Drag and Drop in Captivate 6

Similar Questions

• The show with drag and drop in Captivate 9

  Hello

  I am creating a drag and drop interactivity 9 Captivate. In step 3, when I had to drag the objects from the source to the drop target, all objects in the screen were locked. I couldn't click as well as she was listed on the timeline . Please suggest.

  Using the wizard or the D & D Panel? Is this normal or a receptive

  of the project? You are on Mac or Win.

  For the wizard: .you should see a center point on each source of drag.

  You must drag a line from this central point to the drop target. You did

  create a type?

• Drag and drop the Captivate 6.0

  The Drag and Drop on my Captivate 6.0 feature is no longer active. I think it's because Windows has been recently charged on my computer. How can I get that back?

  You are showing the dock with panels. Have you tried Insert, Assistant launch Drag & Drop? Or if you want to see the Panel, try window, & slipped. All the panels are in the window menu.

  Lilybiri

• Drag and drop the legend of failure time

  Hello

  I did a Drag and Drop in captivate 8.

  I want to keep the legend of failure more visible.

  Is it possible to increase the time of the legend of failure?

  Thank you

  Select the legend of failure and change "timing" in synchronization properties panel:

  

• Widget Infosemantics Drag and Drop Interactive

  I added the Infosemantics Drag and Drop Interactive widget to my project, but it works only after the publication by a computer and not on an iPad.  I've published using SWF and HTML5, so it "should" work. The HTML Tracker for this slide does not list the blades not taken in charge or objects.  If this widget is not compatible with the iPad, is the new drag and drop feature Captivate available for subscription customers and ASA work on an iPad?  If so, is there a student for ASA or a subscription fee? Thank you very much.

  No, the widget drag / move does not work on your iPad.  No Infosemantics widget is compatible with HTML5 output at this time.  Forgot to widgets, HTML5 Tracker be not necessarily compatible, so it is not a good guide in this instance.

  Captivate 6.1 drag and drop feature works (somehow) in HTML5.  I suggest that you go down that road.

• Drag-and-drop success Message and Timer on all chassis in Captivate

  Hi all

  I'm trying to do two things in a captivate project that I am working. They are:-

  1. I have an exercise slide - déposer I chose the setting that the decline does not accept point slide wrong and sends it back immediately. I'm doing a legend of success as 'Good work' or something displayed on the user put all the drag source in the correct deposit boxes. I do not use the submit button. Once appears the legend of success, the user can click a next button to move to the next slide. I am not able to put the legend of success.

  2. I'm trying to put a timer on the blades so that the user can see the total length of the e-Learning, time elapsed or time left on all slides.

  Can you guys help me with these questions I have.

  Thank you

  Aashish

  Hello

  1. you define the activity of Auto submit the correct answers. It is under the accordion of Options in properties of Drag and Drop. Then run an advanced action to display the legend of success and the next button on the success of the activity.

  2. to do this, I would recommend the blog of Lilybiri here.

  Displays the time information - Captivate blog

  Anthony

• Captivate 7 Drag and Drop

  I created a drag and drop for a Captivate 7 project. I want an image to display when the learner Gets the correct interaction. I want a different image to appear if the learner Gets the incorrect interaction. It doesn't work the way I configured it and display the image correctly even when I finished the Drag and Drop incorrectly.  Suggestions?

  

  And what then is the first timeline?  It is a completely different, where are the Feedback text captions?  And you not answered my questions: why sprawl of these legends on the timeline, staggering of the buttons?

  I don't see why you need a second slide just to show your comments? I gave you a link, have you read this article? I explained how to display a legend for the success, and the legend of failure is already built into the D & P. Still, I suspect that you don't understand its features.

• Drag and Drop Captivate 7: failed to compile SWF. Note: Please check if one of the actionscript keywords is used as a variable user name

  Hello

  I have a problem. I drag and drop as it should and that he played in 8 but when I try it on my laptop, I get the above error. How can I fix?

  Thank you very much

  Try to clear the cache of your project.  If this does not work, delete your preferences.  You will need to do it anyway since you said you reinstalled Captivate.

