Cara aktifasi p [roduk key

Similar Questions

• Some keys on the keyboard for Satellite A200 do not react

  Hello to you all.

  Recently, I had serious problems with a few keys. They do not react when I press on them. Oddly, enough it happened one day where everything worked perfectly. Currently a non-flexible solution (: @) is a mix of keyboard and Vista on-screen keyboard. I have spilled something on my laptop that I take great care of it. Keys not working do not are:

  K k
  U u
  I have I
  M m
  J j

  7
  8

  ,
  *
  

  Up arrow
  Arrow pointing down

  I also remember the day, this problem occurred (and since then, every day when the laptop boots) in startup screen logo is continuous-interminnent beeps. Alsowhen Office appears and then press 'Start' (Windows logo) I see constantly writing in the prompt search (under "all programs") and that if I press the right arrow it wll not stop. Any ideas? I guess from a driver issue... I hope someone help...

  P.S.:strangely (with the exception of added value package) I can't update my Toshiba laptop (they all fail with an error). First, I do the update of the BIOS?

  Hi Herc,

  The description of your problem doesn't quite sound as if your keyboard has developed a fault, particularly in failing the grouping of keys held. If you have access to a USB port on the keyboard I sugest you try and see if you get the same problem.

  If your A200 is still covered by warranty, then I suggest that return you it to a repairer approved for repair. If your warranty has expired so fortunately replacement keyboards are not only expemsuve and are fairly easy to replace, just try to Google for a suitable provider.

  I don't think that your problem is related to software or drivers

  Kind regards

• BlackBerry 8130 Alltel Smartphones and Kit car Bluetooth from Nissan

  Help! New Nissan Altima with handsfree Kit.  I am able to pair without problem, to make and receive calls without a hitch.  The directory downloaded with ease.  The problem is when I use the phone with the car kit after I get out of the car, the phone hangs, keys do not respond and I have to do a battery pull to reset the phone.  No problem until I use the phone in the car (with bluetooth kit).  Any help or suggestions are appreciated.  I have the latest OS (4.5.0.89).

  Problem solved: I went to the Alltel store and they should do a manual disconnect the phone before turning off the car, it seems to work since I put the Bluetooth icon ther on the first page of my phone it seems to work fine without having to disconnect manually.  I do not understand why it works now, but it does.

• ProBook G2: Installation of Windows ProBook problem

  My apologies if this has already been posted, but I searched for the most relevant posts that I could find.

  I am trying to install Windows 7 on this unit, but it stops car detecing CD external & key USB once I have this boot from the BIOS.

  Is there no workaround available for this solution?  I don't have an external device to CD available.

  Any help would be greatly appreciated.

  It's interesting...

  Try to convert the installation to a USB flash drive installation DVD and run this tool.

  There is a readme file on the link for the use of the tool and how to convert the DVD into an ISO file to use on a flash drive.

  Must be run on a PC with W8.1 or W10...

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

• Uninstalling HP Win 8 games

  Hello

  I went to the apps page in Windows 8 and by right click on HP games gave the possibility of unistal. I did, but then what he removed the tile of the page he has not deleted the games. Could someone tell me please how to get rid of them?

  I know they are always there as any (the Finder of files and folders) shows them, but I don't know if it's enough just to remove the files and folders that everything appears.

  Thank you Alex.

  Alex,

  Thanks for the information on the roll forward.  I don't have a system right now to experiment; I have no memory that I've seen the results you describe - it's been a while since I used a backup to roll forward - it is possible that I saw the same thing and I just around it.

  You must remove it as you think, it's good for your situation - either in unstalling games like Apps, if they arise as such - or by deleting the relevant folders with the names of the games on them.

  I do not use any software to track files.  Apps / games on my system Windows 8 appears after using the search function to clear them out in the open.  If you do not see the 'games' when you try to list them, but you don't see many files associated with 'games' apps, then you can decide what is best.

  I have a 128 GB SSD in my 2 X and it fact want to fill easily.  I got around it by using a six way hub and export my personal programs, photos and others to the external USB.  The Center has its own power supply.  I care about this: USB key backup for file history USB Ethernet, a stick of Photo-sauvegarde and hub USB 4 smaller ports used for travel.

