I have a Canon BJC-250 printer which is not printing. I checked the ink (OK) supply. I even tried to test print and it did not work.

Similar Questions

• old canon BJC 250 printer to laptop

  I have a Canon bjc250 printer and cannot print onmy notebook. I have a cable that connects and converts parallel USB cable but cannot find a driver to run the printer.

  http://www.USA.Canon.com/OPD/controller?Act=OPDDownloadIndexAct

  Search for drivers for the Canon link above.

  Canon has written drivers for its products, not Microsoft.

  If Canon doesn't have a Vista Compatible driver for this printer model, it is time to update the printers.

  See you soon.

  Mick Murphy - Microsoft partner

• Canon BJC-50 printer and scanner work with Windows 7?

  I have a printer Canon BJC-50 with the cartridge scanner.  I ordered a USB to parallel cable adapter must be able to connect to my laptop, because I do not have a parallel port.  The Windows 7 compatibility page says that this printer is compatible with Windows 7.  Canon said that it is not.

  Has anyone successfully connected and used a Canon BJC-50 with Windows 7?  If so, were there any problems?

  HI - same issue with Canon BJC-80. Says Windows is compatible and Cannon did not write! My BJC-80 prints OK with a USB/parallel cable and install via Windows 7 OK - but printer response time is in minutes to hit a comand "Print" in any program, for example. MS Word 2010?

  Suppose that we are victims of the creep of technology and need to buy a new printer - shame I have heaps of cartridges left!

• I can not connect windows 7 to an old Canon BJC 250 (have USB to parallel cable. conv)

  I have a Canon BJC 250 printer connected to the USB port ieee. Its a printer Workhouse. Never had a paper jam all these years. (1996), I found ink cart. to do this in a thrief store. I can't seem to part with them. His semple to operate and works better than my Dell 725 and the Epson conbo. I would like to know if there is conpatable with Windows 7. I can't install the driver of this OS. If anything can work with other pilots from cannon. Notes; I still have the installation CD. but it will not be installed.

  If you go to the website of Canon in the following link, it shows as the latest drivers for XP.  In addition, if you click on "Service and support" at this link and then search for "Windows 7", you will find a document that lists the BJC series printers that are supported for Windows 7 and the 250 is not on this list. "  Here is the link to Canon: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/bjc_series/bjc_250_series#ServiceAndSupport
  I thought that maybe the BJC-240 which is support could be close enough, but based on what follows, where the user asking the question said he tried this driver, apparently we don't: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/canon-bubble-jet-bjc-250-printer/d27af8d2-a770-e011-8dfc-68b599b31bf5

• Canon Pixma iP1500 printer and it connect not gives an error code 20

  I have a canon Pixma iP1500 printer and it does not connect gives an error code 20?

  Hello

  1. If it works much earlier?

  2. did you make any changes before this problem?

  3. What is the exact message you received?

  I suggest to go through these steps and check.

  Method 1:

  This is due to the UAC. Disable UAC will help because UAC prompts the user the permission to continue, the time required to get the question and answer that cause the printer to turn it off.

  If you do not want to activate UAC you can call EnablePrinter when the capture of the EnablePre() event generated by the driver.

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:

  Uninstall the printer driver, download the latest driver on the manufacturer's website, install on your computer and check.

  Step 1: you can download the latest driver from the link below http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1500#DriversAndSoftware

  Step 2: Uninstall the device from Device Manager driver.

  a. right-click on the icon my computer

  b. Select manage from the menu.

  c. Select Device Manager in system tools that are listed in the resulting display.

  d. right-click on the device.

  e. click on the driver tab.

  f. click on uninstall.

  g. restart the computer

  Step 3: Installed the downloaded printer driver and check out them.

• canon mp 250 printer

  Hello

  I have a problem of recognition between my pc and the canon mp 250 printer

  Thanks for your help

  French

  Please click on the icon of language at the bottom of this page to select your language from the list of countries / regions to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the language there, the support options for additional international sites are at the link below:

  http://support.Microsoft.com/common/international.aspx

  Please click the language icon at the bottom of this page to select your language from the list of countries / regions pour post your question in the language of your choice. The forum you posted is fr English only. If you can't find the language here, additional support options to international destinations can be found by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you.

• Canon BJC 5000 printer driver

  I have a Canon BJC 5000 which stopped printing. I tried to reinstall, but get the error message driver will not load.
  How can I get printrer work - where can I get a driver suitable for the installation. The CD supplied with the printer will not provide the correct driver.
  Thank you

  http://www.USA.Canon.com/OPD/controller?Act=OPDDownloadIndexAct

  Link above is for Canon Drivers/Downloads.

