The computer does not see the printer (4200 Officetjet) after downloading the driver full features

Similar Questions

• my computer does not "see" my printer

  I used my computer dell laptop with XP and my HP470 mobile printer for a year.  All of a sudden, it just connect and my printer... or vice versa.  It says that my printer is not connected.  I need to know how to solve this problem.

  I used my computer dell laptop with XP and my HP470 mobile printer for a year.  All of a sudden, it just connect and my printer... or vice versa.  It says that my printer is not connected.  I need to know how to solve this problem.

  The HP OfficeJet 470 portable printer can be connected to your computer by wifi (1), (2) Bluetooth or USB cable (3).  Who do you use?

  If you tell me how you want to connect the printer to the computer, I'll read the manual and give directions.  If you just want you read the manual and skip the intermediaries, go here:http://h10032.www1.hp.com/ctg/Manual/c01272430.pdf

  If you use the wifi (no Bluetooth), you have a wireless router or just connect to the printer in "ad hoc" mode (it would be more frequent if you use the printer in a hotel room, for example)?

  You share the printer with multiple computers on your local network?

  You will probably need to print the following pages:

  Diagnostic printer page: press and hold the Power button and press the "resume" button (down arrow, secondly the left button) 4 times

  The printer configuration page: press and hold the Power button and press the button "cancel" (X, most left button) 4 times.

  Configuration page of the WiFi and Bluetooth: press and hold the Power button and press the 'Cancel' button 2 times, and then press the "resume" button 7 times [I guess HP really wants to make sure that you don't do that by chance!]

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  If I shut down the computer and plug... he sees the thing then turned back...
  I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.
  any thoughts?

  Hi KK Waddell.

  Thanks for posting in the Microsoft Community.

  I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  I suggest you to see the links and check.

  USB port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  One or more USB devices may not work when you start your Windows XP-based computer

  http://support.Microsoft.com/?kbid=885624

  See also:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

• Saitek cyborg keyboard does not work in Windows 7, even after downloading the drivers

  Saitek cyborg keyboard does not work in Windows 7, even after downloading the drivers. It says error tent install drivers try again.

  (a) has been the work of keyboard much earlier?

  http://support.Microsoft.com/kb/258826

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

• ENVY 4520: Computer does not see section scanner WANT

  Last weekend, I bought a 4520 want TO replace a malfunctioning Lexmark all in one. I quickly learned that the software for this printer avaulable was not available for Mac OS X 10.7.5 (Lion). However, I followed the instructions on the Apple and this site and downloaded the appropriate drivers for the 4500 series. I am able to print wireless from my Mac, but when I attempy yo scan, the 4520 does not appear. In fact, printing and control panel Scan sees not the 4520 otherwise than as a printer no scan option available. Utility HP 'sees' the fevice but offers no adjustment of parameters. The application of scanning HP, does not see it no more.

  While printing is the main reason I bought this unit, the scan function is also valuable and I would like to be able to use it. Of course the current HP software does not support my Mac and OS (Lion) - are there any ear; first versions of installation scanning software partitions. If not, do you have suggestions for () maybe) generic software that will allow me to use the scanner?

  -colin

  Hi Colin,

  Sorry for the frustration you must be feeling.  I did some checking and confirmed that HP only provides drivers scan of your product on OS X 10.8 and later versions.  This product also supports the Apple AirPrint (scan) functionality, which allows you to scan without HP software, but still this support is only available on OS X 10.10 and later versions.

  I am not familiar with the features of 3rd party scan applications.  My only suggestion would be to consider upgrading the version of the OS on your Mac (if possible) because this opens up your options considerably.

• OfficeJet 7410xi: computer does not have USB printer after upgrade to window 10

  The computer does not find the USB connected printer (Officejet 7410xi) after having modernized the window system 10.

