card HP problem h8-1414 factory restore/chart.

Similar Questions

• Problems with the factory restore

  Hello
  I just burned it rcovery DVD and booted up the laptop in the splash screen I pressed dvd lenovo care button 1 was in the drive. the laptop then went to the recovery, but said plese insert disk 1 and press ok, so I pressed ok but he asked me again for disk 1, I just burn the DVD so I know not its disc 1. Anyone know what I need to do? PS please try to keep the easy language like im not as computer thanks.

  
  

• Dell Inspiron laptop, Windows Vista Factory restore problems :(

  Hi, I'm a poster first. My computer knowledge is empowered moderate, so please cut me some slack! I hope someone can help me, I would be very happy.

  I have a Dell Inspiron laptop computer and the operating system Windows Vista 32. I recently tried a factory restore. I wish that I would have looked at this site before I tried.

  I finished the factory restore, but I think that I made a mistake. I have saved all the files except my music files, because I didn't think anything was important. I'm stoopied. Now, when I try to use my computer is a few things wrong with it.

  1 there is no way to connect to or even to recognize a wireless network. I have one in my house who previously worked a lot with my computer. When I use windows to diagnose the problem: "this computer has an adapter installed and configured wireless device." If I click on the button that says "install wireless networking equipment and verify that the correct drivers are loaded. Up is a window "Solve driver problems" which is almost useless.

  2. when I try to run a program, for example already installed windows Mah Jong Titans, on the computer I get this message: "exceleration material is either disabled or not supported by your video card driver, which could slow down the performance of the game. Good so my video card is not well configured. Now that I look, the resolution looks really different than before. Kind of a blur. I use my computer to run the music production software so I don't know that this is going to work.

  3. I have the DVD of re-installation of the operating system. I also have the CD of resources that contains all of the drivers (or other.) I can't load the drivers, or even knowing which ones I should install.

  I guess that I just want to know what I do to recover my computer at 100%. I hope that my problem is not too broad or too specific, but I hope some feeling there out a pain and can help out me.

  THANKS IN ADVANCE

  -nick

  OK, the factory restore (takes 10 minutes) is less work because everything is done and you do not have to load drivers or utilities. In any case, it is easy to do and you have all that on the drivers and utilities CD. There might be a few steps on the CD, but you can download Dell. Once you have reinstalled Windows back post and I'll tell you the order in which to load your drivers. To do this: equip your Windows DVD. Everything that comes close to her. Restart the computer. As soon as you see the Logo Dell press F12. You will see the start page. Select your drive (should already be highlighted) and press ENTER. Press a key, install now, accept licenses, instructions are not always the same for each computer, depends on your configuration. Take your time, follow the instructions carefully. You must delete all data from your hard drive (C :) and the NTFS file system format. Also delete (D :), it's where is the factory restore.) You can post back if you arrive at a page (just stop there and wait for my reply) you don't understand.

• Satellite A660 Factory Restore problems

  I have a Satellite A660 Ref. PSAW3A-14V062 delivered pre-installed with Win 7 not provided, but a hidden partition with disk recovery files.

  Decided to do a restore to factory from scratch but ends of disk errors. Removed the HD and connected to another computer.

  Using Acronis Disk Director, I copied the hidden partition (HDDRECOVERY) to another drive and then formatted the drive and copied the partition hidden in it and reinstalled to the laptop.
  Downloaded an ISO image and tried to install it from DVD but received the message that windows cannot be installed on the HARD disk that the drive is about to fail.

  Bought new HARD drive and copied the partition hidden for her.
  I then tried to install from the DVD, but kept getting errors about unable to find files, after ISO more several downloads and burn 5 different DVD the furthest I got was the screen where it is "files", this remains at 0% and nothing else.

  I then tried a factory restore using the "hold 0 during startup", but when I took out the key pressed 0 when the Toshiba start screen showed that nothing happened.

  There was a small Partition 'System' on the original HARD drive I have has not copied. I have a few questions.

  (1) the "System" partition did not the files needed to start the factory restore and if so is there anywhere I can download these files?

