Cara having file yang terhapus

Similar Questions

• Using LabVIEW LabView not having files not system

  Hello guys,.

  I'm using Labview 8.5 and I designed a particular VI... Now, with the help of tutorials on Developer Zone, I have prepared an EXE file in the same way it works on a system that isn't Labview... (Point of view of users.)

  but I found my .exe file does not... Error message... Install the runtime Engine 8.5... I installed the same... and even today... double click on the right icon does not display anything... even not an error mesg... can someone tell me a solution for the same...

  At the same time my VI use mx data acquisition (DAQ mx 8.6) and I have a slight confusion if these tasks can run on a system that have labview and therefore not your tasks... I have to switch to something that creates tasks first, and then executes the VI... Something of this sort is possible in Labview 8.5... help plz...

  When you create the installation program, select this option to export the MAX configuration so that will be included in your Setup and also include DAQmx and MAX as part of Setup.

• No data after running Chkdsk. having files with dir0000.chd

  I ran chkdsk from property drive (drive E and F) option after some time I restart my pc and start pc done chkdsk. After that when I opened my drive I shocked that there was no data. In dos mode, I saw that my data was in found.0000 dir and there were dir0000.chd such as files and there are a lot of files like this with number.how can I get my data in original form.plz help

  Thanks in advance already solved my 2 problems.i u wait 4 your statement

  Hello

  1. don't you save the data before running chkdsk?

  You should support your data when running chkdsk. Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on that data will be lost.

  Now, you will need to use a third party software to recover your lost data.

  THIRD WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Firefox (40.0.3) finds but fails to hand off the files bit torrent to Utorrent (3.4.5 - build 41202)... suggestions?

  I use Chrome for find and UTorrent to download files torrent bit through my regular internet service.

  I use Firefox to find and UTorrent to download torrent files bit through my internet VPN service by proxy.

  Both browsers are excellent to find the files I'm looking for (usually the TPB) and wen I click on the button 'Get this Torrent', both browsers view 2 pages related with UTorrent.

  With Chrome, the target file is quickly "given" to UTorrent and download is performed as expected

  With Firefox, however, the target file is NEVER 'delivered' to UTorrent (I waited an hour just to be sure, it wasn't an incredibly slow process). I've recently upgraded to Firefox 40.0.3 and never had this problem before this upgrade.

  Your suggestions and advice is required... Please be gentle, I'm sure that most of you have already figured out I'm not in the category 'exceptionally skilled user '. I appreciate your time and consideeration.

  Concerning

  gparrott

  First, re - install the torrent program. Make sure that the installer
  takes care of file associations.

  Now, check the screen shoot.

• Impossible to mount the drive external HARD under Ubuntu Linux - file system damaged and MFT

  I get the following error when I try to mount my external hard drive on my Ubuntu.

  UNABLE TO MOUNT
  Error mounting/dev/sdc1/media/khalibloo/Khalibloo2: command-line ' mount t 'ntfs' o ' uhelper = udisks2, nodev, nosuid, uid is 1000, gid = 1000, ask dm = 0077, fmask = 0177 "" / dev/sdc1 "" / media/khalibloo/Khalibloo2 "' came out with the exit status no lame 13: ntfs_attr_pread_i: ntfs_pread failed: input/output error".
  Cannot read MFT, mft = 6 count = 1 br = - 1: input/output error
  Could not open the FILE_Bitmap inode: input/output error
  Failed to mount ' / dev/sdc1 ': input/output error

  NTFS is incompatible, or there is a hardware failure, or it's a SoftRAID(4)/FakeRAID hardware. In the first case run chkdsk /f on Windows, and then restart Windows twice. Using the /f parameter is very important! If the device is a SoftRAID(4)/FakeRAID then frst activate and mount a different device under the/dev/map/directory, (for example/dev/map/nvidia_eahaabcc1). See the documentation for 'dmraid' for more details.

  It is not mount on windows either: "i/o device error".

  This is a disk with a single partition hard ntfs

  Of course, I tried chkdsk /f. reported several file segments as unreadable, he didn't say if he fixed them or not (apparently not). also tried with the indicator/b.

  ntfsfix reported as corrupted volume.