• Captivate 8 Drag and Drop several legends of text for your comments

  Hello

  I am creating an interaction with an element with which the learner can drag for four different images representing the different categories of data classification.  The idea of the interaction is for the learner to discover each of the four different categories, by trial and error.    I want them to provide comments through text captions that the answer is right or wrong, but each piece of comments will be different and the user should be able to drag the item several times until they found the right answer.  I can't fwork how to do this.

  I just upgraded to Captivate 8 week last, after having previously used Captivate 5.   Therefore, I've never used the installation drag - d├⌐poser and I don't know if he's going to do what I'm trying to achieve or if it's something I could achieve with shares advanced instead, or if it is not possible to do. I tried searching for similar topics, but either did not understand the answer or scenarios seemed different.  I don't really know where everything is still 8 Captivate, and while I have used certain actions in Captivate 5 tip, I'm not that comfortable with them, so simple is good.  The interaction doesn't have to be reported on.

  Is anyone able to help me please?

  Thanks in advance for your help.

  Hello

  According to my understanding, you have a source element that can drag and drop on 4 different targets (different images). For every drop of a sort of legend should appear on stage the feedback to the corresponding user from the target source. (Correct me if I'm wrong)

  This can be achieved with Drag and drop interaction.

  1. Insert the source 4times and overlap each other (since you can drag and drop 1 number 4 times, you must have this element to work as a source of slippage 4 up to 4 items).

  2. make the 4 elements as drag source and group them into a single type. (With the help of add option)

  3. you have your 4 images on stage and Mark as targets of drag.

  4. Insert the rear power legends and put them near their targets. Disable their 'Visible output' flag on Bill pro forma.

  5. now match the Correct ANS on stage.i.e of one of the source type to a target correct years.

  6. Select each target and open their box "Actions of the object". (from Panel drag / move)

  7. uncheck the ' accept all the ' option and the value of count 1. Add the action of 'travel' to show their legends of Feedback now under Drag source Type. (which were hidden). This should be through "Advanced Actions.

  8. now after for each target open the dialog box 'Good years' drag and drop the Panel. (it will be under options and so visible from the source or target is selected)

  9. here under the table, you can see that the value of count is 4. This is to reduce the value to 1. (double-click to change)

  Interaction is now ready. Please don't answer if that's what you wanted to achieve and if you do all the steps above.

  Derrick

• Drag and Drop Feedback in Captivate reg 7

  Hello

  I have a drag and drop into a slide (7 Captivate) as a control of knowledge.

  Problem: I need correct feedback interaction drag-and - drop is reset whenever the learner does not return to the slide slide / move later or click on the back of the next slide button. Currently, the correct feedback is present.

  Background: The learner ends slide it / move and gets feedback 'Okay!' action show and "Incorrect" comments of the existing captivate feedback: failure. The learner then continues the lesson on the way to the next slide. The problem is that, if the learner is returned for drag / move, 'Okay!' feedback still shows even if the drag source items are reset to their original locations and the learner can repeat the interaction drag-and - drop. By clicking on the button "Reset" does not remove the existing 'Okay!' feedback. Even if the learner restores the interaction and the opposite effect (for example if the learner is wrong the first time, but then correct themselves the second time), the existing comments do not change to "correct".

  Any ideas on how to solve this problem? I understand that we need to create advanced actions. Please tell me the exact steps in this case, and if I have to perform actions on enter or exit.

  Note: I am tired of reading messages associated with it. But the creation of the advanced options step did not have.

  Thank you.

  Ok.  Just a question because I saw one of the Adobe people chime in on a similar question a couple of days back.

  Unlike the quiz questions, success and failure captions to make drag and drop interactions seem to have names of elements which suggests that they may be hidden by advanced Actions.  You should try to define an action on slide enter to hide and see if that solves your problem.