  I use the hub 4 ports smaller and secondary has always two of the four main USB sticks attached (for files, that I do not do), plus the unifier of the USB for my external mouse.  When I travel, I take along the smaller USB hub and exit the main hub at home, to sacrifice the file history and Photo-sauvegarde sticks.

  It seems that a lot of work (two nodes and several USB drives). It works well for what I want to do: clean up the X 2 and store a minimum of data and personal files on the system.  If she will continue to work in the long term remains to be seen - I can change all around.  The smile.

  • I do not recommend that you at least do a full backup before you delete the files in case something happens on the side.
  • You can also (or alternatively) create a Restore Point if you think that this will be enough.

• I have 2 accounts admin and want one removed. Don't let me do one, but not the other?

  My Admin account, that I had from the beginning which is password protected and the Moose is can be removed.

  The second admin account that has been created and has no password can be removed... just the origanl one maybe?

  Has always been my understanding that you should always have at least two accounts on your system administrator.

  As a regular very knowledgeable of this forum has compared to him, it's like having a car with a single key, what do you do if you lose this one key? Basically you're toward the top of the proverbial Creek.

  It's the same with only have a single administrator account, what should you do if your admin account is damaged?

  My thoughts are that it is much better to prevent than cure.

  Kind regards

• Install Windows 8.1

  I have a HP ENVY 15 t-j100 Quad Edition CTO Notebook computer Touchsmart (ENERGY STAR)

  I messed up my hard drive with EaseUS Partition Master and it erased everything on my hard drive. I got it together to clone, but it has erased.

  My goal was to clone my old drive c: on a new hard drive. Both are SATA hard drive.

  Now, I have a laptop with no installed Windows 8.1.

  So I went to the Microsoft site and downloaded Windows 8.1 and would make a boot USB Flash drive and when I entered the Windows of my HP laptop key, dismissed. So I used a key purchased from BestBuy Windows 8 disc. Microsoft has accepted that the key and when I installed the new HARD drive on the laptop and insert the USB flash boot drive and started to install Windows 8, it rejected the key and said that my key does not match the key on my motherboard, the key that is embedded in the ORGANIC menu. So I could not install Windows 8.

  So, the next thing I thought was to clone my dekstop 8.1 Windows on my new drive hard, then when I boot in Windows 8.1 of the laptop that I would change my key to victory than my laptop key of embeded.

  I used EaseUS Todo to clone my C: drive to the new hard drive, and it was a successful and identical copy.

  Then I put the new clone drive in my laptop and it tells me to install an operating system.

  I checked the setting of my BIO and his game to boot from a hard drive.

  So I contacted EaseUS Todo and spoke with a technical support for more than 1 week now and they don't know why my laptop won't boot from the new drive of clone.

  I have no restore options I did the laptop.

  I contacted HP support and they tell me that they cannot help me to activate Windows this fall on Microsoft.

  I contacted Microsoft and they tell me that they cannot help me install Windows as it falls on HP.

  The problem is that I can't install Windows 8.1 car his rejecting my key Windows 8.1.  When I try to use a different key of Windows 8, it rejects too because he says that it is not the same thing as embeded in my Bio.

  I ended up installing Linux Mint 17 which is ok, but I'd rather have Windows 8 back on it.

  Is there anything else I can try to do?

  Hello

  Well, I said game/recovery media which means can be a set of DVD or USB key. Ask your USB key.

  Kind regards.

• Not able to find the backup recovery of KeePass

  I use KeePass to manage passwords. I just finished installing a SSD that has less capacity that made the boot partition, I started with that. To reduce the boot partition to fit on the SSD, I moved downloads and user data files to a partition on a hard drive. I made the registry changes required and tested that the system now handles these types of files correctly. Now, all that is good, but somehow in the process, I moved the KeePass database to a location where KP does not.

