Canon MG3550: IPad for my CanonMG3550 connection problems

Similar Questions

• Connection (on iPad) for the Adobe viewer problem

  I can not connect with my Adobe ID when I try to connect to Adobe Content Viewer on my iPad. However, I am able to connect to adobe.com or acrobat.com with my Adobe ID with no problems at all. I get the error message: authentication failure.

  Go to http://digitalpublishing.acrobat.com/, sign in and accept the terms of use. Then it will work in Adobe Content Viewer.

  Neil

• I have weak wifi, I can connect my ipad for an ethernet connection?

  We are school uniform shop looking to use a cloud based on point of sale, but wifi is low in our workshop. We have wired ethernet cables. Can I connect my ipad to the Ether somehow?  Is there a converter cable? Or something that could do this work?

  IT department budget is so low, so we are not able to install point additional wifi in the shop.

  Thank you

  # They are only wireless. You should know about the extension of your Wi - Fi existing for your workshop.

• iPad to Virtualbench wireless connectivity problems

  I just got my Virtualbench today and tried to connect it to my iPad after installing the WiFi antenna, and configure it to work on my home network. The iPad app 'sees' the VB on the network but, when the device is selected, fails to connect (it remains in a State of "connection" indefinitely, I left this past for about fifteen minutes without successful connection).

  The firmware is up to date and my laptop connects to it via the USB port very well. It also connects to my wireless laptop.

  My iPad is iPad Mini 3. Someone has seen this issue, has something to do with the iPad app?

  squelch wrote:

  I just got my Virtualbench today and tried to connect it to my iPad after installing the WiFi antenna, and configure it to work on my home network. The iPad app 'sees' the VB on the network but, when the device is selected, fails to connect (it remains in a State of "connection" indefinitely, I left this past for about fifteen minutes without successful connection).

  The firmware is up to date and my laptop connects to it via the USB port very well. It also connects to my wireless laptop.

  My iPad is iPad Mini 3. Someone has seen this issue, has something to do with the iPad app?

  I saw a few times, and my best guess is that the iPad WiFi service gets stuck requesting an IP address from the router to the network.

  Looks like you are using infrastructure mode (where your VirtualBench is connected to your existing wireless network, and the wireless led on the device is blue). is that correct? What happens if change you the mode and use VirtualBench as a point of access (with a light orange, WiFi)? What version of iOS is only your Tablet?

  Here are some other things to try:

  • Reboot your iPad.
  
  
  • Reset network - step 6 on https://support.apple.com/en-us/HT204051

• Oracle load testing for Web Applications - connection problem

  Hello
  
  I am currently trying to learn that load tests of Oracle for Applications Web tool Version: 8.50.0299 and he asks me a user name and password to connect...
  
  and I only set a master password during installation
  try recording with user name: System, sys
  password: master password
  
  It did not work :(
  
  
  any ideas?

  You want the user 'administrator' (with the password you set during installation).

• MacBook Air for Docking Station connection problem

  I am trying to connect a MacBook Air to another monitor via a Kensington docking station, but they do not communicate. The additional monitor is sent immediately to sleep. If I connect Air to the monitor directly everything works fine, but I want to simplify my life with the docking station. Anyone have any ideas?

  Well, I understood the question. It seems that the original DisplayLink software I was using was not correct. After connecting with Kensington, they gave me info on a new beta driver and it works fine.

• G-72 laptop HP: network connection problems

  Hello: I have no internet connection. Here's what I know: unidentified network no internet access. Wireless LAN, Microsoft Virtual WiFi Miniport Adapter. In addition, all security settings are OFF. This has just begun. I have no explanation. Any help is appreciated. Thank you... M.

  Hi there @MesaRey,

  I understand that your computer is no longer connected to the internet. I'm happy to help you with this. Please report the number of complete product for your laptop. Check out the following, if you need assistance with this information. How can I find my model number or product number?

  If other devices are connected and the only one having trouble is your laptop, then you can try a system restore, just in case there is a change to your system. Select a restore point before the problem started and test the connection.

