Capacity to print to PDF after upgrade the drive

Similar Questions

• The computer does not see the printer (4200 Officetjet) after downloading the driver full features

  Officetjet 4215xi, Windows 7-64.

  Try to use the original HP CD-ROM driver was unsuccessfil, message telling him did not meet the requirements.  Then, I chose to install the driver directly from Windows 7.

  After installing that shows to be successful (the impressions of the printer), I wanted to get the center of HP solutions on the computer and I downsloaded the driver, choose Officetjet 4210 (4215 wasn't a choice available).

  It seems that the installation has been done, there is an icon on the desktop but when clincking it says that the printer is not connected.

  I unplug the USB cable, restart the computer and replugged the USB at the back of the printer.  No results.

  How can I work around this problem.  Thanks in advance.

  Hello

  The HP Officejet 4615xy is no longer included with the full functionality of feature for Windows 7.

  Any driver you may have used is not intended for your printer and not detect...

  You can find the information for your printer below:

  http://support.HP.com/us-en/document/c01796879

  I'm afraid that plenty of advanced features as the HP solution Center is not available for the operating system...

  Shlomi

• Lexmark Z705 not print appropriate color, after installing the driver, error message "Missing entry: ExportOEMDefaults.

  In Vista Home Premium:

  WORD mail MERGE print addresses only in red.

  MUSTEK BearPaw scans and prints only black print in red.

  The latest Vista updates have been removed and a reported error: error in C:\Windows\system32\NVCPL.ddl

  Entry: ExportOEMDefaults

  The latest Lexmark Z705 driver has been loaded.

  http://www.Vistax64.com/Vista-General/120998-c-Windows-System32-nvcpl-DLL.html

  Read the above about your mistake.

  It's to do with the graphics drivers from NVIDIA.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L650d-120 does not load after upgrading the BIOS 1.7

  After upgrading the Bios up to 1.70 my laptop is no charging current, but always works to the AC adapter.
  Can I do something on my own?

  Hello

  First of all, you should set the BIOS to default settings and need to save the changes.
  You must also leave the AC adapter plugged into the laptop for a longer period of time.

  Welcome them

• After upgrading the bios to version 2.13 t430u, it freezes at black screen

  Hi all

  After upgrading my lenovo T430u bios to version 2.13 it freezes at a black screen, and windows does not load. My machine has windows 7 Professional and the only way to make it work is to reset the bios settings, but after awhile, it freezes at black screen and windows 7 does not load again and need to reset the settings of the bios once more. Hope someone of you gyus can help me with this since is very frustrating.

  Lenovo has released a BIOS updated for ThinkPad T430u that resolves customer reports of black screen after upgrading the BIOS.

  CHANGES IN THIS VERSION

  Version 2.15

  [Problem resolves]

  -Fixed a problem with the black screen after BIOS update

  -Fixed a problem with the gray screen when turn off Bluetooth in the BIOS Setup

  V2.15 BIOS can be downloaded here: http://support.lenovo.com/us/en/downloads/ds031724

  Thank you

• Bluetooth not available after upgrading the BIOS on HP g62-a60EM

  After upgrading the BIOS, I can't use bluetooth, as I can't see it in Device Manager. I've updated the BIOS with the file sp55430 on the support site. Battery is not holding a charge, it runs out after about 30 minutes. Back BONE back then now, I can use bluetooth. My OS is Windows 7 Professional 64 - bit - Slovenian.

  If anyone can help?

  Kind regards

  Dragan

  Hello

  Try to update the BIOS again. After that make sure that the wireless and Bluetooth lights is lit. Also download and installed the drivers of bluetooth and verification.

  After the BIOS also check in BIOS if Bluetooth is turned on:

  Menu of the System Configuration > Integrated device options > Enable/disable integrated Bluetooth Radio device
  

• I can't print the pdf files of Adobe reader 9.5.5, instead, it prints to file.creating a NDS. I can print individual pdf pages from the same document usung photo shop elements 4, but it is laborious. Help, please.

