CANVIO SLIM - 2.5 "- 500 GB - SILVER - USB 3.0 driver"

Similar Questions

• Canvio Basics 2.5 500 GB needs for a long time to transfer files

  To transfer approximately 150 GB (video and photos) from a Basics 2.5 Canvio external hard disk 500 GB my computer indicates a duration of 16 hours. I've never seen those moments there high with the other external hard drive. Why?
  Thank you

  https://Forum.Toshiba.EU/showthread...322#post334322

  It will be useful,
  Mario

• PX1394E - 3 50 (500 GB HDD USB 2.0) not recognized by Win XP SP2

  Hello. I just bought and traded because I thought the first was faulty, a PX1394E - 3 50 500 GB HDD USB 2.0 external hard drive that uses Fire Wire, USB. Now I ve tried all USB devices, to begin with it uninstailling everything on we / off on to just pluging it when we / off and it keeps saying be the devide was not recognized and it doesn't propperly (small box pop up bottem left of the screen)

  Now Issve exchanged it once already, and he said that the unit was defective, but having exactly the same problem with two different cameras? This seems a little more bad luck for me.

  If anyone can help, that´d be great.

  -Dan

  Hello

  You have software of Regen with your HARD drive? I don't know if this can help, but check the Toshiba download page and you'll find a version for Windows XP Home edition. Maybe this will help.

• HP laptop laptop 15-ay019tu: shortcuts keyboard and HUB USB 3.0 driver is missing, I can not find anywhere then please provide some suggest

  I tried to install drivers in my new pc and I almost did. But I can not find the driver HUB USB 3.0 (that is listed as "unknown device").

  Another problem in the function keys. They do not work. So I need to install the driver of access keys

  I have tried many on the internet until now, I can't able to find drivers for my computer so please suggest a useful site to download the two drivers.

  Hello:

  For the question USB 3, download, unzip and run the file setup.exe from the link below.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-Intel-C220-C610-chipset-family?product=65855

  See if installing this software gets the Fn keys to work.

  This package contains the HP System Event Utility, which allows the special function keys on the laptop to program models. For example, HP System Event Utility allows users to press the Fn + ESC keys to view system information. This package is provided for the supported models running a supported operating system.

  http://ftp.HP.com/pub/SoftPaq/sp76001-76500/sp76383.exe

• Pavilion c 500-467: windows server 2008 display driver

  I am running Windows Server 2008R2 64 bit on a pavilion with a HP2509m monitor 500-467c. Which shows the driver works with this combination of material? I see Windows 7, 8 and 10 64-bit on the driver list, but not Windows Server 2008.  Help please!

  Hello:

  You want to try the W7 64 bit drivers for 2008 Server R2.

  Try to install the drivers manually if automatic installation method does not work.

• Portege R100: Recover the CD USB 2.0 drive?

  I need to reset my Portege R100 to factory settings, erasing the hard drive and remove all documents and programs. I don't have a Toshiba CD-ROM drive, only a CD/DVD of LaCie USB 2.0 drive. It worked with other laptops, but I can't get the R100 to start with it.

  Does anyone have a suggestion?

  Hi soren,.

  Maybe you know that you can start from the CD-ROM when you push the 'C' button for aprox. 3 seconds when you press the power button. But it's only for internal solutions.
  In your question, you could test whether it works when you push "U". 'U' stands for USB device!

  Hans Bye

• 250 GB USB external hard drive is compatible with Mac OS x on an iBook G4?

  Hello

  I just bought a Toshiba 250 GB Usb external hard drive because the seller advised me telling me that it works in my iBook G4 Mac OSX computer.

  I made it and I see it on my desktop with a folder called System Volume Information and 2.32 GB available.

  I tried to copy a file and I got a message saying that the disk is not editable.

  Where can I find the instructions to initialize if it's compatible?

  Thanks in advance,

  Joan

  Post edited by: jinglada

  Post edited by: jinglada

  Hello

  I'm not sure on this subject, but maybe you have to format it.
  Are there issues listed in the Device Manager?