  TestDisk was able to correct a small error with the partition table by adding the '80' for the active partition indicator (only). TestDisk also confirmed that the boot sector was very good and it corresponded to the backup. However, when you try to repair the MFT, he could not read the MFT. He could not also the list of files on the hard drive. It says file system may be damaged.

  Active @ also shows that the MFT is missing or damaged.

  I tried to replace the USB cable. Has not changed anything. I tried to update the driver. Windows reported that he was already up to date. Yes, the pilot has been activated.

  So, how can I fix the file system? or MFT? or the I/o device error?
  I used the HARD drive for months. This problem started 2 days ago. I also tried to mount it on other computers, without success.

  Hello

  I'm sorry to read about problems with your drive.
  Unfortunately, I think that the question is misplaced a bit as your case appears to be the health of your rather external HARD drive that a specific problem related to Linux.

  To add clips, if the tools you use have failed to fix your drive, then I do not think that a user 'normal' forum will no longer.
  I know it's a fine recommendation and probably just add salt in your wounds: If you really care for files, do a sector backup before doing any file system / partition own modifications.
  The reason is very simple - if the tool you use has made a mistake when judging what actions are the right ones, and submit these changes, you move your goal - and fast!
  Instead of repairing, the tool can simply corrupt data even further.
  Any subsequent change aggravates the disorder exponentially.

  Judging by the details in your message, I'm sorry to say that I think your drive is defective, or at least the data is lost.
  Of course some companies will probably be able to restore it, but that normally costs a fortune.

  Unless you are willing to spend astronomical amounts of money on data rescue, so I suggest to accept data loss and look at what you can do with the HARD drive.
  Try to format. No problem, this indicates the drive is defective and must be replaced.

  Sorry for so little help.

  Tom BR

• Age of Empires 3 does not start on a vista machine, get this error "C:\Program Files\Microsoft Games\Age of Empires III\d3dx9_25.dll is not designed to run on Windows or it contains an error."

  I'm trying to play age of Empires 3 on my computer running windows vista Home premium and the program does not start. I get the error message: "C:\Program Files\Microsoft Games\Age of Empires III\d3dx9_25.dll is not designed to run on Windows or it contains an error." I tried many suggestions from Microsoft (resettlement program, reinstall in safe mode, update & reinstall the drivers for my video card, the compatibility issues with vista, updating and reinstalling directx 9.0 c, install vista service packs 1 & 2) but nothing has worked so far. I was able to play the game on the same computer with windows xp installed (it's a different hard drive that is not in the computer, and everything is the same) and it worked fine. My computer is old enough, but like I said the game worked before installing vista. ASUS A7N8x deluxe, AMD Athlon xp 3200 +, ATI radeon 9600, 2 GB OCZ ram that all suggestions are welcome. Thank you.

  Hi Raygun55,

  Welcome to Microsoft Vista answers Forum!

  This problem may occur if the Microsoft DirectX file that is mentioned in the error message is damaged or is not copied correctly.

  I suggest that you copy the file manually by following the steps and check if you are able to play the game without any problems:

  Manually copy the file

  To do this on a computer that is running Windows Vista, follow these steps:

  1 insert the disc 1 CD for one of the following games into the player from the computer:

  o Age of Empires III

  o Fable: The Lost Chapters

  o Zoo Tycoon 2

  o Rise of Nations: Rise of Legends

  2. click on start to reduce this includes this image and then click Documents.

  3. Locate, and then click computer.

  4. search and then click on the CD drive.

  5. Locate and then click the following folder:

  CD player :\ DirectX9

  Note In this folder path, the CD player represents the drive letter of the CD drive.

  6 double-click on Apr2005_d3dx9_25_x86.cab, right click on d3dx9_25.dlland then click copy.

  In Rise of Nations: Rise of Legends, double click Aug2005_d3dx9_27_x64.cab right-click d3dx9_27.dlland then click copy.

  Note Use the Apr2005_d3dx9_25_x64.cab file for the x 64 version of the Windows operating system.

  7. find one or more of the following folders, depending on the games that are installed on the computer:

  By car : \Program Files\Microsoft: Age of Empires III

  By car : \Program Files\Microsoft Games\Fable - The Lost Chapters

  By car : \Program Files\Microsoft Games\Zoo Tycoon 2

  By car : \Program Files\Microsoft Games\Rise of legends

  Note In these folder paths, drive represents the letter of the drive where the game is installed.

