Card 3G and Bluetooth stack question - tecra M4

Similar Questions

• SIM card slot and bluetooth conectivity.

  Hello!

  I have a HP Pavilion notebook pc g4-1104dx. When I bought in the States, they said that it had bluetooth and a slot for sim card. But I can't seem to find one of them. I tried a search, but to no avail.  Can you please help!

  Thank you!!!

  Hello

  You need administrator rights to do this. Try in a different way:

  • Click Start
  • Type services.msc and press enter in the search box, it can ask Admin password
  • Locate the BT service and start, also keep is started automatically.
  • Click OK/apply to come out.

  Kind regards.

• HDP Agent Device emulator and Bluetooth Stack for Win

  Hi all

  We have successfully installed the battery Bluetooth for Windows (Toshiba v7.10.01)
  We would like to know the steps on how to test the examples in the SDK from Toshiba with HDP Agent Device emulator?

  I found this doc from Toshiba:
  Have a look here:

  * How to get the battery Bluetooth TOSHIBA SDK *.
  http://APS2.toshiba-tro.de/KB0/HTD9602MK0000R02.htm

  I hope this helps!

• Satellite M40 - 114 bluetooth systemboard question

  Hi all

  I have question regardin my bluetooth and the motherboard.

  Center of Service Toshiba has replaced the motherboard in my laptop.
  I can't turn on my bluetooth for the replacement of the motherboard. FN + F8 doesn't work and bluetooth stack reports ' bluetooth device is not ready ". reinstalled XP via orginal Toshiba CD-ROM. But does not help.

  I discovered something strange, is that in the software sis sandra 2005, my laptop is reconignezed by satellite A40 PSA40U. They replace the motherboard with an old model? This could be the reason why the bleutooth no longer works?

  Your help/advice is necessary. Thanks in advance

  Hi phyl

  As much as I know Satellite M40-114 doesn't have Bluetooth and I can't understand this before the replacement of the Board of Directors the Bluetooth system was on board. I know that the M40-193 has a Bluetooth.
  Please check this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5071. There is an interesting discussion on the M40 and Bluetooth.

  Good bye

• DEH-P9800BT & P1610 & bluetooth stack V7

  Hello.
  I have a problem during the upgrade to the latest version of the bluetooth stack.
  I would like to ask for your help.

  Before you begin, let me explain my bluetooth environment.
  ----------------------------------------------------------------------------------
  1 car CD receiver(w/bluetooth) - Pioneer DEH-P9800BT
  (you can find info on the model of: http://www.pioneerelectronics.com/PUSA/Support/CarAudioVideo/In-Dash/CD-Players/ci.DEH-P9800BT.Support)

  2 Fujitsu notebook - P1610

  3 Bluetooth stack V6.4 & 7.0
  ------------------------------------------------------------------------------------

  1. when I use version 6.4.xx of the bluetooth stack. (Bluetooth connection has been already done)

  -To start my car. (Then audio receiver turns)
  -Boot up my laptop.
  -After finished booting, the bluetooth stack will automatically connect car stereo.

  2 * However, when I use to know version 7.0.xx, bluetooth stack doesn't connect audio automatiquement.* car
  * And there's a / V automatic connection is recherche.*

  Given the differences between two versions.

  1. in the case of V6.4, there was a control point (square box) on the automatic connect feature. (right-click on an icon--> detail)
  2. in the case of V7.0, there is no. New menu option has been created. Here, I can adjust automatic connection interval (for example, 1 min)

  In V6.4, everything is ok except it isn't an option on A / V the automatic connection.
  In V7.0, has / menu automatic connection V exist. * But doesn't auto-connection and bluetooth stack doesn't connect automatiquement.*

  Help, please.
  Thanks in advance.

  Hello

  Could you please try everything first start your laptop with a stack of BT and after that start your car?

• Conflict between Toshiba Bluetooth Stack and drawers of power on Tecra M5

  There seems to be a bug in TosBtShell.dll and hope this alert could get fixed in a future revision. Possibly it will save others the effort that it has cost me to track down the problem on my Tecra M5 new. I had to give up Toshiba Bluetooth Stack and now using XP SP2.

  When the Bluetooth Manager is running, TosBtShell.dll updates the element ' Bluetooth' beside ' send to ' in the context menu of files and folders. Unfortunately it is in conflict with the shell software improvement Power drawers http://www.dynamickarma.com/powerdrawers.htm that I defer to speed up access to my files on the computer. This software allows you to right click on a folder to view its contents in a list. Then you mouse to any folder in the list and give him also as a sublist - and so forth as deeply as you want until you reach the folder or file you want. Right click on an item in the waterfall and you get a list of useful options. However, if the Bluetooth Manager is running when you do the right click, power drawers breaks down and you must close and re-open explorer.exe to recover.

