Card dance effect

Similar Questions

• reversal of a clip (card flip effect)

  Hello

  There are several ways to code the card with pictures and movies flip effect, those that I found is very complicated.  Is it possible to use the card flip on a clip in a simple way?

  any help is very appreciated,

  Sam

  As a simple explanation of how do it, all you have to do is to change the rotationX or property rotationY movieclip of 180 degrees (use a Tween for a gradual change).

  If you want the effect of turning over a card, then you need to have both sides of the card in the movieclip also separate movieclips.  No matter which side is indicated first must pass over the other side and be made invisible to halfway through changing the rotationX or rotationY property.

• Problem Nvidia graphics card after effects cs6...

  Hello, here I have a problem with your legacy product, recently, I buy a new laptop for video editing, but unfortunately, the software will not use my graphics from Nvidia and she use my default graphics card (intel hd graphics card)

  my pc:

  i5 - 4200 H 2.80 ghz - 4 processors (3 m Cache, up to 3.40 GHz)

  NVIDIA GEFORCE GTX 850M 2 GB

  12 GB of RAM

  Drive hard 1 TB

  I need your help thank you

  You must disable the chipset of intel in the BIOS / EFI.

  Mylenium

• Split / break a video to several equal parts and make them come together.

  Hi all

  I'm sorry if the title is not very understandable. Basically, I would like to make a sort of transition. I imagine a video, I want to break/split equally (maybe 8 or 10 pieces), to make each party meet with each other at the end of the animation (as an anime puzzle actually) to make the video.

  Is it possible to do? I saw stuff on the use of Illustrator, make a grid and so on, but I hope there is an easier way to do this.

  I guess it should be both of the 3D layers.

  Thank you in advance and sorry for my English.

  Card dance effect

• I was promised 5 free plugins with purchase of first training pro / total bundle... dance and clearing the Board, foam, burst... where I can find for download

  I was promised 5 free plugins with purchase of first training pro / total bundle... dance and clearing the Board, foam, burst... where I can find for download

  There is nothing extra to download, these effects are included in the installation of After Effects.

  They are in these categories of effects:

  Simulation >

  Card dance

  Caustics

  Foam

  Shatter

  Wave World

  Transition >

  Card Wipe

  Generate >

  Radio waves

• Flag animation

  I'm doing an animation of flag with effect on fractal noise and card of the dance, the animation is good but the deformation of the card dance blow the flag on the metal of the flag stand.

  How a limitation to the animation to make the move of flag but not fix it on the metal support?

  Thank you and sorry for my English.

  a way to make of this off - since the movement that appears is based on intensity change the brightness in the plan of the fractal, you need to make changes in the plan of the fractal so that the side pole of the card will have no changes in brightness. Just add a solid gray with a mask of feathers on the side. This will stabilize the most on the side of the indicator, the rest will be covered by the pole itself, as shown here in this tutorial:

  Create a flag waving with After Effects on Vimeo

  Go to 07:09

• T400 with XP x 64 problems

  Hey,.

  I installed Windows XP Professional x 64 on my T400 (NM51JHV aka 2767-1JG), I need this because I added 2 GB of ram to my laptop, so I need an OS 64-bit for the use of 4 concerts. My additional supplenments for the standard config is an SSD instead of HARD drive and I use a 256 Mb SD flash card in the E: drive (where I store all temporary files, including those that is created by windows, for example the internet web local cache...)

  I have some problems with my config, I hope someone can help me with them.

  (If no, in this case, at least I collect a few questions - perhaps ordinary-):

  1, OSD does not work (I installed the keyboard shortcut and drivers OSD of course). Y at - it Windows XP 64-bit support for that?

  2, logins does not work on 64 bit platform... No work around?

  3, the Authentec fingerprint reader has no driver for Windows XP 64 bit. Is there a third-party driver?

  4 and most importantly: the laptop cannot go to sleep or turn off your computer. When I go to sleep or shutdown, Windows removes a dialog box 'Préparation for sleep' and nothing happens...