  Good bye

• Satellite 1800-712 does not recognize my USB external HARD drive

  Hello

  I would really appreciate the help. I own a satellite 1800-712. I have receently bought a usb external hard drive for some extra memory (IE Toshiba MK4026GAX USB Device)

  When I connect it to my usb port it records any with the computer. The green light so there is power to the hard drive. The usb ports recognized of other fine features (a modem and memory stick)

  I tried the external hard drive on a desktop pc and it works fine.

  I have downloaded all windows xp service pack updates and updated my bios. Don't know what to do now.

  Please help and thank you in advance!

  Hello

  Although sometimes, I know that the OS is not able to recognize the external USB device, because the device external USB (HDD) consumes more energy than the 500mA.
  The USB ports provide 500mA power and if the device needs more power so it s is not possible for the Windows operating system to recognize the external device.
  You have an external power supply for the USB HDD? You should use it.

  Good bye

• Portege 3480CT: how to make a USB bootable floppy drive?

  I need help to make a USB bootable floppy drive.
  My laptop 3480CT has not the traditional floppy drive instead, it uses a USB floppy drive and the bios has an option to boot from USB FDD.

  I would like to use a USB key to start (a Lexar Jumpdrive 32 MB 05dch 0080 h and GTX 1 GB 1516 h pid pid 8628 h), instead of the floppy. I want to load the boot XP on floppies, so I run recovery programs using chkdsk.

  I tried the usual suspects, the bootloader makebootfat and mkbt20 HP.
  I tried the demo version of the commercial product Flashboot.
  I photographed a floppy back 5.0 system on the USB key using the I-Setup demo.
  All failed including the specific option in the makebootfat images for FDD option and 3 different options of Flashboot.

  I ran
  http://Enos.itcollege.EE/~mkalme/Pahn/tut/tut.html

  Using Hexplorer ICY, I was able to confirm that the DOS5.0 on the boot sector pendrive is identical to the diskette.
  I could start in Dos5.0 from a floppy disk with drivers USB Panasonic and confirm that my Lexar was a system of 1.44 MB disk and command.com displayed in the directory. The GXT is not recognized by the Panasonic, nor BACK USB drivers to Duse 4.4 4.9. Another worrying indicator, it is my computer XP did not see all of the files on the pendrives, not command.com, or two hidden files (view all the hidden files option).

  I learned that Transcend a specific option that creates a bootable 1.44 mb floppy
  image on their USB key.

  Here is what I have gathered, corrections and suggestions are welcome.

  Interface USB the USB protocol specifications

  bInterfaceSubClass field specifies the Protocol
  01 order reduced block (RBC) a flash device
  UFI 04 a floppy drive floppy drive
  05 FDD SFF-8070i SFF-8070i command blocks however, funding may be in a different subclass for example RBC

  bInterfaceProtocol field specifies the transport protocol
  00 control/Bulk/Interrupt (CBI) with break of completion for FFD only
  01 CBI without interruption of completion for the FDD only
  transport in bulk only 50 h, including priming

  I don't know if the USB controller must imitate the FDD Protocol.

  Any ideas?

  Hello

  You cannot boot from the USB key.
  The BIOS of the laptop does not support something like that.
  Laptop factory supports and use different BIOS versions. As far as I know on this laptop Toshiba BIOS was installed.

  To my knowledge this BIOS does not support booting from the USB key, but only the HDD, ODD, LAN or USB - FDD.
  If you want to boot from USB FDD, you can create a bootable FDD floppy.
  Windows operating system creates the boot floppy drive when you right click on the connected floppy drive and select format. Then simply choose the option create MS-DOS startup disk start.

• HP TouchSmart 600: External Toshiba USB 3.0 drive not recognized on HP Touchsmart

  I have a desktop HP Touchsmart 600, and I bought a 1 to Toshiba external USB 3.0 drive and when it plug to the USB port, it does not, even tried the other port and restarted, but does not yet recognize, I tried to reload the USB Chipset, but no cigar. I am able to use it on my Sony laptop. I would be grateful for any help or suggestion. Thank you people.

