Music and sounds of the game won't play; all other sounds work

Similar Questions

• No voice in the audio, only music and sound effects - while playing the movie in Media Player

  Original title: Media Player

  I get everything on trailers, but when I get to the movie there is no audio voice only music and sound effects, how can I fix it's on media player and centre

  Possible solution:

  After spending the afternoon to tackle this (troubleshooting, downloads driver updates, etc.) I just found out that my subwoofer cable is bad!  If I raise to create a good connection, the sound is fine... until I can replace it.  Then you can try it.  :)

• asphalt 8, I installed on my windows 8 core i3 laptop but the game won't start, he writes that the loading and it never finishes loading

  asphalt 8, I installed on my windows 8 core i3 laptop but the game won't start, he writes that the loading and it never finishes loading

  Hi Samuel,.

  To solve the problem with the application you have installed, you can run the troubleshooter for Windows app.

  Let us know if you need more.

• Music and sounds are coming through too fast and too sharp.

  Music and sounds are coming in my treble speakers too much and too fast. Looks like Alvin and the chipmunks. It happens on all sounds from a CD or the Internet. All diagnostics check out OK. It's Windows XP. Any ideas how to adjust the sound quality?

  Hello Jcbrewer,

  Thank you for your message.  Take a look at the information below which I copied from http://www.microsoft.com/windows/windowsmedia/knowledgecenter/mediaadvice/0067.mspx.
  Why my music sounds like chipmunks sing?

  Don't worry, little domestic rodents in Windows Media Player is not configured. Instead, the clock of your soundcard probably has a timing problem. To resolve this issue, try to reduce the level of hardware acceleration for your sound card by following these steps:

  1.	In Control Panel, open sounds and Audio devices.
  2.	In the Volume , in the settings area of the speaker tab, click the Advanced button.
  3.	In the Advanced Audio properties dialog box, click the performance tab and adjust the hardware acceleration slider to adjust the calendar clock for your sound card.

  Remember that, if your sound card supports multi-channel (5.1) audio playback, turn off hardware acceleration (moving the cursor of None) will cause the sound card to play all the audio multichannel stereo (two speakers).

  If you can't solve the problem by adjusting hardware acceleration, you can check with the computer manufacturer for an updated audio driver.

  Another possibility is that it could be a joke any.  You can perform a clean boot that will start the computer without programs 3rd party.  The steps are below:

  1. Click Startand then click run.
  2. Type msconfig in the Open box, and then click OK.
  3. On the general tab, click Selective startup.
  4. Under Selective startup, clear the following check boxes:
     • SYSTEM process. INI file
     • Process of VICTORY. INI file
     • Load Startup items
  5. Click the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  6. Click OK.
  7. When you are prompted, click restart.
  8. After the computer starts, start the program or game and see if the problem is resolved.

  If the problem is resolved, you can check in Add/Remove programs to see if there are any suspicious software that needs to be removed.  You can also check your startup programs in MSCONFIG.  To access msconfig, click on 'Start' > select "Run" > Type msconfig in the box and click on enter.  You will see the Startup tab, you can check all suspicious programs start at startup and remove them.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My music files have changed in WMA format in Windows Media Player, and now my MP3 player won't play them.

  My music files have changed in wma format in windows media player, and now my mp3 player won't play them.  can anyone help please.

  original title: Media Player

  Download and install WMA to MP3 Converter, then install it, you can get it here... http://www.WMA-MP3.org/

  Then select all the WMA files you want to convert, and then convert them to the MP3 Format.
  The reason why they are WMA is because when you ripped the files on the disc to your pc, by default, Windows Media Player is configured to save in the Windows Media Audio (WMA) Format.
  This default can be changed by opening Media Player and click on Tools > Options
  Then select the Rip music tab
  Format: select MP3 from the drop-down list.
  Click apply and OK.
  Now the next time you rip a CD on your drive hard it will be automatically saved as an MP3 file.

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• When I install FSX SP2, the box of the menu showing the plan chosen and also in the game, the graphics are all messed up (black, black with lines on the screen and so on) do not know what to do? I need help.

  I have FSX Deluxe. When I installed FSX SP1, it was all fine, but when I installed FSX SP2 graphics were messed up. So I uninstalled FSX SP2 and tried again, and it was the same thing. So I uninstalled FSX all together and reinstalled fresh and put on FSX SP1, it was going well until I put FSX SP2, the same thing happened again, messed up graphics.

  So I uninstalled FSX SP2 and updated my drivers graphic and tried again and the same thing happened.

  I need help please.
  Thank you

  Hi Mmarshall_1993,

  Welcome to the Microsoft Answers site.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) what operating system do you use?

  Method 1:

  Adjust display settings

  Many recent Microsoft games require a card video and monitor that can run a resolution of at least 800 x 600 in color (16 bit). Set the resolution of Windows display on 800 x 600 in color (16 bit), and then test the game. To do this, follow these steps:

  1. in Windows XP, click Start, point to settings and then click Control Panel.
  In Windows Vista, click on start to reduce this includes personalization thtype in the Search box and then click on personalization in the programs list.

