Error: Size of the ROM file is incorrect, as the update of BIOS on satellite A200

Dear Sirs,

I tried to update my bios on satellite A200 and then I start the update it says "the size of the ROM file is incorrect.

Can someone help me with this?

What should I do?

Advertisement

Hi Stavros

I think I can help you.
I remember this error message. Some of the users of the forum have posted a solution.

For example here:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=112057𛖹

It seems that it s not a serious error is displayed because the BIOS file was not properly extracted.

Good bye

Tags: Toshiba

Similar Questions

  • Where can I find the update of BIOS for Satellite A10?

    Hello

    Anyone know where I can download the "BIOS update" for Satellite A10?
    Please I really need.
    Thank you

    Hello!

    Sascha says you can find updates to the BIOS for this laptop and all other portable oldest in * archives *.
    All that s! :)

    But before you start the update you must close all running programs, also your antivirus and firewall. Disconnect the computer from the Internet and make sure that you are logged on as administrator.
    In addition, BIOS update should t be done just for fun, but only if you have problems with the laptop-online never touch a system running! ;)

    Good bye

  • Can not download the update of BIOS for Satellite M70

    Hello

    I have a question. I'll upload an update of the BIOS for my laptop, but the site for downloading I have to give the name and the password. I m registered but I can't open the download of the update.

    Can you help me?

    It seems that BIOS for M70 has been removed from the page of the driver and that's why you can not download or user, a password is required.
    You need to wait that Toshiba will publish it again.

  • Loss of power during the update of BIOS on Satellite A110

    During a BIOS update using WinPHlash power was interrupted and now my Tosh Satellite A110 is unresponsive.

    I think the BIOS is now corrupt or non-existent.
    I searched the net solutions and found nothing that works so far.

    I know that I'm a fool to try to Flash a bios under Windows but I did and now I need a cure.

    Thank you, in advance, to all those who responded to my call for assistance.

    Yes, you are right; the EPROM module was not properly flashed.
    In this case, the BIOS is corrupt and the laptop does not work.

    Solution: the EPROM module must be flashed once more use special disc of crisis of the BIOS.

    To perform this procedure to update the BIOS crisis, you need the BIOS (traditional version), BIOS crisis disk along with the step by step instructions.

    Unfortunately, this special BIOS crisis disk isn't available for download. It of available only for service technicians authorized.
    But I also read in various forums about successful re-flash BIOS.

    For example in this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=79257

    Check it out. Maybe it will help you. Otherwise, you will need to get in touch with partners in local service to Flash the BIOS again.

  • Where can I find an update of the BIOS for Satellite A200 - 14 d (PSAEC)

    Hello

    Where can I find an update of the BIOS for this model?
    My bios is 10/23/07 Windows Vista 32bits 1.80 - WIN

    Hello

    Have you checked the page European driver of Toshiba?
    Here you can find all the drivers and BIOS for Satellite A200 - 14 d (PSAEC)

    But I checked the page and 1.8 for Win 32-bit Vista BIOS is still the newest one.

    Looks like you're already up-to-date boyfriend ;)

  • Update the BIOS of the A110 to satellites--> the size of the ROM file is incorrect

    I tried upgraing BIOS download from Toshiba site but error message.
    The size of the ROM file is incorrect - suggestions for moving forward.

    Hello

    Today, it seems it's your lucky day...
    Have looked into the Toshiba, basic knowledge about the Toshiba support home page and found this FAQ document:

    http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

    It should help you

  • Update the Bios of satellite P10-304:-the size of the Rom file is incorrect

    P10 - 304 - downloaded Update Bios, but when I went to run it I get the message "the size of the.
    ROM file is incorrect. What can I do now?

    One question; Why you want to upgrade the BIOS?

    I studied on the knowledge base of the Toshiba site and found this:
    I always get an error message: the size of the ROM file is incorrect.
    http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

    It will be useful.

  • Tecra A6 - update BIOS - "the size of the ROM file is incorrect.

    Hi, I was sent this link to download a new BIOS
    http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?id=60307&OSID=10&drive rLanguage = 42 & selectedLanguage = 13 & driverCountry = 41 & selectedCountry = 8

    But when I try to use set up, I get an error message that says: "the size of the ROM file is incorrect" and it doesn't let me move forward. How can I, please?

    Paul

    Hello

    Maybe this article can help you http://support.toshiba-tro.de/kb0/TSB59014X0000R01.htm

    Good bye

  • Update BIOS Qosmio X 300 has failed - the size of the ROM file is incorrect

    Hello

    I use TEMPRO, and he suggested to update my BIOS.
    I downloaded the file and run the Setup file. Unfortunately, it says "the size of the ROM file is incorrect.

    This means I m doing wrong? or I have the latest BIOS in my system.

    Please advice.

    Thank you.

    Hello

    First of all I don't do everything what said Tempro!

