Canon BJC 80 printer prints only with Windows 7
I installed Windows 7 on my laptop and downloaded the new driver for my Canon BJC 80 printer. The computer seems to recognize the printer, but it does not print. I do not understand why my printer is listed as the default printer and appear to be installed correctly, but does not print. My printer works already without problem with XP and Vista. Is there anything I can do to get the printer to work? Or my printer won't work with Windows 7? Thank you.
I have Canon BJC-80, working on Windows 7 Sony Vaio laptop: USB-parallel interface did not work. Bought and installed StarTech 1 Port PCI Express (x 1) basic parallel ExpressCard ($70 +) that supports two-way equipment. Removed the previous installation of BJC - 80 and reinstalled the printer on LPT3 (was on LPT1). Worked perfectly. Hope you have an ExpressCard interface to use; If this isn't the case, maybe there are other bidirectional port LPTx more robust handling solutions. Found this solution of amateur astronomers who were trying to get the old CCD cameras to work via the printer port. They found the USB interface / incomplete and required parallel bidirectional handling. Nice to have this small printer with me on travel now. I hope this helps.
Tags: Windows
Similar Questions
-
Canon BJC-50 printer and scanner work with Windows 7?
I have a printer Canon BJC-50 with the cartridge scanner. I ordered a USB to parallel cable adapter must be able to connect to my laptop, because I do not have a parallel port. The Windows 7 compatibility page says that this printer is compatible with Windows 7. Canon said that it is not.
Has anyone successfully connected and used a Canon BJC-50 with Windows 7? If so, were there any problems?
HI - same issue with Canon BJC-80. Says Windows is compatible and Cannon did not write! My BJC-80 prints OK with a USB/parallel cable and install via Windows 7 OK - but printer response time is in minutes to hit a comand "Print" in any program, for example. MS Word 2010?
Suppose that we are victims of the creep of technology and need to buy a new printer - shame I have heaps of cartridges left!
-
Should what download I do Canon iP3600 printer compatible with Windows 7?
Can anyone advise what DOWNLOAD I need my printer compatible with Windows 7?
The Windows 7 Compatibility Center reports a compatibility with printer Photo Inkjet Canon PIXMA iP3600 in 32 - bit and 64-bit Windows 7. (report full here).
You can get the current drivers and software support from Support of Canon PIXMA iP3600 hereon site. Make sure that you choose the correct version of Windows 7 you are using (for example 32-bit vs. 64-bit).
-
I have a laptop running Windows 7 (64-bit machine) I want to print from. The laptop is on a home network wireless. The office is wireless as well and is running Windows XP. The Office has a Canon Pixma iP4000 printer connected with a parallel cable. I installed the latest XP drivers for the printer on the desktop. The laptop can connect directly to the printer with a USB cable and drivers will download automatically and it will print correctly. However, I can't connect the printer using the wireless system. I can go on the laptop to the home network and navigate to the printer and try to install. It makes an automatic search and says that it cannot find the correct drivers. I can browse to the file to install on my desktop, but it of an .exe file and not. INF. I run the .exe file and it installs too, but Setup of printer on the laptop won't let me not by the .inf screen add to complete the installation of a wireless printer.
Any suggestions?
Very probably the XP driver name is different from the name of 64-bit driver. Create a Local Port which copies the data to the print size in Windows 7.
Here is an article knowledge base how to the names of the incompatible drivers. Replace the Windows 7 machine for NT4 machine referenced in the article.
http://support.Microsoft.com/kb/282842
If you load the printer driver 32-bit on your 64-bit computer, you need the 32-bit driver for Windows 7. You can do if you have a 32-bit computer of Windows 7 on the network to push pilots up to the machine that is sharing the printer. None are flat files on the Windows 7 DVD, you need to install the OS or mount the ISO.
The key to successful sharing between computers that run different printing architecture processors is pilot name. PCL6 equal NOT PCL 6.
Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1
-
I am looking for a switch 2 x 1 printer compatible with windows 7
I am looking for a switch 2 x 1 printer compatible with windows 7 or drivers for Belkin F1U201 I
You could try to install Vista (32 bit only) driver in compatibility mode and see if it will work:
http://en-us-support.Belkin.com/app/answers/detail/A_ID/2569/~/f1u201---2x1-USB-peripheral-switch---driverDepending on your current configuration, it may be easier in the long run to buy a wireless printer and share (if your PC supports wireless). Or buy a router that supports USB devices such as this one:
http://www.Amazon.com/GP/product/B00387G6R8/ref=s9_simh_gw_p147_d0_i1?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=Center-2&pf_rd_r=0RE9YC0G15RM1KP1S3FZ&pf_rd_t=101&pf_rd_p=1389517282&pf_rd_i=507846In this way, you can use wifi and UTP to connect computers and printers.
SC Tom
-
I would like to determine the levels of ink a printer 6122 with windows 7.
I would like to determine the levels of ink a printer 6122 with windows 7. Attempt to use the abortd installation CD with the message "bad BONES". I installed the driver 990c work around according to the instructions from HP. It is another way to get the utility package that came on the 6122 install CD?
Printing and scanning Dr. may not be able to detect if ink cartridges are not HP, HP inks no ink installed? You can try cleaning the contacts on the cartridges and power in cycling of the printer.
To clean the contacts, you can reference this document from HP: print cartridge error.
-
How can I check the ink levels in a printer-c410a with windows 8?
How can I check the ink levels in a printer-c410a with windows 8?
Hi Doug007,
I see that your wanting to check ink levels. I'd take a glance on the document below it shows alternate ways to check ink levels.
I hope this helps.
-
Sierra artist works only with Windows 7
original title: Sierra artist
I have an older version of Sierra Print Atist. I really want to use it again. is it possible to make it compatible with windows 7?
MikeHi Michael,
I understand that you need to use Sierra Print artist on your Windows 7 computer.
1. what version of Sierra Print artist do you use?
2. do you get an error message when you try to install Sierra Print artist?
You can check the link mentioned to check the compatibility of Sierra Print artist with Windows 7 below.
If you are able to run this program in previous versions of Windows, I suggest to install the program in compatibility mode and check if that helps.
You can follow the link given below to install the driver in compatibility mode.
What is program compatibility?
http://Windows.Microsoft.com/en-in/Windows7/what-is-program-compatibility
Make the programs more compatible with this version of Windows
http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows
Hope it solves the problem.
If the problem persists, I suggest to contact Sierra print artist support and check if it helps.
http://sierrahelp.com/patches-updates/patches-updates-games/PrintArtistUpdates.h tml
If you have problems of Windows in the future, let us know and we would be happy to help you.
-
RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?
RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.
-
My Canon DR 3060C is not compatible with Windows 7
Canon did not update the DR-3060 64-bit driver. Does anyone have a solution for this?
He has had some success using the DR - 2050 c 64 bit drivers. Please see the local thread for more details.
My Scanner for Canon DR - 2080C is not compatible with Windows 7
Just because Canon is not willing to update their library of drivers together does not mean that drivers designed for material with the internal equivalents "engines" will not work. Find the closest match, you can to your scanner that provides 64-bit Windows 7 drivers and give them a try. While some tests may be needed, you can always uninstall everything that does not work.
If you reach a satisfactory success please post here with your experience so that others in similar circumstances can benefit.
-
Adobe Photoshop version: 13.0.1 (13.0.1.3 20131024.r.34, 2013/10 / 24:21:00:00) x 64
Operating system: Windows NT version: 6.2 Architettura di sistema: Famiglia CPU AMD:15, Modello:10, Stepping: 0 con MMX, SSE Intero, SSE FP, SSE2, SSE3
Fisico processore Conteggio: 6 Velocità processore: 3214 MHz
PROBLEMA: PHOTOMERGE NOT RUN! AND GET THIS ERROR MESSAGE: ERROR 22 WINDOWS NOT HAS DI A COSTRUTTORE LINEA 388 VAR W = WINDOW (RES) NEW
PLEASE, IF POSSIBLE, HELP ME. THIS PROBLEM IS ONLY WITH WINDOWS 10!
Hi biagiob,
Seems that the operating system is obsolete.
