Card Flip in AS2? TweenLite? Help, please

Similar Questions

• Help with card parent part number. Help, please

  I have a hp laptop dv9000 series. I removed my motherboard so I can replace it, but there is just no part number on it and hp only used several mobos for this series. My laptop is dv9628-nr... the serial number [text removed for privacy] P # is GS720UA #ABA... .i called hp, they me transferred to India and they said they can't tell me the number of mobo unless I have buy a warranty, so they obviously care nothing about the customer service... all help greatly appreciated.

  All HP replacement part numbers ending in-001, replacement part number is normally placed by the accessible memory slot to end-user on the bottom of the laptop.  In my view, that it's your machine:

  http://h10032.www1.HP.com/CTG/manual/c01311536.PDF

  I looked at the maps system, there are 5 part numbers, but if you live in Germany, which gets rid of two, if it's not an AMD processor that gets rid of one, now you just need to know the size of the video RAM 256 or 512 and you have narrowed it down.  Hope this helps, if that's the case, kindly give me a few congratulations!

• I bought a gift card a while and now I don't have the balance for her and when I try to buy I can not because I already bought it. Help, please

  I bought a gift card a while and now I don't have the balance for her and when I try to buy I can not because I already bought it. Help, please. If I can't do my 15 birthday money are wasted. He said as I already had a gift card in my account, but somehow everything is over now when I was not yet buy anything!

  A gift card is redeemable only once, it is useless to try to buy it back again.

  To see what, if any, balance you have left on the account you share you: see your credit balance - Apple Support iTunes

  To see what you bought on the account and therefore potentially used some/all of it: see your purchase history in iTunes on Mac or PC - Apple Support store

• I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.

• The Knights of iron game item pack I bought 4 days ago. my credit card payment was made. but I got my package to arrive. Help, please.

  The Knights of iron game item pack I bought 4 days ago. my credit card payment was made. but I got my package to arrive. Help, please.

  Do you mean that you have not received the item ("received my package" implies that you have, in this case I don't know what your question)? If you do then you contacted the developer of this game? If they cannot / does not help, then try to contact iTunes Support: http://reportaproblem.apple.com

  (I asked for your message to be moved to the forum of the iTunes Store, where you have posted is for questions about the iTunes U app.)

• I need help updating my graphics card! Help, please!

  Hello, I need help. I have the HP ENVY 700-214, I absolutely love it.

  If there was one thing I could change, however, it would be the graphics card. Which brings me to my question.

  What is the best graphic card compatible with desktop HP ENVY 700-214? I've got DirectX 11 and Intel HD graphics card. I want to get a GeForce graphics card, but I don't want to spend my money on evil. Help, please.

  JayrollsJay, welcome to the forum.

  Here is a small but powerful video card that should work on your computer.  It requires only a 300W power supply (PSU) with no extra power connector.  Read the reviews to see what users have to say about it.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• I just got my 14 mailed items.  I have NO card or anything else.  I can't install it following the instructions online. I have no codes or numbers except the bar code.   Help, please.

  I just got my 14 mailed items.  I have NO card or anything else.  I can't install it following the instructions online. I have no codes or numbers except the bar code.   Help, please.

  Hello

  You can search the Redemption Code that would be a 24 digit alphanumeric code, you may have received or will need to get to the place where you buy first or Photoshop elements 14 and can access the following link to get the instructions to use the code to get the series license key to activate the product.

  Redemption code help

  If you're still having problems getting the series license key, you can contact Adobe customer service to get the license key of series.

  Contact the customer service

  You can also access the following link to download installers for first 14 elements or Photoshop elements 14 accordingly.

  Download Adobe Premiere Elements 14, 10, 11, 12, 13

  Download Photoshop Elements | 10, 12, 14, 11, 13

  Thank you.

• After inserting a mock-up (LOGO PNG) in my shine card it becomes transparent, only vague lines are visible. Help, please!

  Im working on a film for the introduction of logo in After effects. Unfortunetely when I insert my composition (PNG or JPEG) in my card smash it becomes transparent. This is why the logo can not be seen. Only vague lines can be seen. Is that a graphics card problem or can it be resolved?

  
  Help, please!