  Hello

  Download and install the following software:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  During SOUTH clck the link (4th one) software selection step and uncheck the Bing toolbar due to incompatibility issues with MS Edge, then continue with the installation of you

  Please let me know the results,

  Shlomi

• Mac does not see my printer "J611a"?

  Hello

  I have connected my printer to my router (it shows the name of the correct router if I run a config report), but does not see the printer on my Mac (when it is wireless).  Everything works fine if I connect to my Mac with a USB port.

  Any advice would be greatly appreciated.

  Thank you.  Stuart.

  Hi SRJC

  I understand that you cannot set up the printer on the wireless network.

  For me looks that you connect the USB cable from the printer to the router. Generally this method will not work.

  You need to configure the wireless through the printing software and add the printer on Mac.

  Given that the printer works via the USB on the Mac already then you can follow these steps:

  1. Click OK in the Menu bar above and then click Applications .

• After moving my desktop of my computer does not see the network

  cable tested good, replaced by the new network card it works, actually clicked on the computers in the workgroup to see last week and it worked now missing again... can get online another fine two computers agree, but can not see me

  Hello

  If your router not booking IP use.

  Otherwise, configure the computers with static IP addresses.

  http://www.howtogeek.com/HOWTO/19249/how-to-assign-a-static-IP-address-in-XP-Vista-or-Windows-7/

  Then go to sharing and permissions.

  Maybe this can help.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

• computer does not see the cd

  drivers are coming in saying is not a problem in Device Manager, even if I uninstalled and reinstalled, has not worked, cleaned, did not work, reinstalled the codecs, did not work, tried other blank discs of the cd DVD etc to see if it's just this one it see blank discs nothing else even though I knew than before it used to work , I tried several different things where copy you and paste into Notepad and merge with regestry, did not work, bought a program that says it would fix problem does not want to buy it, but he says he'll fix it and! It did not work, I tried to come here to talk with someone that they wouldn't take my pid number probably a scam to make me pay to talk to someone but no guarantee that it will work, so here I am if someone can help me please! my daughter needs it for school work and I'll hunt mad ends.

  Hello

  Often these type issues are caused by having too many CD/DVD programs, who are responsible for parts
  themselves into memory at startup, even if does not they will compete with each
  other resources.

  ----------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP250G4 (M9S81EA): the laptop computer does not see the usb cable

  Hello, have a problem with HP250G4 (M9S81EA), doesn't want to install cable diagnostics. After you install the cable drivers, win10-64 cannot define it. All the drivers are installed on your laptop and work properly. The cable is the same worker checked on another laptop. None of the Google tips help not hurt for 3 days with this problem. I hope for your help.

  USB device not recognized
  Works Yusb last device connected to your computer, and windows cannot identify him.

  The request failed usb device descriptor

  I installed on this laptop Win 7.8.10 and the unit still does not work, I think it's a hardware problem of the laptop. But at the same time, other usb devices are working properly on...

  < feature name = 'Application' type = 'Description' sequence-id = "3" >
  < attribute name = "a0" value = "HPAdvSysDiag_USBPort" / >
  < attribute name = "a1" value="5.9.0.0"/ >
  < attribute name = "a2" value = "2" / >
  < attribute name = "p1" value = "09/11/2015" / >
  < attribute name = "p2" value = "F.1A" / >
  < attribute name = 'p3' value = "96.39" / >
  < attribute name = "p5" value = "" / >
  < attribute name = "p15" value = "2" / >
  < attribute name = "p16" value = "0" / >
  < attribute name = "p17" value = "0" / >
  < attribute name = "p20" value = "00000001" / >
  < attribute name = "p4" value = "1" / >
  < attribute name = "p0" value = "2015-12-26 22:45:56" / >
  < attribute name = "p10" value = "0" / >
  < attribute name = "d15" value = "F3" / >
  < attribute name = "a4" value="00.00.00.34"/ >
  < attribute name = "d0" value = "3" / >
  < attribute name = "z0" value = "94L7PW-7R07T8-XD7WMF - 8 d" 7403 "/ >
  < attribute name = "e0" value = "434" / >

  Help someone or not?