  (2) probably a topic for another thread, but no clue as to why I have so many problems with ISO files.

  Cheers and sorry for the long-winded explanation.

  The installation of any recovery is quite complicated. It is designed to avoid a kind of manipulation so original recovery image can be installed either using recovery DVDs or HARD disk recovery facility which must be created with Toshiba recovery disc creator tool.

  To be honest, the whole story is complicated enough, but what confuses me, is
  > Decided to do a restore to factory from scratch but ends of disk errors
  If I understand you right, you have created a drive recovery, right? What exactly happens?
  You can use this drive with new HARD drive?

  This method with files recovery to cope with the new HARD drive does not work. You will not be able to access and begin HARD recovery disk image installation.

  If you have a new HDD only how to install the original Toshiba recovery image is to use the recovery DVD disc.

• Problems with the 64-bit on Pavilion a6620f Vista Factory restore

  I had a hard drive failure and restoration on a new hard drive. The original HD is a 500 GB Seagate Barracuda 7200.11 model ST 3500620AS. The new HD is a 500 GB Seagate Barracuda 7200 model ST 3500641AS - RK. I bought a set of restore for this HP computer disks.

  First problem was that disk 1 does not start from the internal CD/DVD drive. My Seagate drive boots fine on the same drive! I used an external USB CD/DVD drive and restore disks worked well on that. I went through the process of factory restore and in the end, I get an error message "installing Windows could not configure Windows to run on this computer hardware." I tried to change the BIOS setting from ACHI and IDE to SATA RAID with no luck. I tried to unplug the USB CD drive before the first reboot. That no longer works.  I unplugged the internal CD drive and tried different combinations with no luck. Need help I have run out of things to try! Does anyone have any ideas/thoughts?

  Hello:

  I don't know how you can get your recovery discs to work.

  Looks like you have tried everything.

  I had problems with mine too and got the same error on a HP Elite 8200 desktop computer business

  It was the first time I've ever had a problem with recovery disks.  It's very frustrating.

  I have a workaround if all goes well, you can use to get Vista on your PC...

  If you can read your 25-character product key MS, you can make your own Windows Vista installation disc. You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them (just before going forward with the actual facility) and they seem to work perfectly.

  Apparently, when you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-VI...

  After you have successfully installed vista, you can download the drivers you need your PC support and driver page.

  Paul

• Factory restore problem

  I had a problem of partition, that I am not well read this but I used to be able to do a factory restore. In fact, I did one around 2010 and after that Feuary not go. I can't create a set of factory retore because vista says I did.  It will not read the game I did when I first set up the computer. It seems good not it won't load no scratches. any help would be great microsoft will not respond with a direct answer they continue around and never come to the point of this question. I need a restore I am flying blind with this inability to restore is not cool at all. Thank you

  Hello Pushedincorners,

  Thank you for your message.  Unfortunately, you will need to contact your system manufacturer for instructions to correctly restore your computer to the factory settings.  This process is different from system to system manufacturer manufacturer and each has their own way of doing things.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• XPS M1530 Factory Restore problem

  Hello

  I have installed Windows Vista, but finally, I want to restore my computer with the Dell factory restore.

  I press F8 at startup, but is no longer the "Repair my computer" option...

  How to restore my M1530 with the recovery partition?

  
  

• cancel a factory restore

  Anyone know how to cancel a factory restore, so I can get back my old files and save them

  You can not cancel a factory restore.

  If you have an installation clean back to factory settings, you normally wiped your hard drive clean during the process.

  You can try this program:

  http://www.SnapFiles.com/get/Recuva.html

  Recuva is a file undeletion tool that allows you to analyze your hard drives or media cards for files that have been deleted or formatted. It presents you a list of files that have been found, as well as an assessment of their potential for recovery, a preview option, and a hex viewer to inspect the content. You can limit your search to files of a certain type (e.g. images, audio etc.) and choose between a quick and a thorough analysis approach. The program also includes a secure deletion option that allows you to permanently delete files that were found while parsing, to avoid any future recoveries.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Find a windows.old folder, because we do not know exactly how it reinstalled.

  http://support.Microsoft.com/kb/933209

  How to recover files from an earlier version of Windows in Windows Vista

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If none of the above solves your problem, try data recovery companies.

