Touchpad has lost some features

Similar Questions

• Large Format Officejet 7500 has lost some features in Windows 8

  I've recently upgraded from Windows XP to Windows 8 & downloaded lastest drivers. I lost the borderless printing function when printing photos.  Can anyone help?

  Hello

  Follow the steps in the link to fix the problem:

  http://support.HP.com/us-en/document/c03534433

• Loading magic jack I get an error: Windows Firewall has blocked some features of this program.

  Windows security alert...

  I installed MajicJack phone on the computer and created an Exception for MJ in the Windows Firewall Exceptions tab. However, when MJ loading an error message says that firewall Windows has blocked some features of this program. The message does not give me an option to unlock. What should I do as I already created an exception?

  Hello

  1. are you referring to the Windows Firewall or any other firewall?

  2 have you made changes on the computer before this problem?

  3. facing this problem with taking magic or any other application?

  I suggest you try the following steps.

  Step 1:

  If you use Windows Firewall, disable the firewall and check the status of the issue.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions? http://support.Microsoft.com/kb/283673

  Note: make sure that you enable the antivirus software, other security and firewall programs.
  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   

  Step 2:

  If the application works fine after disabling the firewall, turn on the firewall and check the status of the issue.

  If the problem persists, please check the Event Viewer logs and respond with more information to help you better.

  How to view and manage event logs in Event Viewer in Windows XP http://support.microsoft.com/kb/308427

• Captivate 8 - firewall Windows has blocked some features on launch

  I saw this problem written online, but have not found a solution.

  Is anyone aware of a?

  Whenever I run 8 Captivate, I get the dialogue "firewall Windows has blocked some features.

  In this case if I run as admin or not.

  Thanks in advance for your suggestions!

  Keith

  For anyone else interested, I found a solution in this thread: Firewall exception whenever 8 Captivate is started

  I just found this. Try at your own risk. But it seems to have solved the problem for me.

  Keith

• I've updated to Firefox, The Free Dictionary has lost some essential features, cannot get back them. The DFT now only works in English. What should do?

  I updated Firefox to 10.0.2 and lost the functionality of The Free Dictionary. I reinstalled TFD, but now it only works in English. Say I read a German Web page, highlight a Word, the dictionary will seek in the English Dictionary. Before that I had all the versions I needed, and the dictionary automatically in the right. And before that I could have the toolbar installed, now there is no option for this either. What should I do?

  Maurizio salute, I asked you to a problem with the free dictionary. I found the solution, which in fact was not technical. In case someone else has the same, that's what I did not understand: when I highlight a word in a text in a language other than English, the dictionary gives me an explanation in English, i.e. 'not found word', but when I then press 'Search', the dictionary connect in the appropriate dictionary. It works even in Chinese! So, problem solved. The dictionary is not as good as before, but still, it works. Best regards, Markku

• on my desk: Windows Firewall has blocked some features of Firefox public and private networks? What does that mean?

  I turned on my lap and a huge dialog box appears with the message above. I didn't know whether to 'Access' or 'Cancel' then just closed. Please explain.

  Firefox 36 requires the Firefox Windows to create new access rules, and Windows asks if you really want to do this.

  I do not think that these rules are necessary for the current version, but are designed to take account of the features provided in a future release, so you can cancel it just for the moment.

• After the removal of some components of Windows, I lost some features on my XP computer

  I recently tried to fix errors after upgrading to Windows Live, including the removal of some components of Windows (oops)!  Now I can't use Internet Explorer, I don't have a calculator or the original games...  I tried to restore the system to an earlier date and it does not work... or help?

  * original title - my OS is Windows XP Media Center period

  Hello

  · You receive an error message or error code when you access internet Explorer?

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• lost some photos after the system update

  Hello

  I did an update on my Mac for OS X El Capitan 10.11.6. After that, I realized that I had lost some of the photos that were stored in the iPhoto application. When I open an app (even if I use the "Photos" application), I can see only the photos that were taken with my iPhone (so the pictures that are on my cloud), but I can't view all the other pictures I've added to the library. I tried to look in the trash, but I couldn't find anything. I checked and I have two files in the folder 'Picture', called an iPhoto library and a library of Photos called. They are of different size, but they store the same pictures (when I opened one of the two app, they show the same photos). Please help me find them! I have not deleted so I can't figure out how and why they are no longer in the iPhoto application.

  Thank you very much

  ELISA

  Your question is not clear - you expect import photos in pictures to show too much of iPhoto? If it's not the way it works - iPhoto and photo each have their own separate library and it restricted in anything done in one application

  And iPhoto is a dead product and it would be better to win and use photographs because he has a future

  LN

• Satellite Pro A200 - hard drive has lost half it's memory

  I have a toshiba Satellite Pro A200 on Vista. Vista came preloaded and I not all disks for it. I got it from the new (Sept 2007). The hard disk is divided into units. Recently my C drive has filled competely and I now no space left (went 55gigs) I store some data in this drive. All my multimedia elements (music, photos, and other files) is in my E drive. I have to run C Cleaner whenever I start in order to have enough space for the operation of the computer. I also remove all but the last restore point in order to function.

  I am at my wits end and think I must have a virus or something. Is there a way to restore the computer to the 'new '? I have all my files backed up on an external hard drive, so I don't mind from scratch. Not keeping in mind I have no install discs as Vista came preloaded.