  8. right click on the folder of the game which is the part that is installed on the computer, and then click Paste.

  Note If you have installed more than one game on the computer, repeat steps 5 and 6 for the other games.

  You can check the link for more information: error message when you try to start a Microsoft game: "the file d3dx9_XX. DLL was not found": http://support.microsoft.com/kb/910813

  Alternatively, you can try to install the game in XP compatibility mode and check if you are able to play or not.

  Right-click on the game > click Properties > click on the Compatibility tab > select for XP compatibility mode > click OK.

  Let me know if it worked.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell printer V725W download files

  When I loaded my Dell Printer V725W having files creates a folder called "Dell printer House", but the problem is, I can't open all files in "Printer Dell Home".  Why?

  vwgoodrich,

  Open run, Windows keys and r at the same time and copy the link below and paste it here.

  C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Dell printers

  Right-click on the home Dell printer icon, on the left, click on copy.

  Go to desktop, delete the old Dell printer Home icon.

  Right-click on an empty space on your desktop, on the left, click on paste the shortcut. If you click on printer Dell House, you should be able to see the settings like the screenshot above.

  Rick

• Why files deleted keep re-appearance

  Hello

  I use Windows 7 SP1 Home Premium.  I am connected with administrative rights.

  For some reason when I delete some of my files, insist they reappear - generally audio files that I ripped and then removed but also sometimes other files.  This happens even if I empty the trash after deleting.

  It's frustrating - if I delete the I want them to go. do not continue to reappear.

  Y at - it an explanation for this rather annoying and weird behavior?

  Hello

  It is not so much a problem with the basket as having files that I deleted my documents and music files reappear again.

  After I posted this message I deleted the files that I didn't, again removed my libraries media files, emptied the trash and then did a disk cleanup to delete unwanted system files. This seems to have finally got rid of them.

  So, I'm still puzzled as to why the files that I've deleted later reappear in My Documents and music files

• Duplicate in music libraries and Documents files

  Hello

  I'm running Windows 8 Professional and have noticed that all my files in my library of Documents also appear in the music library. I did not put them there they appear suddenly. If I try to cut and paste into the Documents folder I get a message

  The destination folder is the same as the source folder

  or

  The source and destination filenames are the same

  Open files in these two places, but it's annoying having files that should not be in the library of music in there.

  If I delete the folder from the music library it removes also of the document library.

  This only happens in the music library - no problem with the photos or videos to libraries.

  Appreciate someone can provide any assistance.

  Thank you, Andrew

  Found the answer to a link of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/include-folders-in-a-library

  In Windows 8 open library with duplicate files

  Click on manage the

  Manage Library

  In places of library remove libraries don't want included

  (in my case).

• difference between .rman and .rcv file extension?

  What is the difference between .rman and .rcv extension. According to what I understand you can run only two extensions using RMAN of files using cron. Is it typo? Or am I wrong?
  
  Thank you.

  What is the difference between .rman and .rcv extension. According to what I understand you can run only two extensions using RMAN of files using cron. Is it typo? Or am I wrong?

  ORACLE does not care the files extension. Same control/data/redo or any other scripting RMAN. You too keep file as "full_backup.aymanzone". No problems.

  But makesure the file name and extension you created. Is the same that you use/run.

• The duplicate files that appear in the Explorer window

  I am writing a custom plug-in for a CMS.  I have a problem opening the files in Windows Explorer where each child record is listed twice.  However, every child is a folder is listed only once. This happens for any folder in the CMS.

  View the logs files to my plugin, it seems that Windows lists the contents of all folders, then it can show the hierarchy in the navigation pane.  Then when I click on a folder, it re - lists the contents of this folder.  I believe that it is this second call to the GetChildrenHandler which is originally in car show files duplicate since if I turn off the navigation pane and to clear the disk cache, only one instance of each file appears.  Note: I never get more than 2 bodies even if I re - view folders on a newer.

  I based my GetChildrenHandler after the GetChildrenHandler sample.basicftp.  However, I use 16-byte hexadecimal idenitifiers as asset ID instead of paths. I have in my plug-in intensive logging and that you have verified that when I create the recipe update of the file, the active code, active path, parent ID and active are all identical.