  I made backups, so I have the file database for KP. My problem is that I was not successful in getting the application and the database to do their thing together. I tried an import operation, but she didn't (don't know why). I was unable to find options to change the path to the database in the program options. They might be there, but I could not find them.

  If someone has experienced this or similar problems with KeePass and perfectly recovered of the database so that it would work KP, I be grateful to know how they did it.

  The cause of my problem was found and the problem solved.

  My problem is that the Composite master key stored in the database had no space to the right. However, I entered a trailing space over and over again without realizing it.  On another forum, I was challenged by a user and that woke me up to the blind spot.  I took care to select my key without a space to the right value.  After gluing and OK'ng, the entries appear immediately.

  Hope this helps someone else who might have a similar problem in the future.

  HR

• Workstation 12 exclusive Mode

  Product: VMWare Workstation Pro 12

  Host: Windows 7 SP1

  VM: Windows 7 SP1

  Use of the VM: SCADA HMI - essentially the Kiosk Mode

  I'm looking for a way to have the virtual machine to start in exclusive mode automatically, essentially creating a kiosk environment.

  I am currently deploy 12pcs industrial workstation at the manufacturing plant. These computers are currently configured as follows

  • Automatic startup and connection of the host operating system
  • Autostart and VMware mode connection full screen
  • Automatic start of the SCADA software that has built-in filtering of CTRL, ALT, Win key for OS VM
  • Host operating system use Sharpkeys to turn off CTRL left and disable the ALT right as method of obfuscation to prevent accidental exclusive mode
  • The value to hide the edge of the toolbar of VMware
  • VMs will be protected to prevent changes to VMware

  If an engineer starts the system, they are asked to put the virtual machine in exclusive mode. Obfuscation prevents most operators to discover the correct method of CTRL + ALT key to take the virtual machine in exclusive mode. We can both sets of CTRL, ALT keys if necessary, but it is not the purpose of this post.

  However if the user reboots the machine, which they have been known to do, the virtual machine does not start in exclusive mode, which represents an opportunity for operators interested in search or access the desktop of the host. It's not supposed to be an analysis of standard operating procedures and documents indicating the operator don't not to 'play '.

  Is there an integrated method, or by the use of 3rd party software, by which we can ensure the virtual machine starts in exclusive mode?

  Workaround to exclusive mode and create a nickname Kiosk Mode

  Use vmware-kvm option.

  With VMware Workstation 12, you can run virtual machines with VMware KVM, which allows you to use

  shortcut keys to switch between the execution of virtual machines and the host, as if they were attached to a KVM switch

  By default, you will not have a toolbar. In the KVM mode preferences (run vmware - kvm.exe - preferences), you can disable the CTRL + ALT key capture, allowing you to host. Since it allows the switching key you will take care to set the key to something like F2 switch, then use a free program like Sharpkeys to remove the assignment of the F2 key on the host. This essentially locks the user in the guest operating system by trapping the F2 key to pass. You do even if you don't have that 1 virtual machine running as the default behavior is to switch to the host operating system.

  There is one last caveat, Ctrl + Alt + Del is always available. It will activate the host and guest OS Secure Attention sequence (SAS). This can be bad. Never fear there is ways around this problem. Registry keys using following you can disable/remove all options on the screen Ctrl + Alt + Delete.  The user sees only a Cancel button. You may need to do this in your OS invited also based on this software is running. I use Wonderware that allows only keytrap mechanisms so only the host was necessary for me.

  In this file (saved as a .reg) applying it will do the following:

  For the computer Local - all options enabled (do not want to lock other users, such as recording manually as an administrator)

  For the current user (assumed there is auto login user by default)

  Disable/remove the following options:

  • Hide the fast user switching
  • Disable Task Manager
  • Disable Lock Workstation
  • Disable change password
  • No logoff

  Windows Registry Editor Version 5.00

  ; This disables the CTRL ALT DEL Secure Attention sequence (SAS) options

  ; anti-pop filter

  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]

  "HideFastUserSwitching" = DWORD: 00000001

  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]

  "DisableChangePassword ' = -.

  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]

  "DisableTaskMgr" = -.

  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]

  "DisableLockWorkstation =.