  (5, 3.14 update system crashes with an error, something like "an error has occurred during the searched data" or data collection)

  Other things seems to work perfectly.

  Thanks in advance for your help appreciated.

  I hope that there is someone in my shoe.

  Vista: Same 32 or 64 bit edition I know it is taken in charge and work, but my basic point was intended to prevent install Vista on my laptop. It is a theoretical question why I avoid using Vista (for example: a BONE that is using a GB of ram at idle is not an OS which is a Pinball game nice), and basically I want to use my laptop on my place of work and at home too. At work, Service Desk management not recommended Vista and which is not supported

  I'm sort of man who finds a standard WinXP too slow and nLiteing it.

  Meanwhile I use Debian Linux 64-bit on my secondary partition and everything works except the fingerprint reader (the driver is under development and due out in December)

  SD: I found the same thing, I use same SD to prevent unnecessary disk writes to my SSD it's much slower than the SSD... Best SD cards has 15 Megs/sec read/write speed is nothing to my SSD that can provide 80 - 150 MB/sec read and 80 MB/s write speed...

  SD card is not related to my problem of the judgment, when I removed the card the effect was the same. But it was a good idea, thank you.

  Fortunately, I managed to solve my problem of shutdown/restart/sleep.

  I found a Microsoft the KB article that said some pilots of the unit cannot be unloaded perfectly, there is a fix that is not help for me, but I reinstalled the driver for the camera of the Loenovo and the problem has been resolved with this.

  I'll read the ThinkPad SuperGuide, I hope that there will be a lot of useful information.

  So currently my status is:

  -The dial-up connections, the system update, the OSD is not supported on this platform. I accept it.

  -There are 3 "unknown device" in Device Manager the (must be Intel 4500HD video card), verification of PCI IDs and understand what they are.

  -Driver modem's failure during installation, but I really need a modem.

  -Director presentation gives an error 'no permission to write the Temp' (there ), and the installation fails.

  With all this it is not perfect, but good enough to work.

  Thanks again Aggothelf.

  Thanks for your reply.

• Audio into keyframes Question?

  I want to use Audio images key Assistant to a Knoll fire brighten up to the beat of the song, but if I have relatives on the Amplitude Audio for the 'brightness' layer creates the Knoll Light, the light mound is very dark, because keyframes "Audio" both about 20, where as the Knoll light should bounce around 100.

  So basically im asking if there is a way to have the bright Knoll light enough, while using the Audio into keyframes. Thank you!

  Card - After Effects CS5

  Win 7 64 bit

  As Todd said, it is a linear expression. It looks like this:

  linear(value, 0, 20, 10, 100)
  

  To understand it begins on the first and read this sentence carefully.

  (take the value of your first variable, from a minimum of 0 and a maximum of 20 and create a new linear range of values of a minimum of 20 and a maximum of 100)

  You could also write expressions that use ease rather than linear. It changes just the graph of a line to a curve.

  To make all this work, you will need to apply the expression of the value of light of the Knoll Light value and set the value as a variable by using the channels time slider generated with the Audio into keyframes Deputy.

  The finnished expression would look like this:

  val = thisComp.layer("Audio Amplitude").effect("Both Channels")("Slider");
  linear(val, 1, 20, 20, 100)
  

  Who do you follow? Val is the value of the keyframes variable audio two channels slider. You cannot use the value for the variable because it is a reserved word.

• vector smart object in photoshop

  I swear im not a fool, but here I am with another problem...

  OK im with illustrator, but not good at all with photoshop.

  I'm illy card and you want to put in photoshop to add the final texture.

  It's the standard business card size, effect of mosaic type with type. not very complicated.

  I have copy and place it in photoshop as a smart object vector and it comes out pixelated beyond belief.

  I rechecked that anti-aliasing and AICB/PDF are checked on. If I save it as PNG file it seems to work, but that seems like an unnecessary step...