  Any help would be appreciated.

  Rich

  I thought about it.  I'm assigning a version 0 for the first version of each asset.  When I started the version numbering at 1, this problem has been resolved.

• Recover + restore and backup CARS

  Hello
  
  I tried in the last days RAC RMAN backups on disks!
  
  I have two node RAC - Systems Version 11.2.0.2 on Linux Redhat 5.4 X 86 - 64.
  
  + Node names stb, dwh
  + Name of the database: RAC
  +-The instance name 1: RAC1 on stb
  + Name of instance 2: RAC2 on dwh
  + Database catalog CATDB on stb
  + ASM-Volumm groups of DATA, FLASH
  
  RAC database has been configured with RMAN in CATDB:
  
  RMAN > set DBID 2329313036
  
  executing command: SET DBID
  his name is 'CARS' and DBID is 2329313036
  
  RMAN > show all.
  
  Database with RMAN db_unique_name configuration parameters are:
  CONFIGURE REDUNDANCY 1 RETENTION STRATEGY; # by default
  CONFIGURE BACKUP OPTIMIZATION
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  SET UP THE DEVICE TYPE DISK PARALLELISM 2 TYPE OF BACKUP BACKUPSET.
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE CHANNEL DEVICE TYPE DISK CONNECT 1 ' * sys/psw@RAC1*';
  CHANNEL to CONFIGURE 2 DEVICE TYPE DISK CONNECT ' * sys/psw@RAC2*';
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
  
  RMAN > DATABASE INCREMENTAL LEVEL 0 BACKUP;
  
  RMAN > list backup;
  
  
  List of backup sets
  ===================
  
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  Incr 156 0 M DISK 00:01:10 408,46 January 26, 11
  BP key: 161 status: AVAILABLE Tablet: NO Tag: TAG20110126T151554
  Part name: +FLASH/rac/backupset/2011_01_26/nnndn0_tag20110126t151554_0.267.741453361
  List of defined backup data files 156
  Name of file LV Type cash SNA cash time
  ---- -- ---- ---------- --------- ----
  2 0 1164421 +DATA/rac/datafile/sysaux.257.741330851 incr 26 January 11
  3 0 incr 1164421 +DATA/rac/datafile/undotbs1.258.741330851 26 January 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  Incr 157 0 M DISK 00:01:17 668,51 26 January 11
  BP key: 162 situation: AVAILABLE Tablet: NO Tag: TAG20110126T151554
  Part name: +FLASH/rac/backupset/2011_01_26/nnndn0_tag20110126t151554_0.266.741453357
  List of defined backup data files 157
  Name of file LV Type cash SNA cash time
  ---- -- ---- ---------- --------- ----
  1 0 incr 1164414 +DATA/rac/datafile/system.256.741330849 26 January 11
  4 0 incr 1164414 +DATA/rac/datafile/users.259.741330851 26 January 11
  5 0 incr 1164414 +DATA/rac/datafile/example.264.741331067 26 January 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  158 full 17.70 M DISK 00:00:09 26 January 11
  BP key: 163 situation: AVAILABLE Tablet: NO Tag: TAG20110126T151723
  Part name: +FLASH/rac/autobackup/2011_01_26/s_741453443.268.741453451
  SPFILE included: Modification Date: January 26, 11
  SPFILE db_unique_name: CARS
  Control file included: cash SNA: 1164584 cash time: 26 January 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  159 full 17,70 M DISC 10:00:00 January 27, 11
  BP key: 164 Situation: AVAILABLE Tablet: NO Tag: TAG20110127T170842
  Part name: +FLASH/rac/autobackup/2011_01_27/s_741546522.260.741546531
  SPFILE included: Date modified: 27 January 11
  SPFILE db_unique_name: CARS
  Control file included: cash SNA: 1249721 cash time: 27 January 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  160 full 17.70 M DISK 00:00:10 January 28, 11
  BP key: 165 situation: AVAILABLE Tablet: NO Tag: TAG20110128T161437
  Part name: +FLASH/rac/autobackup/2011_01_28/s_741629677.282.741629687
  SPFILE included: Modification Date: 28 January 11
  SPFILE db_unique_name: CARS
  Control file included: cash SNA: 1325174 cash time: January 28, 11
  
  RMAN >
  
  The backup worked and looked good.
  
