Capture the Grand Total & calculations on it.

Similar Questions

• Order form does not update grand total calculation until I have indicate a number on the next line.

  I created a purchase order with a "quantity" column, a column of job description, a unit price column and a point $ column total. I've set the total column of $ point to calculate automatically once a quantity and unit price entered, and it works immediately once the unit price and quantity entered. But my grand total at the bottom of the total column $ is set to calculate all the lines of total $ point, but the total general don't not updated to reflect the $ total for a given line (e.g. line B) until I have begin to type a number for the next line (e.g. line C). So, I always end up having to create a line of extra reserved space with a quantity of 0, just to get my total general to update. Is there a way to fix this?

  It is most likely a problem with the calculation of field order. You must ensure that the total is calculated after row grand totals.

  This can be set in form editing mode, under the order of computation of Set field - other tasks.

• How to display the total of the group to the grand total

  Hello friends,
  I'm a grouping column and showing the group totals. I want to capture these totals n view as a total general. I know that we can draft total running, but can someone tell me the exact syntax
  Thank you

  You can try using the syntax below:
  

• Average for a quarter and the grand total amount

  Hi all

  I have a report (PivotTable) in which I view information about sales. I have category, subcategory in the rows. Quarter of the year in the columns. Sales are loaded at the day level in the fact table. My report must indicate the average quarterly sales. That is to say that all sales per month should be added to the top and sales 3 months should be on average to get the average of quarterly sales.  We must show the total sales for each category sub. We must also show the % of sales for each subcategory with a category.

  I did the following,

  1. the aggregation of the column in the SPR Sales is basically

  2. in the report, I shot months in the criteria and which excluded the pivot

  3. I changed the aggregation (for total rum) for the SUM of criteria-> the column formula

  4. I changed the AVG aggregation to view measures pivot

  5. I have reproduced the measure to display the percentage of its sales

  6. I enabled total in the lines.

  Everything works well except the value of the subtotal of sales which gives me the average of subcategories at the level of the category, instead of this, it must be a sum.  The % of total is correct where he gives 100% for each category

  Please help me reach the sum to the total sub level

  Thank you!

  Concerning

  Deepak

  Hey, I just fixed the problem myself.  The solution was to write the formula as AVG (sales per quarter, category, subcategory), then change the rule of the aggregation in short.

• Unable to do the Grand Total in a Pivot table view in OBIEE 11 g

  Hello Experts,
  
  I'm quite new to OBIEE 11 g
  
  I've created a report and wanted wise ranks. Total single general to OBIEE 11.1.1.5 version. While the sum "After". I get an internet Explorer window pop up saying the following.
  
  
  "Are you sure you want to nevigate leave this page?
  
  The changes u made on this item has not been saved. Click Cancel to return to the editor, where you can save the object.
  
  Press OK to continue or Cancel to return to the page.
  
  
  I tried the two option, but no options work.
  
  Please give me a solution on priority because the customer is on the head.
  
  Thanks in advance.
  
  Niraj

  Hello

  Yes.Best how to do it outside of the browser. close this thread-mark and mark as answred above my answer.

  Thank you

  Deva

• Help! Grand Total Script errors!

  Hello

  I taught myself create 33 PDF forms in Adobe Acrobat LiveCycle Designer 8.2 for my business. I can add simple totals on a table, but I have problems with the Total field general. In Excel I could fulfill this function in less than a minute, but for some reason I was sent on a wild goosechase to calculate a Total general simple in the designer. I have virtually no knowledge of FormCalc or fJavaScripting - only scripting I know is from my experience with Excel.

  That's what I did (copy of the attached table form):

  Link names:

  Qty unit price Total price

  ------------------------------------------------------------------------------------------ --------------

  quantityA unitpriceA totalpriceA quantityA + unitpriceA (this works)

  quantityB unitpriceB totalpriceB quantityB + unitpriceB (this works)

  quantityC unitpriceC totalpriceC quantityC + unitpriceC (this works)

  quantityD unitpriceD totalpriceD quantityD + unitpriceD (this works)

  Grand Total calculation: sum (totalpriceA + totalpriceB + totalpriceC + totalpriceD)

  The error I receive:

  Script failed (language formcalc; context is .form1 form [0] of xfa [0] [0]. #subform [0].) Tableau7 [0]. Row5 [1]. GrandTotal [0]) script = sum (totalpriceA + totalpriceB + totalpriceC + totalpriceD)

  Error: the "totalpriceA" accessor is unknown.

  I also tried to copy / paste this into the script editor, but that didn't work either:

  calculate the <>

  < script contentType = "application/x-javascript" > this.rawValue = firstfield.rawValue + secondfield.rawValue; < /script >

  < / calculate >

  Help, that's all what I have to do to finish this work!  Thanks a lot for your help!

  GIA

  The problem is that the GrandTotal field that you calculate is not in the same context as the other fields so your path, you must 'path' for them. See my attached update example. A good way to ensure that this does not happen again is to put the cursor in the script editor where you want the object reference to appear. Now, hold down the ctrl key and point to the field that you want to reference. The mouse pointer will change to a V. Now click on the mouse and the appropriate field reference will appear where your cursor was.

  Paul

• OBIEE answers - excluding lines without affecting the overall totals

  Is there a way to exclude lines after grouping in the report to OBIEE answers but without affecting the total general?

  Example:

  Product group real Plan

  --------------------------------------------------

  Furniture 50 100

  200 100 devices

  Tehnology 300 0

  ------------------------------------------------------

  400 150 total general

  Lets say we want to remove the display since no sales technology was made, but we want to let the expected value.