  2. in Windows XP, double-click display.
  In Windows Vista, click display settings.

  3. click on the settings tab.

  4. move the slider of the desktop area or screen area slider to 800 x 600 pixel definition.

  5. in the Color Palette box or in the color box, click colors (16 bit).

  6. click OK and then click OK again.

  7. click Yes to accept the setting.

  Method 2:

  Adjust graphics hardware acceleration

  To adjust graphics hardware acceleration, use the method described for the operating system that you use:

  ·         Windows Vista

  1. click on start to reduce this includes this ima, type personalization in the Start Search box, and then click personalization in the list of programs .

  2. click on display settings.

  3. click on Advanced settings.

  4. click the Troubleshooting tab, and then click change settings.

  Reduce this includes this imIf that you are prompted for an administrator password or a confirmation, type the password or click on allow.

  5. move the notches on both Hardware Acceleration slider to the left of full (the parameter disable the accelerations of cursor and bitmap ).

  6. click OK and then click restart now.

  7. once the computer has restarted, test the game.

  ·         Microsoft Windows 2000 or Windows XP

  1. click on Start, point to settings and then click Control Panel.

  2. double-click on display.

  3. on the settings tab, click Advanced.

  4. click on the Troubleshooting tab.

  5. move the notches on both Hardware Acceleration slider to the left of full (the turn off all cursor and advanced drawing accelerations setting).

  6. click OK and then click OK again.

  7. test the game.

  Method 3:

  Check or turn on Direct 3D

  To check or turn on Windows XP Direct3D acceleration, follow these steps:

  1. click on Start, click run, type dxdiag , and then click OK.

  2. on the display tab, verify that all DirectX features are enabled. If all the features are disabled, click enable next to the feature.
  Note If some DirectX features are unavailable, verify that your video card meets the minimum requirements.

  For more information, follow the below mentioned articles.

  How to resolve display issues in Microsoft games

  http://support.Microsoft.com/kb/263039

  The Flight Simulator X game display flickers and are damaged on a Windows Vista-based computer that is connected to multiple monitors

  http://support.Microsoft.com/kb/933590

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Just installed via Steam Fable III. Just after authentication and signature in the game finished

  Just installed via Steam Fable III. Just after authentication and signature in the game finished. Solutions?

  original title: Fable III does not start yet. Solution?

  Hello
  You can try to fix the game and check if it helps. If the problem persists then try to uninstall and reinstall the game.
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

• Lost documents, music and photos on the start bar

  Right now, when I try to left click on Documents, music and pictures (located to the right of the start menu) nothing happens.  For the moment, I deleted the folder music and images.  The documents folder is always present.  When I just lick on a folder, and then open the properties, the Properties window opens.  There is nothing is not displayed.  No file name, no disk space used, not location, and additional tab.  How can I fix without having to reinstall windows?  Thank you

  Hi tip10788,

  1. did you of recent changes on the computer?

  2. What do you get if you right click a folder in the start menu?

  To recover Documents, music or photo icon in the start menu, you'll need Customize Start menu settings.

  (a) open the bar of tasks and properties of the Start Menu by clicking Start , clicking Control Panel, appearance and personalization, and then clicking the taskbar and Start Menu.

  (b) click the Start Menu tab, and then click Customize.

  (c) in the Customize the Start Menu dialog box, select the options in the list you want, and then click OK.

  Customize the start menu

  http://Windows.Microsoft.com/en-us/Windows-Vista/customize-the-start-menu

   

  Check if you can access personal records of its original location.

  C:\Users\

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I DELETED MY PDF FILES AND AGAIN USING THE RECOVERY SOFTWARE I FIND ALL MY FILES BUT NOW WHEN I OPEN FILES THAT IT SHOWS (THE FILE MAY BE CORRUPTED OR NOT SUPPORTED FORMAT.NO HOW CAN I OPEN THE FILES.) ALL OF THEM ARE MY DOCUMENTS IS VERY IMPORTANT. PLEAS

  I DELETED MY PDF FILES AND AGAIN USING THE RECOVERY SOFTWARE I FIND ALL MY FILES BUT NOW WHEN I OPEN FILES THAT IT SHOWS (THE FILE MAY BE CORRUPTED OR NOT SUPPORTED FORMAT.NO HOW CAN I OPEN THE FILES.) ALL OF THEM ARE MY DOCUMENTS IS VERY IMPORTANT. PLEASE PROVIDE ME WITH A

  Deleted file recovery can recover incomplete files, i.e. the part of these files may be missing.  Recover deleted files is much more reliable if recovery of a backup, instead of using recovery software.

  These things depend on the operating system and the file system.

  One thing, you can see: open one of these files damaged with a text editor, and then make sure that the constant % PDF is somewhere in the first 1024 bytes.

  PS please do not post ALL uppercase; It is very difficult to read!