  After that, I removed all the subdirectories + DATA/PAP/in ASM with ASMCMD and I tried to rebuild the CARS database.
  
  SPFile restore failed with:
  
  
  RMAN > restore spfile to tag TAG20110128T161437;
  
  From restoration to February 20, 11
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 20/02/2011 13:44:57
  RMAN-12001: could not open the channel ORA_DISK_1
  RMAN-10008: could not create context channel
  RMAN-10003: unable to connect to the target database
  ORA-12514: TNS:listener is not currently of service requested in connect descriptor
  
  RMAN > quit
  
  
  Ist of reason:
  
  / Home/grid > lsnrctl status
  
  LSNRCTL for Linux: Version 11.2.0.2.0 - Production on February 20, 2011 14:40:49
  
  Copyright (c) 1991, 2010, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
  Start date February 20, 2011 10:16:52
  Uptime 0 days 4 h 23 min 57 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /u01/app/11.2.0.2/grid/network/admin/listener.ora file
  The listener log file /U01/app/grid/diag/tnslsnr/STB/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.2.5) (PORT = 1521)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.2.15) (PORT = 1521)))
  Summary of services...
  Service '+ ASM' a 1 instance (s).
  Instance '+ ASM1' READY State, has 1 operation for this service...
  'CARS' service has 1 instance (s).
  Instance "RAC1", BLOCKED status, a 1 operation for this service...
  Service "STRM" has 1 instance (s).
  Instance "STRM1" READY State, has 1 operation for this service...
  Service 'STRMXDB' has 1 instance (s).
  Instance "STRM1" READY State, has 1 operation for this service...
  Service 'TESTDB' is 1 instance (s).
  Instance "TESTDB", State LOAN, has 1 operation for this service...
  Service 'TESTDBXDB' has 1 instance (s).
  Instance "TESTDB", State LOAN, has 1 operation for this service...
  Service 'catdb' has 1 instance (s).
  Instance "catdb' READY State, has 1 operation for this service...
  Service 'catdbXDB' has 1 instance (s).
  Instance "catdb' READY State, has 1 operation for this service...
  The command completed successfully
  
  
  RAC1 ist now blocked.
  
  TNSNAMES. ORA:
  
  /U01/app/Oracle/product/11.2.0.2/Db_1/network/admin > discovers tnsnames.ora
  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0.2/db_1/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  
  RAC =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = scan.cluster.it.de) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = RAC)
  )
  )
  
  STRM =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = scan.cluster.it.de) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = STRM)
  )
  )
  
  OLAP =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = scan.cluster.it.de) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = OLAP)
  )
  )
  
  RAC2 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = scan.cluster.it.de) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = RAC)
  )
  )
  
  RAC1 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = scan.cluster.it.de) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = RAC)
  )
  )
  
  CATDB =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = stb) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = catdb)
  )
  )
  
  REPORT =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = scan.cluster.it.de) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = REPORT)
  )
  )
  
  LISTENERS_SCAN =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.11)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.12)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.13)(PORT = 1521))
  )
  
  OLTP =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = scan.cluster.it.de) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = OLTP)
  )
  )
  
  
  
  
  What have I done wrong? Can any Expert help me find a solution?
  
  Thanks and greetings
  
  hqt200475

  Hello

  Please when post msg/log/error/scripts using '{code}' formatting options described in the FAQ.

  http://forums.Oracle.com/forums/help.jspa

  + Node names stb, dwh
  + Name of the database: RAC
  +-The instance name 1: RAC1 on stb
  + Name of instance 2: RAC2 on dwh
  + Database catalog CATDB on stb
  + ASM-Volumm groups of DATA, FLASH

  RAC database has been configured with RMAN in CATDB:

   RMAN> set DBID 2329313036
  
   executing command: SET DBID
   database name is "RAC" and DBID is 2329313036
  

   RMAN> BACKUP   INCREMENTAL LEVEL 0 DATABASE;
  
   RMAN> list backup;
  
