Capacity lost to display the items falling down

Similar Questions

• T460s display the driver falls down and solution?

  While move text to a text editor Final project 9, display driver crashes, then crashes again. The next day, the same thing three times. So I decide to change the scale to recommend it a resolution of 1080 full. The recommended scale is 150%, I go up to 125% and power the computer like this for a few days. and all is well. So I decided to try the scaling to 150% once again and the display driver crashes twice in one hour. So I'm now operating at 125% and it is stable again, maybe the (recommended) must be attached to the 125%.

  In response to the reports of customer in the video drivers to crash and error message display "display driver stopped responding and recovered automatically ', Lenovo launches an Intel driver on March 28.

  Once published, v20.19.15.4380 of the Intel video driver will be available here: http://support.lenovo.com/us/en/downloads/DS105466

  Thank you

• A specific folder, do not display the items as planned

  I don't know how it happened, but somehow the items in a specific folder began to display the items in a way that I really don't like. I tried to play with the settings (including top-right), I found, but nothing helped.

  Here is the image I have, so I can show you what I mean. See how the items are displayed in the top picture? And see how items should be displayed in the background image? I want my file to look like the 2nd picture below.

  

  Click the blank white areas in the file and choose Group By: None

• Impossible to display the items in the start menu

  Home Premium SP2, IE8. Dell laptop.

  I must have tried mistakenly and unknowingly add an element in the Menu start (one on the right).
  Now, if I click on the Start button, I have a message saying that some elements of the Start Menu may not be displayed, and that I should change to a higher resolution.
  Here I am on the highest resolution 1280 x 800 pixels
  Color is set to 32-bit.
  Screen refresh rate is set to 60 Hertz.

  System Restore is out of the question that I had made a diskcleanup and deleted all the points except the one under restoration.
  I can't figure out what I wanted to add to the Start Menu.
  Anyway to find out?

  t-4-2

  I almost checked everything and I do not get this message (but I'm at 1920 x 1200 pixels).  The thing is, you have probably really all these elements if account required to limiting the size, you'll just need to identify the items you really need/want and uncheck the others until the message disappears.  Most of these items can be added as shortcuts to the office or the menu all programs for options is a click on Show desktop and clicking on the option instead of a click on start and click on the option (even two clicks so be it - more if you put the shortcuts in all programs rather than on the desktop).  If you are having problems, create the appropriate shortcuts, just post back exactly what are the options that you want as shortcuts and we will see if we can help you (if you still need that).

  As much as what option you want to add, I have no idea and no way of knowing.  You must include only what you actually use frequently.  Don't forget, there are other ways to do all these options, even if they are not in the Start Menu, you can still get where you want to go (just may take a little longer).

  The only other choice is to upgrade your video card so that it supports a higher resolution (assuming one is available that is compatible with the rest of your computer and its devices - in particular, the monitor and motherboard - and also compatible with your version of Vista).  But this seems a high price to pay just to be able to see a few buttons in the Start Menu.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• OBIEE answers how to display the menu drop-down

  Hello
  In answers how to display the name that we choose in the drop-down list on the report page
  
  and another thing is that I want to display the number of lines in the report as report salary has 20 lines, followed by the 20 lines in the report
  
  Waiting for your answer.
  
  Rgrds,
  Bala
  
  Published by: user13068446 on May 13, 2010 22:30

  create a report and save it.

  now, to create a line of dashboard your wish to keep as it's the default SNA record the prompt of the dashboard.

  now, go to the dashboard - options - section drag and report him.

  now do drag the guest to this article and put this promp above the report...

  Save it
  Now you can see the drop down prompt menu selected

  Concerning

  J Mama Prasad

• Display the menus drop-down InDesign CC, but tools can be selected - running in El Capitan

  I trashed preferences and caches, but this did not help.  I can see the tools (the menu fly out) but I can not choose the tools found in the fly-out.  A little stuck.  Help, please!

