Canon MG5220 printer drivers does not not with Windows 8

Similar Questions

• can someone help me with the link to download hp2050 print drivers that are compatible with windows 8.

  can someone help me with the link to download hp2050 print drivers that are compatible with windows 8, my software CD is not compatible with windows 8, and I can't use the printer now.

  Hello

  The installation program "Full Feature" can be found on the following link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109407-2&cc=us&DLC=en&LC=en&OS=4132&product=4027469&sw_lang=

  Kind regards

  DP - K

• Canon mp530 printer/scanner does not work since the latest version of windows update

  from the windows of the last update my printer scanner does not work. He says I have no installed printer. even if its there in my device list. Ive spoke at length with Canon support and they are sure it's a matter of windows.

  any ideas?

  Hello

  After windows update did you check in Device Manager is there any yellow mark on any driver?

  Go to the device by right clicking on computer Manager and manage

  Right click on the yellow camera brand > properties > details > click on description of the device > select hardware ID

  Let windows to be opened and take note of the VEN ID and DEV ID

  Go to the browser and go to Pcidatabase and put the VEN ID and see who exactly the driver required

  Look for the driver at Google or bing or other for a good

• Canon mp145 printer pxima does not not on 64-bit Windows 7

  I use Windows 7 64-bit basic.and House that my canon PIXMA MP145 printer does not... When I connect it via USB it shows usb not recognized? Please give me some solutions to this problem
  I install the software and drivers for canon printer... and also I tried online solutions like update driver, re-install drivers etc...
  See the Device Manager;

  Unknown device

  Device type: Bus USB controllers

  Manufacturer: (host controller USB Standard)

  Location: Port_ #0001.Hub_ #0001

  Device status

  Windows has stopped this device because it has reported problems

  (code 43)

  Go to http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp140#DriversAndSoftware and download the driver and install it.  They have the driver who interested to operate it.

  I hope this helps.  Good luck.

• Magic mouse 2 scrolling does not with windows 10

  I installed windows via boot camp 10. Now when I start with windows, I can move the magic mouse 2 on the screen but the scrolling with the mouse works do not. When I start with Osx 10.11.4 mouse Magic 2 doesn't have a problem.

  have you installed the bootcamp drivers that you create within the bootcamp utility in OS X?

• Want Dv6 - 7300st: finger print works does not for Windows 10

  Hello

  I've updated 10 64-BIT windows. then after I find, validity wbf ddk driver does not. It engages and works in the background

  Please help me driver for windows 10 64-BIT

  Hi @mahmutbasar,

  There is no newer driver for Windows 10 fingerprint sensor. It seems that the old driver is not compatible with the Windows 10 either. So, if the fingerprint work in previous windows, it's a matter of software with Windows 10.

• My canon printer mx420 does not see my router to access point

  My canon printer mx420 does not see my router to access point. What can I do about it.

  Hello Rick,

  I went online on the website of Canon, and there were 25 games for "printer sees router access point; you might want to try this page: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx420?CMD=MIXED_SEARCH&mName=PIXMA+MX420&mType=PIXMA+MX&pageKeyCode=ekbresults&searchString=doesn't+see+router+access+point&BASIC_SEARCH_CURRENT_TOPIC_ID=1076&BASIC_SEARCH_CURRENT_TOPIC_TYPE=0&RESULTS=RELEVANCE&RELEVANCE_START=1&RELEVANCE_COUNT=25&CONFIGURATION=1011&PARTITION_ID=1&TIMEZONE_OFFSET=null&USERTYPE=1&isSecure=false .

  If you have no luck after visiting the Canon site, post back here with what you tried, and we'll go from there. I hope this helps you.

  Kind regards

  BearPup

• Installation of the printer driver Officejet G85 fails with the message "print processor does not exist" with Windows 7

  The site compatibility Windows 7 says that this OS is compatible with my Officejet G85 all-in-one old.  Whenever I try to add this printer is using the automatic functions or manual installation of the driver fails and I get the error message that "print processor does not exist.  I tried to install the original with the most recent compatibility software is Windows 2000, but Windows 7 does not allow indicating that the program already exists and I have to uninstall it first.  However, I can't find it listed anywhere for uninstall it, and the original software disk does not have this feature either.  HP does not support printer and would not help provide.  This printer worked perfectly with Windows XP and we really like it is equipped.  Please help us raise this printer up and running with Windows 7 64 bit home edition.  I tried things I found that it was similar in the forum with no success so far.

  Hello

  You can run the printer troubleshooter. Convenience store solves some common printing problems.

  If your computer has problems printing, try using the printer Troubleshooter to solve the problem. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  Reference:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  See the following articles from Microsoft for more information on installing a printer or driver printer:

  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  If the problem persists, you can contact the manufacturer of the printer for more information.

  http://WWW8.HP.com/ca/en/support-drivers.html

  Hope this information helps.

• My canon iP4300 not work on64 bit XP said ' print spooler does not.

  I recently changed my computer until I ran a system of 32-bit xp and now Iam updated to xp 64 bit system and my previously fine printer will not work. The message arrives:-"print spooler does not" ideas?