   List of Backup Sets
   ===================
  
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
   ------- ---- -- ---------- ----------- ------------ ---------------
   158     Full    17.70M     DISK        00:00:09     26-JAN-11
           BP Key: 163   Status: AVAILABLE  Compressed: NO  Tag: TAG20110126T151723
           Piece Name: +FLASH/rac/autobackup/2011_01_26/s_741453443.268.741453451
     SPFILE Included: Modification time: 26-JAN-11
     SPFILE db_unique_name: RAC
     Control File Included: Ckp SCN: 1164584      Ckp time: 26-JAN-11
  
   BS Key  Type LV Size       Device Type Elapsed Time Completion Time
   ------- ---- -- ---------- ----------- ------------ ---------------
   159     Full    17.70M     DISK        00:00:10     27-JAN-11
           BP Key: 164   Status: AVAILABLE  Compressed: NO  Tag: TAG20110127T170842
           Piece Name: +FLASH/rac/autobackup/2011_01_27/s_741546522.260.741546531
     SPFILE Included: Modification time: 27-JAN-11
     SPFILE db_unique_name: RAC
     Control File Included: Ckp SCN: 1249721      Ckp time: 27-JAN-11
  
   BS Key  Type LV Size       Device Type Elapsed Time Completion Time
   ------- ---- -- ---------- ----------- ------------ ---------------
   160     Full    17.70M     DISK        00:00:10     28-JAN-11
           BP Key: 165   Status: AVAILABLE  Compressed: NO  Tag: TAG20110128T161437
           Piece Name: +FLASH/rac/autobackup/2011_01_28/s_741629677.282.741629687
     SPFILE Included: Modification time: 28-JAN-11
     SPFILE db_unique_name: RAC
     Control File Included: Ckp SCN: 1325174      Ckp time: 28-JAN-11
  
   RMAN>
  

  The backup worked and looked good.

  After that, I removed all the subdirectories + DATA/PAP/in ASM with ASMCMD and I tried to rebuild the CARS database.

  SPFile restore failed with:

   RMAN> restore spfile from tag TAG20110128T161437;
  
   Starting restore at 20-FEB-11
   RMAN-00571: ===========================================================
   RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
   RMAN-00571: ===========================================================
   RMAN-03002: failure of restore command at 02/20/2011 13:44:57
   RMAN-12001: could not open channel ORA_DISK_1
   RMAN-10008: could not create channel context
   RMAN-10003: unable to connect to target database
   ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
  
   RMAN> quit
    
  

  What have I done wrong? Can any Expert help me find a solution?

  Everything you need is available as because you are restoring on site. That is, rman target / catalog xxx@xxxx

  Follow these steps:

  START a dummy Instance to run restore SPFILE with RMAN. This is necessary because rman are not running restore without instance.

  for example

  cd $ORACLE_HOME/dbs
  
  Just make a backup of current INIT.
  
  cp initRAC1.ora initRAC1.ora_curr
  

  export ORACLE_SID=RAC1
  
  rman target / catalog xxxx@xxxx/xxxx
  
  RMAN>  set DBID 2329313036; # This identifies in the catalog which database is used.
  
  # Now startup a dummy instance and perfom you restore.
  
  RMAN >  run{
   startup nomount;
  # Use one of the three options:
   restore spfile from tag "TAG20110128T161437";
  # or
   restore spfile from autobackup;
  # or
   restore spfile from '+FLASH/rac/autobackup/2011_01_28/s_741629677.282.741629687';
  shutdown immediate;
  
  startup nomount;
  
  restore controlfile from autobackup;
  
  startup mount;
  
  restore database;
  
  recover database;
  
  alter database open resetlogs;
  
  }
  

  Your spfile will be restored to $ORACLE_HOME/dbs, you should move it to before ASM.

  Kind regards
  Levi Pereira

• How to create a link to download a .psd or .eps file

  I'm trying to create a link to a file for a user to download .psd. Whenever I have a link to the .psd file, Dreamweaver wants to convert into a JPEG file. Is there a way to post a link to a .psd file to create the user to download this file? I am currently having files that retain the original Photoshop elements (layers, channels, etc.) used to create the file. I want to do the same thing with .eps files, but who have not tried yet. Any thoughts?

  Zipper.   http://www.7-zip.org/ - for windows.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB

• Orders for OCR and vote to restore backup file?

  We have 2 instance of node CCR on win2003 64 bit with three starts DATA, BKUP + FRA.
  We ordered new servers until then I won't have any instance test but that the production to work on.
  I'm taking care of files db, ctl, spfile, arcivelog files using RMAN.
  