  I use Illy CS5 photoshop CS4, if that matters.

  any ideas?

  You can I think to score your own answer as the answer, so people will notice the thread.

• What is a simple but effective update to the XPS 8500 video card? (Computer complete Newb)

  What is a simple but effective update to the XPS 8500 video card? (Computer complete Newb)

  
  Hello Dell Community. I read through the sticky XPS compatibility and some discussions on upgrading video cards. However, I couldn't find something that fits my needs. If you all can help me with this, would be great!

  Characteristics of the computer:

  • Dell Xps 8500
  • Intel Core i7-3770 CPU @ 3.40 GHZ
  • 16 GB of Ram
  • 64-bit operating system
  • AMD Radeon HD 7570

  Needs:

  • Run newer games of 2014/2015 without lag on medium to high heat (GTA V)
  • Relatively easy to install (remove some screws and paste the video card in and voila!)
  • No need to upgrade the power supply

  Budget is $ 200-250:

  • Obviously the lower the better and if need be, the budget is flexible. Depends on if the gain is important for the payment of the sum.

  Look forward to your answers!

  Thank you

  Richard

  A card that I know works is $200 would be

  EVGA GeForce GTX 960 SuperSC ACX 2.0 + 2GB GDDR5 128 bit 02 G-P4-2966-KR that it comes with a 2 X 6 pin cable 8 pin Y so the stock power should be good.

  

  more than 2 GB will not improve the map and it will increase the price.

  http://www.Newegg.com/product/product.aspx?item=N82E16814487091

  http://www.Amazon.com/EVGA-GeForce-dual-link-graphics-02G-P4-2966-KR/DP/B00SC6HAS4

  Don't get me wrong although it won't make a video full screen 4K.

  To 3-way SLI GTX 980 and a power of 1500W power supply in an area 51 triad.

• graphics card does not support the Aero effects?

  Sapphire Radeon Vapor-X HD 7770 GHZ OC 1 GB
  DDR5 DVI-I/DVI-D/HDMI/DP PCI-Express graphics card

  1 x Dual - Link DVI, 1 x DVI Single-Link
  1 x HDMI (with 3D)
  1 x Display Port
  Display Port 1.2
  1100 MHz base clock
  5200 MHz Effective
  128-bit GDDR5 memory

  the SAPPHIRE HD 7770 Vapor-X OC Edition
  has 1 GB of more recent DDR5 memory,
  and is factory overclocked with clocks of 1100 MHz core
  and memory clocks 1300 MHz (5.2 GB/s into force) to deliver excellent performance
  Work or play with multiple monitors is becoming more and more popular.

  Windows experience index note my video card with a fat score 7.6

  and NOW windows 7 64 bit is tell me
  that my epic video card does not support the Aero effects?

  You owe joke... !!!

  Hello Dan,.

  Thanks for posting your query in Microsoft Community.

  I understand that you get the message that the aero effects are not supported by your video card. I would help you with the question. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. What is the edition of Windows 7 installed on your computer (Home Premium, professional, Ultimate etc.)?
  2. What is the brand and model number. your computer?
  3. What is the exact message you get?

  The question could arise if Windows 7 is not compatible with the version of the driver or if the driver you are using, in particular, does not supports the Aero effects.

  I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Run the next fixit and then re-run the assessment. Check if it is useful.

  Visual effects Aero Glass in Windows are not working or displayed

  If the problem persists, try the following method.

  Method 2:

  See the steps in the following Knowledge Base article and check if the question is reproduced.

  Guided Help: the problems of Aero in Windows 7

  In addition, I suggest you refer to the section: Aero material required in the following article and check if the problem persists.

  What is the Aero visual experience?

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Video card driver can't stand Aero effects

  Woke up this morning with my display in Windows Basic, rather than Aero. Tried to restart, then the Aero Troubleshooter and the result is that my graphics card Driver does not support the Aero effects. Even if she did yesterday. How can this be?

