ProBook G2: Installation of Windows ProBook problem

Similar Questions

• Pavilion 6110y: installation of Windows 7 problem (it won't)

  I want to have vista 64-bit home premium for Windows7 64-bit home premium. I bought a new HD 500 GB but will not complete the installation of windows 7. It says that it cannot install on this material. Online research indicates a possible problem or sata controller mode setting (bios) driver. I need new drivers (and if yes where can I find the) or change the raid sata controller mode setting FROM ahci or ide fix it? And if drivers or settings solves the problem I will always be able to access my current hd without any problem? Thanks in advance.

  I was finally able to find good information on what to do. I changed the sata controller ahci bios and after installing windows drivers the aok installation is complete. Everything works fine now with two hard drives.

• Stand-alone installation of Windows 7 problem

  I have just installed Windows 7 Home Premium 64 - Bit and then installed an upgrade to Windows 7 Ultimate on a new desktop computer.

  All up and running.

  When I download and try to install Service Pack 1 - KB947821-v34 - x 64, I encounter this error

  Windows Update Standalone install.

  "Setup has detected the error: 0xc8000222.

  I also have the same error message when I try to install XP Mode.

  WindowsXPMode-en-us (1) installs OK (installed first)

  Windows6. 1 - KB958559 - x 64-RefreshPkg (Virtual PC) - error: 0xc8000222

  I also downloaded the Microsoft troubleshoot and get this message

  "A problem is preventing the troubleshooting tool to start.

  Any help appreciated

  John

  Hi John,.

  To resolve your concern about stand-alone installation of Windows 7, please follow the steps here.

  An update on the result.

  Kind regards.

• Installation/space Windows Vista problems

  Recently the Windows Vista Setup program does not allow the installation of the different software components.  Sometimes I have a vague (as impossible to install) error code, sometimes the installation starts from inside IE and then just comes back to IE. But no installation occurs.

  I am slot as Vista Business 64-bit Service Pack 2. (5 gig Ram)

  I have between 50 to 500 free MB on the disk. (I have a drive c to 35 gigabytes.  But, windows uses 31 G (winsxs uses 20 G).)  Supposedly, it's a problem of Microsoft to know during the years that they have no desire to fix.  I regularly try to clean the space, but it's like trying to hold back the Mississippi...

  Uninstall seems to work.

  I ran various utiilties of Microsoft to try to resolve the problem. (I think this is worse!)

  I ran sfc/scannow and it has detected/fixed no problem.

  When I was able to capture more storage space (by moving my virtual memory on another drive) briefly the problem has not disappeared.  The Publisher of the software after several hours of searching in various newspapers told me it was a problem of Microsoft Installer.

  I don't want to re - install the OS that I don't have a number of my installation for different software products discs (they are all legal).

  I'm not so sure that Windows installs my updates properly at this stage either.

  Any help would be appreciated.  I'm drowning in time to support.

  What is E? The dual computer boot or pagefile on E refers to the operating system in C?

  I did not used Easeus Partition Manager, Partition Magic and Acronis who buy software using, but the principles will be similar. What you need to do is to reduce the size of D, so that there is a free space between C and D, and then increase the size of C in this space. You can then increase the size of D in the original unallocated space of 5.86 GB in D.

  I suggest that you study the knowledge base, and there is a line on manual. Print the relevant parts. The FAQ in the first link and follow two particularly relevant links:

  http://www.partition-tool.com/EASEUS-partition-Manager/FAQ.htm

  http://www.partition-tool.com/EASEUS-partition-Manager/FAQ/technical-faq32.htm

  http://www.partition-tool.com/knowledge-base/how-to-extend-system-partition.htm

  Good luck.

• Oracle 11g Installation of Windows R2 problem

  Hey everybody,
  
  I tried to install Oracle 11 g R2 on a computer Windows Server 2008 64 - bit. When installing, I get an error several times (about 20 times) message where it says that it can't find some files as C:\app\ora11g\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\WFMLRSVCApp.ear and a few other files too. If I click on go in the dialog box whenever an error occurs, the installation will succeed and completes successfully.
  
  What I'm doing wrong, what I have to change anything before installation starts?
  
  I use the 64-bit correct installation files that I downloaded from the homepage of the Oracle...
  
  Edited by: user12266335 the 07.04.2010 05:32

  I lived a similar problem. The first file, which it found was:

  $ORACLE_HOME\oc4j\...something...\em.ear

  There was a lot more after that.

  To give you some background, I unzipped my pieces of downloaded files (1 and 2) in the default directories.