    Secondly, this message was posted here in the forum several times and if you are looking for the size of the ROM file is incorrect, you would find that:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=120455
    and this, for example:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=73284

    The problem is that you have unzipped the Cabinet correctly!

    In any case, I think that it s not useless to put anything, if the laptop runs without problem!

  • Satellite A200 - 1BW PSAECE: update BIOS: size of Rom file is incorrect

    Hello
    I tried to update the bios from the Web site.
    But when I flash, it is said that "file size Rom is incorrect and does not update to the Bios.

    How can I sort this problem?

    First question:
    Why do you update the BIOS?

    The update of the BIOS is not necessary if the laptop works properly!

    But back to your problem.
    Found a solution and an answer why the error message: size of the Rom file is incorrect is displayed:

    Check this box:
    + I can't update my BIOS with the function BIOS Phoenix-file ZIP Windows XP Windows. +
    + I always receive following error message: the size of the ROM file is incorrect. +
    http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

    Good luck

  • An error occurred during the update the firmware. -16

    I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

    I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

    I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

    I'm not sure what is the problem...

    Your airport is now not working? That is, the reset did not work.

    OR

    It doesn't have to be upgraded after several attempts?

    The airport is connected to the network as usual? You have full internet access through the airport?

    What model is the most convenient airport?

    The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

    What is the current firmware?

    If it is a very old model, they can sometimes give wrong if it has never been updated.

  • 670 error when installing the update for silverlight KB2416427

    Original title: cannot install the update for silverlight KB2416427

    • 670 error cannot install the update for silverlight KB2416427

    Hi ithakiman,

    1. which version of the operating system?

    2. have you tried to install the update manually?

    First try to install the update manually and check.

    See the links to download the update below:

    http://www.Microsoft.com/Silverlight/

    Description of the update for Microsoft Silverlight: 28 September 2010

    http://support.Microsoft.com/kb/2416427

    Also you can post your question in the Silverlight forum for further assistance:

    http://forums.Silverlight.NET/forums/13.aspx

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • An error occurred during the update error checking new Code 80072EFE

    An error occurred during the update error checking new Code 80072EFE

    error 80072EFE infected by a root

    Launch tdsskiller to find any rootkids, download and run from here

    http://support.Kaspersky.com/downloads/utils/TDSSKiller.exe

    your computer will restart automatelly and start up. Then run the updates.

  • "800705B 3" error message on the update Intell-display Mobile Intel (R) 4 Series Express Chipset Family

    "800705B 3" error message on the update Intell-display Mobile Intel (R) 4 Series Express Chipset Family CAN YOU HELP ME?

    Windows Vista

    Hi, Terry,

    What version of Windows are you using?

    Open the Device Manager

    Start > right click on computer

    Select manage

    Select Device Manager

    Click on the + sign next to display adapters

    Right-click on the chipset driver, then select Properties

    Select the driver tab

    Select Restore

    If the rollback option is dimmed, select uninstall

    Back to zero computer and Windows will reinstall driver

    Go here and use the update utility driver Intel

    https://Downloadcenter.Intel.com/default.aspx

  • I have CS5.  Cannot install updates.  The update process runs, but once finished, I get an error message that the update could not be installed.  I have a Dell PC with 8 GB ram and 2 TB of storage.

    I have CS5.  Cannot install updates.  The update process runs, but once finished, I get an error message that the update could not be installed.  I have a Dell PC with 8 GB ram and 2 TB of storage.

    The latetest (cloud) update sometimes does not work with old programs... Try to install your updates manually

    Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

Maybe you are looking for

  • Satellite Pro P200: Cannot install Server 2003 - parity memory error

    I have a Satellite Pro P200 and to the work required to install Windows 2003 server on it, but all I get is an error message: -Hardware malfunction Call your provider of support material NMI: Parity check / memory parity error -The system is shut dow

  • 5 s screen white iPhone?

    Hi all (32 gb, iPhone 5 s after the warranty, protected with Mophie juice more, intact screen, OS update status unknown) Was checking my emails as always when I clicked through an Amazon site it seem'd to fight a small display of an image from the br

  • Sony Walkman NWZ-E345BLK Media Player Black

    I downloaded the music my before mp3 with windows media. He did very well, and then my computer crashed and we had to do a system recovery. Now, it does not recognize my drive is connected, but he acknowledges that everyone in the household. What sho

  • Epson r320 printer driver

    Information on the site, is this printer driver to use on the Win7 installation disc. The updated driver does not work according to the best information. It is not installed when you try to use the printer, the error message says this printer driver

  • Percentage of system restore does not reset to zero

    I just built a PC W-7 with a SSD system drive and a hard drive for data.  At the end I was tired and selected the wrong drive (the hard drive) in 'System Protection '.  When I noticed my error, I set the SSD system ("restore system settings AND previ


HashFlare