  P

  Click Start (or press the Windows key) and type Device Manager , and then on . Device Manager lists all the hardware in your computer.

  For your video card, click the triangle pointing to the right next to display maps. It should fall down and show the specific adapter that you have installed. Note that for future reference.

  Try the click with the right button on the specific adapter and selecting the Update driver Softwarer. In the new Update driver software window, click search for drivers that are updated automatically. The program will automatically search online for your specific driver. Install an update recommended found.

  If this fails to solve your problem, report back and we will consider other avenues.

  • Have you tried it turned off then on again?

• Dance of the Rotoscoping in After Effects with motion tracking?

  Hello!

  How can I copy the movements of real popular dance to a video into a cartoon character using rotoscoping/masking/motion tracking in AE?

  Example:

  Neytiri dance rotoscoping/animation at the beginning still very rough - YouTube

  Tracking and Rotoscoping in After Effects: dance-2014 Jayant Sharma - YouTube

  Thanks in advance!

  in the Express.ypH you have provided there is 2 things and none of them is the cartoon character who is drawn on a video:

  • * the first is a 3D CGI that mimics the movements of dances from the dancing and I think that this has been done from observation. certainly NOT the Rotoscoping.
  • * the second example is a dancing man - a video cutting cutting - perhaps he was dancing in front of a greenscreen, we do not know but is not a caricature but a cutting of a video which has been applied some effects to make it more graphic but still, it's a video and I think that one who was cut by using matte procedure (picture effect) after the dancer was shot in front of a green screen. the face attached to the dancer is a follow-up on the face and securing its position and rotation of the information from tracking data so it will match. This is called the track or the movement of the game and it is a skill that requires time and patience to learn. but it is sometimes easier than rotoscoping. the two can be combined together to make life easier for the ROTO. but it's advanced things.

  On rotoscoping as an Art to cut out an Image of a video (not picture on it):

  There are several ways to make rotoscoping (cutting of the motion picture), and they all need a lot of practice and patience. There is no way to do it easily and it is a skill that takes time to penetrate. different types of techniques are described here: https://www.fxguide.com/featured/the-art-of-roto-2011/

  draw on top of a video (without cutting) is animated rotoscoping and can be done in Photoshop. some do it with "Chronology of Animation Frame" and others with "timeline of the video.

  The main workflow is the following:

  1. you import your video in photoshop

  2. create a timeline of this video

  3. do frame-by-frame on top of the video

  4. export the sequence as a new video

  more on the process of these Roto technical animation can be found in this post.

  Re: rotoscoping techniques: Animation video vs Timeline -there are links and information in the post of different examples. the post is a work in the making. I tried to treat it as an article, but new to the Forum (in terms of contributing content) carried out, once a user posts a comment on my comment - I can't access (which makes sense)

• How can I me After Effects run out of my GPU if it's an AMD graphics card?

  I get the warning message about After Effects using the CPU rather than the GPU on start up. How can I include my AMD Radeon R9 200 series graphics cards supported?

  You can not. CUDA is a proprietary technology from nVidia. Not that it's important to good - unless you use the 3D Raytrace stuff, is always working normal and relevant OpenGL functions.

  Mylenium

• What is the best graphic card for after effect

  Hello
  my graphics card is not supported for after effect. I'll buy a new one and I would like to know what is the best
  Thank you

  There is never a simple answer for such a question, but:
  List of cards supported for 3D Ray Tracing in AE, you will find it here: after effects configuration required for Mac OS and Windows

  More information on NVidia: Adobe after effects CC - 3D Graphics workflow | NVIDIA

  But to be honest, most of the nvidia graphics cards will work with AE - ELA easier - more Cuda cores better.
  But before you spend a lot of money for the high GPU know AE uses mainly from CPU to GPU rendering is not so important. It uses the GPU only for RayTracing (obsolete)

  and some third-party plug-ins.