Captivate 8 - firewall Windows has blocked some features on launch

Similar Questions

• Loading magic jack I get an error: Windows Firewall has blocked some features of this program.

  Windows security alert...

  I installed MajicJack phone on the computer and created an Exception for MJ in the Windows Firewall Exceptions tab. However, when MJ loading an error message says that firewall Windows has blocked some features of this program. The message does not give me an option to unlock. What should I do as I already created an exception?

  Hello

  1. are you referring to the Windows Firewall or any other firewall?

  2 have you made changes on the computer before this problem?

  3. facing this problem with taking magic or any other application?

  I suggest you try the following steps.

  Step 1:

  If you use Windows Firewall, disable the firewall and check the status of the issue.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions? http://support.Microsoft.com/kb/283673

  Note: make sure that you enable the antivirus software, other security and firewall programs.
  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   

  Step 2:

  If the application works fine after disabling the firewall, turn on the firewall and check the status of the issue.

  If the problem persists, please check the Event Viewer logs and respond with more information to help you better.

  How to view and manage event logs in Event Viewer in Windows XP http://support.microsoft.com/kb/308427

• The computer hangs after connecting first time. Dell Support Center will not stop running. Windows has blocked some startup programs.

  Last week, I used Ad-Aware, Spybot and malware to scan my computer.  They found several things, but my problems are now: computer falls down after a time of connection the first only.  The center of Support Dell continues to operate for a few minutes, I just cancel now.  "Windows has blocked some startup programs" keeps popping up in the lower left corner.  I uninstalled Spybot but do I have to uninstall the other 2?  During these changes last week, I changed too Trend-Micro (which was nothing capture) to the free version of AVG.  Help, please.  Muzictchr

  Last week, I used Ad-Aware, Spybot and malware to scan my computer.  They found several things, but my problems are now: computer falls down after a time of connection the first only.  The center of Support Dell continues to operate for a few minutes, I just cancel now.  "Windows has blocked some startup programs" keeps popping up in the lower left corner.  I uninstalled Spybot but do I have to uninstall the other 2?  During these changes last week, I changed too Trend-Micro (which was nothing capture) to the free version of AVG.  Help, please.  Muzictchr

  Hey muzictchr

  did you completely remove micro trend in your system

  You can use an installed antivirus or conflicts occur

  Use the tool to uninstall micro trend from the link below to remove all vestiges of what it may be the cause of conflicts with avg

  http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  Walter, the time zone traveller

• Windows has blocked some programs

  I kept receiving a ball at startup so that windows has been blocking some programs, so I improved my administrator status and entered diasable all and now can't do anything.  Help, please!

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• on my desk: Windows Firewall has blocked some features of Firefox public and private networks? What does that mean?

  I turned on my lap and a huge dialog box appears with the message above. I didn't know whether to 'Access' or 'Cancel' then just closed. Please explain.

  Firefox 36 requires the Firefox Windows to create new access rules, and Windows asks if you really want to do this.

  I do not think that these rules are necessary for the current version, but are designed to take account of the features provided in a future release, so you can cancel it just for the moment.

• Message which reads "windows has blocked some startup programs" then asks to install "helper.exe", but a warning not to install it, unless you know the program. What should I do? Thnaks.

  Information given in the title.

  Helper.exe is can be part of LIUtilities SpeedUpMyPC. For more information, contact Uniblue. However, it is probably malware. Scan with Windows Live Onecare http://onecare.live.com/site/en-ca/center/whatsnew.htm or Panda Scanner http://www.pandasecurity.com/activescan/index/?track=1&Lang=en-US&IdPais=63 or your antivirus to find out.
  I hope this helps.

• To start Windows tells me that it has blocked some of my startup programs.

  original title: problems with start-up

  When I turn on my computer, I get a notification that windows has blocked some of my startup programs.  This problem started about two months ago and I do not understand why.

  They are important elements of the registry-related programs and my anti-spyware or anti-malware for example programs.  Why this is happening and what I can do about it?

  Hi EvelynWeber,

  Follow the steps listed in the article mentioned below to solve the problem:

  Error message when you start a Windows Vista-based computer: "Windows has blocked some startup programs".

• Touchpad has lost some features

  My touchpad has lost some features... I can still do the click function but striking swiping does not move the cursor. (I had to add a mouse to the laptop to get my cursor to move).

  It begins only after I have connected to the computer. The touchpad has all of the features, while I'm on the login screen, it starts only failed once Windows appears. Which leads me to believe that this is a setting in Windows.