  Thank you very much for the quick responses. I found the problem myself. I did not put my opinion shatter on "renders"!

• Why am I being charged every month on my credit card, but im not getting no not my app services! and because the system does not show me as a premium member I can't contact anyone for my refunds or changes! Help, please!

  Why am I being charged every month on my credit card, but im not getting no not my app services! and because the system does not show me as a premium member I can't contact anyone for my refunds or changes! Help, please!

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• HELP PLEASE WITH MY WIRELESS NETWORK CARD CONSTANTLY HAVE TO BE SET

  I have an Acer Aspire 5552-3691 with Atheros AR5B97 wireless adapter. It shows that I have an internet connection, but I have to constantly run network diagnostics it resets then the wireless network adapter and which solves the problem. However, the fix is only short it can last 2 minutes or if I'm lucky 15 but nevertheless it continues to occur. Help, please

  Hello

  Thanks for posting your question in the Microsoft Community forum.

  Refer to this article and let us know the status.

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  Thank you.

• I updated my iPad today and now I can't get cellular internet. Can anyone help please?

  I updated my iPad today and now I can't get cellular internet. Can anyone help please?

  It is a bug in 9.3 and persists in the 9.3.1

  to get back to be

  1. turn off the power, remove the sim card, reverse and insert sim card when asked. Or

  2 disable cellular data, mode airplane and then turn off. Wait about 30 seconds and then turn it on turn off the airplane mode and then turn on the cellular data. He must find it.

  but this is only a work around.  If you turn off again, you will have the same problem and her you need to repeat the steps above.

  Good luck

• Hey, I don't see my friends on Apple Watch contact? help please.

  Hey, I don't see my friends on Apple Watch contact? help please.

  on the digital touch and should add the address of my friend

  HI - try the following steps.

  After the Association Apple Watch with an iPhone, you may have to wait an hour or more before you can receive a digital key.

  Otherwise, this checklist is intended to address potential problems, which can also help to solve or to avoid other problems.

  • In the Contacts application on your iPhone:
    • Make sure the contact of each friend card contains their iPhone phone number and email address Apple ID.
    • Check that your contact card contains your Apple ID email address and your iPhone number.
  • On your iPhone, go to: settings > Mail, Contacts, calendar > in the Contacts section, check my Info using your contact card.
  • On your iPhone, go to: settings > general > Siri > My Info - make sure your contact card is selected.
  • Check that you have added each of your friends to the friends list on your Apple Watch:
    • On your iPhone, in the application of the Watch: Watch My > friends.
    • To add more friends: friends list > add friend > tap someone in the contacts list.
    • If someone is not in the list, open the Contacts on your iPhone, add them here, and then try again.
  • Remove the old iMessage conversations with each of your friends on your iPhone and Apple Watch:
    • iPhone: app Messages > swipe to the left on a message thread > delete.
    • View: Open the Messages app (from the home screen, which is accessible by pressing the digital Crown) > swipe to the left on a message thread > tap on Trash / delete.
  • Set new conversations of Messages from your iPhone phone number:
    • iPhone: settings > Messages > Send and receive > scroll to start new Conversations of > choose your iPhone phone number.
  • Check the email addresses to which you can be reached via iMessage:
    • iPhone: settings > Messages > Send and receive > under you are reachable by iMessage to > allow email address Apple ID (with a scale) (do not enable others who are not only yours).
  • On your iPhone in the app Watch: Watch My > general > reset > press reset sync data:
    • You won't see anything happen after pressing it (the process runs in the background, invisible to the user).
    • Wait a minute or so (to allow contacts to be erased and replaced on your watch).
  • Disable and re-enable iMessage on your iPhone:
    • iPhone > settings > iMessage > enable/disable / enable again.
  • Restart your iPhone and your watch (turn the two together off the coast, then restart your iPhone first):
    • To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off. To restart: press and hold the side button until you see the logo.

  Also ask your friends to follow equivalent process.

