Captivate 5 - extremely slow reaction of the system for all actions

Similar Questions

• Best practices for storing the Logs of the system for all newly improved ESXi hosts?

  Hi people,

  What are the options and best practices for the Logs of the system for all newly improved 5.1u1 ESXi hosts?

  Do I need to have the Syslog server or it can be safely ignored?

  Thank you

  Evening,

  Syslog is preferred, but VMware has provided a collector of syslog on the vcenter installation disc can be installed on any windows host or your vcenter. I can't count the number of times where I had guests CMTF or newspapers lost... Fortunately for the syslog which collects up to the accident.  It is not necessary, but it's really a good idea without any real cost since you can use your vcenter host.

  Here is an article on how to install it:

  Set up Syslog ESXi collector | VMware vSphere Blog - VMware Blogs

  Thank you

• Portable operation extremely slow even after the system recovery

  I have a series of g laptop and on last week, it started running VERY slowly after the start. It came from nowhere, because it allows to work just fine the day before. So yesterday, I restored the factory setting and saved without previous files or documents. He worked as new for a few hours and then it suddenly becomes very slow. It's so slow that it freezes or it loads forever when I just click or click on the Start button. Pretty much everything I had there, it was iTunes malawarebytes, utorrent, steam and some other stuff that is were all on my computer before the problems began. Help will be greatly appreciated!
  
  Best regards, Nicolas

  Hi Nicolas,.

  Regarding the size of the hard drive, there may be problems with the recovery process if you are installing a drive of smaller capacity than one that was originally supplied with your laptop - the same size or slightly more is Ok.

  Unfortunately, I do not see the image of your link, but I think I know what you are referring.

  I guess than the previous you reinstalled the operating system is using the D Partition of hard disk recovery.  However, with a new disc, it will not be possible that the disc is not completely empty.  You will need to use a set of recovery DVDs to reinstall the operating system on the new drive - however, this procedure going to re-create the recovery on the new drive Partition automatically.

  All you have to do, once the new drive has been installed is to operate on the esc key when you launch Notepad to open the Start Menu.  Insert the recovery DVD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.  This will start the Recovery Manager and the whole procedure will be very similar to the previous method, you used - you will be prompted by the software when you need to change DVD to continue the process.

  Kind regards

  DP - K

• I lost my WiFi signal after having placed a time Capsule in the system. Now the Airport Extreme will not recognize the system. Any ideas?

  Any ideas on why my Airport Extreme will not recognize the system after the integration of the time Capsule in my system? Continues to have a flashing yellow light after trying all suggestions of technicians from the Apple Store and Internet provider.

  Since we don't know all what has been tried, we will have to start from the beginning if you don't mind.

  What exact models are your AirPort Extreme and Time Capsule? What is the brand and model of your modem Internet? I'll assume that Extreme is your "main" router and is directly connected to the modem by Ethernet... correct?

  Do you have the Time Capsule (TC) connected to the extreme, by wire or wireless? What is your goal for the TC? In other words, will not be used to extend the reach of the extreme wireless?

• Silverlight doesn't run - 'lack of some components of the system for the automatic updates'

  I just installed Silverlight, but when I tried it, the next run messageappeared 'Lack of some components of the system for the automatic updates'. I logged on the microsoft page, but here I didn't know what to do?

  Thanks for your help.
  Rose

  Hi RoseMaryInes,

  The question you have posted is related to Silverlight and would be better suited in the Silverlight forums:

  http://forums.Silverlight.NET/forums/

  Please visit this link to find a community that will support what ask you

  Thank you for visiting the Microsoft answers community.

• How can I perform a recovery of the system for a mini HP?

  Original title: System Recovery.

  How can I perform a recovery of the system for a hp mini?

  Hi waynemeyer,.

  1. why you want to make a system restore?

  2. you have a question about your computer?

  3. you have installed on your computer Recovery Console?

  If you try to restore the factory settings, you will need to contact the manufacturer of the computer for help.

  Contact HP

  Hope the helps of information.
  Please post back and we do know.

