cant conect to internet after reinstalling windows xp

Similar Questions

• No internet after reinstalling Windows XP

  My problem is that I just reinstalled XP but there are a few brands of yellow questions next to some devices. I am aware that I need to install drivers that windows can recognize these ports.
  The thing is, I don't really know the brand of my PC, all I know is that after opening, it appears that the motherboard is fsbighz ddr11800 (incredibly stupid, I know, but the cpu is old enough) I think it's a Dell but the model doesn't. etc I wouldn't be able to tell you.
  Using another PC with internet, I managed to locate the drivers that I need (by Googling the motherboard) I then downloaded the software on a CD and ran it on my PC without drivers. However after this software has me only said that the drivers that I need, and he then says that I need an internet connection to update them - which I don't have, so I'm in a situation of almost 22 catches. If I could get copies of the drivers, so I might be able to do, or even simpler - an internet connection on my PC so that I can update these drivers, perhaps through connection sharing the (which I do not know how?)
  Any help would be much appreciated

  You have to learn how to take screenshots instead of using a camera. :)

  Well, we were close. The image I posted is an ASRock > ALiveNF6G-DVI. What you have is an ASRock > ALiveNF6G-VSTA.

  The following URL uses drivers that you need.
  http://www.ASRock.com/MB/NVIDIA/ALiveNF6G-VSTA/?cat=download&OS=XP

  Good luck!

• HP Dm1 3025DX network controller drivers are not installed after reinstalling windows

  Hello

  I have a laptop HP Dm1-3025DX Windows 7 home premium 64 GB and after reinstall windows from the network controller and Ethernet controller both say the drivers for the device are not installed. I can't understand how to solve this problem or download either. I don't have access to the internet on this computer so I use another computer for this post, and I'll have to use this computer to download drivers also. Help, please!

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100668-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102448-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-90955-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  Judging people, see if they install.

• How can you recover files, folders, software and drivers after reinstalling windows xp family?

  original title: How can you recover files, folders, software and drivers after reinstalling windows xp family? Please help, I've lost everything!

  When the update Norton Internet Security 2009 to 2011 on reboot, windows cannot open.

  Root\systems32\hal.dll Windows prevented windows from opening.  My machine in a Dell dimension 8300.

  On a Dell website, I found a method of recovery if you can reinstall windows xp from cd.  I was able to do it, but lost all my files.  How can I recover all my fortune, images, software, drivers, etc.?  There must be a way to extract this information from the hard drive.  Any help is the material and can save my marriage!  Thank you.

  Hi MarkS_02127,

  Since you've reinstalled windows, you will need to re - install applications once again, you will be lucky (if you format the drive) data on your computer. You remember that location, it was in my documents? If yes it just open C:\Documents and settings and locate your old username, you will find your old desktop, Favorites and Documents.

  I hope this helps.

• Cannot connect to Internet after reinstalling vista.

  * - Original title - OUR Dell laptop came with the vista operating system

  OUR Dell laptop came with the vista operating system. Myhusband dislike vista.  Exp of Windows has been installed on our laptop.  recently, virus disabled the jury mouse & key.  I reinstalled vista. How can I connect to the internet.  I get an error msg.  the underlying ethernet connectivity required for the broadband connection was not found. pls install activate the ethernet adapter.

  Fran

  Hi Joseph,.

  I see that you can not connect to the Internet after reinstalling vista. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2 have you installed all necessary drivers after installing vista?

  3. do you format the disk hard while re - install vista?

  4. who is the ISP?

  I suggest you to refer to this article and check if that helps.

  Wired and wireless network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-vista&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• How much time after reinstalling window 7 32 Home Premium it take before that receive updates?

  * Original title: update Windows 7

  How long after reinstalling window 7 32 Home Premium does it take before that receive updates.

  Should be immediately the minute that an Internet connection is detected. I would advise that you install updates Windows Update batch well. There are about 300 post SP1 updates, more if you have reinstalled the version Windows 7 RTM.

  My recommendation would be to install updates in batches, these 5 at a time, exclude the hardware/driver updates. Avoid installing a set of updates for Microsoft Windows and Office at the same time. Also, try to install the first small updates. Avoid installing things like the .NET Framework and SQL Express updates.
  Whenever you install updates (it's a chore, but it guarantees a more reliable experience). Try to start the Microsoft Office updates for programs such as (Word, Excel, Outlook, PowerPoint).
  Another thing, try to download the updates, and then install them. When you are prompted to restart, disconnect from the Internet and restart your computer.
  To proceed with the installation of additional updates.
  If the continuous computer to become unresponsive, try the following:
  
  You can reset the Windows Update components by running the Fixit on this page.  But if there is malware present, she will continue to reset the connection to the update servers:
  How to reset the Windows Update components
  http://support.Microsoft.com/kb/971058
  Suggest you download and save the Fixit.  Then configure the system before the clean boot by running:
  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
  http://support.Microsoft.com/kb/929135
  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously.  Now run the Fixit and choose the default mode.  Restart once it's done and see if the system can be connected to the update servers.  If he can't, then rerun the Fixit and choose aggressive mode.  Turn it back on when he finished the race and updates.
  I suggest before you stop and install the updates, disconnect from the Internet, first.