  Who created two folders:

  ...\win32_11gR2_database1of2
  ...\win32_11gR2_database2of2

  When I had errors that were missing from the files, I thought I'd try choose my repertoire
  to decompress the files. I made sure that now, they went in the same directory:

  ...\win32_11gR2_database

  After that, I don't have the mistakes that I had before. Installation was successful. This technique is indicated in the documentation to a certain extent. However,.
  I think they need to emphasize that this is necessary, otherwise the installation will not work. Unlike Oracle 9i when we had several installation
  directories (disk1, disk2, disk3, etc.), the 11 GR 2 installer doesn't seem to be able to automatically find other/next directories. Looks like an oversight
  or a step backwards for me.

• Installation on Windows XP problem

  I am trying to install the first 10 Elements on a XP SP3 computer.  I bought the disks of Photoshop Elements 10 and first 10 MOE elements when buying a video camera last week.  There are two discs in the package, one for Windows, one for Mac.  Photoshop installed fine.  When you try to install the first Elements 10 I get the error "the installation package is not supported by this type of porcessor.  Contact your product vendor. "It seems that the only version of first disk is for the 64-bit version.  How can I get the 32-bit version for XP?  The package shows that it works on XP, but it does not appear that any package installation on one of the disks works with XP.  Any help would be welcome.  Thank you.

  Thanks Steve, that worked.  I downloaded Adobe he installed and very well accepted serial number.  Sweet!

• R12 (gel during installtion) installation on windows 2003 problems

  Hello
  
  I try to install R12 on windows 2003.
  As per document 402311.1 , I've supported every step of pre-installation (as cygwin installation, active perl, visual c++ 8.0, jre).
  
  After you create the staging area, I started installation of oracle applications using 'rapidwiz.cmd '.
  
  Nothing is progressing in step 1 (at 5%). It shows 'done unzip 38 on 93 '.
  
  Operating system works properly and I am able to perform other activities while the facility was suspended.
  
  I don't know why the installation is hanging / freezing at 5%.
  
  Suggestions please...

  user454028,

  How did you create the staging area directory?

  You are able to extract the following file manually in the directory "C:\StageR12\oraDB\Disk2\dbts\stage"?

• Update installations of Windows Live problems.

  Windows Live essential (KB2434419)

  I continued to receive messages several times a day I have to install the updates and then says "could not install the program - you already have a taste of different construction of Windows Live."  These are essential and if not how can I stop the next bubble?

  You can find support in this forum ONLY for the installing/uninstalling/upgrading to Windows Live Essentials 2011: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  See also...

  http://windowslivehelp.com/searchresults.aspx?query=build%20flavor&ProductID=12

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Installation of Windows ICE problem

  I downloaded the ice, but when trying to install it tells me to download and install .NET Framework 4.  I downloaded 3 different copies of it, when I double-click the file setup the hourglass appears and then disappears and nothing happens.  This happens for all 3 download files.  I tried to reboot between the two, but it makes no difference.  Can you please indicate.

  I can't believe, but about an hour after the first tent to install .NET Framework 4, the Setup screen appears and seems to have installed correctly.  In any case when I clicked Next on the installer of ice, which went through OK as well.  So everything is sorted.
  I'm sorry to have bothered you, it seems odd for the process of download/install to take so much time, there may be something to do with the kids being on vacation.

• Boot on HP ProBook problem

  original title: help! Boot on HP ProBook problem

  My 4015 s ProBook HP with Windows Vista does not start in normal mode or safe mode. I could run a recovery program to get the system to its original settings, but then I lose files. I don't have a boot cd. Someone at - it ideas how start the system again and save my files on my hard drive?

  Follow these steps to try to solve your problems of boot.

   

   

   

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Error code: C000009A (problems applied update registry during the installation of Windows 7 Service Pack 1)

  After installation of Windows 7 Service Pack 1, the system restarts, and before windows comes up the registry is updated.  I get an error C000009A 128115 of 387921 enforcement update (/ registry)... error that prevents the system to reboot.  Is it possible to get the system to reboot and complete the installation of the service pack.  The only way that I was able to work around this error is to restore from the system restore point before the service pack, but I want to apply the SP1 if possible.  ????

  Windows update and SP1 gave me the same problem and I used this hole day to RESOLVE.

  Windows 7 is not bootable. Safe mode Windows 7 was not bootable, - stop at classpnp.sys.  I used the line of command of the rescue disk and Linux (!) to fix it.  And then little important reading / advice on this forum.

  Error message at startup:

  C000009A application update 262832 (registry\ma 109544 operation error   (no more room on screen)

  After a few reboots failed, I tried a restore of windows rescue disk, but windows update has somehow erased all my restore point! (Argh)

  Then I looked in the log file c:\windows\winsxs\poqexec.log and found a reference to the error: (obs this folder has some 70,000 + files)

  1cbd36fd5eb05f3: 74, c000009a, 1abe7, 0, SetKeyValue; \Registry\Machine\Software\Microsoft\Windows\CurrentVersion\SideBySide\Winners\amd64_microsoft-windows-e atibility.resources_31bf3856ad364e35_pt - pt_0b9032dad0ee6ed8\6.1, 6.1.7600.16385, AQ =.

