Windows has blocked some programs

Similar Questions

• The computer hangs after connecting first time. Dell Support Center will not stop running. Windows has blocked some startup programs.

  Last week, I used Ad-Aware, Spybot and malware to scan my computer.  They found several things, but my problems are now: computer falls down after a time of connection the first only.  The center of Support Dell continues to operate for a few minutes, I just cancel now.  "Windows has blocked some startup programs" keeps popping up in the lower left corner.  I uninstalled Spybot but do I have to uninstall the other 2?  During these changes last week, I changed too Trend-Micro (which was nothing capture) to the free version of AVG.  Help, please.  Muzictchr

  Last week, I used Ad-Aware, Spybot and malware to scan my computer.  They found several things, but my problems are now: computer falls down after a time of connection the first only.  The center of Support Dell continues to operate for a few minutes, I just cancel now.  "Windows has blocked some startup programs" keeps popping up in the lower left corner.  I uninstalled Spybot but do I have to uninstall the other 2?  During these changes last week, I changed too Trend-Micro (which was nothing capture) to the free version of AVG.  Help, please.  Muzictchr

  Hey muzictchr

  did you completely remove micro trend in your system

  You can use an installed antivirus or conflicts occur

  Use the tool to uninstall micro trend from the link below to remove all vestiges of what it may be the cause of conflicts with avg

  http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  Walter, the time zone traveller

• Captivate 8 - firewall Windows has blocked some features on launch

  I saw this problem written online, but have not found a solution.

  Is anyone aware of a?

  Whenever I run 8 Captivate, I get the dialogue "firewall Windows has blocked some features.

  In this case if I run as admin or not.

  Thanks in advance for your suggestions!

  Keith

  For anyone else interested, I found a solution in this thread: Firewall exception whenever 8 Captivate is started

  I just found this. Try at your own risk. But it seems to have solved the problem for me.

  Keith

• Message which reads "windows has blocked some startup programs" then asks to install "helper.exe", but a warning not to install it, unless you know the program. What should I do? Thnaks.

  Information given in the title.

  Helper.exe is can be part of LIUtilities SpeedUpMyPC. For more information, contact Uniblue. However, it is probably malware. Scan with Windows Live Onecare http://onecare.live.com/site/en-ca/center/whatsnew.htm or Panda Scanner http://www.pandasecurity.com/activescan/index/?track=1&Lang=en-US&IdPais=63 or your antivirus to find out.
  I hope this helps.

• To start Windows tells me that it has blocked some of my startup programs.

  original title: problems with start-up

  When I turn on my computer, I get a notification that windows has blocked some of my startup programs.  This problem started about two months ago and I do not understand why.

  They are important elements of the registry-related programs and my anti-spyware or anti-malware for example programs.  Why this is happening and what I can do about it?

  Hi EvelynWeber,

  Follow the steps listed in the article mentioned below to solve the problem:

  Error message when you start a Windows Vista-based computer: "Windows has blocked some startup programs".

• Loading magic jack I get an error: Windows Firewall has blocked some features of this program.

  Windows security alert...

  I installed MajicJack phone on the computer and created an Exception for MJ in the Windows Firewall Exceptions tab. However, when MJ loading an error message says that firewall Windows has blocked some features of this program. The message does not give me an option to unlock. What should I do as I already created an exception?

  Hello

  1. are you referring to the Windows Firewall or any other firewall?

  2 have you made changes on the computer before this problem?

  3. facing this problem with taking magic or any other application?

  I suggest you try the following steps.

  Step 1:

  If you use Windows Firewall, disable the firewall and check the status of the issue.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions? http://support.Microsoft.com/kb/283673

  Note: make sure that you enable the antivirus software, other security and firewall programs.
  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   

  Step 2:

  If the application works fine after disabling the firewall, turn on the firewall and check the status of the issue.

  If the problem persists, please check the Event Viewer logs and respond with more information to help you better.

  How to view and manage event logs in Event Viewer in Windows XP http://support.microsoft.com/kb/308427

• Need help! Just got a message window on startup, which reads "path of data execution: to help protect your computer, Windows has closed this program: name: request for logon Userinit, Publisher: Microsoft.» Can anyone help?

