Captivate 9 Drag and Drop DropIncorrect State does not

Similar Questions

• Drag and drop inside SWFLoader does not

  I have a Flex application that loads a high Flex application via SWFLoader. The secondary application uses drag-and-drop operations to rearrange items, delete them etc.  The secondary application works perfectly when it runs by itself (for example, not "incorporated" via SWFLoader in the main application).

  Once I have load in the main application using a SWFLoader operations drag - move no longer work correctly. All other events seems to work very well. It is only drag and drop that don't always work right.

  Y at - it something that I'm missing that would cause this issue? I think there may be a property that I need to put on the SWFLoader. I hope someone can help.

  You could maybe make a component, implemented as a module and load only for users who need to see it.

• Captivate 8 drag and drop interaction does not

  Hi, I work with 8 Captivate and created an interaction drag-and - drop using the wizard to drag / move. For some reason when I preview the interaction some of my sources of drag and others are not. I searched high and low for what I can hurt, but I can not understand. I created types when doing the interaction so it is not sensible that some should work and others don't. Thanks for any help you can provide.

  Hi Vaneppmc1,

  You have disabled the option accept all of the dialog "drag accepted Source. (as seen from your capture screen images).

  If the option "accept all the" is checked, the target can accept 'ALL' sources who are ticked in the column 'Drag Source Types '. In your case, Image 9 can accept sources of type "Bad conscience".

  Since you have unchecked the option accept everything, and the value of Count is 1 (which is default). Here so the target can accept only 1 source of type "Healthy Conscience of the United Nations" and lift reject legend of error on the acceptance of another source.

  Check the option "accept all the ' try and let me know if this works for you.

  If this does not solve your problem please share your Cptx file to address the issue by e-mail ([email protected]).

  Thank you

  Derrick

• Captivate 7 Drag and Drop

  I created a drag and drop for a Captivate 7 project. I want an image to display when the learner Gets the correct interaction. I want a different image to appear if the learner Gets the incorrect interaction. It doesn't work the way I configured it and display the image correctly even when I finished the Drag and Drop incorrectly.  Suggestions?

  

  And what then is the first timeline?  It is a completely different, where are the Feedback text captions?  And you not answered my questions: why sprawl of these legends on the timeline, staggering of the buttons?

  I don't see why you need a second slide just to show your comments? I gave you a link, have you read this article? I explained how to display a legend for the success, and the legend of failure is already built into the D & P. Still, I suspect that you don't understand its features.

• Captivate 8 Drag and Drop several legends of text for your comments

  Hello

  I am creating an interaction with an element with which the learner can drag for four different images representing the different categories of data classification.  The idea of the interaction is for the learner to discover each of the four different categories, by trial and error.    I want them to provide comments through text captions that the answer is right or wrong, but each piece of comments will be different and the user should be able to drag the item several times until they found the right answer.  I can't fwork how to do this.

  I just upgraded to Captivate 8 week last, after having previously used Captivate 5.   Therefore, I've never used the installation drag - d├⌐poser and I don't know if he's going to do what I'm trying to achieve or if it's something I could achieve with shares advanced instead, or if it is not possible to do. I tried searching for similar topics, but either did not understand the answer or scenarios seemed different.  I don't really know where everything is still 8 Captivate, and while I have used certain actions in Captivate 5 tip, I'm not that comfortable with them, so simple is good.  The interaction doesn't have to be reported on.

  Is anyone able to help me please?

  Thanks in advance for your help.

  Hello

  According to my understanding, you have a source element that can drag and drop on 4 different targets (different images). For every drop of a sort of legend should appear on stage the feedback to the corresponding user from the target source. (Correct me if I'm wrong)

  This can be achieved with Drag and drop interaction.

  1. Insert the source 4times and overlap each other (since you can drag and drop 1 number 4 times, you must have this element to work as a source of slippage 4 up to 4 items).

  2. make the 4 elements as drag source and group them into a single type. (With the help of add option)

  3. you have your 4 images on stage and Mark as targets of drag.

  4. Insert the rear power legends and put them near their targets. Disable their 'Visible output' flag on Bill pro forma.

  5. now match the Correct ANS on stage.i.e of one of the source type to a target correct years.

  6. Select each target and open their box "Actions of the object". (from Panel drag / move)

  7. uncheck the ' accept all the ' option and the value of count 1. Add the action of 'travel' to show their legends of Feedback now under Drag source Type. (which were hidden). This should be through "Advanced Actions.

  8. now after for each target open the dialog box 'Good years' drag and drop the Panel. (it will be under options and so visible from the source or target is selected)

  9. here under the table, you can see that the value of count is 4. This is to reduce the value to 1. (double-click to change)

  Interaction is now ready. Please don't answer if that's what you wanted to achieve and if you do all the steps above.

  Derrick

• Captivate 8 drag and drop interaction

  Hello

  just have a look at the new captivate 8 and when I try to do a drag - déposer question I go to normal place of window > drag and drop. but the problem is the drag and drop option is grayed out - would it because I have only this class on a copy of the trial?

  Nope.  This is because cannot not have slip and fall in a sensitive to the Cp8 project.

  Try to create a normal inadmissible project and you should find that drag-and - déposer is not disabled.

• Captivate 8 Drag and Drop - selection of Audio files for interaction

  I see where the box is for the selection of audio data to play (Drag and Drop/Options/Interaction properties). I want to select the audio file that will be used, but I don't see where the new place is to select and add the file. I checked the training videos that came out this week, but add the audio was not included. Help appreciated.

  Hello

  Choose an audio file,

  Select the Drop target in the scene. Drag and Drop Panel-> Format-> behavior Snap tab, you can find the Audio menu down.