• My Windows Vista computer does not see the network or printers that are connected to a computer using Windows XP

  before that norton was installed, it worked, but since Norton was installed AND DELETED, Vista will not see XP or its printers.

  I have checked the firewall and they took two computers, but still no luck.

  Hello

  Did you change your computer?

  This problem occurs if the (LLTD) link layer topology discovery Responder component is not installed on the Windows XP computer.

  Network card in Windows Vista makes network diagrams of connections between network devices that can be used to troubleshoot connectivity issues. Network map uses a discovery protocol called Link-Layer Topology LLTD (Discovery) that queries other devices on the network to determine how the network is organized.

  Windows Vista includes the software components that implement the LLTD protocol. For other devices on the network to display on the map, they must activate a discovery protocol that can meet the demands of mapping from the Windows Vista-based computer.

  I suggest you to install the update on windows XP.

  http://www.Microsoft.com/download/en/details.aspx?amp;amp;amp;displaylang=en&ID=5577

  This reference so

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

• My computer does not recognize my printer installed as a scanner.

  Recognize a scanner.  My printer is also a scanner.  My new computer recognize the printer (in a network), but does not recognize the scanner function.  When I try to scan a document it tells me that I don't have a scanner installed?  What should do?

  Normally, the input devices can be shared, at all, but this is not always true of scanners.  You will be able to share the scanner if the manufacturer has provided a software specialized for this purpose.

  You must use a network scanner (which eliminates immediately most, if not all, USB scanners) and a specialized software (that comes with the scanner) to do this.  If you're talking about a consumer grade flat USB or parallel port scanner, you can most likely not.

  HP, Canon, Xerox, Oce, Kyocera Mita and other companies manufacture network capable scanners (they devices actually multi-function was also copying, printing and sometimes fax and e-mail) and specialized software accessories.  The cost of these devices usually begins somewhere just below $4, 000.00 USD.

  The application of HP PrecisionScan Pro, version 2.03 and higher, normally provided with some low business scanners from HP range, allows some of the functions of the sweep to share.  See the documentation provided with the scanner.  (I know that it works, if not very well; I configured HP ScanJet 6300 C and C 7490 devices to be shared, using the provided software.)

• Applications for blackBerry Smartphones does not open on Blackberry Bold 9780 after download of Blackberry App World

  My applications are not open on Blackberry Bold 9780 after their download of Blackberry App World.  They complete the download, they are free applications.  When I press the button to open the application, it does absolutely NOTHING.  I don't know what else to do, so I have remove off the 9780.  Please help me! -Jennifer

  I guess what I'm confused about this... is if we are going to solve all the apps that does not open, and now you have removed people... How shall we proceed?

  Who is?

  Let me to this Counsellor... Once you have downloaded an app from AppWorld, even if you are not invited to do, once the app is installed, make a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart.

• Router sees Officejet 6700 computer Win7 sees the router computer does not see printer

  All-in-one printer, HP Officejet 6700 sees Motorola Netopia DSL router model 2247-N8 (and vice versa). (The printer takes a valid IP address via DHCP on the appropriate wireless network and the router is able to ping the printer and sees the printer as a device on the wireless local area network). The computer Dell Studio XPS 9100 years under Windows 7 Home Premium sees the router and is able to surf on the web. The computer cannot see the printer, by rattling through or printing software HP and doctor Scan. I don't know where I have to turn at this point. Direction and/or messages, please? Thank you.

  Oh, geez, too bad, I feel on this great * holds the thumb and forefinger about a half inch apart *.

  Anyone else having this problem, please be sure that in your router under wireless security settings, that you not block fill wireless. I thought (Yes, right!) that what is called simply toggling of bridges for the scope, but with this router wireless at least, it blocks all traffic between wireless clients. In this case, it was blocking traffic between the client and the client computer wireless printer wireless.