• My copied DVD won't play in other dvd machines

  I can make copies of DVDs, but they won't play on other dvd machines (that is, with TV etc.).  Will play only on this computer that copied the disc.

  I can make copies of DVDs, but they won't play on other dvd machines (that is, with TV etc.).  Will play only on this computer that copied the disc.

  =================================
  How you copy DVDs?

  You copy personal home-made DVDs
  or are they protected commercial DVDs copy?

  If the DVD is not protected against copying... What follows
  Freeware works for me... maybe it would work for you:

  First... just a suggestion... using a slow burn speed
  produces a more reliable copy...

  The freeware ImgBurn can create an ISO Image
  that allows to burn copies. Once you have the
  image created... you can use it to burn as many copies
  as you need.

  FWIW... it's always a good idea to create a system
  Restore point before installing software or updates)

  Click left on the green circle with the white arrow... it is said
  «Click here to download»

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (The download is: SetupImgBurn_2.5.7.0.exe)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorials may be worth a visit:

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

• The connection to complaints.donotcall.gov while the page is loading. "All other pages load fine. Loads of everything perfectly on I / E 8

  When you connect to the 'do not call site' to complain I get the following message "the connection to the complaints.donotcall.gov was interrupted while the page is loading." All other pages load fine. Loads of everything perfectly on I / E 8.
  I started Firefox in safe mode and got the same results.
  Disabled the firewall and virus programs, no help. I have 2 new computers about 2 years, both have the same problem with version 12.0

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file

• Crack speakers and buzz only with online video. In charge of the music and sound of the DVD fine

  I have a HP 15-r011dx laptop with windows 8.1 when on youtube or videos CNN, the speakers carack and pop. The ads CNN play before the story are very good as a DVD or my music loaded. I relly don't want to reinstall. I've had the computer for 3 weeks and I don't know if she was there from the beginning. I have updated all of HP, including the BIOS and tried another browser and adjusted the volume levels. Windows has made updates.

  Hello

  I have some other ideas, but it becomes more an environmental issue. Something (I couldn't say what) is causing interference with the audio. As this occurs only with online video/music and not anything ran computer laptop or DVD directly, this indicates that it would be something to do with the Internet.

  There might be questions about Internet bad signals via wireless or bad connections to Web sites. You have problems with streaming?

  You can also try to connect to your network with an Ethernet cable, to test. The question is perhaps more wireless streaming. Again, this could indicate some sort of interference.
  You can also test your router with the nearby. If you notice the problem disappears in some places but is apparent or worse in others. Check to see what's around, other devices may cause the buzz.

  Have you noticed problems in streaming video and audio on other capable network devices (iPhone, Desktop, etc.).

  The last possibility, again it goes back to poor/bad Internet could be the router itself. If it is older, then it might 'go. '

  I know nothing of the above are direct troubleshooting suggestions for the laptop, but two doing exactly the same thing is very rare. More often then not it is and indication that "something else" happening. The idea and the tests above could help determine what exactly will.

  I would like to know how it all happens.
  Thank you.

• Why is - my music and Sound distorted on my h8-1020?

  Hello

  I noticed several times during internet browsing or listening on itunes, the music will momentarily be distorted.  If I watch a movie on my PC, the strain will also hit not synchronized sound with video.  It can get really annoying.  Also, during the game Battlefield 3, distortion will occur from time to time and make the game stutter for a while and continue as usual.  Any ideas why this happens?

  I'm running on a Pavilion h8-1020 HPE intel Core i7 - 2600 S and an EVGA GeForce GTX 560 graphics card upgrade.  Nothing is Overclocked and that the system works McAfee Total Protection and Iolo System mechanic as the only programs running with the problems mentioned above.  Also, I was getting distortion before even the video card upgrade.

  I get no error message, but it's really starting to get annoying. Any help would be greatly appreciated.

  You might have a HD audio conflict. Very well known if you install of Nvidia HD audio drivers when using onboard audio. Do not install the Nvidia HD audio drivers or disable them in Device Manager.

• Music and sounds spoken turns on there is not a program open to cause this. Impossible to turn off

  Recently, as I am working on a Web site or watch a program on Hulu, TV.com, lous or talk music occurs to the point that I can't hear the selected original program.  No other program has been opened and when I check to see what else can run I can't find anything.  How do I don't disconnect it?

  Thank you very much

  Marty

  Hi Marty,

  ·         What browser do you use?

  ·         It happens only while accessing the Web site specific?

  It seems that the sound is either due to some application is running in the background or the website you are browsing is the cause.

  I suggest you follow the methods given and check if it helps.

  Method 1

  I would say that you can check in the task manager that there is that one instance of the web browser is running if you browse a Web site.

  Method 2

  In addition, you can also configure the machine in a clean boot state, and the check is that the problem persists.  Follow the given article to set up the machine in a clean boot state.

  http://support.Microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135.

  Hope the helps of information. Please post back and we do know.