  Hello

  Step 1: I suggest you to download and install the driver appropriate from the following link:

  http://software.Canon-Europe.com/products/0010386.asp

  Step 2: Try the procedure described in the following article:

  "You can not print and you receive the error message"Spooler subsystem app has encountered a problem and needs to close"": http://support.microsoft.com/kb/810894

• Print spooler does not start

  I have problems printing due to the fact that the print spooler does not start even after restart pc & try manually in the services, there he gives me error 1053. It is configured to start automatically in the print spooler box, so I don't know.

  Hi Wobblesmf,

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description, it seems that the print spooler does not start.

  However, we need more information about the issue to help you better.

  Please help me to answer these questions.

  1. what version of Windows are you using?

  2 have had any changes made to the computer before the question?

  Visit the link for the operating system that you use:

  http://Windows.Microsoft.com/en-us/Windows/which-operating-system

  I have this link which should guide you in the right direction.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The steps mentioned in the link is for Windows 7. You can change the version of the operating system in the same link by clicking on the button beside Windows 7 drop-down and select the one that you use.

  Using the windows-related issues feel free to post on Microsoft Community.

• Print spooler does not. Unable to use printer

  Cannot print.  Cannot add a printer.  Can't download new drivers.  C:\WINDOWS\SYSTEM32\SPOOLSV. EXE is a program that does not work.

  Quote from: http://snipurl.com/1mdayq [www_eventid_net]

  From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.

  To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting.

  Hope this helps, Gerry Cornell

• wired keyboard 600 print screen does not work

  System

  Windows XP Professional 32-bit version 2002 Service Pack 3

  Dell Vostro 400

  Intel Core 2 Duo E4500 2.19 Ghz, 3.00 GB Ram

  Since I replaced the original keyboard with Microsoft wired keyboard 600 print screen functions are sporadic at best.  Sometimes Ctrl + PRTSCN works and especially it's not.  Even when Ctrl + print screen does not work I can not copy the active window by using Alt + PRTSCN.   I have a Setup dual monitor at work so that I can have the database, file explorere and opened in a window screen and development in another email.  I tried to download the driver from the Microsoft Web site, but he says that drivers that are installed are later.  (installed on the disc that came with the keyboard)

  Other than to start Microsoft keyboard anyone elese have all the solutions to make it work?

  Hello

  Follow these methods.

  Method 1: Follow these steps to run the keyboard Diagnostics

  (a) start Microsoft Keyboard Diagnostics. To do this,
  Click Start, click run, type mskey in the Open box, and then click OK.

  (b) press several keys to verify that the keys match the keys identified in the MS Key window.

  (c) when you are finished, click exit.

  If you get no response in MS Key on your keyboard, test the keyboard on another computer

  Method 2: You can also use the on-screen keyboard and check if you are able to take screenshot.
  For more information, see this link.
  http://Windows.Microsoft.com/en-us/Windows-XP/Help/on-screen-keyboard    

  If the methods above do not help, you can contact the Microsoft Hardware support.
  How to contact Microsoft if you have questions about your hardware device
  http://www.Microsoft.com/hardware/en-us/support/contact-us

• Installation of the printer. error: "printer spooler does not.

  Original title: printer Installation

  Windows XP SP3 home edition:

  Software printer installation error message, "printer spooler does not" no printer is installed or deposited.

  This suggestion can help.

  Quote from: http://snipurl.com/1mdayq [www_eventid_net]

  From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.

  To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting.

  Hope this helps, Gerry Cornell

• Print spooler does not

  all my printers have disappeared.
  It won't let me uninstall it it says that the print spooler does not work?

  Hello

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer
  (check with the manufacturer for the latest driver).

  Check Mr. Fixits here and if you must use other methods to go back
  and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - you can find at the top of the list and do a RIGHT CLICK.
  RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type in the Find box-> Services find at the top of list - make right click on-
  RUN AS ADMIN

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• WSD Print device does not have a driver

  Help!  I have a new Pavilion of HP with Windows 7 Professional 64-bit Edition.  I'm trying to install a HP Officejet 4500 printer via a wireless router.  The computer detects the printer, but then gives me the error under Troubleshooting in devices and printers that the WSD print device does not pilot and therefore will not be installed.  There are other the home computers running Windows 7 that are able to connect and print.  Unfortunately, my son lost the printer installation cd so I downloaded the drivers on the internet and still get the above message. I tried even to connect the printer directly to the laptop and the laptop does not show even a usb connection.  I have completely restarted (with assistance from HP Support) the new operating system for laptop to factory settings and still am exp eriencing the same problems.

  Can I go to a friends house and the laptop will detect and install this printer with absolutely no problem... What should I do?

  Hello leo.choo,

  These are the drivers that are available for the HP OfficeJet 4500 printer.

  I see that there are two models of printers. I don't know which version you have printer HP Officejet 4500 G510g all-in-one or the 4500 G510n all-in-one HP Officejet printer. There are separate drivers for every model.

  I suggest you follow the link below, enter your model number to download the drivers for Officejet 4500 Wireless printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3986399

  You can follow the link below to run, download and run the utility:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114788&cc=us&LC=en&DLC=en&product=3986399&tmp_track_link=ot_search

  Or alternatively, you can download the drivers for the Windows 7 computer that works on another computer and use a thumb driver to copy on their computer and install it.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.