  I just got an error message at startup, which reads: execution of data path: to protect your computer, Windows has closed this program: name: request for logon Userinit, Publisher: Microsoft.  My pc is under Windows XP SP2. I think that different multiple verisons of software "virus protection" began to appear in the Explorer. I know that they do not belong on my computer. I tried to close them, but they just kept moving forward. I'm trying to find some help to solve the problem. Moreover, when I close the window of Data Execution Prevention error message, I have my bottom, no other other icons for one of my programs are on the screen. Help... This can be corrected?

  Thanks in advance.

  Carter2009,
  If you started having 'Magical' Antivirus programs to appear on your system that you do not install, then you are infected.  Some people may be painful to remove, to others not so much.  I recommend http://www.malwarebytes.org/ for malware protection and http://www.microsoft.com/Security_Essentials/ for antivirus.

  But now you're in a bit of a place.  I download Malware Bytes and put it on a USB key.  Then see if you can boot in safe mode and run MalwareBytes.  If you're not in safe mode, take a look at this: http://support.microsoft.com/kb/318027

  Hope these helps. QQ learn manage!

• Windows has blocked this software because it cannot verify the Publisher

  Original title: error playerPT.cab

  I encounter errors when executing my linksys WVC200 camera, during the installation of Active X, it says that Windows has blocked this software because it cannot verify

  the publication server.

  error PlayerPT.cab and I am using Windows Vista.

  Hello

  Did you do changes on the computer before the show?

  (1) what web browser do you use?

  (2) what applications you are trying to download?

  Follow the steps indicated by the ITknowledge24, from the link as dated February 8, 2010.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-to-open-a-program-which-Windows-has-blocked/1c8d6c67-569e-4429-9b1c-b732df626958

  For reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/Windows-blocked-software-because-it-cant-verify/aa248f02-Abe3-4f11-b838-609e7ef1a457

• When you try to use Windows DVD Maker, get the message that Windows has closed this program

  Installed a new software for video (because the creation of windows dvd won't work) and before its opening, it says windows has closed this program... solutions.  And nothing!  It does this too often with internet explore.  Help!  Do I have to change some parameters of security or something?

  * original title - Windows maintains close everything I try to guess

  Hi twilight,

  ·         Do you have what video creation software installed?

  ·         How long have you been experiencing this problem?

  ·         Have you done other recent changes on the computer?

  ·         What is the exact error message/code?

  ·         The problem occurs with the entire application?

  I suggest you try the steps mentioned below and check if it helps.

  Step 1: Start the computer in safe mode and check if the problem persists.

  If the problem persists in safe mode run clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode

  Step 2: No detection system file checker (SFC).

  http://support.Microsoft.com/kb/929833

  Step 3: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• I have Mozilla Firefox on my computer and I am trying to go to a Web site, it tells me that Windows has blocked the Web site.

  Original title: Windows has blocked a website!

  I have Mozilla Firefox on my computer and I try to go on a site that I need to go to desperately for school work and it tells me that Windows has blocked the Web site.  How do the Web site and how to unlock the problem?

  Hello
   
  1. what happens when you visit the same Web site using Internet Explorer?
  2. what operating system is installed on your computer?
   
  Given that it is a problem with Mozilla Firefox, you can contact Mozilla for better assistance.
   
  Here is the link: http://support.mozilla.org/en-US/questions/new
   
   

• Windows has blocked a potentially dangerous file and will not allow him to ti be installed from canon printers

  Windows called a potentially dangerous file and will not be installed, it is from the canon printers, how can I install it?
  Windows has blocked data access cab 1

  Hello

  1. which version of the operating system you are using on the computer?
  2. What is the accurate and complete error message that you receive?
  3. have you made changes on the computer before the computer?
  4. are you trying to install the printer software\downloading turn off the internet?

  Method 1:
  You may need to download the correct driver\software from the manufacturer's website only.

  Method 2:
  You can perform the clean boot and try to install and check:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 3:
  You can disable the security software and check
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• iTunes is message to help protect your computer, Windows has closed this program with DEP.

  whenever I installed iTunes it gives me message "to help protect your computer, windows has closed this program" I did chang the Change data execution prevention settings. but after I closed the DEP screen it gives me the message "iTunes meet a problem and needs to close" I uninstall this appilication repeatedly and again I didn't solve the problem

  Ask the question in a forum of iTunes:

  https://discussions.Apple.com/community/iTunes?CategoryID=149

• When I try to access the Bluetooth program, receive error message: "Windows has stopped this program due to a Code 43 error.

