Airport express to extend wi - fi using the adapter but NOT extreme airport

Similar Questions

• R7000: Smartphones connect to WiFi and can navigate using the browsers, but not Internet with applications

  Hi all,

  I just installed my new router WiFi R7000 and I feel some strange problems.

  My WiFi configuration consists of two WiFi networks, one on the 2.4 GHz frequency and the other on the frequency of 5 GHz.

  I have connected my two smartphones successfully to these two networks. The strange thing is that if I use all browsers, I am able to navigate, while if I run the application apps such as Google, Facebook, and LinkedIn, they are unable to get access to the Internet.

  I have the latest firmware installed (V1.0.6.28_1.1.83) and tried a hard reset and reconfiguration.

  This thing happened to someone?

  Thanks in advance

  I found the solution here http://forum.xda-developers.com/showthread.php?t=2177378

  I had to reduce the MTU to 1300 and now all seems fine

• Email sent using gmail pop, while on outlook express 6 is checked in to the gmail server sent the file, but not on my express outlook sent folder.

  Original title: problem with outlook express 6 and gmail

  Email sent using gmail pop, while on outlook express 6 is checked in to the gmail server sent the file, but not on my express outlook sent folder.  How can I have email sent appear in Outlook express 6 sent folder.  I put it as pop not imap

  Any suggestions?

  Check in OE under Tools | Accounts | Mail | Properties and ensure that it is not set to IMAP.  It seems to me that if you use IMAP folders.  If it isn't, in addition to the suggestion of Umesh, you can try to go to file | Identities and install a new identity and add your POP3 account and see if it works very well.

  Steve

• Unable to send attachments in outlook express. HTML is selected and is therefore 'send pictures' recipient receives the text but not images?

  I am unable to send attachments in outlook express. HTML is selected and is therefore 'send pictures' recipient receives the text but not images?

  All security settings seem fine, an idea?

  Some messages do not conform to the standards of the Internet in the sense that they cannot be returned intact by their transmission.  The way around this is to use Message | Until the attachment, then they will be properly transmitted, since they will be attached.

  Steve

• How to use the adapter from the wall with my Mac Pro laptop?

  How to use the adapter from the wall with my Mac Pro laptop?

  The AC wall connector is not compatible with the outlet on the MBP?  As the MBP charger will work from 100v to 240v, a transformer is necessary.  You need a converter that connects to the power outlet home and is compatible with your MBP.  You can buy the Apple travel kit:

  http://www.Apple.com/shop/product/MD837AM/A/Apple-world-travel-adapter-Kit

  Or you can use a single specific converter for the geographical area:

  http://www.Amazon.com/orei-grounded-universal-adapter-Singapore/DP/B004SCSV2U/re f = sr_1_4? ie = UTF8 & qid = 1460735377 & sr = 8-4 & keywords = us + in + uk + power + adapter

  (it is a UK USA example)

  Or you can get the converter that adapts the charger directly:

  http://www.Amazon.com/HIOTECH%C2%AE-extension-charger-connecting-specification/d p/B00MA48JZW/ref = sr_1_3? ie = UTF8 & qid = 1460735486 & sr = 8-3 & keywords = us + in + uk + power + ad aptor + apple + charger + cord

  (again, this is for a UK plug.)

  Ciao.

• Lost my icon to send new messages in mail (appears in the toolbar, but not active). Can not send a new message in the drop-down list box. Any ideas on how to solve this problem? I tried to use the toolbar Customize to drag an icon to the toolbar.

  Lost my icon to send new messages in mail (appears in the toolbar, but not active). Can not send a new message in the mailbox (impossible to select) drop.  I tried to use the toolbar Customize to drag an icon to the toolbar, but it doesn't work anymore. Using Mail 9.2 and OS X 10.11.2.  Any help is appreciated.

  The Send button will not be activated unless the message can be sent. Are you sure that you have entered a recipient and the account is online?

  The connection doctor (window menu) displays errors.

• CANON 70 D HAS NO POWER USING THE ADAPTER SECTOR OR 2 DIFFERENT BATTERIES

  I WAS USING THE CAMERA THE DAY BEFORE, I BOUGHT THIS CAMERA IN DECEMBER 2013. I USED THIS CAMERA VERY SLIGHTLY.

  TODAY, I WENT TO DOWNLOAD VIDEO FROM THE CAMERA TO CHANGE IT, BUT THE CAMERA WOULD NOT TURN USING THE A/C ADAPTER. I KNEW THAT NOTHING WAS WRONG WITH THE ADAPTER, BUT I PUT IN 2 DIFFERENT BATTERIES AFTER CHARING, THEM AND STILL NO POWER.