• Failure of the system for Windows 8 image backup

  I downloaded Windows 8 a few days ago. I tried to create a system image to an external drive, Western Digital 500 GB (409 GB free) four times and each time after a few minutes a message said that the backup failed. The backup of the recovery Partition seems end OK every time. The failures occurred after a minute or two in the backup of the C: drive of the OS.

  The external hard drive checked OK. The player has already had an image of the system for Windows 7 which was removed before the backup attempt. Here are 2 messages I received as the backup failed. The other 2 were much the same, I think.

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The mounted backup volume is inaccessible. Try the operation again. (0X8078004F)."

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The specified drive is not found. (0 X 80780081)"

  Below are the 2 files on the external hard drive after the failure. I guess that the first was the complete recovery Partition backup. I don't know much about this sort of thing.

  7da23344-ab79-11e1-887d-806e6f6e6963.vhdx - 7.61 GB
  7da23345-ab79-11e1-887d-806e6f6e6963.vhdx - 7.00 MB

  Anyone have any ideas on the problem? The software only virus on the PC is Windows Defender that came with the operating system.

  Fifth time is a charm, I suppose. I tried saving image system for the fifth time and successfully completed this time. Nothing has changed on my system or readers.

• I signed up for 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  I signed up for a 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  http://helpx.Adobe.com/x-productkb/global/trial-software-expired-early.html

• Whe trying to update ios to ios 9.3 9.2.1 come error 3194 give me the solution for all I phone and ipads

  Whe trying to update ios to ios 9.3 9.2.1 come error 3194 give me the solution for all I phone and ipads

  Try some suggestions here: If you see error 3194, error 17, or "this device is not eligible for the requested build" in iTunes - Apple Support

• How to permanently change the font for all emails color

  How can I change the color of the font for all my emails constantly?

  E-mail address is removed from the privacy *.

  Hello Msmouser,

  What mail client do you use?
  If you use Outlook, I suggest to look at this article:
  http://Office.Microsoft.com/en-us/Outlook-help/change-the-default-font-or-text-color-for-e-mail-messages-HA010239585.aspx
  If you use your web mail from Verizon, I would say that to visit the Verizon Mail support page:
  http://www22.Verizon.com/ResidentialHelp/
  If you use Windows Live Mail, please visit:
  http://www.windowslivehelp.com

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• How to extract the ddl for all databases of links?

  DB: oracle11gr2

  Friends,

  I can get including db link the package DBMS ddl but could not able to find a way to extract the ddl for all the database link and the coil in a file recreate them in the future?

  Tried searching on OTN but no luck, if someone shares how them spool or point me to a particular forum that will be great.

  Thank you

  We may also use something simple, select as below to extract the ddl

  Select dbms_metadata.get_ddl ('DB_LINK', db_link, owner) vSQL of

  dba_db_links

  /

• Can I get the videos for all of the concepts of photoshop learning?.

  I have an account paying adobe... Can I get the videos for all of the concepts of photoshop learning?.

  All I see is that links like

  CC Photoshop tutorials | Learn how to use Photoshop CC

  Above links are available even without an account.

  Should I have any extra advantage to access additional videos (as in lynda.com where they have the series of videos that explain how to do something with explanation of the concept)

  Originally, there was a selection of 'members only' videos on the Adobe Web site. But this project was abandoned and all content has been made public.

• Photoshop, Illustrator and InDesign does not update instead, I "Start free Trail ' and 'Buy now', when I have the license for all 3. What should I do?

  Photoshop, Illustrator and InDesign does not update instead, I "Start free Trail ' and 'Buy now', when I have the license for all 3. What should I do?

  Hey Geri,

  Please check the help below document:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Kind regards

  Sheena

• How to connect to the database for all reports EN

  Hello
  
  I've developed 100 reports in the client of the production, test purpose that I moved
  test client. How can I connect to the database for all reports at once?
  
  Concerning
  Thaer

  Hi Thaer,

  You can connect to the connection of database for all reports through the workspace of HFM.

  Connect to the HFM area--> click--> Explorer, and click Tools--> click Manager of database and respective connections of Production Instance to the Instance of Test required information and that you will be able to connect to the Test database for all reports both change.

  Kind regards
  Srikanth