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]

  "HideFastUserSwitching" = DWORD: 00000001

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]

  "DisableTaskMgr" = DWORD: 00000001

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]

  "DisableLockWorkstation" = DWORD: 00000001

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]

  "DisableChangePassword" = DWORD: 00000001

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]

  "NoLogOff" = DWORD: 00000001

  You can also use sharpkeys turn off Ctrl, Alt, delete (6 total) function keys but you must do so within the host and the guest, and this could prove problematic.

  There are other ways to accomplish this as removing the shell from Explorer to the host operating system at startup and its replacement by the VMware - KVM.exe (it's another registry setting), Ditto for the guest operating system.

• Help with duplicatemovie

  Hello

  I have attached my project below file.

  You control the car with the arrow keys and shoot with A and D.

  Very well, but when you drive a bit you're going to meet the zombie walk on the road. (Its okay to shoot on him or drive him )

  Here's my problem, but I want a lot of zombies of the movieclip even as one that is already there, it doesn't do just duplicate the movieclip because when we die, two of them don't gotoAndPlay when it's suppoused just to get to one affected.

  Current odd things there, but I'll be very grateful for any help I can get .

  Thank you and please forgive the bad English .

  The project file: http://www.2shared.com/file/_aUtKqYi/car_new_4.html

  3. 4 mb.

  assign a connection id to your zombie library and attachMovie() to create instances of more independent zombie.

• Differences in ColdFusion?

  I have a very rookie question, but after some research, it is still not clear to me... What is the difference in Enterprise (2 processors) version and version Standard (2 CPUs)?
  
  Furthermore, to the best of my understanding, ColdFusion is simply developed in Dreamweaver, but you must have ColdFusion Server installed on the server to deploy so that the server includes extensions and labels. So when you buy the ColdFusion software, you actually buy the server software, correct?

  That's ok.. I'm sure that you never asked a 'silly' question before... must be nice to be up to you! This forum should be for people to feel comfortable asking questions such as technology, for some of us anyway, is difficult. This product comparison page a click or two away from the main page of ColdFusion? Yes... but you can pick up your car from the house keys and leave frustrated after not having found them, and someone else comes and finds that they are on the coffee table. Does not mean that the first person is not looking.

  You have pointed me in the right direction without being smart.

• Simple database design - of the Suggestions?

  I built a sample non-real life data base for an auto Agency. The Agency has, model cars, some sellers and buyers. I have to keep track of each of them.
  
  Here's the process I took during the design:
  Standards 1, 2 and 3NF, and relationship to an and the other to many...
  
  Column of italics is primary key...
  
  The database is not realistic, I did it for the practice of the purpose. If you please, look at the diagram and tell me do you think its OK so far? or the design is wrong?
  
  This is my schema:
  
  Vendor table stores the information from the Publisher:
  
  * Seller Table {+ SellerID + (number), first name (text), family name name (text), address (text), city (text), CountryID (foreign key), hired to date (date)} *.
  
  Table Customer stores customer information, the client can deal with a seller at a time, while a seller can deal with more than one customer at a time:
  
  * Customer Table {+ CustomerID (number), first name (text), name of family (text), address (text), city (text), (foreign key) CountryID, SellerID (foreign key)} *.
  
  Car table stores information about the cars available:
  
  * Car Table {+ CarID (number), manufacturer (text), model (text), car year (text)} *.
  
  Bought car table hold information about customers who bought a car and a car of type were purchased and the date of purchase (date of purchase is based on CarID and CustomerID field):
  
  * Bought car Table {CarID + (foreign key) + CustomerID (foreign key), purchase date (date)} *.
  
  OR
  
  * Bought car Table {+ PurchasedCarID + (number), CarID (foreign key), CustomerID (foreign key), date (date of purchase)} *.
  
  -----
  
  * Country table {CountryID + (number), name of the country (text)} *.
  
  A customer and a seller can store several phone number:
  
  * Phone of Table {PhoneID + (number), CustomerID (foreign key), phone number (text)} *.
  
  If I want a salesman to store more than one number, should I do a new table that stores the sellers phone numbers? Or there is a better way to do?
  
  Note: I created country table and table of phone number because they are considered as multivalued fields. To achieve 1NF, I must leave each field in the table (e.g. seller and customer) be atomic.

  It would be better if you post real DDL for the proposed tables.

• index of reverse key and quarrels in the CARS

  Hi guys,.
  
  I have read that reverse key indexes distribute values in an index and are particularly useful in the CARS, because if the index is on a streak, and many insertions occur, the RAC instances will access the block sheet of index on the side right, and so with the help of a key index reverse, we can stop this argument if we use a reverse key index. Fair enough, makes sense.
  
  But, not all of these RAC instances also would be access to the same block of data in the base table when they insert? Wouldn't we have serious claim here?
  
  Thank you

  I think ask Justin to create a forum of OracleGuy777. :-)

  OracleGuy777 wrote:

  Not sure why you want to involve PK or PK increment as a condition, or restrict the other thing that happens in the block.

  No, I was not limiting nothing happens. I said just that if nothing else happens in the block because I wanted to understand if my understanding of the data block and locking are correct if the only thing thaty now goes it is that someone is inserting a line, and the PK is a sequence that increases of 1 every time an insert that is happening.

  Good. As much as I know there no functional change in a block-table perspective if the inserts imply the PK. And the fact that the PK increments of 1 is totally out of reach and out of place.

  >

  then the number of inserts that can happen at a given time is determined by MAXTRANS (and assume that the block has enough space for the ITL to develop). This is true for the index data block and the block of data in table, and the transactions that the insert will get an exclusive table lock on line. My understanding is correct?

  Close enough. Suggest that you only consider http://dbaspot.com/forums/database-discussions/35673-initrans-maxtrans.html

  I went and read that (with great difficulty, why is every post published about 10 times?!). Yes, good article, but still don't know why my understanding is close enough, and that little, I was wrong.

  (Each is re-posted because the thread came from Usenet newsgroups, and entries are independent in time.) Is that although later than aggregators put them into one long page. Ideally you would just read the last entry and e able to catch up on the full thread. "These are the days.)

  Perhaps a better discussion is at http://advait.wordpress.com/2008/06/16/interested-transaction-list-itl/

  According to my interpretation, that the link contains a logic error (fairly common) in that it involves the ITL points to the line that is locked. This is not correct - the points of the line back to the location that contains the ITL. (In fact the line directory doesn't, the line itself.) If more than one line may be blocked by the same transaction as 'lines' in the directory headers point to the same LAUGHS.

  I discovered many years ago that nothing is absolute in Oracle. When I say "this is true" or "it's like that", someone pointed out a Variant that proves me wrong. Things change version, by patch, by design, by function, by segment type, etc. So when I say "this is close", I guess that's a theory of decent work, but there may be exceptions. If you intend to learn all variants, you'll learn some time loooooong.

  In older versions of Oracle, MAXTRANS was usually set quite low and the DBA would adjust that to manage the space-vs-locking problems that allude you to. In its latest versions, MAXTRANS is simply pegged to 255, especailly when you use SAMS and is officially deprecated.

  The entire concept of ITL and line lock is subtly different in the index, however. Insertion of a row in a table can affect a large number of different lines through the index. How much should be locked when a split block that happens? Or when inserting in the middle of a beach? I think that Richard Foote has some info on that as well.

• Bought a used computer a copy bootleg but it has windows with key code sticker... I know how to fix cars not compters

  I bought a computer off Crigslist, but he had a bootleg copy of windows 7 ultimate on it but thecomputer has a key windows w/sticker code XPsticker to this topic... can someone please help me do this right without having to buy a new windows please

  Try: How to replace Microsoft software

• I wish adope photoshop element 5 par UN privilege to install car I lost my installation cd and I found my wallet with my activation key

  Hello

  can you Send a privilege to install photoshop element 5, because I lost my cd installation English, but I have my activation key.

  Hello

  Download Photoshop Elements 5 is not available because it is very old version.

  Kind regards

  Sheena