  Table should look like:

  Product group real Plan

  --------------------------------------------------

  Furniture 50 100

  200 100 devices

  ------------------------------------------------------

  400 150 total general

  When you use the steps in selection, total general will be modified (reduced to 200)

  Is it possible to exclude from the ranks (Group) of the analysis, but to keep its values in the grand total?

  If your "total" is produced by OBIEE when allow you it in a table view or rotate view not really.

  Look at this static total without affecting the filters

  He asked exactly the same (and some possible solutions are stationed there).

• How to do Grand Total for each subtotal groups

  Hi Experts,
  
  Version: Oracle BI Publisher generator of template for Word 10.1.3.4.1
  
  The report must be grouped by organization and by Source within the Organization
  
  For every Source that I have group by subtotal in Template.I want to make in the last part of the report, for example below.
  
  Please help me!
  
  
  | Organization | Source | Post the amount.
  |----------------------------------------------------------------
  | Midwest (XX). ABC | 10.50 |
  | Midwest (XX). DEF | 10.555 |
  
  | Total general for the report. $21,055 |
  
  
  Thank you
  Sandy

  I set the Grand Total by your request. Grouping in your original model code was incorrect. I fixed it and sent it to you. Take a peek inside.

  Thank you
  Bipuser

• Grand total in PivotTable

  I have a report based on the possibilities with a Pivot table view (sales stage and the name of the account in the section of line), recipes, etc., in the measures... Nothing under section, pages...
  Client asked for a total... I ve icon click sum in the lines... (sales stage) and I don't get the totals by sales stage... Unfortunately no grand total is displayed...
  Pls I'm missing something?
  TXS.
  Antonio

  Grand Total of lines is under the heading subject lines and then click the function button and then select the option after that it will then display the Grand Total

• Total general &amp; colors of the line Total

  Hello
  
  I am facing a problem with the total colors. I want to change the color of the Grand Total Total yellow line & Rose, respectively, but the problem is that I can only change the color of the column by groups which is 'Measure' & 'Label' that is there when you click on the sigma sign in the view table. Can anyone help to be by changing the color of the label changes only the color of this column while columns inbetween color Gets the default column.
  
  Help, please

  Hello

  Table views can be achieved with the pivot also...
  Your problem is solved... just pivot try... and report back...

  Thank you & best regards
  Kishore Guggilla

• I have a total of cells which can go up to any amount.  I also have a Grand total of cells using the total amount of cells, BUT it must be a total which is &lt; = 20

  I have a total of cells which can go up to any amount. I also have a GRAND total of cells using the total amount of cells, BUT it must be a total which is < = 20.  So in other words. He TOTAL = 31 total can only = 20.   If the TOTAL = 8 total would equal 8.

  Thank you!

  Custom calculation script for "GRAND total":

  var total = + this.getField ("TOTAL") .value;

  Event.Value = Math.min (total: 20);

• Hey, I was wondering if I could buy the Photoshop and Lightroom plan for $9.99 and single-app purchase of Premiere Pro under an Adobe ID for a grand total of $ 29.98/Mo + tax. Is this possible?

  Hey, I was wondering if I could buy the Photoshop and Lightroom plan for $9.99 and single-app purchase of Premiere Pro under an Adobe ID for a grand total of $ 29.98/Mo + tax. Is this possible?

  https://creative.Adobe.com/plans

  Yes, you can use the same Adobe ID to subscribe both photography at US $9.99 plan and plan of the only application currently at US $19.99.

  .

• How to change the font, color line, column and Grand Total labels in PivotTable

  Hello Guru

  Can you get it some one please let me know how to change the look and feel of the reports in Pivot table using css files. I want to have the dimension and the measure to be of different color columns and grand total different color. I want to achieve for all pivot table reports instead of manually change each report so I want to do in css files.under s_SRIKI\b_mozilla_4\views.css I've seen a lot of options but nothing has worked. So can you please exactly tell what class we need to change to make changes. Thank you!!!

  Thank you

  SR

  For values

  . OORT {}

  text-align: right;

  vertical-align: top;

  color: Red;

  }

  For the product if you got hyper link

  Code OOB is

  . PTL {}

  color: #039;

  text-decoration: none;

  cursor: pointer;

  }

  If brand aid

• Can we change text "Grand Total" in the analysis of OBIEE11g

  Hi all
  Can we change "Grand Total" text with other text in the analysis OBIEE11g.
  
  Thank you
  Archie

  Yes, you can. When you apply the summation, then you have an aption to change labels. Give your own text it

• Running Total Grand Total of the columns of the report BEEP

  Hello
  
  I was getting NaN on my totals using the set_variable/get_variable below:
  <? xdoxslt:set_variable ($_XDOCTX, 'VAR1', sum (ssGroup))? >
  
  <? xdoxslt:get_variable($_XDOCTX,_'VAR1')? >
  
  I also need help on getting my corrected where grouping the following grouping:
  
  ssOwnedBy
  -ssImageType
  
  It must be grouped by ssOwnedBy then ssImageType and Totaled by ssOwnedBy and a Grand Total at the bottom.
  But the problem is that the ssImageType shows several lines, where it should appear only once shown below:
  
  FULLTEST < ssOwnedBy >
  -Claim 1 2 1
  -ME 2 1 3 package
  -2 1 3 passive patient
  Total 5 4 7
  
  DCA0970 < ssOwnedBy >
  -ME 1 3 2 package
  1 3 2-total
  
  Grand Total 6 7 9
  
  Can someone please?
  
  Thank you

  Can you send me the template RTF and xml to [email protected]? I can take a look and try to help.

  Thank you
  BIPuser