  Using Microsoft System Restore (Windows 7)

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting your wireless network and Internet access (Windows 7)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget a network (Windows Vista)
  1. start network and sharing Center.
  2. in the pane tasks, click on manage wireless networks.
  3. right click on the connection that you want to delete and then click on remove network.
  4. in wireless networks handle - warning dialog box, click OK.
  5. the connection is removed from the list of wireless connections that you can view or edit.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.

  Forget the network: (Windows 8)
  1. press Windows Key + C
  2. click on settings.
  3. click on change PC settings.
  4. click on network on the left.
  5. click on manage known networks.
  6. click on the name of the network.
  7. click on forget.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

• Pavillion G6 2014tx: wireless connectivity problems

  Since the last 2-3 months, my wireless connection does not work correctly. This happened right after that I did the partitioning in the D drive (I don't think this is the main cause). What is happening is that, all of a sudden when internet does not bar shows signs of yellow warning and 'tells' LIMITED ACCESS wireless network. When I try to solve problems, it will give no problem. Then in Device Manager, I tried to uninstall and install again, the internet worked for a while, and still the same problem occurs. When I tried to call to the service center, they told me that I have to buy CDs to retrieve a value of rs500 because I did not these recovery disks. I'm in serious trouble please help...

  I also tried to update latest driver frm net, even if the problem does not get resolved. I also tried to reset the TCPIP in cmd prompt, but it worked for 2-3 days and still the same problem happened...

  Hi there @Parthsagar2010

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with your wireless connection, and I am happy to help you with this.

  I realize that you mentioned the update of your driver from the internet, but just in case, here is the page drivers. There are several pilots possible depending on what card you have.

  HP Pavilion g6-2014tx Notebook PC - software & drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting your wireless network and Internet access (Windows 7)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

• internet connection problem iPad mini

  mini iPad shows the connection wireless router and modem seems to be connected to the cable service provider and works correctly, but the ipad can't connect to the Internet.

  Hi dridley,
  I understand that you have problems with getting your iPad mini connected to the internet. If you have not already done so, please check to see if there are updates available for your device. You can do wireless or with iTunes.

  Update the software on your iPhone, iPad or iPod touch iOS

  If after update, you are still unable to connect to your wifi at home, try to go through the steps in this link. If your iPhone, iPad or iPod touch connects to a Wi-Fi network

  This should have your iPad mini to connect to your wifi as it should. Please use the Apple Support communities to post your question. Good day.

• My IPad 2 Air is mad, he gets on its own, and it freezes. Not to mention it locks me. Didn't this iPad for 2 days. Have not been able to use it! I tried connecting to ITunes and will not work!

  My IPad 2 Air is mad, he gets on its own, and it freezes. Not to mention it locks me. Didn't this iPad for 2 days. Have not been able to use it! I tried connecting to ITunes and will not work!

  Hi Kareyfabela,

  For this kind of problem, I strongly recommended opening a pension with Apple iPad case will probably require inspection by an Apple engineer. You can open a file on this site: https://www.apple.com/support/contact/

  I hope this helps!

  Jonty

• WiFi for computer laptop HP ENVY 15 and Ethernet connection problem

  Hi, a few months ago, I brought a HP ENVY 15 Notebook PC running windows 8.1. It is connected to my wifi with Ralink RT3290 802.11bgn Wi - Fi adapter. My modem is a Technicolour TG582n 2 Wireless ADSL + with wireless 802.11 b/g/n compatible.

  As soon as I got there I noticed a problem of internet where I would be able to connect to my home WiFi network and get full reception bars but would have a hard time to access Web sites on web browsers such as chrome, mozilla and internet explore pages takes some time to load and eventually reached a page "this webpage is not available" (for chrome). This problem seems to occur only with my home network as it can connect to public wifi and my wifi friends and yet I have many other devices such as laptops and other smartphones connected to my wifi that did not at all have poblems with internet and it just seems to be mine. When I connect via ethernet I get good connection for about 10 minutes and then I was completely cut off. However, I can upload a file via the wifi ok if I can get it to start and I can play a game online well enough but often disconnected after an hour or two.