  I HAVE REPEATED TO TRY THE A/C ADAPTER AND BATTERIES. I TRIED TO TAKE THE CARD, THE LENS AND MAKING SURE THAT THERE NOTHING PREVENTS THE CONTACTS FOR THE A/C OR BATTERY.

  I STARTED SEARCHING ONLINE OF THE KNOWN FOR THE CANON 70 D ISSUES, I DIDN'T KNOW ANY SPECIFIC 70 D BUT I FOUND A FEW ISSUES FOR OTHER CAMERAS OF CANON WITH THE SAME QUESTION.

  SOME WERE TOLD TO TAKE THE CARD AND THE LENS AND REPLACE IT WITH ANOTHER GOAL, THEN PLACE THE CARD BACK, AND THEN ADD THE BATTERIES AND THAT WILL FIX THE PROBLEM. IT DOES NOT WORK. ANOTHER VIDEO THAT I FOUND SAID THAT THERE WAS A SCREW LOOSE ON THE CIRCUIT BOARD PRINTED FOR THIS OLDER CANON CAMERA... HIS SCREWS SEEMED TO BE MORE IMPORTANT THAN THE SCREWS THAT THE 70 D A SO IT WILL BE VERY HARD FOR ME TO FIND A SCREW DRIVER THAT SMALL... I HAVE TO GO BUY A KIT. BUT NOT RADIO IM LOOKING AT THE BOTTOM OF MY CAMERA IF TAKE APART WILL WORK, IT SEEMS THAT MY CAMERA BODY COMES OFF AS NOT EASILY THAN VIDEO.

  SO NOW IM STUCK WITH MANY PROJECTS VIDEO IM IN THE MIDDLE OF... BUT NOW I DON'T HAVE A CAMERA... I CAN'T AFFORD TO DO REPAIR, AND I CAN'T AFFORD TO BUY JUST ANOTHER CAMERA AND I'M NOT SURE IF THIS UNIT IS UNDER WARRANTY FROM CANON. I BOUGHT AT B & H PHOTO AND I STILL HAVE THE RECEIPT OF E-MAIL FROM THE PURCHASE.

  https://www.YouTube.com/watch?v=FYlNyZ1IP3s

  HAS ANYONE ELSE HAD THIS PROBLEM WITHT THE CANON 70 D?

  AFTER VIEWING THE VIDEO SHOWING THE SCREW CAME OUT ON THE MOTHERBOARD OF THE PC, NOW I SHAKE MY CAMERA, I THINK I CAN HEAR SOMETHING MOVING INSIDE... BUT IT COULD BE MY IMAGINATION. I'M NOT 100% SURE, I HEAR SOMETHING LOOSE. IT REALLY SUCKS BECAUSE I CAN'T COMPLETE MY PROJECTS AND I'VE FITTED THE CASE OF MONEY THE NEW LENS CAMERA AND PURCHASE HAS RECENTLY...

  IF YOU CAN NOT SAY THAT IT IS THE BATTERIES BECAUSE IM ALSO USING AN A/C ADAPTER. I KNOW HOW TO TURN ON THE CAMERA! IM GETTING NOTHING. NO POWER,

  I NEED HELP.

  I CORRECTED MY OWN QUESTION.

  WHAT WOULD HAVE COST ME HUNDREDS OF DOLLARS BY SENDING IT TO CANON, I MANAGED TO SOLVE THIS PROBLEM AND PERHAPS OTHERS HAVE HAD THE SAME PROBLEM AND THEY MAY HAVE SPENT MONEY UNNECESSARY. I SPENT ONLY $6 AND A FEW CHANGES... ALLOWS CALL HIM $7 TO SOLVE THIS PROBLEM.

  I DON'T HAVE TO DISASSEMBLE THE APPLIANCE BUT AS HE TRIED TO DO, I SAW SOMETHING THAT I SUSPECTED WAS THE QUESTION. I PLAYED A BIT WITH THIS SWITCH OR SOME TYPE OF CENSORSHIP OR LOCK.

  SOMETHING LIKE THIS WAS SO SIMPLE TO SOLVE, BUT COULD HAVE COST ALLOT ME OF MONEY. THE PART IS TOO DELICATE. NOW THAT I'M AWARE OF THIS, I CAN BE MORE CAREFUL, BECAUSE I WAS ALREADY VERY CAREFUL WITH ALL MY CANON... BUT IT WAS SOMETHING I WOULD HAVE NEVER EXPECTED THAT IS THE PROBLEM, I SAW THAT HOLE SOONER BUT NA NOT KNOWING WHAT IT WAS FOR... WHILE I WAS GETTING READY TO TAKE OFF THE BATTERY COVER, I NOTICED SHE HAD A TYPE OF CONNECTOR THAT WOULD GO IN THE HOLE (SQUARE) SO I SIMPLY PUT A PEN IN THE HOLE AND THERE IS A SWITCH OR SOMETHING, I PUT THE SWITCH IN THE CENTER. I PUT THE BATTERY IN THE CAMERA, AND THEN HE CAME.

  https://www.YouTube.com/watch?v=nBmtTQn3RlE

• I used the snap, but went too far with the mouse that has placed the window out of view on the desktop. How I suddenly back

  I used the snap, but went too far with the mouse that has placed the window out of view on the desktop. How I suddenly back

  Try clicking on the Chrome icon & press f11 to maximize the screen.