  Original title: Code43 error (built-in) Bluetooth

  I have a new laptop (vaio) when I try to access the Bluetooth program I received information that Windows has stopped this program error Code 43

  that I understand not as a problem to update. I am running Windows7 Home Premium SP1. All solutions? (outside the deactivation, which I did. I realized the usual remedies IE. checked for driver updates, uninstalled and restarted without result

  Hi DerekWilliams,

  What is the brand and model of your system?

  You can try the following steps and check if it helps:

  Method 1:

  Try to run the corner hardware store and check the issue.

  Convenience hardware store

  For more information, see the article:

  Code 43: Windows has stopped this device because it has reported problems

  Method 2:

  You can refer to the computer or the device manufacturer's Web site and try to install the latest version of the Bluetooth drivers:

  For more information, see the articles:

  Updated a hardware driver that is not working properly

  Update drivers: recommended links

• Windows Defender - blocked startup programs

  Over the past two days, whenever I connect, windows defender appears and says it blocked a commissioning program. So I open windows defender and choose "show or remove blocked startup programs" I assume that the program that is blocked is showing on the screen. How can I remove the locked channel? Remove, disable and enable buttons are gray. I don't want to run it in case it is an infected file. The file is Digital Line Detection by Avanquest Software.

  Thank you.

  Here is some information about dlg.exe; http://www.processlibrary.com/directory/files/dlg.  Here's more information:http://forums.avanquestusa.com/aq/archive/index.php/t-4477.html.  As you can see, the creators of this program are known to have made Spyware in the past and that is probably why it is blocked.

  How did you get this program and why do you have this program?  It seems to me that it does not offer much that you can't with programs that cause fewer problems (if necessary at all).  I checked the site web avanquest and this program is not listed: http://www.avanquest.com/.  I also checked Phone Tools of BVRP (whose dlg.exe is supposed to be a part of):http://download.cnet.com/BVRP-Mobile-Phone-Tools/3000-2349_4-93370.html , but that seemed for mobile phones and brought him back to avanquest.  I could not find any information on the product (in addition, Tools of BVRP Phone does not list itself as compatible with Vista).

  If I were you, I would delete/uninstall this program.  It's not like you use (it is blocked) and you don't mention the functions you can perform you want to run, because he's not here.  Go to start / Control Panel / programs and features and see if you can find it under the names above, then right click on it and click on uninstall.

  If it does not appear, go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and run Autoruns and click all.  Search of dlg.exe or whatever it is, on one names program or product mentioned above, and when you find it uncheck the box to prevent it from start to start.  Check the entire list as there may be several entries.  When you're done, click OK and restart. Since it is no longer from the start, he should no longer need to be blocked, and I hope that will remove the message.  I would prefer if we could uninstall the program, but if it is not found, then we will have to be satisfied to prevent him from running.

  This will be the no Defender removes (except if it is uninstalled) and I can't explain why the buttons are grayed (are you logged on as administrator?).  But I think that the process described above may solve the problem.  If the message still appears, then I suggest you contact Support technique Avanquesthttp://kb.avanquestusa.com/display/4/search.aspx?tab=search and ask them how to remove it and why it causes so many problems.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows has blocked a file that I am trying to unzip

  I am trying to unzip a zip file and I get a message saying that my windows vista has blocked the file

  Please tell us the EXACT text of the error (including all codes) - he can help solve the problem.

  What is the full path of the zip file (where it is currently on your system)?  It can be in a place that has permission issues that must be addressed.

  What is the file type of the zip file (the extension to three digits following the point in the name of the file)?  Some file types can not be handled by Vista unpacking program.

  Maybe you can download, install and try the free program 7-Zip http://www.7-zip.org/ and it may have more luck have decompressed the file without being blocked (even if it depends on how and why he is blocked).

  Here is a link to a free zip repair tool if you need: http://www.diskinternals.com/zip-repair/ to check if your zip file is corrupt and can be repaired.

  I hope this helps and look forward to your answers to the questions here and above.  With these answers, we can help you much better.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.