CAPS LOCK IS FLASHING * STOP * AND MY MONITOR IS NOT WORKING

Similar Questions

• Satellite A660 - touch pad / stop and other buttons do not work

  Dear people on this forum,

  Recently, about 3 weeks ago, I turned on my computer and I cleaned out the dust because it was overheating.

  about 2 weeks before, I noticed that my touchpad is not working and the buttons at the top of the page do not work, there is no light (multimedia audio buttons wireless) I can't activate/deactivate or either, I don't know how. I don't know if the problem because I cleaned my laptop and has not logged a few threads back but I included this detail because I do not use these buttons if I haven't noticed if they were on. but he said: 2 days ago, I don't know how my wireless exploded Ant when I press fn + f8 (wireless) wireless communication switch is turned off, which is one of the buttons is not working (upstairs next to / switch even with my touch pad)

  I tried the following:

  Windows Update
  turn off the computer, remove all cables and battery and wait for about 30 minutes. Then then hold down the button for 30 seconds
  Reinstall the support flash cards, hw Setup utility / value pack
  and finally a Toshiba out of the recovery of the box using the recovery of 2 cd product

  I don't know what to do next. It's either:

  try something else
  or is there a wire is connected both touchpad and the buttons at the top and I have to open my laptop and connect them.

  Please answer as to my next step to get my wireless.

  Your dear member of the forums, kaujis

  Post edited by: kaujis

  Please don t get me wrong, but I don t know how to help you now. Disassembly of the laptop is to only authorized persons and if you do it on your own there is always a risk that something may be hurt or may be damaged.

  OK, I must also say that I also removed my machine too but I got lucky and everything is OK as before.
  I put t know how A660 looks inside, but the principle is still the same and I can't imagine you have whatever it is damaged.
  You know very well that we cannot say much about your problem. What you need to do now is the final test of functionality and install original recovery image that you got with your laptop. Test the functionality with the factory settings. If the problem is still there, I m afraid you must open for new laptop and check if everything is connected correctly.

  Last option is to contact the service and ask for help.

• Now this Digital Locker service is gone and my backup CD not working anymore... Now what?

  If its great that Microsoft went to the microsoft store option. What should I do now that the Digital Locker service is gone and my backup CD is now damaged for some reason any. I'm logged into the bank account and none of my ancient history is saved in the system. I need to re download vista and I have my CD recorded before the closed Digital Locker service keys that's not the problem. But where should I go to re DOWNLOAD vista? Why service Digital Locker was closed first place, it worked very well? It's annoying and no, I won't pay Microsoft for another copy of vista that I bought in 07. You guys need to take care of your users of the customers Mac before all become.

  Look for the following link: how to replace Microsoft software or hardware, order service packs and upgrades and replace manuals product http://support.microsoft.com/kb/326246 thanks and regards, Amit Mehta: * e-mail address is removed from the privacy *.

• Stop and restart buttons do not work

  There are about 3 weeks and co - either by the way, after installing some Windows updates, I could not long to shut down my computer or activate the restart function by clicking on closing down or restart buttons. The Hibernate button works.

  It is not related to firefox.

  You have any specific questions with the mozilla products?

• wireless adapter is gone and the extension display not working after hibernation

  my laptop is a thinkpad X201s, os is windows 7, 32 bit, ultimate, English

  I used wireless home and my laptop is discharged, it is put into hibernation automatically

  the next day, I went to the office, plug power adapter and turn on the computer

  then I found wireless does not work, so I opened 'Control network and Internet\Network connections', there is no wireless icon. then I open "Device Manager", there is no wireless network adapter in network adapters

  and another bad thing is when I extend my screen with another monitor, the second screen shows nothing and the monitor does not work, it does not work in another computer, it seems necessary to fix. but it works before

  and I change a new monitor to connect my laptop display of the extension does not work, but the monitor can work in another computer, that's fine.

  and I restarted computer, no help.

