Capacity/size of the detected incorrectly source Volume

Similar Questions

• Why I no longer storage capacity after moving the files of external volumes?

  Disk utility reported that I had only 29.76 GB available; the 250 GB SSD was used as follows:

  Apps 48Go; Photos of 32 GB; Audio 24GO; 18 GB movies; Other 99.72 GB; Available 29.76 GB

  After moving to photos of 34.2 GB external volumes, films of 6,76 GB and files of documents 1 GB, disk utility has reported:

  Apps 48Go; Photos 9GB; Audio: 24 GB; Movies 11FR; Other 132,14; Available 29.76 GB

  After moving ~ 42 GB of data to external volumes, HD of 'other' content is passed to 132,14 GB 99,72 GB.

  Not after winning more space, I moved other files; Other rose the same amount and available showed I have now 39 GB

  I don't understand why 'other ' space used increases as much as I thought I had released.

  So, how can I increase the space available in this SSD?

  Thank you

  You can try to reboot to refresh

  or terminal may have a current look used and available to your applications/Utilities/Terminal.app

  copy and paste:

  DF H

• Cannot increase the size of the volume of windows

  Hello

  I increased the size of the volume in Dell EqualLogic Group Manager (GUI). On windows, I see that volume capacity is 200, but it does not increase the size of 200 GB. After scanning disk total size shows that only 100 and not any unallocated space available size. Is - this 2012 windows bug? don't know where to start troubleshooting. The server cluster connection is via iSCSI.

  I see unreserved space EqualLogic, but not in windows,

  Thank you

  Hello

  It * should * work, but it seems that perhaps services cluster prevents the operating system of new reading ability.  Could take a failover or even restart the cluster nodes so that it can see the new space.

  If you have the support of MS, it would be worth a call to them as well.

• «FAILED: failed to create a snapshot of the source volumes VSS.» Error code: 2147754758 (0 x 80042306). "Down to 1% with autonomous converted 5.5

  Hi all

  I'm trying to convert a physical Windows 2008 R2 (SP1) virtual, using Vmware vCenter Converter Standalone version 5.5 build 1362012, it fails at 1% (after around 40mins) with the following message

  Failed: Failed to create a snapshot VSS of the source volumes. Error code:
  

  2147754758 (0 x 80042306).

  
  

  Windows systems has some LUN (4 x each various size GB) San, being the GUID (GPT) Partition Table.  I went through the wizard as a general rule, by selecting "edited on the machine", a player selected vmware "vmware workstation" or another vmware virtual machine destination 6.0.x and the location of the target being a LUN with 500 GB of space.

  Now for the data to be copied I selected 3 LUN (on a database resides) and put the 'Size' option (but I tried to keep the size of the various passes) to save space.

  
  

  Looking through the logs, I see the following errors

  Server-convert-VMware - 1.log

  2014 01-16 T 19: 42:37.371 - 07:00 [info 08696 'Default'] [serviceWin32, 416] Server vmware-converter service started

  2014 01-16 T 19: 42:51.006 - 07:00 [08696 info "Libs"] username [ADS] Get failed: 1332

  2014 01-16 T 19: 42:51.006 - 07:00 [08696 info "Libs"] [ADS] subtle failed: 1312

  2014 01-16 T 19: 42:51.115 - 07:00 [info 08696 'Default'] [user, 874] successfully authenticated the user administrator of the local computer (by using pipe)

  2014 01-16 T 19: 43:38.898 - 07:00 [10116 info "Libs"] username [ADS] Get failed: 1332

  2014 01-16 T 19: 43:38.898 - 07:00 [10116 info "Libs"] [ADS] subtle failed: 1312

  2014 01-16 T 19: 43:39.023 - 07:00 [info 10116 'Default'] [user, 874] successfully authenticated the user administrator of the local computer (by using pipe)

  2014 01-16 T 19: 43:39.647 - 07:00 [info 07628 "ThreadPool"] Thread has enlisted

  2014 01-16 T 19: 44:26.152 - 07:00 [08696 error 'Ufa.HTTPService'] cannot read the request; flow: io_obj p:0x0141b84c, h:-1, < tube "\\.\pipe\vmware-converter-server-soap" >, < pipe "\\.\pipe\vmware-converter-server-soap" > >, error: class Vmacore::TimeoutException (operation timed out)

  2014 01-16 T 19: 47:32.