  Custom Audio file can be selected by clicking Browse next to the drop down.

  Kind regards

  Alexis

• How to add a code so my drag and drop movie clip will not stick when he's slipped to o final place

  Hello everyone and kglad, I have to use the old drag and drop code on my video clips, but the problem is when I drag the movieclip to the area on my .swf file as soon as I release it, it sticks to the author of the hand.

  I am encloseing I am using the action script could someone or kglad tell me what is missing in the code so that once he is out it does not stick, see the code below

  circle.onPress = function() {}
  startDrag (this);
  }
  circle.onRelease = function() {}
  stopDrag();
  }

  I am desperate for help on that must get ready for this afternoon

  Seal55

  the following is preferred:

  Circle1.onPress = function() {}

  this.startDrag ();

  }

  Circle1.onRelease = circle1.onReleaseOutside = function() {}

  this.stopDrag ();

  }

• copy/paste (drag and drop) host <>customer <>do not work

  Hello

  I have vmware workstation 7.1.1 on a host windows7 (64) and xp (sp3) client. I'm trying to copy some text from the client to the host with the Clipboard. It does not work.  The setting for the isolation of the comments in the Settinmgs virtual machine (options tab) are both enabled. I also activate vmci.

  I tried to copy back and forth and you don't see any effect (dough is always disabled or not content). Drag-and - déposer stop when I try to leave to the client window.

  any help is welcome.

  concerning

  Georg

  Do you have the VMware Tools installed in the XP VM?

  André

• Apex run and build the State does not

  Hi all

  I installed the Apex and the installation went through without error. I installed and deployed to Weblogic 10.3.6.0. My problem is that the run and build the application version does not have event, although in the f103.sql file I p_build_status = > 'RUN_AND_BUILD '. The column build_status of APEX_040200.wwv_flows also has the value RUN_AND_BUILD. Also the status of the dba_registry column is set to VALID, and the version column is correctly set to 4.2.3.00.08. However, when I enter the URL/http://hostname/ReportServer: port/apex/I get an ORA-01403: no found error. Also, if I try http://localhost:7001/apex/apex_admin I get an error 404 - not found. However, I am able to properly connect to the version of the query - http://hostname/ReportServer: port/apex/f? p = 103 Any help would be greatly appreciated.

  "2715682," Hi

  I don't think that there is nothing to see the status of your application "run and build."

  1. Is there a chance that you performed an installation of runtime instead of a complete installation?
  2. How did you import your application 103?
  3. When you get the HTTP 404 error, are there errors in the Web server log?

  Joel

• Captivate 7 Drag and Drop issue

  I'm trying to create a drag & drop with a correct target and six items of your choice. Three correct answers and incorrect three. I would like to have three elements fall in, while the three should not. My problem is that I can't Captivate to "reject" the three incorrect when dropped into the target... I'm sure it's something simple, and I'm right on it. Anyone have any ideas?  Thanks in advance!

  You will need to check that if the target is configured to accept only made good drag sources. Select target, click the object in steps (Format tab). By default it is configured to accept all, uncheck the bad drag sources.

  

• Drag and Drop in Captivate 6

  Hello

  I have a Captivate 6 company licensed version. I would like to know how to use interaction drag-and - drop.

  Thanking you.

  Regarding

  Leena

  What version of Captivate 6 do you have? Drag / move activity is included in Captivate 6.1 from. For earlier versions, the best would be to buy Infosemantics widget here:

  http://Infosemantics.com.au/Adobe-Captivate-widgets/drag-and-drop/which-Adobe-drag-and-DRA g-and-decline-widget-comparison

  Anthony

• Drag and drop the models of the range of functions

  I really like how can I drag and drop a States JKI Machine in range of my service on a block diagram.  Instead of placing a Subvi on black chart, the code in the template is placed on the block diagram.  How can I get my own templates for this?

  I have just learned about this and put in place with a few VI.

  This should happen to you. TST is pointed out that, in the first post, he called VI merge, but got renamed to pour into VI, LV 8.5

• Cannot drag and drop files from library

  I just installed Muse and began to watch the tutorial until I came across a problem: I can't drag and drop files as does the Lady in the video and I don't know how to solve the problem, I don't want to renounce the Muse of learning if no solution will be found :/ I hope that someone will help!

  SOLVED

  Muse has defiantly a bug, if you select an object, first of all, in the content of your region and your willingness to see the cc library allow to add items.

  

  This however, only the element which is already included in your project Muse.

  I have solved this problem by using the cc Adobes library in another application, Illustrator and Photoshop.

  All of my graphics and fonts are now synced to my library of cc and when I return in Muse, fixed!

  all my items are there to use the library of cc AI or Psd.

  

• Drag-and - drop 'submit' button and hand - 9 Captivate slider

  Unlike normal questionnaires 'submit' buttons, the Captivate 9 Drag & Drop 'submit' button does not appear able to show the hand cursor to the passage of the mouse.

  Importing a project of Captivate 8 to 9, it sometimes works, sometimes doesn't work, so I can't find a way to make it work on naked new projects created with Captivate 9.

  The Drag & Drop option "Use hand cursor" is clearly displayed, although affecting only the sources and targets but not the button 'send '.

  Captivate 9 runs on Windows 7.

  Thanks for the help,

  Matteo

  Moderator: I took your personal address, this is a public forum

  I'm sorry, but the button submit in D & D seems to have the ability to display the hand cursor. It uses the same style buttons embedded on the Quiz slides, but the hand cursor doesn't do not part of the style. I've often done drag the button to send off the stage and just set hotkey (as input).  I also checked in Captivate 8 but he has never had the option to display a hand cursor to the button send D & d, so I'm surprised when you write "when you import a project of Captivate 8 to 9, it works sometimes"