  I tried to disable and re-enable the touchpad in the mouse settings functions; remove the touchpad Device Manager and restart the computer. checked all my touchpad settings were the same, none had changed.

  Windows says I have the latest drivers for the device. But just to be sure, I entered my model number of the laptop on the Toshiba Driver Downloads box and downloaded the synaptic drivers. When I tried to install these drivers installation has failed. (I have not yet tried to remove the drivers that came with the laptop, but that try next if I can't find something else that solves this problem.)

  Can someone please offer suggestions on what else to try?

  At first, I must say that it will be interesting to know what model of laptop you have and what operating system you use.

  Have you tried to turn the touchpad on or off using the F keys?

• I have Mozilla Firefox on my computer and I am trying to go to a Web site, it tells me that Windows has blocked the Web site.

  Original title: Windows has blocked a website!

  I have Mozilla Firefox on my computer and I try to go on a site that I need to go to desperately for school work and it tells me that Windows has blocked the Web site.  How do the Web site and how to unlock the problem?

  Hello
   
  1. what happens when you visit the same Web site using Internet Explorer?
  2. what operating system is installed on your computer?
   
  Given that it is a problem with Mozilla Firefox, you can contact Mozilla for better assistance.
   
  Here is the link: http://support.mozilla.org/en-US/questions/new
   
   

• Windows has blocked a potentially dangerous file and will not allow him to ti be installed from canon printers

  Windows called a potentially dangerous file and will not be installed, it is from the canon printers, how can I install it?
  Windows has blocked data access cab 1

  Hello

  1. which version of the operating system you are using on the computer?
  2. What is the accurate and complete error message that you receive?
  3. have you made changes on the computer before the computer?
  4. are you trying to install the printer software\downloading turn off the internet?

  Method 1:
  You may need to download the correct driver\software from the manufacturer's website only.

  Method 2:
  You can perform the clean boot and try to install and check:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 3:
  You can disable the security software and check
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

  I hope this helps...

• Windows has blocked this software because it cannot verify the Publisher

  Original title: error playerPT.cab

  I encounter errors when executing my linksys WVC200 camera, during the installation of Active X, it says that Windows has blocked this software because it cannot verify

  the publication server.

  error PlayerPT.cab and I am using Windows Vista.

  Hello

  Did you do changes on the computer before the show?

  (1) what web browser do you use?

  (2) what applications you are trying to download?

  Follow the steps indicated by the ITknowledge24, from the link as dated February 8, 2010.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-to-open-a-program-which-Windows-has-blocked/1c8d6c67-569e-4429-9b1c-b732df626958

  For reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/Windows-blocked-software-because-it-cant-verify/aa248f02-Abe3-4f11-b838-609e7ef1a457

• Firewall problem: "firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  My firewall doesn't let me turn it on. McAfee says that my computer is in danger because my firewall is not on and tried to turn back on. It gives me an error code and says ' firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  Because you pay McAfee protection antimalware we assume that asked for the help of McAfee Support? http://service.McAfee.com/

  Try this: http://support.microsoft.com/mats/windows_firewall_diagnostic/

• Firewall Windows cannot change some of your settings. Error code 0 x 80070424

  I use 8 (64-bit) windows, try to turn on "Windows Firewall".

  Get this error "firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  I tried to locate the "Windows Firewall" services in the service (in Services.msc) database, but this service is not listed. Help, please

  Thanks Robear,

  Today, I just made "Reset PC" to make it back to my factory setting (even if I lost all my data, but I've got to the top of it). Then, I used "Norton Removal Tool" to remove Norton who was there in orginal factory setting.

  Now, I tried to run "Windows Defender" & "Windows Firewall" both are running without any problem.

  Thank you much for the help.

  Vikas

• Windows has blocked a file that I am trying to unzip

  I am trying to unzip a zip file and I get a message saying that my windows vista has blocked the file

  Please tell us the EXACT text of the error (including all codes) - he can help solve the problem.

  What is the full path of the zip file (where it is currently on your system)?  It can be in a place that has permission issues that must be addressed.

  What is the file type of the zip file (the extension to three digits following the point in the name of the file)?  Some file types can not be handled by Vista unpacking program.

  Maybe you can download, install and try the free program 7-Zip http://www.7-zip.org/ and it may have more luck have decompressed the file without being blocked (even if it depends on how and why he is blocked).

  Here is a link to a free zip repair tool if you need: http://www.diskinternals.com/zip-repair/ to check if your zip file is corrupt and can be repaired.

  I hope this helps and look forward to your answers to the questions here and above.  With these answers, we can help you much better.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.