  I checked for new updates of pilot, but they seem to be up to date and im do not manually downloading and installing one on the hp site but I tried (I did probably wrong). I ran the diagnostic function, but it cannot detect all problems. I looked around the internet as well, but still havn't found a solution.

  Also I got the laptop sent back and received a new but the same problem persisted and as I walked through the process of the person I was talking to a admitted that I had a problem like they remote limited from my laptop for a little for the access problem.

  Please help, I've had this problem for a month or two now and is really becoming a problem since I use my laptop computer for purposes of requiring home internet work.

  Thanks in advance and I hope you guys can help!

  Hi @Eugene5 ,

  Welcome to the HP Forums!

  It's a great place to find answers and information.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have a problem with your connection Wireless at home. You are able to connect with full bars but are unable to access the web.   When you're lucky hours just access the Web, you can make a download if you get started in time or play games online for one or two before again declining. You ran the diagnostic function, but no problems were. You had the phone replaced for the same issue, but the replacement has the same question.

  You know your network is an 802.11 G or 802.11n.   How do I know if my WiFi connects using 802.11n (as superuser)

  Please check this setting.

  1. Open the Device Manager
  2. Click the network adapters to expand the list
  3. Right click on the Ethernet connection, and choose Properties
  4. Click the power management tab
  5. "" Please check that ' allow the computer to turn off this device to save power "is not checked.
  6. Repeat this process for all types of listed under network adapters.

  .

  What does your wireless card is supported?

  Here's a link for How to fix little or no Wi-Fi connectivity issues in Windows 8(of fixedbyvonnie) to help you.

  If you need further assistance. Please provide your exact model of HP laptop and your operating system.

  How can I find my model number or product number?

  Good luck!

• Outlook Express 6: your server has unexpectedly ended the connection. The potential causes for this include server problems, network problems, or a long period of inactivity. Error number: 0x800ccc0f

  Original title: Windows XP and Outlook Express 6

  I have a new computer with outlook express and went through the set up instructions.  When I tried to send a test email, I got this error message:

  "Your server has terminated suddenly the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', server: 'pop.mail.yahoo.com', Protocol: POP3, Port: 110, secure (SSL): Yes, error number: 0x800CCC0F. »

  How can I fix this error message and have e-mail sent via Outlook?

  Hi Jeanette Logan,
   
  Here is an article that addresses this issue. Follow the steps listed in the article for this problem:
   
  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

• Try to change my key for XP pro, receive the message error "Impossible to update can be due to connectivity problem'

  I have a valid key for xp pro. Using the key update tool gave me a message "Impossible to update can be due to connectivity problem"(?). Now I'm going in circles trying to find a "regional activation phone number" for Orange County, Ca.After 2 hours of trying, the closest I can get is worldwide volume licensing of phone numbers.

  Hi rexstricklin,

  In addition to the post of Carey, please see the following articles on how to change your activation key:

  http://support.Microsoft.com/kb/810892

  and how to enable XP:

  http://support.Microsoft.com/kb/307890

  I hope this helps!

• Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  You must make a few changes, not only on outgoing parameters, your incoming parameters also need changes.

  Open your e-mail program > tools > accounts > your bizmail account > properties > servers, under outgoing mail server, check "this server requires authentication" > apply > advanced, under outgoing (SMTP) mail change to 465 not 25. Put a check mark on "this server requires a secure connection (SSL)" > under incoming (POP3) mail, change it to 995 no 110. Put a check mark on "this server requires a secure connection (SSL)" > OK

  t-4-2

• I have a HP Pavilion Elite m9280f PC, I replaced the case for a larger, having connection problems

  I have a HP Pavilion Elite m9280f PC, S # [personal information deleted], Windows Vista 64-Bit. I replaced the case for a larger, having connection problems. Lost manual, downloaded manuals, I can not find a diagram of the wires hanging in the motherboard. Help please Tom

  Tomahawk, welcome to the forum.

  This is the page for Specifications of the motherboard of the computer.  You should be able to enlarge the diagram of the motherboard to locate most of the connections.  The only place you may have a problem is with the power button connector.  Some cases are not compatible with HP moterboards.

  Please let us know if this solved your problem or not.