  Can anyone help? Please, I beg you!

  Hello

  If you don't have a recovery disk, you can order from Toshiba for the money. Otherwise, you can get copy of Windows and installed with the drivers of Toshiba (http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp)
  Then, you mentioned that hard drive has lost half it's memory, tell you if it was ok before but not available? Please check disk management, utility of the Panel. What is shown here?

• Time Capsule has lost the Internet connection and DNS servers

  I use a Time Capsule for Time Machine via Ethernet backups for a couple of years, use it in mode bridge taking its Internet connection directly from my router and connected in turn by Ethernet to my iMac. (Most of the time that I also had wifi off on my iMac and took my Internet directly via the TC Ethernet connection.) A few months ago I upgraded to El Capitan, and the TC has lost its connection Internet (flashing yellow). A few days later I drove back to the Yosemite (for other reasons - Mail had gone mad) to restore a backup of the TC and everything was fine again for a few months. It may or may not be meaningful I plugged TC yesterday to new laptop for my wife to support for the first time, and this laptop is running El Capitan. Since then, the TC has once more lost its Internet connection and DNS settings and is stuck on flashing orange. By clicking on the 'Internet connection' status alert, tells me that the TC is not a valid IP address.

  

  I have reset the TC, repeatedly and reconfigured but all without success. After consulting the other discussions, I also tried giving the unit an alphanumeric name with no spaces & special characters and change the IPv6 "Link-local" configuration only, but this did not affect the result. And I updated the firmware for good measure. Then I unplugged overnight and carried out a full power cycle the steps recommended here, restart the router, TC and the computer (and performed a factory reset on the TC, while the router & computer was turned off). After doing that, the TC has become undetectable by AirPort Utility, until I have reset reconfigured once again, he and ended up in the same place.

  It may or may not be important to mention the following:

  1 when you set the TC after a reset, I repeatedly selected the option of adding to an existing network instead of create a network, but the installation wizard who ignored each time.

  2. in the installation each time, this point, I shows me the following, which seems to suggest that there is a problem but don't say so explicitly:

  

  I would be grateful for any advice.

  Weird how everything's going well for a few years and then crazy when you have something will change.

  El Capo adds some network problems more... but something could be fundamentally wrong with the installer.

  Your current configuration, it is apparently bridged but cannot get an IP address. The address 169.254 is give it since it's self generated.

  You need to do a manual installation. It simply means the Assistant is unable for any reason to be your network so start over and do it manually of misfortune (wow, or also possible misery, woah being where you are now!) to go...!

  1. I need to know what modem you are connected. Make and model please?

  2. the most important. What is the main router on your network or a modem?

  I gave the edge to make manual settings a few times. Somehow my instructions for Yosemite/El Capo got lost... I'll try and hunt down them. In the meantime, the basic method remains the same.

  https://discussions.Apple.com/thread/6509420

  It is not so difficult... You just know where you're going before you start.

  Airtport Utility cannot find airport Time Capsule on one of my Macs 2009

• Some features not available on messenger

  Some features are not available for messemger

  For any questions about Windows Live Messenger, please repost to the Windows Live Messenger Discussion Group at: http://windowslivehelp.com/product.aspx?productid=2 where this product experts will be more than happy to help you with your problem.  Please include in your message it what features you think are missing.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Your computer has lost the lease to its IP address

  I am receving this error "your computer has lost the lease to its IP address 192.168.100.11 on the network card with network 002354763C address 18. Please help, thanks.

  Hello

  If you have a router, and you use its DHCP, connect to the router (see how in its manual) and configure the DHCP protocol to keep re-new assignments of intellectual property.

  If not, explain in detail the configuration of your network or to the Internet and its related features.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Do mac Pro book occationally delete files? Because I lost some of my files when I opened my MacBook

  Do mac Pro book occationally delete files? Because I lost some of my files when I opened my MacBook

  No, without your consent the computer will not delete arbitrarily files other than system files, that you do not normally have access.

• my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  Hi rog247,

  Thanks for posting here in Support of Apple communities! After reading your post, I see that your iPhone 4S shows 'No Service'. It is certainly important to have access to mobile data; I would like to help get this sorted out.

  Please follow the instructions here:
  

  If you see no Service or research

  If you see no Service or search on your device, or cannot connect to a cellular network or cellular data, follow these steps:

  1. Check your coverage area to ensure that you are in an area with a cellular network coverage.
     • If you cannot connect to a cellular network on your iPhone, make sure that the cell data is on in settings > cellular*. On your iPad, go to settings > cellular data.
     • If you travel internationally, make sure that your device is set up for data roaming. Go to settings > cellular > data roaming.
       
  2. Restart your iPhone or iPad.
  3. Looking for a carrier settings update.
  4. Update your iPhone or iPad to the latest version of iOS.
  5. Remove the SIM card and put it again. If the SIM card is damaged, or does not fit in the drawer of the SIM card, contact your carrier.
  6. Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.
  7. If you have another device, see if you can connect your business with her network to this place.
  8. Contact your operator for:
     • Make sure your account is active and in good and due form.
     • Make sure that there are no failures in your area.
     • Verify that your device is not blocked to receive cellular services and is set up with the right data plan.

  If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.

  If you cannot connect to a cellular network or cellular data - Apple Support

  See you soon!