  Finally I found the solution for wireless, first computer shutdown and plug-out the power adapter (it is very important), wait 30 seconds, then plug power adapter and restart the computer, wireless, great work

  now, the extension display function still does not work. I guess that the display extension PIN does not work, maybe need repaired

  Hi Jacky,.

  First of all we apologise for the late reply,
   
  As seems to be problems with the extension display port, I suggest you to contact the manufacturer of the computer.
  http://support.Lenovo.com/en_IN/feedback/contactsupport.page
   
  Please come back incase of any queries.
  Thank you
  Jayant.

• Caps Lock Code flashing

  What is the caps lock light flashes four times then stopping average. I have a HP Pavilion UD7-1243d. The computer will not continue to start and the screen remains black. I only tried a hard reset at this point.

  Thank you

  It seems that GPU

  LED flashes 4 times

  Graphics

  Non-functional graphics controller

  You can try a reset adifficiles - remove the battery and AC adptor - hold power for 20 seconds - release and then reinsert the battery and AC and try again.

  Here is the list of blink codes

  http://support.HP.com/us-en/document/c01443366

• Windows 7 home first OA: start of the laptop but I have a black screen, but the caps lock button led on and outside

  Dear anyone!

  I need a help of deperate. I have a Windows 7 first OA type HP laptop at home that he is the specification that I have.

  I would write what happened. I always before I close my laptop I chose the tab.and of sleep when I open again is to start automatically, but somethimes I do the Start button. So my problem started when I did my usual close choose the sleep tab and he's fine, leater but10 to 15 minutes, I forgot something and I wanted up, after the start I heard my lap top speed and good early but the screen is pitch black, no company logo and nothing! I've noticed that only a seeing of CAPS LOCK button is on and outside. My question is what is the problem, I hope that no Virus! Or I had to close something? How can I start my lap top once again? Help, please!

  sincerely

  Zoltan

  Try a hard reset:

  http://support.HP.com/us-en/document/c01684768

• Caps lock seeing abruptly stopped visible on-screen. How can I get that back

  Caps lock seeing abruptly stopped visible on-screen.  How can I get that back

  Windows is not a caps lock indicator.  The indicator on the screen is provided by another program, provided by the manufacturer of your computer.  Computers Dell, for example, have a program called QuickSet which performs this function.  Other computers, such as eMachines, use a program called HotKey that is running in the taskbar near the clock.

  If it stop working, the program may have been closed (or maybe even turned off by someone else). A great troubleshooting step is simply restart your computer.  As long as the program is still installed, it must itself automatically restart (assuming nobody has disabled it).

• I'm using a MAC with the current software. I am trying to download Adobe Flash Player. My password does not work. I ' v reset my password and restarted my computer. I need help with my password at the bottom of load.

  I'm on a MAC and my password does not work, I reset my password and I can not even download Adobe Flash Player.

  This password is presented by your operating system and is designed to prevent you from accidentally installing the software.

  If it comes to your personal computer and you don't need a password to connect to the computer when it first starts, you can probably leave the password blank and click OK to go to this prompt.  If it comes to your personal computer and your normal password does not work, make sure that CAPS LOCK SHIFT is off, and then type the password carefully.

  If this is your work machine and he asks an administrator password, well, you will need to have a conversation with your computer friendly.

  If you are still puzzled, you may need to reset the password on your Mac:

  http://support.Apple.com/kb/PH18653

  http://support.Apple.com/kb/PH14325

  http://support.Apple.com/en-us/HT201240

• The plus sign next to my tab stopped working: when I click on it nothing happens. I tried uninstalling and reinstalling and it still does not work.

  The sign + to add a new tab has suddenly stopped to work earlier. I tried uninstalling and reinstalling and it still does not work. What can happen and how to fix it?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• I don't know how i ' v, but I lost the toolbars at the top and bottom. [Alt] will not bring up the toolbar and scroll keys do not work. How can I fix it?