  Well, I've found a workaround.  Considering that, before, I would choose a tool with the pointer (but who would choose the tool in the menu drop-down), I discovered that if I pressed the option + command (Mac) buttons while selecting the tool on the fly-out, there select the tool and make it active.  So, problem solved immediately.  (In fact, using the keys in this way, I expect to divide all the tools, so they each have their own individual box - I have the screen space to do.)  (If I remember correctly, Adobe Pagemaker (wow, remember that?) lets you do this.)

• Error in the system falls down with STOP 0X0000008E

  My crashes system with Stop error 0X0000008E who it is and how I can fix the problems... Thnx for any advice

  Stop error 0X0000008E (0XC0000005, 0XBF2CF595, 0XA2ED7BA4, 0x00000000)

  igxpdx32. DLL-address BF2CF595 base at Bfl86000, DateStamp 00000000

  Beginning physical memory dump

  Total physical memory dump.

  Without more information, we can only speculate...

  If this happens whenever you watch a video, it's a good clue that the problem could be in your audio or video configuration, then you should start looking there.  Then, if you make adjustments, you can check your known failure scenario (watching a video) and see if the problem is resolved.

  These are the same questions I ask everyone who has a BSOD problem:

  Please provide additional information on your system, and we have all this and much more.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Your system seems to start OK and then crash or didn't he start not at all?

  If your system works fine, what do you think might have changed since the last time it worked correctly?

  Can you make the system crash when you want
  ?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).
  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If there is a name of the file listed in the STOP message, don't forget to include this information too.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.
  Now provide more information about your system and data against more recent accidents.
  Click Start, run and enter in the box:
  Msinfo32
  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  For information about the audio drivers, expand components, click Sound Device, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
  This will minimize back Q & A and eliminate guesswork.
  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt
  .  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
  ==================================================
  Dump file: Mini062110 - 01.dmp
  Crash time: 21/06/2010-11:51:31
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
  ==================================================
  Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).
  While you wait, please follow these steps:
  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Restart your computer and solve the outstanding issues.

• MSConfig does not display the item (by default) startup under HKCU\Software\Microsoft\Windows\CurrentVersion\Run. Bug creates the feat of malware to hide the user startup items, msconfig.

  The following question will fail be displayed in MSConfig

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun]
  @= "c:\\users\\steven\\appdata\\local\\temp\\6csjbd5.exe".

  I came across this, after being attacked by malware. In general, I use MSConfig to disable all startup items when troubleshooting an attack and attempt to regain control of the system. MSConfig lead me to believe I had disabled all startup items, but he fails to show or disable the (default) entry to the registry key above. Indeed, it's an exploitable bug that is currently used by malware developers to hide from end users, armed with MSConfig. As a side note, CCleaner has the same problem. The only solution is to change the value directly using RegEdit (clear).

  Hello

  Method 1:

  You can run Windows Defender in offline mode

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  Method 2:

  Analysis System File Checker and check:

  How to use the System File Checker tool to resolve missing or damaged on Windows Vista or Windows system files

  I hope this helps!

• Advanced configuration of pricing price list displays the items of the other operation of the unit in the value of the product

  Hello!

  When I set up a new price list and entered in the value of the product (product - item number attribute) column, the LOV displays items in another business unit. What should I put to see items in my business unit?

  Thank you.

  Jon

  I think I found the solution. I have set the option of profile PS: point Validation to my business unit organization.

• RoboHelp 2015 "Display the item" button doesn't seem to work

  Hello!

  Here's my problem: when a topic is opened in the design editor, by pressing the button 'Show element' in the Ribbon Edition does nothing. No new window is launched, nothing!

  I am completely new to RoboHelp software and my supervisor is puzzled. If anyone has experienced this problem or know a solution?

  Thank you!

  Hello

  After you click on "View item" and nothing is not displayed, try pressing and holding the key of the Windows logo + left arrow a couple of times.