• Received error 0xC004F063 after reinstalling Windows 7 on a new hard drive for laptop even. Help

  I have connected my pc today and noticed that my activation stated that my product key is not valid after several months of use!  I always been updated on system updates and activated the pc after reinstalling windows 7 ultimate on a new hard drive.  I receive the error 0xC004F063 of the activation process.  This indicates that the BIOS is missing a required license.  I contacted Microsoft by phone and by the representative of the India was not attentive and no help at all!

  All I want is my key is valid again so that I can continue on with the help of my pc normally.  Help, please!  I have a genuine Windows 7 Ultimate key and it has been installed on a new SSD for the same computer laptop that I use the key.

  Click Start, right click computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link change product key

  Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• After Reinstalling windows 7 stopped opening PSD files.

  After Reinstalling windows 7 has stopped opening some files PSD files. I try to open them with Photoshop version 6, it does not work. I tried to open them on the laptop, same garbage. Tell me what is the problem. And how to fix it. Thank you.

  Maybe these files have been corrupted. I can't say how it happened, but it is quite possible. And the files are no longer open, immediately after reinstalling windows? Or not?

  If so, it is very rare in my opinion. You are very unlucky. Try to reinstall photoshop. Then check that these files have been opened or not. In the opposite case. Then the only solution is a special software. I would use this program http://www.photoshop.recoverytoolbox.com/ on your site

  (it is not free but is very good and is not expensive. But in the future you will be immune to such situations. )

  So you can learn more about your problem here: http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/207-can-t-open-a-psd-file-th rough-photoshop

• Internet slowdown on a PC after reinstalling windows 7

  Thus, as part of my COMPUTER classes, I had to show I could maintain a computer. Then I took mine apart and put back together, checked it worked then wiped the HARD drive and reinstalled windows 7 ultimate 64 bit version. It is up and running now, but the speeds I get from my internet connection is incredibly slow.

  My main PC (that I'm having issues with) got up to 2 MB download speed until I reinstalled. Now, I have gone on speedtest.net and discovered that a ping takes 1074ms, I have a download speed of 0.66 Mbps and upload of 0.19. My laptop on the other hand, (both using the same network without wire in the same room on the same desktop) 30ms ping, D/L 14.97 and 0.81 upload speed. I tested it several times, making sure that the two ping the same destination, but the results are always the same.

  I reinstalled the driver wireless twice, I reinstalled the LAN connector twice and I have reset the BT homehub twice again the speed didn't get closer than two days ago. I spent many hours fishing trawl a few forums looking for advice, but I can't find any solution that helped. I tried a wired connection, I used invites them to drop and to renew the INVESTIGATION period. The only thing I noticed which seems strange to me is that neither of my a IPV6 connections.

  Can someone help with this problem?

  Hi, Will,

  Welcome to the Microsoft Community Forum.

  I suggest you check out article below and check.

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-CA/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

  Important notes:

  Antivirus: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Internet Explorer: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  When you disable the Antivirus: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Let us know the result. We will be happy to help you further.

  Thank you

• Internet / wifi doesn't work after reinstalling windows 7

  Hello, so basically, I reinstalled windows 7 Home Premium x 64 Operating System and it seems that some drivers are missing. I bought a new hard drive and 4 G of ram... I installed them, and the laptop is HP Pavilion dv6-2137sl Intel Core i5 CPU m430 processor, 2.27 GHz with 6 G of ram now.

  When I looked in the Device Manager I saw other devices: Base system device Base system device Base system device network controller unknown device unknown device. All have the yellow triangle.

  I tried to install a driver, Realtek PCIe GBE Family Controller driver, but after installation, it gives me the following message:

  Realtek network controller was not found. If deep sleep Mode is on please the cable.

  I don't know what that means.

  Any help would be appreciated

  Hello

  Pleae try installing the chipset Intel and Intel MEI first, then RESTART the machine. After that, try LAN (wired) again and then run updates of Windows 7. At the end, perhaps only one or two missing, please come back. You probably already know the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4105352#N267

  Kind regards.

• Error message: Ethernet is not a valid ip address configuration and cannot connect to the Internet after installing Windows 8.

  Original title: Internet not working after installing Windows 8. Help, please

  I installed Windows 8 a week before, which had Windows Vista. When I was with Vista, I had no problem with the Internet, I had. But shortly after I installed Windows 8, the problem began. The connection is hardly 2 minutes. In addition, it is not navigate beyond my home page. After troubleshooting the result came as Ethernet is not a valid ip address configuration. It makes me really frustrated. After all, I was looking forward to navigate in windows 8, this problem makes me think really bad. If someone could help me, it will be grateful to you.