  Worker-converter-VMware - 1.log

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 "Default"] disk number 1 has been ignored due to errors when reading partition table

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 "Default"] disk number 1 has been ignored due to errors during playback of dynamic disks header or LDM database is corrupt

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] [MoveActiveDiskIfNeeded] GetFirstBootDisk failed, error mntapi: 176

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] score: Invalid magic number sector.

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] score: Invalid magic number sector.

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] [PopulateCapabilities] based on the Volume of cloning has been disabled due to: no volume is recognized >

  ..

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 "Default"] Partition: ERROR: MBR sector must be present and valid initialize to GPT disk.

  2014 01-16 T 19: 47:34.354 - 07:00 [info 07248 'Default'] signature of disk found 80a2884a-05e9-4c1b-81-3d-35-1b-a3-6c-4b-bc, drive to 225981112, sectors 512 sector size size

  2014 01-16 T 19: 47:34.354 - 07:00 [info 07248 "Default"] Partition found type Efi system / single 4078aaff-430e-4825-bf-07-67-c6-ab-a1-87-3f

  ...

  2014 01-16 T 19: 47:37.365 - 07:00 [info 07596 "ThreadPool"] wire removed from the list

  2014 01-16 T 19: 47:37.412 - 07:00 [10164 info "ThreadPool"] Thread has enlisted

  2014 01-16 T 19: 47:37.459 - 07:00 [info 07696 "Default"] MNTAPI: mounted volume \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.584 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.677 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.755 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.849 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.942 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:38.052 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:38.098 - 07:00 [10164 info "ThreadPool"] wire removed from the list

  2014 01-16 T 19: 47:38.098 - 07:00 [info 03736 "ThreadPool"] Thread has enlisted

  I wonder if the converter is not able to work on the GPT partitions?  (I think I saw some discussion of the community on this problem using v.5.1, but using 5.5 should be resolved?)

  Any help is appreciated. Thank you

  Your problem is with VSS, it is probably the lack of space, to seek solutions and similar problems.

  Errors that you see are expected, we need a full newspaper bundle for investigation and don't warry on GPT disks, they are supported with converter 5 +.

• [CS5] Change the size of the possible related images by updating the source?

  In a catalogue, I use 400 cases of 10 small labels. The labels are in a linked Illustrator file. I would like to be able to adjust the size of these labels simply by changing the file source and updated the link.

  I know Indesign is normally set up to preserve the physical size of the images, but I thought I could change this by a combination of options of file management and mounting the frame object Style options. I tried various things but so far without success.

  Is this possible?

  Update: I can change the size of the image allright, but the image does not follow. The mounting frame object Style options work only the first time?

  Is there a solution?

  Preference to preserve Image Dimensions when rebinding, when not checked, should retain the same scale, but it is not all cut a dry with an illustrator file, I think. Much will depend on how you change the dimensions to Illy your cropping choices when you have placed the art. If you chose the media and you do not change the size of the artboard, ID is not going to see a change in size. If you chose the rectangle enclosing or Art, most likely a size change will be detected. Is this clear?

• Help? the source volume is read-write and can not be disassembled...

  I use 10.11.5 on an iMac 21.5 ", end of 2009 and I want to restore the OS X 10.11.5 to HD on an external drive but I get this message" Source volume is read = write and cannot be disassembled, so it cannot be copied from block. "  I can find answers do not address El Capitan.  Help would be greatly appreciated.

  .. .Goldie

  You use disk utility's restore feature?

  If the HD has a recovery partition, you can make starting in place of the recovery.

  Or you can use SuperDuper! (the basic version is free and can copy the entire disk, the paid version allows "smart updates", which copies only files that are different, saving time) running on externally to perform the copy.

• Update BIOS Qosmio X 300 has failed - the size of the ROM file is incorrect

  Hello

  I use TEMPRO, and he suggested to update my BIOS.
  I downloaded the file and run the Setup file. Unfortunately, it says "the size of the ROM file is incorrect.

  This means I m doing wrong? or I have the latest BIOS in my system.