  The vote and the file ocr is on raw disks.
  
  I went through the material of the cars, but my request is someone please compile the manner and the order to back up my rock and file with right to vote and in case of loss, what are the commands to restore files?
  
  Thanks in advace.
  
  [email protected]

  Hi Sami,

  Taking backups of the OCR

  %CRS_HOME%\bin\ocrconfig-C:\OCR_%data%.BKP s online export

  Restoration of OCR... http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/votocr.htm#i1016682

  Run the following command to add a location of OCR using destination_file or drive to designate the location of the target of additional OCR:

  %CRS_HOME%\bin\ocrconfig-Remplacer ocr destination_file or disc

  Run the following command to add OCR mirror location using destination_file or drive to designate the location of the target of additional OCR:

  %CRS_HOME%\bin\ocrconfig-Remplacer ocrmirror destination_file or disc

  Backup and recovery disks vote http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/votocr.htm#BABDJDHI

  ocopy with crsctl

  Kind regards

  Rodrigo Mufalani

• Run Disk Defragmenter has released more than 30 GB of free space!

  I'm not used to run Disk Defragmenter Windows very often, but in recent weeks I have been through the very large import of my cd collection process on iTunes. My 'C' drive has a capacity of 222GB and I was at 9.68 GB of free space. I ran WDD but after 18 hours, he had still not finished! So I decided to cancel defragmentation, and after checking my 'C' drive, I found to my great astonishment that I now had 42.8 GB of free space! Then, I downloaded the DiskDefrag Auslogics free and running. She performed in a few minutes and showed the Windows defragmentation had done most of the work but for some reason any had not finished. Anyone know why?

  I have decided to disabled Windows Defrag and will use in the future, the Auslogics version he gives information about the status of the defragmentation and seems to be much more effective and faster.

  However, I am very surprised by the amount of free space that freed the defragmentation process. I searched on various forums of pc and other posters have said the complete opposite to my own experience. The common consensus seems to be that defraging reduces the amount of free space on a drive rather than increase it!

  There also seems to be a difference of opinion on the amount of free space should be left on a hard drive to allow the computer to function effectively. I was a little more than 4% before I defragmented but I saw messages advising that we should let betweeen 10% and up to 50% (which seems to me to be silly!)

  I would be grateful for any help anyone can give me, in particular, why the defragmentation released (in my case) as much free space.

  A common mistake in logic. You assume that two things are related, because they are close in time.

  Defrag does not change the amount of disk space. It only increases or decreases the free space or used.

  Windows defragmentation runs every three days and optimizes the program and load the system boot. This is not controllable. It is also not a defragmentation of data file.

  Using another Defragmenter will fight with Windows.

  NTFS (and FAT32) resist fragmentation. Most fragmented files are log files and will fragment 1 second after defragmentation.

  Windows only writes files where there are a lot of space to write prevention of fragmentation. Do not fragment the files that do not change. Disk cache makes the fragmentation irrelevent.

  Any recommendation on the free space are based on the best estimate on the way an average person uses a computer. Lack of free space does not work computer until it has zero. However, most people like to save their work and some Windows watchdog is going spastic, just before that you can't do anything.

  As to why you have noticed a change in the use of the disc.

  1. system restore - this could be it.

  2 disk Cleanup - it will take place in itself is space is extremely low

  3 log files are created, deleted, written, etc.

  4. Windows automatically repairs physical disk errors. If defrag was having problems, you can check there is no car repair files.

  It's a way see what may have disk operations occurred.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  change c:\bootex.log

   

  What is this file exist with something in it?

   

  The following commands query the event logs.

   

  To start verification by using the name of the source for any version of Windows (because it varies).

   

  WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "Autocheck" or sourcename = 'Winlogon' or sourcename = "WinInit") get format:HForm

   

  To run chkdsk in Windows.

   

  WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "Chkdsk") to / format: HForm

   

  For warnings about disk problems detected during normal operations and automatic repairs by Windows at the time where the problems were discovered.

   

  WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "NTFS" or Sourcename = 'Disc') to / format: HForm

   
  Then to view the created file.
   

  Start "" "% userprofile%\desktop\DiskEvents.html"

   
   
  .
  --