  Manorajan respected,

  I too had d same problem but I solved it later on myself.
  Here's how to: -.
  1-make sure you have intel network driver I installed your windows it pc. Download (on any other pc and transfer and install in it) and install it in your pc respective windows 8. Here is the link to download:-http://drivers.softpedia.com/get/NETWORK-CARD/INTEL/Intel-Network-Adapter-Driver-172-for-Windows-8.shtml
  Den DOWNLOAD realtek lan driver here to install http://drivers.softpedia.com/get/NETWORK-CARD/REALTEK/Intel-Realtek-LAN-Driver-80030730-for-Windows-8.shtml..if in the installation of theres no error ignore it... do not panic and reinstall... as it is already installed

  2 - unplug your LAN cable and Wi - Fi

  3 - go to network and sharing den center left side d click on change adapter settings clik left on the network card intel

  4-go to "Ethernet Adapter local area connection' properties and Deselect"Internet Protocol Version 6 (TCP/IPv6) "

  "5 - Select" ""Protocol Internet Version 4 (TCP/IPv4) '

  Press the properties button

  6 - Select "use the following IP address:" option and set this ips

  IP = "ip address".

  subnet mask = 255.255.255.0

  default gateway = your ip from the router (you can recheck all say on any other pc having a successful conection even wid tell by checking the properties of dial-up connection or any smart phone like any iphone or android mobile, if it is used as a wifi too in led staus/properties to your respective wifi name)

  7. in the second section select "use the following DNS server address:"

  Set "Server DNS PreferAlternate:" your router ip that entered u in "default gateway of" this. " pinterested ok and try to connect in wireless lan

• No Internet after October Windows 7 update

  I have Windows 7 Home Premium 64-bit. 10/13/2010 my computer has installed several Windows updates. Immediately after the restart, I couldn't have an internet connection on Firefox (or Explorer or other).

  Problemmatic computer is a brand new Dell XPS 7100.  It came with a 15-month McAfee subscription, which I immediately enabled to connect to the internet.  I am connected to the internet via an ethernet cable, attached to a Belkin Wireless Pre - N Router.  My old computer is also connected via ethernet to the same router and works fine.  Wireless on this router also work with a macbook.

  I tried to connect my cable modem directly to the Dell printer, but also without result.

  Any thoughts?

  Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the Web page":
  http://support.Microsoft.com/kb/942818

  If not help to tweak the parameters of your third-party firewall, try the following:

  1. disable your antivirus, real-time protection provided by an anti-spyware application (with the exception of Windows Defender; includes the Tea Timer to Spybot, Ad-Aware Ad - Watch & guard, guards SpySweeper, etc.), disable any third party (e.g., McAfee) firewall AND THEN select Windows Firewall.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #XX below.

  2 Uninstall "Cumulative Security Update for Windows 7 (KB2360131)" or "Security Update for Microsoft Windows (KB2360131)" via start | Control Panel | The Maintenance and the system (if you use Classic view, skip this step). Programs & features | Installed updates day & reboot.

  3 d - c #1 above.

  4 manually run Windows Update and install important updates available (i.e. KB2360131).

  5 reboot & make sure everything in #1 above is on again and, if necessary, disable the Windows Firewall and enable (or reinstalling) your third-party firewall.

  =====================================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After reinstalling Windows XP I get errors saying ' cannot read memory: 0x7e4195cb'.

  Recvd the blue screen of death on my desktop dell (3rd time), could not function in safe mode. Reinstalled Windows XP, put in the product code to be reactivated, obviously could not get to the internet for activation. now get error msg can't read the memory at 0x7e4195cb, click on Cancel to debug, getting same msg of error with different location? I probably wiped out the recovery with the installation of new partition... any help?

  original title: BSOD with new installation

  I hope that you also didn't erase the utility partition. Press F12 immediately after startup to see if she's still there and you can enter. Sure looks like one of your hardware components is bad!

• computer does not connect to the internet after reinstalling XP SP2 wit

  After that the computer we reinstalled windows XP with SP2.  The operating system loaded fine, but don't can't get the computer to connect to the internet.  Went through all the steps suggested even check the Service Manager to ensure that the appropriate services are started.  Any help would be appreciated.

  Hi DamonBrigham,
   
  -What exactly happens when you connect to the Internet? You get an error message or error code? If Yes, indicate the same.
   
  -Do you have a cable or a wireless connection?
   
  If this is a wired connection, try starting mode safe mode with network and check if you can connect to the Internet successfully.
   

  Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.

  See this link for instructions on the boot safe mode with networking:

  A description of the options to start in Windows XP Mode