  See you soon. Mick Murphy - Microsoft partner

• Canon BJC 80 printer prints only with Windows 7

  I installed Windows 7 on my laptop and downloaded the new driver for my Canon BJC 80 printer.  The computer seems to recognize the printer, but it does not print.  I do not understand why my printer is listed as the default printer and appear to be installed correctly, but does not print.  My printer works already without problem with XP and Vista.  Is there anything I can do to get the printer to work?  Or my printer won't work with Windows 7?  Thank you.

  I have Canon BJC-80, working on Windows 7 Sony Vaio laptop: USB-parallel interface did not work. Bought and installed StarTech 1 Port PCI Express (x 1) basic parallel ExpressCard ($70 +) that supports two-way equipment. Removed the previous installation of BJC - 80 and reinstalled the printer on LPT3 (was on LPT1). Worked perfectly. Hope you have an ExpressCard interface to use; If this isn't the case, maybe there are other bidirectional port LPTx more robust handling solutions. Found this solution of amateur astronomers who were trying to get the old CCD cameras to work via the printer port. They found the USB interface / incomplete and required parallel bidirectional handling. Nice to have this small printer with me on travel now. I hope this helps.

• I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer.

  I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer. What could be the problem and how can I fix it?

  Hi Dee,

  Please contact Technical Support for assistance with your printer HP: http://www8.hp.com/us/en/support-drivers.html.

  Good luck!

  Kosh

• I have an Acer aspire 473 v5 which is not turn on or charge there is no light showing

  I need help, I have an Acer aspire 473 v5 which is not turn on or charge there is no light showing.

  I was playing League of legends about this yesterday while he was in charge, then the screen flashed and he died now, it won't work please someone help me I don't know what happened

  don't worry I took my laptop to a local difficulty
  It should be fixed soon

• I currently have an ad - one that I use frequently on IE8 which does not work on IE9. How can I stop to get a message that I have new updates when IE9 is the only update?

  I currently have an ad - one that I use frequently on IE8 which does not work on IE9.  How can I stop to get a message that I have new updates when IE9 is the only update?

  Hi altak38,
   
  -What is the add-on which you speak?
  -Are you referring to Windows Update with Internet Explorer 9 update several times even if it has been installed?
   
  If so, follow the steps in the following article to resolve this problem.
   
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
   
  Post back with more information for the issuance of the add-on - to help you help.

• I have a 2011 version of Dreamweaver which accepts not som, e attributes of html5, what can do?

  I have a 2011 version of Dreamweaver which accepts not som, e attributes of html5, what can do?

  Moved to the main support of Dreamweaver forum.

  Your 2011 Dreamweaver version cannot be updated, in the same way that Ford (or any other car manufacturer) is not provide you with a free car when a new model is available. Therefore, you have several options:

  • Subscribe to the creative cloud to get the latest version of Dreamweaver.
  • Use the media, free HTML/CSS Editor from Adobe.
  • Type the HTML5 attributes manually in Code from Dreamweaver mode and ignore the error messages you get.

• Mini HP which has not worked for a year at least.

  We have a mini HP which has not worked for a year at least. I try to get back to work and am getting a screen that says: enter the administrator password or start on password. Then the disabled system 83656543. can you please help?

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS ( f10 ) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.

  Post back with the details of any error message.

  Note:  If the option to run these tests is not available in the Bios Menu, use the menu diagnosis f2 .

  Kind regards

  DP - K

• Having the right password Adobe which does not work on cc can find no password to work CC. need to replace slice on the second computer

  Recent new laptop. CC not updated I have even on office and was on the previous laptop and can only be loaded on both devices.

  I work Adobe password which will not work on cc cannot find or find a dedicated password CC. In a traffic jam.

  If you're talking about being asked a password during installation or update, this is the password for your COMPUTER, from your operating system verifies that you are authorized to make changes

• Since I have downloaded 8.0.1 pinch zoom does not work anymore. How to solve this?

  Since I have downloaded 8.0.1 pinch zoom does not work anymore. How to solve this?

  You can restore the zoom feature by changing the related values of downtown on the topic: config page.

  • Browser.Gesture.Pinch.in -> cmd_fullZoomReduce
  • Browser.Gesture.Pinch.in.Shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.out-> cmd_fullZoomEnlarge
  • Browser.Gesture.Pinch.out.Shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.Latched-> false

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences can be reset to the default value using the context menu if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)