  Kind regards

  Nicholas Lee Fagan

• Hello! I have the CD of Acrobat Pro DC version and then to buy the subscription monthly I couldn't code redemption to work for my MS Surface Pro 4... as obviously cannot use the CD but Staples has sold to me, I opened it: Staples said that they c

  Sorry I added it in the question, sorry about that part!

  Hello! I have the CD of Acrobat Pro DC version and then to buy the subscription monthly I couldn't code CD Exchange to work for my MS Surface Pro 4... as obviously cannot use the CD but Staples has sold to me, I opened it: Staples said that they could transfer to my Surface and they canceled the monthly... but no, I'm still paying every month and I have a box of cd $ 500 that I can't use! Help, please!  How can I activate this pay redemption code (which does not work? I tried for hours!) and I pay monthly?  Help, please!

  Hi shannonr44052735,

  I see that you have an active subscription to Acrobat Pro DC under your email address.

  See this KB doc for help: redemption code help

  If your redemption code does not work, I will propose you to return what you already active subscription.

  You can install Acrobat Pro DC from this link: download Pro or Standard versions of Acrobat DC, XI or X

  Make sure that you use the same Adobe ID, in which you have Acrobat subscription.

  Let us know if you need help.

  Kind regards

  Meenakshi

• Brush is using the background color not the FOREGROUND color.

  For some reason any my brush uses the background color not the FOREGROUND color. I went to the window of COLOR but I can't go back. ???

  Try to press B to select the tool brush then right click on its icon and select the reset tool

  

• ADF mobile: how to download a file by using the adapter remains api

  Hello

  I want to download files using the adapter. How would download files like PDFs, images (png, jpg...) etc... Some code would be appreciated.

  Thank you

  Ok

  After days of headaches, there is a way to send files using the adapter and the code above for the side server. Even if it's a big fall in mobile ADF perspective they have no api for this.

  To download a txt file, you can simply copy and paste the text file into a string and have the string supplemented with appropriate limit values and padding values ('\r\n') before and after the string.

  To transfer a binary file, you must convert the file to a base64 string, then put it in the form mentioned above.

  then you can send it as follows:

  restAdapter.send (fileString);

  Don't forget to add the appropriate headers.

  content type

  and

  definitions of values to the limits

• Models of DW: 'this document uses the following files not in this site.

  I recently started using DW templates in CS6. It was a bit frustrating at first, but seems well wouth it. I've created quite a few pages in the folder root of hares and have no problems there. However, I created a new folder to a different section of my site (mysite.com/new_folder/new_page.htm), and then went to save a new page of the model and got the message "this document uses the following files not in this site. Its the same site, just a new folder which is placed at the root.  When I save the page in the new folder there to make a copy of duplicant images, css scripts and place them in the new folder to work? Must be a way to do it and have DW know where to find the original files surely?

  Thank you

  I downloaded a test page... It turns out that the 'message' was just misleading and all the Info page has correct links. Everything is good

• I'm trying to update CS 6Illustrator tool by using the update but I continually get an error saying:

  I'm trying to update CS 6Illustrator tool by using the update but I always get an error saying "updates could not be applied." How can this be?

  Here is my log file:

  Update Adobe Illustrator CS6 (version 16.2.1)

  Failed installation. Error code: U44M1P7

  If you are using a mac: http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manager-update.html

• How to monitor the SQL perticuler using the INDEX or not?

  I'm running on a long-term quary and the output is coming very late. So, I want to know that the quary sql uses the index or not? How do I know that?

  Hello

  You have not provided your db version?
  You can check v $ object_usage in a simple way. Try to check the explanation of your query if you current sql is by using your existing index or not.
  Check with dbms_xplan.display

  Request to go through the links of Ask tom and jonathan lewis
  http://jonathanlewis.WordPress.com/2007/02/15/index-not-used-10G/
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:736825544526

  HTH

  -Pounet N

• How to find a specific voice memo file in the backup from my iPhone to my Mac? I know where to find the backup, but not how to recover specific files. Thank you.

  How to find a specific voice memo file in the backup from my iPhone to my Mac? I know where to find the backup, but not how to recover specific files. Thank you.

  You can't look "inside" a backup. Just use iTunes to sync with your iPhone, then you'll see a separate category for voice memos in the sidebar.