  If nothing appears?

  See you soon... Rick

• How not to display the item to delete when an application icon is selected

  Menu items should be indicated when the application icon is selected and you click on the menu button. The delete element will be shown for some application and application is deleted after selecting the element removed. But for some applications, delete it the article does not appear when the application icon is selected and you click on the menu button. We want to protect our application which cannot be deleted when our application icon is selected and you click on the menu button.

  Who knows how do not show don't delete the article when an application icon is selected?

  Some applications that are part of the core OS can not be removed in this way (for example, help).  This applies however to Facebook.  He could have been driven out of your BES.

  There is no way to remove the delete option for a third-party application other than marking as required and pushing the BES.

• value change event not called on the evolution of the value falling down

  
  Hello

  I have a drop down with values such as... 1-25, 26-50 and so on.

  I need to see the 1-25 as pre-selected when the page is loaded. and when we change the value in the drop down a listner valuechange is called and will service call.

  But when I again selects the default 1-25, at the time where only the value changes listner is not called.

  To show the value that pre-selected I put:-noOfRecSOC.setValue(1);

  noOfRecSOC is the drop down on the screen.

  You must not directly set the value in the UI component. Use the property value drop-down list together for years by default here. Otherwise the value change listener do not notice the change to the original value (as it is never changed).

  You can use a variable temporary pagedef for the value. check out my blog Creating Variables and attribute Bindings to Store values temporarily in the PageDef | JDev & amp; ADF Goodies to find out how to do this.

  Timo

• display the items in the Web application on a default map, zoomed in on the Indian ocean?

  Hi, I want to install a web application to display locations for a store, but after adding some web elements, all in the middle of North America, when I load the map app webapps, the default view is zoomed in on the Indian ocean...

  Shouldn't; little zoom in the nearest you address web app components?  I have to manually zooom all the way, then in a marker that is properly pinned...

  I had similar problems on some sites that usually comes from not having BC does not zip codes in their database.  You see a pin point in the middle of the ocean? If Yes, then this particular postal code for this element of web application is not in the database, in this case, contact technical support, and it adds the postcode.

  If you do not see a pin point, I'm guessing that maybe your default search radius is maybe average to great and he's trying to adapt to everything on the screen in the search radius?

  Try to set the radius of search at different levels and see what you get results and anyway maybe contact the Support with a list of specific zip codes to make sure they are in their database.

• "Unspecified" value in the prompt fall down

  Hi all
  
  I am facing a very unusual problem in my report.
  
  The value "Not specified" continues to display until in the prompt drop-even if does not really exist in the database.
  This value 'Unspecified' refers to the value NULL.
  
  I tried to use a filter on this field with filter ' is not Null', but this does not worked either. "
  
  I'm stuck.
  
  Does anyone have a solution to this?
  
  Thank you very much
  -Roy

  Try this simple thing:
  for your ground quickly in the design, select the results of sql under the option display and write a query as name of SELECT field OF... Name of the field WHERE NOT NULL.
  It's no need to filter in the report.

• I don't get an error message when the night falls down.

  Recently, my browser crashes a lot, but I don't get any error reports or whatever it is asking me to send a report to Mozilla.
  I use nightly (64-bit) and I update automatically (currently 24.0a1). My OS is Windows 7 Ultimate (64 bit). Telemetry, nightly health reports and Crash Reporter are activated. The last update was 2 hours before and the one before it was 2 days before. From the last update, it stopped the plant.
  My concern is that there are at least 6 accidents record in reliability monitor in the control panel in this time, but when I checked the AppData, there was only 1 this report incidents and not in the waiting for that time. Should I be worried? I always send in information?

  Is not necessarily all the time, but in cases like this when there are problems with the 64-bit version, then you should check if this happens also with the 32-bit version on your computer as part of the basis of troubleshooting (reinstall 32-bit clean, new profile, etc.)