  Then I tried to add this key in the registry using regedit command line after booting from the rescue floppy.  But repeated boots showed this register does not have / save my extra key. (Strange-I should be able to change the shape of the hot spare register, or?)

  Next step was to start a live CD of Linux (Mandriva) to browse the windows system drive.

  This way, I found the c:\windows\winsxs\pending.xml (99 MB) file and may open in kwrite (Linux).  I'm looking for "atibility.resources_31bf3856ad364e35_pt - pt. Found only in the 114.808 (of more than 300,000 lines) line.  Add a! After< to="" make="" this="" xml="" line="" a="" comment.=""  saved="" the="" file.="" rebooted="" and="" ..="" yes="" ..,="" windows="" 7="" updated="" some="" files,="" rebooted="" 2="" times="" and="" then="" started="" as="">

  I guess MS has created a lot of angry people today!

  Amd64_microsoft-windows-e... atibility.resources_... file is probably related to

  (a) ATI/AMD graphics (as in my system) cards

  (b) Windows MUI (Multilingual User Interface) system in windows 7 ultimate.

  PT - pt is a code for a language.  (Not mine, I'm from Norway, no.)

  on Windows 7 ultimate (new)

• Problem drive Installation in Windows XP Professional Version 2002

  Hello, I had problems with my Installation of Windows XP Professional disc, that is authentic. I run the Setup, everything is going very well... I get the "Welcome" screen I press F8 and then he said something in the sense of "we see that it is empty and almost died, go buy another drive of installation if you are qualified or something." It is a legitimate disc, I used this before a long time ago, and I have still 3 uses on it. I check my settings, all right, and the computer was made for Windows XP.

  Is there something wrong? What I really need to get an old installation disc, which will probably costs me about $ 50 just to get shammed?

  Please answer.

  Thank you

  Voizak Gyrith

  1 CD can get damaged or dirty, but...

  2. to learn more, you must provide the exact text of the error message.  It appears from your description of the error message, if you have an installation CD 'upgrade '.  What is the screen that you see? -->

  

  If that's what you see, you will need to find a CD for one of the listed versions.  You should be able to find one of these for not much money... very few people is eager to something like Windows 95 install these days.

  3. you shouldn't be pressing F8... at least not with a normal Windows XP installation CD.  For the sequence of screens, you see, look here--> http://www.theeldergeek.com/xp_pro_install_-_graphic.htm

• Installation of Windows 7 won't solve my installation problems I have with Vista home premium.

  The Windows Installer has stopped working. Have tried a lot of solutions, none worked. It seems that a lot of people have the same problem.

  Found answer in a forum of Windows Installer Service from 2009. It solved my problems. Had to download an installer of Windows Registry Fix.

• HP ENVY m6-n113dx Notebook PC: new installation of Windows 8 on HP Envy and with problems of drivers.

  I have a laptop HP Envy M6 and it came with Windows pre-installed on it 8.1. I always do a new installation of Windows, whenever I have buy a laptop that I hate all the bloatware and stuff which they pre-install on it.

  Unfortunately, when I did, I found that the drivers on the HP website do not work for some things, especially my wi - fi.

  In Device Manager there are three things that make their appearance as having a problem:

  Network controller:

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01

  Unknown device:

  ACPI\VEN_HPQ & DEV_6001

  Unknown device:

  ACPI\VEN_HPQ & DEV_6007

  If anyone can provide me with some drivers work, I would be incredibly grateful. I called HP and they told me all I can do is to pay $40 for a CD delivered to me so I can reinstall the version of bloatware, and I really want to do. I want to use my real version of Windows 8 and not pay for something I don't even want.

  Thank you!

  Nevermind, I fixed it myself by reading old son of Paul_Tikkanen

  I used http://www.pcidatabase.com/index.php

  and found the diver that I needed, and now I don't have to pay $40 for the version of bloatware.  Yay!

  Thank you Paul!

• I too have a problem installing windows error1601. I went through the steps to get services and found that this installer of windows is gone. How can I get that back?

  I too have a problem installing windows error1601.  I went through the steps to get services and found that this installer of windows is gone.  How can I get that back?

  Try to run the Windows Installer Cleanup http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml utility to see if that solves the problems with windows install.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problems with the installation of Windows 7 Home Premium: ask load the driver during installation

  I am currently using Windows XP Professional Version 2002 SP3 with specification of my computer as below:

  Intel Pentium D 3.40 GHz 3.39 GHz

  3.5 GB RAM

  I tried to upgrade to Windows 7 by restarting my computer and boot from the CD. Setup goes as usual, initially, he asked for the language installation during installation, and after I clicked OK, the window titled "Load driver" had appeared with his message as below;

  "To install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK."

  What are the problems really? Because I think I have all the necessary drivers and before that everything works fine. Where can I get the drivers? And how to solve this?

  Help, please. Thank you. :)

  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).