  More information:

  Use the touch-Apple Support

• HELP Please: can't find missing drivers on the HP website

  My computer is missing 4 drivers (network controller, Ethernet, PCI device and SM bus controller controller), including the first two (I presume?) stop to connect to Internet.
  I downloaded what looked like the appropriate drivers for the ethernet controller network off-site Internet HP on another computer and transfer files with a USB key.
  Then I opened the files and everything seemed to go well - installation wizard arrives, I accept the user agreement, it seems to start updating - when he suddenly stops and a notification will appear that says "your system does not meet the minimum requirements for this update. Update has been canceled. (9996).
  
  I would like first of all to understand what are the requirements may not be satisfied with my computer, and then how to find exactly the right drivers necessary to connect to the Internet.
  
  I'm running a new (although not the latest version) copy of win7 and have a new hard drive which I assume is at fault for missing drivers. It is a g6 - 1232ea portable Pavilion.
  
  Help, please. See you soon.

  You are the very welcome.

  Yes, you can download on another PC.  Just download and copy on a USB or burn it to a DVD.

  Here is the link for the driver for the wireless card.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-105197-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5197301 & sw_lang=.

• HP PROBOOK 4530 s: I need help please!

  I need assistance with my base system device driver!

  Lds material

  PCI\VEN_197B & DEV_2394 & SUBSYS_00000000 & REV_30
  PCI\VEN_197B & DEV_2394 & SUBSYS_00000000
  PCI\VEN_197B & DEV_2394 & REV_30
  PCI\VEN_197B & DEV_2394
  PCI\VEN_197B & DEV_2394 & CC_088000
  PCI\VEN_197B & DEV_2394 & CC_0880

  Help, please!

  Hello

  Install the driver from the following link card reader.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881 & swItemId = ob_116003_1 & swEnvOid = 4058

  Kind regards

  DP - K

• Card mother compatible ECS MCP73VT-PM please. I need a motherboard that can hold in HP IMEDIA X 2414

  Boots of my HP DESKTOP IMEDIA X 2414 (bought from PC World UK 2.5 years) is no longer.
  TECHNICAL DATA:
  MATERIAL:
  IMEDIA X 2414
  Intel Core 2 QUAD processor Q6600
  3 GB DDR2 #320 GB 7200 RPM SATA HARDISK
  NVIDIA: GEFORCE 7050 up to 1407 MB
  P/N: PB80128501
  [Personal information]
  PROBLEM: Switch on computer and you get NO SIGNAL on monitor LCD ACER.
  MY STEP BY STEP TOUBLESHOOTING:
  1 Unlpug monitor and a card on my laptop (very good for my laptop boots) so WATCH not IS NOT THE PROBLEM.
  2 replace MY power supply with a new power supply, no change (IE NO SIGNAL appears ON the screen LCD ACER), PSU (Power Supply Unit) is not the problem.
  3. REMOVE 2 DDR2 RAM cards, switch on the desk, and I get a continuous beep. Apparently
  This suggests that the motherboard (ECS MCP73VT-PM) is good.
  4 reinstall the 2 DRR2 RAM cards, insert a new external graphics card, unplug the monitor from
  Graphic INTEGRATED card and plug it into an external graphics card, turn on the computer, result: ALWAYS
  NO SIGNAL on the monitor, so graphics card isn't necessarily the problem.
  5. extract the whole motherboard of the computer case, use my magniflying glass to inspect
  all the capacitors. No capacitor doesn't show any corrosion to their background, no bump on top, without leakage
  any where. Then I remove the (intel Core 2 QUAD processor Q6600) processor, check it carefully.
  no leakage.
  (6 reinsert the processor, turn on the computer, yet I get NO SIGNAL ON monitor)
  
  Question: What is my problem
  Answer: My motherboard is faulty and I can't find the fault.
  Now, I want to replace the motherboard together and then to reuse my 2 DDR2 RAM and processor cards
  on a motherboard which must be geometrically compatible with ECS MCP73VT-PM motherboard.
  Could you tell me what kind of mother I have to buy. I am absolutely sure that my 2 DDR2 RAM cards are still usable because I tested them on another computer that can boot up. I do not know
  on the processor, because I was not able to test it on another machine.
  Help, please. MY new motherborad should be able to adapt in the case and has compatible
  audio.

  It is a HP support forum.

  I recommend that you give Packard Bell support a trial.