• Captivate 8 drag and drop interaction does not

  Hi, I work with 8 Captivate and created an interaction drag-and - drop using the wizard to drag / move. For some reason when I preview the interaction some of my sources of drag and others are not. I searched high and low for what I can hurt, but I can not understand. I created types when doing the interaction so it is not sensible that some should work and others don't. Thanks for any help you can provide.

  Hi Vaneppmc1,

  You have disabled the option accept all of the dialog "drag accepted Source. (as seen from your capture screen images).

  If the option "accept all the" is checked, the target can accept 'ALL' sources who are ticked in the column 'Drag Source Types '. In your case, Image 9 can accept sources of type "Bad conscience".

  Since you have unchecked the option accept everything, and the value of Count is 1 (which is default). Here so the target can accept only 1 source of type "Healthy Conscience of the United Nations" and lift reject legend of error on the acceptance of another source.

  Check the option "accept all the ' try and let me know if this works for you.

  If this does not solve your problem please share your Cptx file to address the issue by e-mail ([email protected]).

  Thank you

  Derrick

• Captivate 8 drag and drop interaction

  Hello

  just have a look at the new captivate 8 and when I try to do a drag - déposer question I go to normal place of window > drag and drop. but the problem is the drag and drop option is grayed out - would it because I have only this class on a copy of the trial?

  Nope.  This is because cannot not have slip and fall in a sensitive to the Cp8 project.

  Try to create a normal inadmissible project and you should find that drag-and - déposer is not disabled.

• 8 - Drag and Drop - Bounce Back answers that are out of sequence of Captivate

  Sorry if it's addressed somewhere, but my search results find anything. I'm building a drag and drop in which objects should be waived in order in various targets. I can get an object of bounce if it fell in the wrong place, but I also want the object to bounce back if it broke down (in the wrong order). For example, if point 2 fell in the right place, but in the wrong order, it will be returned. But I can't find an option for that. Any ideas? Thank you!

  I don't think there's a way to get there. Only drag sources that cannot be accepted by a drop target can be bounced. But with the sequence, the drag source must be accepted even if it is not in the correct order.

• Captivate 9 Drag and Drop DropIncorrect State does not

  Hello!

  I ve done a Drag and Drop interaction, where I have 4 targets and 4 drag only one correct answer for each of the sources. I've added States for Drop targets:

  DropCorrect State, The target turns Green when pressing submit, and the answer is correct.

  DropIncorrect State, target Drop becomes Red when press submit and answer is incorrect.

  I thought that it would be a good way to show the user which targets Drop are correct and which aims to drop they must change to get the right answer.

  When the answer is correct, Drop targets turns green and I made an action that says "OK, click anywhere to continue."

  BUT when the answer is wrong, nothing happens to the colors of the Drop target. It s just a failed, Try Again message. Nothing more.

  Why isn´t the State DropIncorrect showing when I press the submit button and the answer is incorrect?

  I just checked the file of this article, which was created on an earlier version of 9 and it works well also for the State of DropInCorrect, but I have only 1 attempt! I suspect that your endless attempts are the cause of the DropIncorrect does not. Compare it with actions on a question slide: success action will be performed when the answer is correct, but the other action will be done only at the last attempt is finished and the answer is wrong. Since you have endless attempts, this last attempt event never occurs.

  Sorry for the late reply, wanted to check a second time and has been very busy today.

• Drag and Drop Captivate 9

  Hello!

  I created a drag and drop.  3 target and down 3 points.

  • When an item is dragged, properly, I want to play a sound.  And, it does.
  • When I drag the element according to the target, and that's okay, I hear nothing.
  • The same with the third answer.
    
    Question 2;
  • What the fall and drag supposed to work with the button 'Submit' I have these sounds applied when the answer is correct?
  • How long must we show on the timeline?

  Thank you

  Norma

  Submit the will confirm the answer, add the score to total score and the actions that you specify on the success, failure will be executed.

  Noise: you configured the actions of the object to play the sound?

  No need to increase the timeline, D & D has a point of suspension. Actions tab see: default setting is 1.5secs. Submit that the read head can be released, that's why the default success action was defined on continue; You can change this action of course.