Capture using the video camera software

Similar Questions

• Satellite P300 - 19 p unable to capture audio using the Chicony Cam software

  Hey,.

  I have recently upgraded to windows 7 from vista and since then I have not been able to capture audio with the software assistant camera.
  I tried to uninstall and reinstall, repair the program, change the audio settings, running in compatibility mode, I've practically exhausted all I can think about.

  Can anyone help at all?

  Marc

  Toshiba Satellite P300 - 19 p
  Windows 7
  32-bit operating system
  PSPCCE

  (if any other information is needed then please ask me)

  Hello

  You mean that you are not able to record audio by using the internal mic.
  Is this good?

  In your case, I recommend to check the audio device inside the camsoftware settings.
  In settings-> audio tab (last tab), you will find the necessary adjustments.
  The audio peripheral field must contain the microphone (2 unit high definition Realtek) and the audio volume option must be set to the max position (right).

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• Reinstall the Web Cam software

  My web cam software/driver just mysterious disappears from my hard drive and I can't reinstall it unless I have reinstall the OS.  Is there another place I can get a copy of the web cam software and the driver so I can use my built in webcam?  I don't know what triggers it.  I just noticed that is no longer available when I go to the for use and Manager of my web cam says please plug in a supported device.  Any help would be appreciated.

  Hello

  Welcome to the community.

  Visit this link to download and install the Dell Webcam software.

  NOTE from the ADMIN: Broken link has been removed / replaced this post by Dell >

  -Press download and save.

  -Extract the file and run the installer.

  Hope this helps,

• When you use the 3D camera tracker, how can I insert an image instead of / on top of a solid?

  I'm just learning how to use the 3D camera Tracker feature.  I wanted to show what would look like a development project proposed along the coast and managed to get four cubes, representing four houses, appears in this video:

  Save our shores Gloucester: the back Shore, now with Mr Court! -YouTube

  Each of these cubes consists of four solid singles.  Effective, but not realistic.

  I would now like to do a similar thing for another construction project.  But for this project, the developer has some renderings of high quality that will look like the building, and I would like to insert these images in my video, rather than repeat my cubes of Day - Glo.

  I can't find a tutorial that shows how to do this, maybe because I did not come to the expression of right to describe.

  How can I achieve this?

  Thanks in advance.

  Just add your solids as placeholders and then add the image to the model and make the 3D layer. Now, hold down the SHIFT key and make the solid placeholder the parent layer of the 3D image. Now the SHIFT key will skip the image layer to the exact position of the solid. Then, simply adjust the rotation and scale. Then you remove the placeholder in parenting will disappear.

• When I'm not able to use the video stream on the BBC website.

  At the same time, I was able to use the video stream on the BBC website. I am more able to do. However, I use the video streams on other news sites.

  If the videos are Flash videos, you have disabled an option in Flash preferences to not allow sites to store Flash cookies on your machine. Made BBC videos in Flash are expecting to be able to store cookies Flash, so videos can not work with this option off Flash.

  Go to Storage Global Flash Settings Panel which serves as Adobe/Macromedia site and check the box «Allow third-party Flash content...» ", where you can then manage the sites you have already visited. You will need to reload the page from the BBC after you change this setting.

• Runtime error on the desktop - no error of birdthrowing comes from the video card software

  Original title: graphics card error I guess that

  computer is turned on after 15 minutes, run-time error is an error right when I say he sometimes makes the desktop icons does not reset, no birdthrowing error is from the video card software
  How can I solve this problem

  name: Toraman Uygar

  Hello

  • What is the full error message that you receive?
  • How long have you been faced with this problem?
  • What were the changes made before the issue occur?

  You can check this link:

  Windows XP restarts unexpectedly or restarts when you shut down the computer

  http://support.Microsoft.com/kb/320299

• Can I use the HP Director software (WinXP) on my laptop HP G62-340US (Win7) with HP PSC 1510xi?

  Can I use the HP Director software from my Office WinXP (HP Pavilion 325c) on my laptop HP G62-340US (Win7 64 bit)?

  If so, the version of the XP software will work on my Win7 64 bit system?

  I really liked the HP Director functions when I used it on my desk.

  Maybe... Can I use my discs backup or restore of my office to install more software HP Director on my laptop?

  I found my answer!  Director of HP has been replaced by the HP solutions Center - which I installed it and it works.  However, I prefer the interface on the HP Director than the Solution Center.

• It is possible to reinstall Windows 7 using the Windows 10 software, in which I would buy and use?

  Original title: problem of Installation of Windows 7.

  Hello

  Recently, my computer has not been doing any internet access and I thought to reinstall Windows 7.

  But I can't do that because I lost the disc and key product :( (shock)

  So I thought I would buy a new one, but with Windows 10.

  So I have two questions:

  It is possible to reinstall Windows 7 using the Windows 10 software, in which I would buy and use?

  If I decide to buy online, some say it's downloadable, how can I reinstall it without using a CD?

  Hello

  Recently, my computer has not been doing any internet access and I thought to reinstall Windows 7.

  But I can't do that because I lost the disc and key product :( (shock)

  So I thought I would buy a new one, but with Windows 10.

  So I have two questions:

  It is possible to reinstall Windows 7 using the Windows 10 software, in which I would buy and use?

  No, Windows 7 and Windows 10 require unique product keys and their respective installation files.

  If I decide to buy online, some say it's downloadable, how can I reinstall it without using a CD?

  Windows 10 is available as a digital download:

  Buy Windows 10 family/professional edition

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• If I create a form using the free trial software, will I be able to use and access the form, after the trial period is over?

  If I create a form using the free trial software, will I be able to use and access the form, after the trial period is over?

  Yes, you can access the project that you created after the trial is over, but you need to back it up.

  Concerning

  Stéphane

• 6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash.

  6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash. The files are: DK5A0243. CR2

  Lightroom 6 trying to copy pictures to a different directory than what is Lightroom 5. That's why you have the problem.

  You can change the directory where you are teaching LR 6 to place photos, or change the permissions on this directory to read & write.

• How can I add a link using the adobe reader software?

  How can I add a link using the adobe reader software?

  Hi johnny05,

  This isn't something you can do with Adobe Reader. To edit a PDF file, including adding a link, you must use Acrobat. We invite you to try Acrobat DC for 30 days; You can download a trial of this page: Download Adobe Acrobat free trial version | Acrobat Pro DC.

  Best,

  Sara

• Hello my name is jose and I would like to know how can I use the adobe CAMERA RAW bridge because the use of bridge and the desire to open a raw image of the camera, I get a message that says: BRIDGE HAND aplicaion NOT ACTIVE. BRIDGE REQUIRES THAT A PARTIC

  Hello my name is jose and I would like to know how can I use the adobe CAMERA RAW bridge because the use of bridge and the desire to open a raw image of the camera, I get a message that says: BRIDGE HAND aplicaion NOT ACTIVE. BRIDGE REQUIRES THAT A PARTICULAR PRODUCT HAS STARTED AT LEAST ONCE THIS FEATURE. I wonder what that means?

  I use a 64 - Bit lapto operating system (windows 7).

  Thank you

  my email is: [email protected] If you send me the answer to my query

  You must activate Photoshop.

  Mylenium

• When you use the adobe reader software

  When you use the adobe reader software, I can't open .pdf files to view using IE 10

  Adobe PDF Reader below your add-ons, and it is enabled?