: VMAutomationCloseListenerSocket. Close the socket of the receiver.
2014 06-27 T 10: 11:30.055 + 05:30 | VMX | I120: VMX VMDB Flushing connections
2014 06-27 T 10: 11:30.055 + 05:30 | VMX | I120: Exit VMX (0).
2014 06-27 T 10: 11:30.102 + 05:30 | VMX | I120: AIOMGR-S: o stat = 4 r = 12 w = 0 I = 0 br = 196608 bw = 0
2014 06-27 T 10: 11:30.102 + 05:30 | VMX | I120: OBJLIB-LIB: ObjLib cleaning done.
2014 06-27 T 10: 11:30.102 + 05:30 | VMX | I120: FileTrack_Exit: fact
Hi Vicky_27and welcome to the VMware communities!
Your virtual machine has an advanced configuration option that will remove the error messages, which would make things a bit confusing. Your first priority should be to enable this option, unless you have a very good reason to need to remove the error messages.
Close VMware workstation. Navigate to the folder of the virtual machine (E:\SOASTA\CloudTest Lite.vmwarevm) and search for the configuration of the virtual machine (CloudTest Lite.vmx) file. (You may have to configure Windows Explorer to show file extensions.) Open it in Notepad or your favorite text editor. Find the line that says:
msg.autoAnswer = 'TRUE '.
and remove this line. Save the file and quit Notepad.
Who is will fix the immediate problem, but he should at least allow VMware Player to show you an error message explaining why he wasn't. If you turn on the virtual machine now, you should see the error:
The IDE (disks/CD-ROM) configuration of the device is incorrect. It is an IDE slave with no master to ide0:1. This configuration does not work in virtual machines. Move the disk/CD ide0: 1 to ide0:0 using the configuration editor.
So, to fix the problem, you can use the player to change the settings of the virtual machine. Choose the virtual hard disk to IDE 0:1 (the one with the name of the disk file virtual 2.vmdk), click on the Advanced... button in the bottom right and change the virtual device node of IDE 0:1 to IDE 0:0. Save the configuration and power on the virtual machine.
I hope this helps!
--
Darius
-
Has anyone tried using the cw3dgraph in WPF?
Has anyone tried to use the CW3DGraph with a WPF project? I guess you need a WIndowsFormHost? If yes I do not know how you would connect into it. I control in my project reference but I don't know how I would refer to it on a window.
Hello
The CW3DGraph is an ActiveX control. This article on MSDN provides steps on how to host a custom ActiveX on WPF: MSDN Walkthrough: hosting an ActiveX control in WPF
The procedure step by step uses Windows Media Player for example, but it still serves as a useful reference.
Hope this helps,
-
I have vista and how to record a program to a usb port to another user who has xp to use the program
I have a samsung program for my phone, I installed and I have vista, I want to know how to record the program on a USB for another user may install and use the program, because they have a netbook with no cd it must be saved to the usb, but the other user has xp so please can you me how to record the program on usb
Hello
You cannot save a program that is installed on a USB key or any other
Once installed a program spreads during the operating system at various locations
You must download it again and save it on a USB flash drive, then transfer it to their netbook via a USB flash drive
or get them to download it themselves directly to their netbook so they are available on the net
For more information on the program, contact samsung
-
Computer HP laptop, G7-1365dx has no power on the USB ports
The laptop has no power over but has sense on the usb ports. If I plug a usb powered auto element into a port, it works very well but is not one unpowered. How can I turn on the power to the usb ports?
If your laptop is still in warranty contact HP total care. To solve this problem, the system board must be replaced.
It apears that you have inadvertently pointed the USB ports with something that needed too much current.
-
I recently received from remote assistance installed a new anti-virus program. During using the remote technician, I he observed several open windows because it deleted the files that were left by previous anti-virus programs on my computer. These files prevent the download of the new program. As I watched him navigate through my programs and files, I noticed that there are a lot of game files that have been deleted by using the functions of the control panel and uninstalling still in my computer. The technician of 3-4 programs installed on my computer while he removed residual files of the antivirus and promptly removed from these programs when it was correctly installed my new anti-virus program. I would really like to know how to access files or records what he did and then delete the game files that I thought were removed. I downloaded at least 100 trial offers for sets of objects hidden over the years and you don't want no trace with my memory of the computer. No help available out there?
Hey,.
You can follow this link to recover lost or deleted files:
http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files
also, look for the file/game:
http://Windows.Microsoft.com/en-us/Windows-Vista/save-your-search-results
Hopefully this should help you.
-
In the last 2 days I had a problem as indicated in the title of this post. The fault corrected itself 3 times, but still, it's back to "plugged in, not load.» I use the laptop (Windows Vista Home Premium; 32-bit) on the card without problem, I assume that the card itself is not defective.
I also have a Dell Inspiron 630 M laptop running Windows 7. Can I use this card with the laptop of Vista, without causing damage to the Vista? If it is safe to do so, and begins to charge the battery on Vista, this would indicate that the Vista adapter/charger has a kind of fault.
Hoping someone can give me some advice. Thank you.
Could be - or it could be the power supply. See if the other card gives a link more solid. If so, this is the plug of the adapter. If it isn't, the decision-making within the system.
-
Airport express to extend wi - fi using the adapter but NOT extreme airport
Hello
I am looking to buy an express airport in order to listen to music through my stereo and also create another network wireless upstairs in my house.
My question is, I currently have no apple down wireless router and I have connected to a line adapter with an adapter of the power line on the floor. If I connect the airport express base station to the adapter on the floor, I'll be able to create another network on the floor as well as the flow of my music, even if the router that comes from the connection is not apple router?
Thank you
Andy
If the floor of the Airport Express will be connected via the WAN port using a regular power adapter ethernet cable carrier online and will be in Bridged mode, you can create a wireless network to the floor. Not bridged mode, you can see double-NAT issues, which should be avoided.
Maybe you are looking for
-
When I download a file, there is a very strong sound Horn when it ends. How can I change this noise?
When I download a video or a file, the alert when you have finished its is very strong and unpleasant. How can I change this alert?
-
Can my keychain Mac record passwords used in firefox?
The keychain on my Mac doesn't seem to save the passwords used on Firefox
-
Can satellite L300-1AQ - I use the L300D recovery disk?
My son has a Satellite L300-1AQ equipped of vista. All of a sudden will load is more the laptop and automatic repair options fails too. There is a blue screen that appears, but only for a second when I try the repair option - then the laptop stops. W
-
Windows Media Player Question on Satellite L450D PSLYSE
* + Computer laptop Toshiba Satellite L450D PSLYSE + *. * + I just delected (accidentally) the "media player window icon and the title of this program" which is located on the all PROGRAMS list (somewhere in the start menu). Experts here can show me
-
Windows 7 64 bit on my T510 is dead. When you connect, it hangs on the forever login screen. Windows Recovery failed too. It lasted eight hours and reported an error (something like error to restore a file and the disk is full, although my C drive is