  I want to print a document that contains 20 pages. I can print individual pdf pages from the same document usung photo shop elements 4, but it is laborious. Help, please. I've updated the Adobe reader to the latest version. This fault is developed when I was at Midway through a series of 20 pages of printing documents.

  In the Advanced Print dialog box disable the entry "print to file".

• Cannot install recovery image on my Equium after upgrade HARD drive

  Hello

  I just installed a new hard drive for my Toshiba laptop Equium I contacted Toshiba who informed me that I could mount up to 1 TB, I opted for with a 500 GB at halfway.
  After installing the drive I inserted the disc of recovery after a while, it was loaded with the operation completed successfully message. Next message put in place windows could not configure windows to run on this computer hardware. Then windows could not complete the installation to install windows on installation, this restart of the computer...

  At the end of the restore process a message tells me to remove the recovery disc and output as soon as I get the laptop stops and doesn t re boot automatically. During the next restart windows message Vista starts for the first time then the cycle starts again. I tried to reload several times recovery according to the instructions, but not good.

  Any help much appreciated

  I put t know which model of laptop you have, but if the recovery image is Vista, it must be quite old model, maybe Equium A200.
  To be honest I didn't experiment with the upgrade of the HARD drive on older models, but I can imagine the image recovery are a problems with hard drives with huge capacities.

  Display please model name and which HDD you inside now.
  By the way: if possible, try to install Win7 using Microsoft installation disc. I m it will be safe works without any problem.

• How to upgrade the driver for my video card?

  How to upgrade the driver for my video card?

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• hpc309a will not print in color. black printing after upgrading the operating system

  Issue began immediately after the upgrade to mac Snow Leopard 10.6.8. Yes, the cartridges are fine. I downloaded the latest drivers and firmware. I chose the best and high quality paper during printing. Still nothing.

  OK, so the printer is at fault.  First of all, try to clean the holes in the cartridge by following the instructions on this page: http://support.hp.com/us-en/document/c02253171

  If this doesn't work, remove all the cartridges, and then lift the latch on the right side of the cart and remove the print head Assembly.  Clean the electric contacts with a damp cloth not fluffy (the fabric will be ruined with ink), then rub the surface of contact on the cart.

  Reinstall and start over.

• Photosmart 6520 does not print after upgrading the firmware on the router.

  I have problems with my router and a remote technician for Verizon FIOS updated firmware, solve my problem of the internet, but now my printer is not working.  When I try to print from my macbook pro (OSX Lion 10.7.5) it is said that the printer is idle.  When I try to print from my ipod and the iphone, it is said that it prints, but then nothing happens.

  I was able to set up direct wireless to print, but I don't want to go into the settings and change networks whenever I need to print.

  I tried to turn off the router unplug the printer and turn it back on.

  I checked to make sure that the WEP code and network name are correct.

  What can I do else?

  treeBear wrote:
  

  ricksmom wrote:
  

  I appreciate really all the efforts that you and other posters are on this issue, but I feel that I will not find a solution.  Maybe a new router?

  It is a long shot. But since we are short of ideas, please try to change the configuration of the router from WEP to WPA2 and try again to establish the connection. Because WEP is very old standard, some routers may have a few inherited defects that were never resolved.

  Well... This opens a huge can of worms, it leads eventually to a solution.  I changed the security settings and when I presented to them, 'wait while we apply the settings' screen appeared and never went away.  The timer kept spinning and this went on for over an hour.  Neither the old or new passwords worked and I completely lost my internet connection.  I called Verizon and ordered a new router and said the technician on the line of my being stuck in limbo. After a few basic tests (unplug and pluggng again) she transferred me to someone in the advanced group.  To make a long story short, he traced the fault not the router, but the optical network outside my home box.  It reset, reset the router (losing the new security settings and everything else) but my internet is back, and fortunately, so is my printer.  I'll live with that until the arrival of my new router state-of-the-art.

  Thanks for the suggestion, it was a frustrating experience, it finally lead me to a printer to work! I doubt that I would come to this point another way.