  I managed to hide the toolbars, ALL of them. [Alt] brings to the top of the toolbar so that I can change them. In addition, the [previous page] [next page], [home] and [end] keys do not work.

  You can have:

  1. Choose the Mode "full screen" or
  2. unchecked toolbars

  The F11 key activates / turns off Mode full screen or not. Full screen, you have no toolbars, no tab and no bar Add on (bottom).

  • See-> http://kb.mozillazine.org/Netbooks#Full_screen

  If unchecked you your toolbars (checked = displayed; UN - check = not displayed), and then do one of the following, then click on those you want to check/uncheck:

  • Right-click in the empty space at the end of the tab bar
  • Press the ALT key or the F10, the poster Menu bar, click View > toolbars
  • Firefox button > Options
  • Hold down the ALT key and type the letters of the keyboard V T
  • See-> https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing
  • Also see-> https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
  • Also see-> http://kb.mozillazine.org/Toolbar_customization

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Satellite L350 - key FN and F9 touchpad does not work

  Hello

  I have a toshiba Satellite L350 with Vista 32 bit and my problem does NOT work FN keys.
  I installed already Synoptics Touch Pad V6.3 from Toshiba Web site, but it did not help.

  I searched for other software mentioned on this forum, but I could not find.

  The biggest problem is that my touchpad is locked, and fact without work FN + F9

  Use me keyboard just - what is difficult and annoying :(
  I'd be really greatefull if anyone can help me :(

  Hugs,
  Kate

  I agree with Akuma
  You need the PPV for the FN keys work.

  PS; If you want to use the Toshiba OS preinstalled, so everything should work properly!

• Satellite U500 - 1 8 - eco and touchpad button do not work

  I had to update my Windows 7 Profesional version and now I have some problems:

  1. I installed eco utility but when I press the single button of co control nothing happends
  2 start/stop pad touch button does not work (not as important)
  3. when I press the fn button context menu? (the bar at the top of the screen with shortcut explanation)

  I looked on the toshiba site, but can not find good files someone help me?

  Thanks in advance

  Hello

  In my opinion, you must reinstall Toshiba Value added Package and the Eco utility. All utilities, you can get on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  So I agree with the user above the reinstallation of this tools, everything should work properly again.

• I just 6 s phone and when I try to buy stuff, it says "enter a password for santosjim@***". It's not my apple ID and my password does not work

  I just 6 s phone and when I try to buy stuff, it says "enter a password for santosjim@***". It's not my apple ID and my password does not work

  The phone that you have just bought is not new. It is locked to its previous owner.

• Primary monitor does not work after last nights updated

  • I'm running Ultimate.
  • I have two monitors.
  • My primary monitor does not work.
  • I checked the VGA cables. This isn't the issue.
  • Edit: Just realized that my main monitor is a monitor "Westinghouse". -Who is a "Plug-in-and-play" monitor, there are no drivers.
  • Reinstalled the ATI drivers, did nothing.
  • SYSTEM RESTORED, still nothing.

  I ran the most recent update for final last night, then fell asleep. Everything worked before that date, but when I went to turn on my computer this morning, only my HP [my second monitor.] w17e worked. He said he was installing updates from last night, so I had no problem with him and thought it might show something once like this on the login screen.

  Once that has happened to the login screen, it showed it for a fraction of a second before disappearing. I entered my password and it connected as usual. After login, I turned off my monitor, and then back on, and it showed my normal desktop for a moment, [enough for me to close two-three programs] before she returned empty.

  Hello
   
  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest that you please check how to set up two monitors and frequently asked questions on how to set up multiple monitors in Windows 7 from Microsoft mentioned below, items

  ·    Setting up dual monitor is easy in Windows 7 http://support.microsoft.com/kb/976064
   
  ·    Multiple monitors: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/Multiple-monitors-frequently-asked-questions
   
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.