  The conflict stops if you remove "to Bluetooth" in the context menu of files and folders. I proved this by using ShellExView from Nirsoft http://www.nirsoft.net/utils/shexview.html to disable the registry key "Bluetooth File extension" [sic]. This key is associated with the C:\WINDOWS\system32\TosBtShell.dll and the CLSID {6BEF3D0B-53F0-4b0d-B91C-C19ED3D4C9D1}. Unfortunately the registry key back again every time that you restart the Bluetooth Manager.

  David Tong.

  Hello

  Thanks for the information.
  However, on the Toshiba Bluetooth page you can always notice whether or not the new version of the driver BT is available.
  http://APS.toshiba-tro.de/Bluetooth/

  I recommend you to visit this site regularly

• Toshiba Bluetooth Stack and InTheHand library questions

  Hi all
  I'm developing a bluetooth software using visual studio. I understand that, to do this, I need to use libraries of InTheHand of Microsoft.That library only supports Microsoft Bluetooth Stack, so I would ask if Toshiba Bluetooth Stack are compatible with the InTheHand library so that I can develop my application? Thank you very much.

  Toshiba Bluetooth stack has its own one. It check the FAQ section in the following Web site:
  http://APS2.toshiba-tro.de/Bluetooth/

• Tecra M3 - Bluetooth Stack versus Bluetooth Monitor?

  Previously, had a Tecra 9000 and never got bluetooth works smoothly and seem to have the same problem with nine Tecra M3... (maybe its me!)

  I checked and updated all the drivers downloads and had problems to any Bluetooth (M3 for IPAQ 3970). Found out that if you uninstall Bluetooth Stack and reinstall it the battery but do NOT install Bluetooth Monitor, everything seems to work (as far as I know). Prices Bluetooth Stack Bluetooth Monitor alternative (the installation guide does not suggest it)?

  Thank you all

  JonBer

  Hello JohnBer

  The only thing I can tell you about Bluetooth technology, it's that I use Bluetooth Toshiba Stack to connect to my mobile phone from Siemens. I sometimes use it as modem to check mail short and fast. I have no problem and the connection is fine. I use the wizard of a mobile phone is always properly recognized and I can use it without problem.

  If you have some problems to make the connection between your device and some external device, it can be caused by some false setting. To make good configuration between laptop and mobile phone was not easy. As I said to check all the Bluetooth settings on both units.

• Stack Bluetooth hang up Tecra S2

  Toshiba Tecra S2, PTS20E-18S032GR, 01/30/2006 purchase model number
  link to the description:
  HTTP://DE.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=DE&PRODUCT_ID= 106134 & DISC_MODEL = 0

  I have the problem, that the bluetooth Stack/Bluetooth Monitor (data "TosBtMng.exe") CPU-Auslastung of 97% by all other programming block and use all the system's performance.

  Here s screen Shoot.
  http://www.schreiterweb.de/t/tecra_15.jpg
  http://www.schreiterweb.de/t/tecra_16.jpg

  Hello

  I checked with my Tecra M1 but in my case, the mem usage is a little bit lower (5 468 K) and the CPU is 00. I put really know why this happen, but the fact is that in your case it on 100 active processes running. I work with my Tecra very intensively and did no more than 60.

  Back to the problem: have you tried to reduce the running process before enabling BT? Perhaps is there a resource conflict. Sorry but I have no other idea.

• HP dv6-1355dx: Wifi and bluetooth card updated hp dv6-1355dx

  I want to improve my wireless Bluetooth card what you need. This one will work Intel Centrino Wireless-N + WiMAX 6150 (633817-001) >

  Based on the HP Pavilion dv6 Entertainment PC - Maintenance and Service of Guide for your computer, the following WiFi cards are among the options of origin in dv6 product range;

  Atheros 9285 G 802. 11b / g (more than Bluetooth, with antennas) #518436-001
  Atheros 9280AGN 802.11a/b/g/n (over Bluetooth) #518437-001
  Broadcom BCM4312 802. 11 b / module WLAN g (over Bluetooth with two antennas) #504593-003
  Module WLAN 802.11a/b/g/draft-n, Broadcom 4322 AGN (and Bluetooth) #518434-001

  While you can try the Intel Centrino Wireless-N + WiMAX 6150 (633817-001) wireless card, there is no guarantee that it will work. It is vary possible that only cards contained the MSG from HP above will work on your computer. This is known as the 'white list', and if the card is not on the white list, the computer stops with a message prompting you to remove the card and use a card authorized.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• How to uninstall TOSHIBA Bluetooth Stack and all the drivers?

  Hello! I installed TOSHIBA Bluetooth Stack of [here | http://aps2.toshiba-tro.de/bluetooth/?page=download] or, more precisely of the [here | http://aps2.toshiba-tro.de/bluetooth/?page=download-toshiba] (8.00.12 |) Windows 2000 / XP / Vista / Windows 7 x 32 | Multilanguage) (_I have windows xp_). I tried to connect my phone with it, but it didn't work the way I expected.

  As I did not, I tried to uninstall, but I had problems there too. :( I was able to uninstall it from the Control Panel / Add-Remove programs and I also uninstalled in Device Manager, but it does not work too.

  It is more drivers, and they are all on my system: in my departure much I option 'connect too', in the Panel, I "Bluetooth Local COM" and Bluetooth devices Manager also lights up while windows starts... I had to remove all those things, but I don't know how? Help, please!

  Also, if someone could explain to me how to transfer data through your Toshibas Bluetooth, that would be nice too - in this case I would not uninstall it. Only in this case when it seems useless to me, these drivers are only bothers me. They spread throughout the system as someone wanted to hurt me! xD

  Thank you once again, people! :)

  * EDIT *: I now have to stop bluetooth manager executed departure while windows starts, so now it's less a problem. I don't particularly want some unnecessary processes slow down my computer. On the other hand, there is a problem that I have not mentioned - the computer restarts it self without reason in some cases. However, it seems that these reboots are associated with uninstalling programs - especially during attempts to uninstall toshiba bluetooth stack. Anyway I'll examine this reboot problem a bit more tomorrow perhaps it relates only to install/uninstall these drivers toshibas.

  Post edited by: samir89ns
  the reason for the change: I forgot to say certain things

  I use laptops Toshiba and Toshiba BT for years and I've never had no problem to connect my mobile phone using the BT software. I use it mainly to transfer data (photo made by mobile phone).
  It is so easy to make the connection between the computer laptop and phone so I n t understand why you have all these problems.

  If you n t need it disable Autostart BT software.

  You have for Toshiba laptop?

• New: Tecra S1 and BlueTooth

  Hello!

  I got my S1 last week. After starting it, it had BlueTooth Software etc installed already, but I haven't used STI. After installing WinXP SP2, I can't use.

  I tried to install the Toshiba Stack 3,10, but after 56%, it requires that I turn on the BT device. Accordingly, I have set the switch on the front side and press FN + F8 and press 'ok '. But after a minute or two, it keeps demanding that I turn on the BT device.

  My model number is PT831E-67CUD-GR.

  Any ideas?

  See you soon

  Lutz Gollan

  Hi Lutz

  AFAIK utility TOSIHBA Bluetooth does not work properly with Windows XP SP2. Windows XP SP2 supports the Microsoft Bluetooth stack. If the user has not installed the utility and the TOSHIBA Bluetooth stack on the system, then the Microsoft Bluetooth stack will be installed with Windows XP SP2. After that the TOSHIBA Bluetooth utility does not work with the Microsoft Bluetooth stack.

  I use Bluetooth too and there is no problem. Before you start Bluetooth Stack installation switch on wireless connection and with FN + F8 to compatible Bluetooth switch. After this try to install it again.

• Mouse Microsoft Wireless Presenter 8000 and Toshiba Bluetooth Stack

  Some of the specific features of the MS Bluetooth Mouse will not work with the latest Toshiba Bluetooth Stack: magnifying glass, digital ink...

  The other functions of this mouse (and the remote control works too) work perfectly. The magnifying glass, ink, etc., work only if the MS USB controller provided with this bluetooth mouse is plugged.

  Lots of material and forums sites talking about this problem, that is to say at the end of this page: http://www.hardware-pacers.com/pages.php?catType=r&pid=352&id=968&pageX=on

  Is there a chance to have these functions (magnifying glass, digital ink...) working with a future version of the Toshiba Bluetooth stack? Any idea of a delay? Or any idea of a tip to have it working today?

  I have a MS IntelliMouse. MS has delivered additional software called Intelli-point with it, that supports all the extra buttons of this specific mouse. So I set up my mouse with the stack of Toshiba and installed the software Intelli-point after him. Now all the buttons work.

  So I guess the Wireless Presenter also comes with a software taking in charge additional functions of all what this mouse.
  If so, do you have it installed?

• Questions of Qosmio X 500 - 10U - camera and bluetooth

  Hello

  After the installation of:
  03/01/10
  Update the BIOS
  Toshiba OS independent 2, 20 - WIN World Wide
  My qosmio x 500 - 10v has problems with the camera and the bluetooth stack.

  Alert only tool of Bluetooth: Bluetooth is not ready!

  Now, I hope, that a newer version of the bios will solve these problems.

  (sry 4 my bad English)

  Jake

  If BT is not ready don't forget that it is enabled correctly.

  The WLAN switch on the position WE (orange LED should be ON) and use the FN + F8 key combination to activate the BT module.

  What is the problem with the webcam?

• Question about Toshiba Bluetooth stack V.4

  Hello

  We have a laptop Fujitsu Siemens P7120 requiring the Toshiba Bluetooth stack located at http://aps.toshiba-tro.de/Bluetooth/pages/download.php

  When we install it in silent mode, installation occurs however the Bluetooth does not initialize to the exchanger of information Toshiba Bluetooth is launched!

  Is anyway to complete installation without this another step?

  You must use the BT-stack of the FSC. I also tried to install an OEM version of the BT-stack from Toshiba, but in this case, there was limited time. So check the item of menu "in context" to get further details.