• OfficeJet Pro 8600 D949CA: Scan of Cant to PDF after upgrade Mac Sierra 10.12

  Just upgraded to mac Sierra 10.12 and now scan to PDF to the computer does not

  error: "a required software component is missing or damaged. Please reinstall the software for your device and/or check your hard drive for problems. »

  Then I downloaded the latest version of the driver, but when I click on HP Utility & Scan to computer it gives error

  "Software required for the scan of the computer could not be located on this computer.

  simple scan software can not find him as either

  but disk utility works insofar as I can print on printer

  Summary:

  I installed the latest driver after upgrade to Mac0s 10.12 Sierra

  I can not scan to PDF & send to the computer

  Feature product number: CM749A

  Name of device model: HP Officejet Pro 8600 N911a

  Device serial number: CN34SBXG0H05KC

  Mac OS version: 10.11

  Service ID: 23226

  Hi @orangecowboy,

  Thank you for reaching out to the forums! I understand that you have problems of digitalization in PDF format for the Mac since the upgrade to the Sierra. I'd love to help you.

  Try the following steps to see if they will solve this problem: Scan network connection is lost (Mac).

  You have the option to allow the scan to computer?

  I have provided a few steps to manually remove all the old software of the printer and reinstall the latest drivers again if you still have problems.

  Here are the steps: Uninstall HP Printer (Mac) software.

  Move the files or folders to the Recycle Bin, drag and drop.

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, HP IO and trap of HP monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * all files beginning with HP or HP.
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.

  Restart the Mac.

  Empty the trash.

  Once connected, repair disk permissions.

  1. On the Dock, click Applications, then utilities.
  2. Double-click disk utility.
  3. Highlight your hard drive / partition on the left (by default this is "Macintosh HD").
  4. Click repair disk permissions at the bottom of the window.
  5. Once the repairs completed, restart the computer.
  6. Restart the computer.

  Install the latest version of the software: HP Easy Start.

  If the problem is resolved and that you appreciate my help, please click on the button "Accept as Solution" and the "Thumbs Up". Let me know how make you out. See you soon!

• All-in-one HP OfficeJet 6100: cannot scan multiple pages to a PDF after upgrade to windows 10

  I used to use Hexonic software ScantoPDF to scan multiple pages and save in a single PDF document. After the upgrade that software no longer works, even after I re-installed.

  I searched for another free application and safe to use to scan documents to PDF format since HP has no software of the printer to the HP officejet 6100 and two scan Windows 10 applications are primitive (it doesn't have an output PDF option, and the other Scan, only lets you scan a page in a document.

  Help! Can someone please provide a free software application that will allow me to scan multiple pages in a document?

  Thank you.

  Hello

  Try to use NAPS2 which is a freeware software and allow the digitization of several PDF files:

  http://www.naps2.com

  Hope that helps,

  Shlomi

• HP Photosmart B110a: HP Photosmart B110a cannot print via wifi after upgraded to windows 10 notebook

  Before I updated to windows 10,

  I can print via wifi.

  But now I can't.

  the error says that there is some connection problems.

  But I could not understand what is wrong.

  We need to make a configuration under windows 10?

  Thank you

  Hi ma1210,

  Given that this problem occurred after the upgrade to Windows 10 I think your best option would be to uninstall the printer driver and reinstall Windows 10 drivers for the printer. You can download Windows 10 drivers for this printer by going to HP support at www.support.hp.com site - then enter your product information IE HP Photosmart B110a... change the Windows 10 operating system, download the driver and install it. According to me, which should solve the problem. All the best...

• Smart printing toolbar went after upgrade

  HI -.

  I received an alert on Smart Print update.  After the upgrade, the toolbar has disappeared.

  I need to download and reinstall the software?

  Thank you
  Jay

  Hello Zen-

  Thanks for your reply.

  Allow the tools did not work.  I had to reinstall the software to do the job of the toolbar.

  It is the second time that this is happening to me.  It happened a month ago.  According to me, what happens after you have installed the HP software upgrades.

  Thank you
  Jay Muthukamatchi