  Hi @StevieB1,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the external drive not being seen. I'll be happy to help you.

  Please, try the steps in Troubleshooting connections USB (Windows 7).

  I hope this helps. Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Pavilion notebook 15 ac044tu: usb 3.0 driver

  Drivers HP pavilion 15-ac044tu usb 3.0

  Please, I'm trying to install the usb 3.0 driver in Windows 7 64 b, but I can't insall drivers...

  Can you help me?

  Hello:

  See if the USB3 directly from Intel driver works for you...

  Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-series-and-C220-C610-chipset-family

• Toshiba USB external hard drive 250GB shows only the red light - sound of rattling

  My USB HD external drive to Toshiba aged 16 months stopped working yesterday. It shows just a flashing red light
  and makes a slight clicking noise. Of course, we cannot guarantee any more. But all my backups are on this drive,
  This means almost 10 years of work destroyed if I cannot access this disc more. Someone knows what to do to fix
  This problem?

  Post edited by: admin

  I put t know what the flashing red LED could mean, but it looks like a HARD disk head crash. Perhaps you could find some details in the user manual that the flashing light means.

  However, he still stupid s cases of dysfunction of a backup media situation. I had a similar problem with my 2.5 100 GB USB HDD. After about 3 years of work, the HARD drive died and I was not able to access the HARD disk. I was a lucky man because I have backup my data also on the DVD so I was able to restore the files and data.

  What to say maybe s possible to save data, but professional help would be necessary. Maybe you should contact technicians for assistance.

  Best regards and good luck buddy

• Windows 8 and USB external hard drives

  I want a new dv7 with Windows 8 and an Iomega Prestige 1 TB external hard drive I use successfully on Windows XP, Windows Vista and Windows 7 systems. It behaves erratically in Windows 8. Sometimes it is not recognized at all. Sometimes it is, but trying to access it via Explorer, Windows crashes requiring a diet forced down. Other times, you can access it with success and even copy a file to it with Solution Explorer, but if you try to copy multiple files with the same drag and drop, it displays the calculation time to copy file window, but the calculation done so forever, just stays there. Also, when you try an Xcopy in the prompt with mutiple files and / or files, copy the first file he is suspended from the command window. The system has a newly updated BIOS and all installed Windows updates. Ideas?

  Tried moving the Iomega for a USB 3.0 drive (the drive is 3.0 and 2.0 compatible) 2.0 in Windows 8 port and it now works fine. No idea whether the problem with USB 3.0 with Windows 8, HP or Iomega.

• Where is the info on iomega Prestige USB 2 HARD drive?

  Where is the info on iomega Prestige USB 2 HARD drive? I just got this (used) and can not get

  It copies information very fast. I formatted this unit, for Windows 7. I made a backup of

  my computer. This computer has apx. 300 GB of info. After 10 hours had the iomega

  only downloaded 38%. Have I not a DUD?

  Also, please tell me where to post or get information on this hard drive. Please

  the URL of the list. Your view is for smart people, I'm not.

  Note of the moderator; edited topic.

  Mr. Lenovo,

  I used a new cable this morning. The player had made a backup in an hour and twenty minutes.

  This is the first time I experienced a bad USB cable. Always a first time.

  The only difference that I noticed this trial, has been anything but downloaded unit on 7 GBs in

  tweny minutes, it took an hour to complete the last 7 GBs. We'll see how it works

  thereafter.

  You can close this investigation. Consider that everything accomplished.

  Thanks for the help and information.

• HP pavilion pc 17-e061sr USB 3.0 driver

  Hi all

  I installed win7 x 64 professional instead of ugly win 8.1. All exepting bluetooth and usb 3.0 drivers were found.

  I found the USB 3.0 driver on this forum, but install have not led to any results. Two usb 3.0 ports, located on the left side of the laptop are always not workng. In windows, Device Manager usb 3.0 is known as unknown device.

  Please, help me find the necessary drivers, because it's very solutions to use only a single usb port

  Hello:

  See if this driver usb 3 works...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118604_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken