New: Tecra S1 and BlueTooth

Similar Questions

• Card 3G and Bluetooth stack question - tecra M4

  I'm having a problem getting a 3G vodafone card to work with a Toshiba Tecra M4.

  The problem is that the card won't install properly on this laptop (with exclamation point appears in the Device Manager and additional ports appear under "ports", but none regarding 3G card - it should be two features of card 3G appearing in the section "ports" in the Device Manager - at least there on the Portege) card works fine on a Toshiba Portege.

  The advice I received from the supplier was to disable the bluetooth card in the Device Manager, and then uninstall the Toshiba Bluetooth stack, then delete Vodafone software, reboot, and reinstall the Vodafone software. Finally to reinstall the bluetooth stack.

  I followed these instructions and everything seemed ok (this appararurent device to be picked up correctly in Device Manager) until I reinstalled the battery bluetooth how I was in the box start.

  Is this a known issue with Toshiba Tecras and you know any solution?

  Hello

  As far as I know that there is a new update for Toshiba Bluetooth Stack version 4.00.23
  I recommend you to test. Perhaps the new version solves the problem.

  In addition, you can visit this Web of Toshiba Bluetooth site:
  http://APS.toshiba-tro.de/Bluetooth/

  You will find a contact form to get in touch with Toshiba Bluetooth support.
  There you can descript comments.

  Good bye

• Tecra A2 - new drive HARD and have no idea of installing the drivers of Windows XP Home edition

  Hi all, have not been here in a while...

  Where should I start... Have Tecra A2 and the HARD drive died on this issue... was not able to recover whatever it's him so bought a new HARD drive.

  Rather than taking it to a repair shop, I would like to re - install Windows XP myself, save money and have a clean install.

  I know that I have to download the drivers from downloads for Tecra, but haven't a clue as to who and the most appropriate.
  Could someone be so kind and point me in the right direction to get my operating system again?

  Thank you.

  I agree with you. Do clean install of Windows XP Home edition and install all the drivers, Toshiba tools and utilities following this order of installations:

  Windows XP SP2
  Chipsets Intel (r) software installation utility
  Intel (r) 82852/82855 GM/GME Graphics Controller V6.14.10.3722
  TOSHIBA common modules
  TOSHIBA Hotkey Utility for display devices
  SigmaTel Audio WDM Driver
  ALPS Pointing-device Driver
  TOSHIBA-button On / Off Utility
  Launch and TOSHIBA Touch
  TOSHIBA Software Modem SM2138ALD04
  LAN driver
  Atheros wireless network adapter
  TOSHIBA Power Saver
  TOSHIBA utilities
  TOSHIBA console
  TOSHIBA controls
  TOSHIBA ConfigFree
  TOSHIBA PC Diagnostic Tool
  Driver DVD-RAM
  CD/DVD Drive Acoustic Silencer
  View of TOSHIBA for Ext.Monitor service

  I hope that everything will be OK and you will be able to use Windows XP Home on your Tecra again.
  If you have any other questions please let us know.

  Good luck!

• Tecra M6-EZ6612: Bluetooth and WLan operate at the same radio frequency range

  Hi all

  I have a laptop that is Tecra M6-EZ6612...
  I have a problem that when I install the bluetooth I have a massege indicating a conflict between the wireless and bluetooth...

  Two of them are working in the same radio frequency range!
  So, I wonder how I can change the frequency range of the bluetooth device? !!!

  Not like about it. Material Bluetooth v1.2 or v2.0 have included technology called AFH = "Adaptive Frequency Hopping" that tries to avoid conflict with WLAN. It can only be a problem if you have a very old hardware BT (before 2004).

• New T410 - what happens if I do not get webcam and bluetooth?

  I bought a new T410i and I chose to do not to get the webcam and bluetooth. I was wondering:

  (1) if I don't have the webcam, there will now be a useless slit / hole at the top of my LCD screen where the webcam shouldve been?

  (2) I also don't have bluetooth. The middle light will now be useless? Also is there anything that is unnecessary as a result? for example, one of my FN keys (F5?) and is there a bluetooth radio physical switch that is useless?

  I'm a design nut, and these things upset me.

  Hi echelon6,

  Welcome to the Lenovo Forums.

  Interesting concern you have there. Here is a photo that I took on my T410 with webcam and my colleague who doesn't have a webcam

  Without Webcam

  

  With Webcam

  

  So basically it looks that the holder of the 'webcam' is replaced by a space 'Council' or of some sort.

  Regarding the Bluetooth, I'm not sure that I have not a non Bluetooth T410 at the office. It should be a light indicator. (Not sure)

  FN + F5 will continue to operate as it also controls the WLAN and physical switch works just as well cause it also controls the WLAN.

  I hope this helps.

  JMT

• Windows Acer v3-571 2012 new updated checked all 10 drivers on wifi and bluetooth does not

  I have all ways been an Acer since 2004 my Aspire 2012 v3-571 worked well windows 8 8.1 now am windows 10 pro, but I can't find the drivers to run WiFi and bluetooth.

  I checked all your drivers on site for my model from 2006 to 2014 and the only driver that is in the 16/06/2015 is Realtek High DEfinition Audio.

  You can send Martin alieu were I can it please.

  never had this happen to me

  Thank you

  E.Taffa

  GOOD DAY MY FRIENDS, THIS IS THE DAY I LOOKED FORWARD TO KEEP FROM THE START.

  I WIPE LAPTOP WIN 8.1 AND NOW WIFI AND BLUETOOTH I HAVE TRIED TO NO DIFFICULTY PASS.

  WINDOWS 10 UPGADE WIN 8.1 INSTALLATION 174 WHILE I STARTED DAY THEN YUST BEGINNING UPGRADEING AS I THOUGHT IT CAN'T GET ANY WORSE AFTER UPGRATING TO WINDOWS DOWNLOADED 10 V3-571 2012 WE WIDOWS 8.1 HAS NOT, I CHECKED WINDOWS 10 EVEN I RELOADED TH YUST EVEN I WAS LOADING ALL MY APP AND THISWENT ISTALLING RESTART I CLOSED TOP PC YUST AND WENT OUT TOP PC OPEN BACK CAME I HAVE 2 LIGHTS BLUE AND 1 YELLOW , I CHECK IT WI - FI IS THE BLUETOOTH IS ON YOU, THE BEST.

  Best regards

  E.TAFFA

  PS show me how to give kudoo or what his name, I give the amount of maziment

• Tecra S2: No bluetooth connection is possible - why?

  Toshiba Tecra S2
  Model PTS20E-18S032GR number
  purchase 30/01/2006

  There is no bluetooth connection possible. I have the connection in front of the laptop button 'ON' and the hodkey + F8-online bluetooth support 'ON '. But I have every time an error with the 'Bluetooth Manager (v3.01.03)' bluetooth software-online button 'new connection '.
  Error message: "Bluetooth is not ready."

  I can not connect a practice or a Bluetooth headset. I made a mistake, or I forget somethink?

  Hello

  AFAIK that Bluetooth is optional on the Tecra S2 and is depending on the model purchased.
  The switch at the front of the laptop is a wireless communication switch, and it has nothing to do with a Bluetooth device.

  In my opinion, you should check if the Bluetooth is available on your device. Check the Device Manager. You can also check the bottom of the unit. There you should find a Bluetooth label. If the label is available if the device has Bluetooth

• GPS, Wifi and Bluetooth problems

  So I have an iPhone 6 running on IOS 9.3.4 and have had problems with the GPS and the strength of wifi connectivity and bluetooth for a while now.

  First of all, the GPS.  It does not work.  When I run the maps or google maps on my device and the input an address the app can give me a written plan, location, but will not show me on a map.  He'll start road to everywhere where I go and tell me to start position, for example, to the North on the road on that I am, but the arrow does not follow me and tell me when the turn or where I am.  Occasionally, he has a message of guidance down with a spinning wheel and then, after a few seconds, disappears.  I tried to reboot my device several times, I have reset the network setting, I reset all of the settings, I backed up my phone, reset it and recovered save him.  Nothing has worked.  I was at my local verizon store and received a 'new' (its definitely refurbished) phone and the problem persists on the new phone.  I reset the phone to factory setting without content, set up as a new phone and tried the cards again, thinking it might be a problem with the back to the top.  It still does not work.  I'm perplexed right now and do not know what to do/try.

  Second, wifi and bluetooth connectivity is terrible.  I can only receive a wireless signal so that in very close proximity with the router.  I tried to different houses/companies and it is the same question.  However, bluetooth is just as bad.  I use headphones wireless, and go to the gym/go for the route with them.  I used to be able to walk around the gym without my phone and have connected the headphones, but now I can't have my phone 2 feet of the appliance without the music being agitated (bad connection).  I'm really irritated that I cannot understand this point and that he can't seem to find a fixed solution online.

  If you have just updated to iOS 9.3.4, which I didn't even know still shone, so maybe it's a bug that comes with the update. However, your problems seem to follow a trend, you can not far from a source of connection and now a signal. It is perhaps because the necessary components for the Bluetooth, GPS and WiFi signal are damaged or defective. Have you dropped or spilled liquid on your iPhone recently?

• Tecra A4 and Win7 - problems with PCMCIA card driver

  I've recently updated my old laptop Tecra A4 - PTA42E - (in great condition however) for Windows 7 and it is now in the best shape ever except for the PCMCIA card. In fact, to have Windows 7 installed I had to rename the pcmcia.sys and pcmcia.inf files during the installation (to .old or .bak) otherwise the new operating system would not start. The same problem has been experienced by many other users Tecra A4 and the solution is available in a number of forums.

  Although I use no more than the PCMCIA card slot, I want to fix this for a reason: If, in the future, I need to re - install Windows 7 for some reason any on this laptop, I have to repeat the same process - rename the pcmcia.sys and pcmcia.inf during installation, in addition, the new operating system does not start.

  I do not understand that the original drivers from the card slot (Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7, but it is there any updated driver that works for windows 7? And if there's a how can I replace the old drivers in my system so that in the event of re - install Windows 7 I will not have to go through the same process? TI site is no help, and Toshiba does not all drivers to download.

  Last but not least, if there is a driver available, I used the card slot for 2 ports USB 2 or 3 additional which are really necessary.

  Thanks to the forum, in advance

  Hello

  The pcmcia.sys and pcmcia.inf files are part of the Windows System.
  This driver isn't provided by laptop manufacturer, but it is a Microsoft internal driver.

  You mentioned that the pilots of the original card slot Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7.

  To my knowledge, this driver does control not the PCMCIA location but this driver controls the card reader that supports the MMC card, SD card, card xd picture card, SM card, Memory Stick and Memory Stick Pro.

  However, the Tecra A4 is very old model of laptop. The driver will not be updated for this camera and it looks like Windows 7 drivers never had to be released the driver Toshiba UE

• New Tecra A4 - 170 - slower than my old Tecra 8000

  Hey!

  Since yesterday, I have my NB again at home and so far, I'm happy with it!

  It has a processor M760, with 2 GHz, 100 GB HDD, FSB 533 and such - but it is slower than my old Tecra 8000 with PII and 366 MHz with only 8 GB of HARD drive.
  Y at - it a tip or something I should fix, or is it quite normal when there is now software for nearly 10 GB (nothing special, just the software more pre-installed desktop, antivirus and internet, no games) on this subject?

  Would be happy to help!

  Meike
  :-)

  HI Meike,

  Your new Tecra running the same OS as your old?

  I would be interested to know if slow is during the initial loading of the operating system or if it appears when you actually use the system.

• Tecra M9 and M10 wheel Volume does not not under Vista

  Hello

  I hope that someone can help me, I'm Vista using Microsoft Deployment Workbench deployment for Tecra M9 and M10 material and the volume knob will not work. I added the drivers of Toshiba in Deployment Workbench, while they are presented the machines via Plug n Play, volume button do not work. I also deleted the drivers of Deployment Workbench and installed the drivers manually on the machines, this installs fine, but volume knob will not work. I have two development servers, Win Server 2003 and Win Server 2008, the two do not run successfully the pilot slots.

  If I deploy a standard Win Vista Enterrprise 32 bit OS of DVD hardware, with any driver when it is installed, the volume wheel works. I can then manually install the audio driver and the volume button still works. But if I deploy the same exact DVD based OS of Deployment Workbench, the volume knob does not work?

  Any help would be greatly appreciated, as this is doing my head and holding up the deployment of the new image.

  Thank you
  Paul

  Maybe you are trying to install the driver Audio of M9 M10 or vice versa?

  You install the driver Chipset Intel and value-added package first? (this is important)

• Explorer freezes on new Tecra M5 T2600

  When you use Windows Explorer or Internet Explorer on the new Tecra M5 T2600, the active window in Solution Explorer or IE freezes often when you browse a web page in IE or navigation in local folders using the folders pane in a window of Windows Explorer. The window remains insensitive, but all other windows, the desktop and the Start Menu, etc. are all very well. Simply right click on the taskbar and selecting the Task Manager instantly causes the frozen window jump into life and display the IE link or folder selected at the time of the freeze.

  To ensure the image provided was not the cause, the disk partition has been deleted and Win XP Pro with Service Pack 2 has been re-installed itself, followed by the apps & drivers on the CD-ROM tools Toshiba, in the recommended order, including all the provided MS QFE updates. None of the additional applications have been installed and the problem is still present.

  Any help would be greatly appreciated.

  Hello

  Well, in this case, it is not easy to say why it happens.
  You suggested that you don t use the Toshiba recovery image.
  To be 100% sure that this is not a malfunction of the software, you must use the Toshiba Recovery CD. After this installation, you can test the laptop and check if this strange problem occurs again. If it isn't so I guess that this happened because of your new installation.

• HP 15-ac025tx: Please help to find the right driver for Wi - Fi and Bluetooth

  HP 15-ac025tx

  MODEL: M9V00PA #ACJ

  OS: Windows 7 (64-bit)

  Hello

  Would you be able to help with the link to the drivers for my laptop model mentioned above.

  1 WiFi

  2 Bluetooth

  3. the screen

  These are the elements located in the exclamation point (!) in the Windows Device Manager:

  -Graphics cards

  AMD Radeon (TM) R5 M330

  -Other devices

  BCM43142A0

  Network controller

  Acquisition of ICP data and Signal Processing controller

  Unknown device

  Many thanks in advance,

  Anish

  New Delhi

  Hello:

  You need these drivers for the wireless and bluetooth...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827 & swItemId = ob_145419_1 & swEnvOid = 4058

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_154511_1

  Graphics card: first install the Intel driver and restart.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72651.exe

  Then, install the graphics driver amd and restart.

  This package provides the graphics driver AMD/Intel switchable high definition (HD) for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance.

  File name: sp71254.exe

  Acquisition of ICP data and Signal Processing controller:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71262.exe

  Unknown device is probably in need of this driver...

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

• Tecra M10 and Express Port Replicator, no DVI to Toshiba 20 "LCD output

  Hello

  As the bed of the subject line, I will put up a new Tecra M10 with the Express Port Replicator and monitor LCD Toshiba Tekbright 20 ".

  The system works on Windows XP, and the ordinary VGA connection on the port replicator works fine when connected to the external LCD.

  However, there seems to be no way to get the DVI interface on port replicator, working on the LCD.

  I tried to run this utility, and it does not detect the DVI monitor at all.
  http://www.entechtaiwan.com/util/moninfo.shtm

  I have updated graphics drivers Intel for XP, form the Web from Toshiba site and also have the latest version of the BIOS.

  Any ideas?

  Thank you very much
  Paul

  Hello paul

  Your Tecra M10 has DVI port?
  Replicator port is not some sort of converter and it will be just a loop through the signal directly from the laptop.
  If the computer laptop doesn t supports DVI output you cannot expect to get signal from the port replicator.

• Tecra M9 and Express Port Replicator - display flicker

  Hi guys,.

  I'm having some problems with my new Tecra M9! After that laboriously installed all the drivers and ending up with a nice clean install, I am now subject to constant headaches!

  I run a Setup dual monitor with my main monitor being a LG 19 "and the second screen being my Tosh laptop screen. When I move anything or anything open my main screen flickers like mad! I swapped the primary monitor with another screen (make and model), and it still happens! If I connect the main monitor in the laptop VGA port and run the same setting of the screen, its fine, but the second I put it through the docker it still sparkles! I also checked running a single screen (an external monitor) it still happens!

  I've updated all my drivers to the latest version without any doubt the GFX and BIOS.

  I can't be the only person having this problem, I have at least 3 of Tecra M9 who have the same problem and I can't buy laptops additional I need till remedy! Help!

  Your Andi

  Hello Andi

  Before starting any discussion can you please tell us a little more info on pre-installed OS? You wrote about installing the drivers. Why?

  As I know your laptop comes with the own operating system preinstalled. Why you do this again? And what operating system you are using?