Photoshop CS6 has not been tested on Windows NT in accordance with this article: Photoshop system requirements
Suggest you to see this link to the similar problem: Photoshop: Err: "window 22 has no constructor" (Win 7/64 bit)
Kind regards
Claes
-
Canon pixma ip4000 printer works only with Windows 8.1
Separated from this thread.
Hai, I have a Canon pixma ip4000 printer, it works fine with my desktop running windows 7, but it didn't with my laptop running windows 8.1
I can't find any driver support to the Canon Web site.
Is there any solution for this?
Looking forward to hearing from you soon.
Thank you
Hello Chit,
Thanks for posting your query on the Microsoft Community.
I suggest trying to download the latest Windows 7 drivers from Canon Web site and then try to install in compatibility mode.
Step 1: Download the drivers from the Canon Web site.
Step 2: Installing the driver in compatibility mode.
http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
You can also provide the following link to check the compatibility of the printer.
http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home
Follow the Microsoft articles as reference and check if that helps.
http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer
h ttp://windows.microsoft.com/en-US/windows-8/find-and-install-printer-drivers.
It will be useful.
-
HP cp1700 printer works only with Windows 8
My HP cp1700 printer no longer works with Windows 8, but worked well with Windows 7. It is visible in printers and faxes, but displays always 'offline '. This utility is not correct the problem and I could not find any solution working on the forum. HP support reminds me of Windows drivers, which are installed. I uninstalled and reinstalled the printer with hard boots but I have always the same question. Any ideas?
Problem solved with the driver HP CP1700 for Windows 8
1 module printer via a usb cable to your pc
2 turn on your printer and let windows to install the printer
3. go to control panel of configuration, devices and printers, and locate the hp cp1700
4. right click, properties, hardware, again, then click on to the left of the change settings tab
5. on the driver tab, click roll-back of driver which previous version of 2012 at the 2006 pilot
6 follow steps 3 and click on put updated driver and click search automatically and the winows 8 will find for the driver you on the internet and you will have all the features that have been installed for your printer in the end.
Hope you enjoy this :)))
-
Printer works only with Windows 10
Having improved my laptop to Windows 7 to 10 my HP Deskjet F4180 now does not work. I updated the software from the HP Web site although the scanner still works.
Chris,
Your printer appears as supported for Windows 10 using the full feature software.
Your printer:
Range of all-in-one printers, HP Deskjet F4180
Your complete software features:
DJ_AIO_NonNet_Full_Win_WW_140_404 - 4.exe
You may need to do the following:
- Download the full features software
- Remove your computer's existing printing software
- Reboot / restart and log in
- Install the full features software
- Reboot / restart and log in
Instructions, help and examples:
Install the full features software - printer
- The Windows 10 printer Frenzy section
When you see a post that will help you,
Who inspires you, gives a cool idea,
Or you learn something new.
Click the 'Thumbs Up' on this post.
My answer-click accept as Solution to help others find answers.
-
The canon BJC 250 is not printing. I have tsried trouble shooting but failed to print. Help, please
Hello
· try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer
You can also track information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
and read this microsoft tutorial too
Introduction
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Maybe you are looking for
-
I was wondering if I could transfer all applications and content in them on my iPod Touch 4th gen on an iPod Touch 6th gen. If it is possible how I would go to this topic?
-
Why can I not use 'Open the message in a conversation' more?
We are 4 users and both of them have version 24.3.0, and two are on 24.4.0.We use the option "open message in the conversation" a lot and all of a sudden this option is no longer available. Is there a setting that could have been changed to make it h
-
Windows Explorer closes and restarts (?) when I right click on a file photo.
One time, I installed a software to go with a slide scanner. The software changed to the default program for photo files and then proceeds to seize up after that about 12 slides have been scanned. I removed the software, but every time I do a right-c
-
Is windows live messenger 2011 going to be down for a long time? and if so, what other version I can download in the meantime it's course down loading? Can you send me the link to this windows live messenger download. Could you tell me what the probl
-
Unable to connect to the server vCenter because the user name or password not valid
HelloI have a VMware View version 5.1.0 installation (704644) and when I try to add additional virtual machines to an existing pool I get the message (cannot connect to the server vCenter because the username or password are invalid).I have checked a