  Please advice.

  Thank you.

  Hello

  First of all I don't do everything what said Tempro!

  Secondly, this message was posted here in the forum several times and if you are looking for the size of the ROM file is incorrect, you would find that:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=120455
  and this, for example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=73284

  The problem is that you have unzipped the Cabinet correctly!

  In any case, I think that it s not useless to put anything, if the laptop runs without problem!

• Error message incorrect file size when the BIOS update on Satellite M100

  When you try to install the BIOS update I get the error message: incorrect size of the ROM file. What can I do? Thank you.

  Hello

  Today is your lucky day dude. Seems I found a solution :D
  Pelase take a look at this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19974&MessageID=73284

  The user JayJay has provided a link to the Toshiba document that helps to clear this issue.

  It is the original document;
  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  Please try it and post if it was the key or not. Good luck

• Update the BIOS of the A110 to satellites--&gt; the size of the ROM file is incorrect

  I tried upgraing BIOS download from Toshiba site but error message.
  The size of the ROM file is incorrect - suggestions for moving forward.

  Hello

  Today, it seems it's your lucky day...
  Have looked into the Toshiba, basic knowledge about the Toshiba support home page and found this FAQ document:

  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  It should help you

• Update the Bios of satellite P10-304:-the size of the Rom file is incorrect

  P10 - 304 - downloaded Update Bios, but when I went to run it I get the message "the size of the.
  ROM file is incorrect. What can I do now?

  One question; Why you want to upgrade the BIOS?

  I studied on the knowledge base of the Toshiba site and found this:
  I always get an error message: the size of the ROM file is incorrect.
  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  It will be useful.

• Tecra A6 - update BIOS - "the size of the ROM file is incorrect.

  Hi, I was sent this link to download a new BIOS
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?id=60307&OSID=10&drive rLanguage = 42 & selectedLanguage = 13 & driverCountry = 41 & selectedCountry = 8

  But when I try to use set up, I get an error message that says: "the size of the ROM file is incorrect" and it doesn't let me move forward. How can I, please?

  Paul

  Hello

  Maybe this article can help you http://support.toshiba-tro.de/kb0/TSB59014X0000R01.htm

  Good bye

• Error: Size of the ROM file is incorrect, as the update of BIOS on satellite A200

  Dear Sirs,

  I tried to update my bios on satellite A200 and then I start the update it says "the size of the ROM file is incorrect.

  Can someone help me with this?

  What should I do?

  Hi Stavros

  I think I can help you.
  I remember this error message. Some of the users of the forum have posted a solution.

  For example here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=112057𛖹

  It seems that it s not a serious error is displayed because the BIOS file was not properly extracted.

  Good bye

• I have copy and paste files and folders, but the size of the destination memory is high compared to the memory of the source

  I copy and paste some files and folders in windows server 2003 for my external USB HDD, but the size of the destination memory is high compared to the source of the memory size

  Hello

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Use LR5. Because of volume and the size of the photos, I use an external hard drive. When opening LR5 it references only the local hard disk. How can I change the refernce to read the external drive. Thank you

  Use LR5, due to volume and the size of the photos, I use an external hard drive. LR refers only the Local Drive C not outside. Where do I change this by LR read the external drive. Grateful for the help.

  Thank you

  LR is not a file Explorer. He knows only the disks that you imported photos of.

  If you have previously imported these photos, then later moved into the external hard drive, go to the library files and "update location" Panel on the files that you moved.

  If you have never imported these images on the external hard drive, perform an import by using the option 'Add' (not ' copy') to keep the images on the external hard drive during import.

• Hard to find while coding source code - size of the cursor can be changed or rate of improved blink while in the cursor code view?

  On the retina Mac 5 k - work in Dreamweaver code - normal display mode. After you find the cursor in the code when editing source code. Is there a way to make the cursor itself more "BOLD", a different color, or change the visibility of markup/blink?

  Dreamweaver is not the settings for this.  But the fact of your operating system.

  To change the size of the cursor in Mac OS x:

  Choose Apple system, universal access preferences.

  In the mouse & Trackpad pane, use the slider at the bottom of the window to change the size of the cursor.

  Nancy O.