  Be warned: they are $$$

  See you soon.

  Mick Murphy - Microsoft partner

• Factory restore

  I recently inherited a MacBook Pro. It runs on Mac OS X Version 10.6.4 Intel Core 17. In my view, that it was made in 2010.

  It will not update the operating system. Otherwise, it works great. I was told to hold the r/control/power button will restore the system, but it did not work. I believe that the factory restore will solve the problem of update, but I don't know how to do this.

  Before purchasing a used computer, you must have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.

  The first thing to do after the acquisition of the computer is to wipe the internal drive and install a new copy of Mac OS X. You - not the original owner, must do. Changes made by Apple over the years have made this very complex seemingly simple task.

  How would you do it depends on the model, and if you already have another Mac. If you are not sure of the model, enter the serial number on this page. Then, find the model on this page to see which version of the OS was initially installed.

  It is dangerous and may be illegal to use a computer with software installed by a previous owner.

  1. If you do not have another Mac

  a. If the machine comes with OS X 10.4 or 10.5, you need a Snow Leopard install disc (OS X 10.6) retail boxed and "Shrink Wrap" on the Apple Store or a reputable dealer - no eBay or something of the sort. If the machine is very old and has less than 1 GB of memory, you need to add in order to install 10.6. Preferably, install as much memory can take, according to the technical specifications.

  (b) if the machine comes with OS X 10.6, you need the installation media that accompanies it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media of the original owner, but if you do not, order replacements from Apple. A disc at retail, or the gray discs of another model, will not work.

  To start from an optical disc or a flash drive, insert it, and then restart the computer and hold the C key to start ringing. Release the button when you see the gray Apple logo on the screen.

  c. If the machine comes with OS X 10.7 or later version, you don't need media. It should start in the mode of Recovery of the Internet when you hold down the key combination option-command-R to start ringing. Release the keys when you see a spinning globe. Note that Mac Pro models turn over end of 2014 (with the box of "cheese grater") cannot use Internet recovery, regardless of what version of OS they shipped with. The Mac Pro round (2014 or later) can use it.

  d. some models 2010-2011 comes with OS X 10.6 and received a firmware update after 10.7 was released, allowing them to use Internet recovery. If you have one of these models, you cannot reinstall 10.6 even from the original media, and recovery of the Internet won't work either without Apple ID of the original owner, in this case, contact Apple technical supportor take the machine to an Apple Retail Store or other authorized service provider to have an operating system installed.

  2. If you do not have another Mac

  If you already have another Mac which has been upgraded in the App Store to the version of Mac OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use the recovery disk wizard to prepare a USB device, and then starts the new Mac of it by pressing the C key to start ringing. Alternatively, if you have a backup of OS X Time Machine 10.7.3 or later on an external hard drive (not a time Capsule or other network device), you can start by holding down the option key and clicking in the row of icons that is displayed. Note that if your other Mac has never updated in the App Store, you can not use this method.

  3 partition and install OS X

  a: If you see a lock screen trying to boot from the support installation or recovery mode, then a firmware password has been defined by the previous owner, or the machine was locked remotely via iCloud. You will need to either contact the owner or by the machine to an Apple Retail Store or other provider of service to be unlocked. May asked you proof of ownership.

  b. launch disk utility, and then select the internal drive icon - no volume icons nested beneath it. In the Partition tab, select the default options: a partition table GUID with the volume of data in Mac OS extended (journaled) format. This permanently deletes all existing data on the disk.

  c. an unusual problem can occur if all the following conditions apply:

  OS X 10.7 or later version has been installed by the previous owner

  The boot volume has been encrypted with FileVault

  You start in recovery mode (that is, not of a 10.6 disk installation)

  In this case, you will not be able to unlock the volume or partition the drive without the FileVault password. Ask for advice or see this discussion of the CSA.

  d. after partitioning, quit disk utility and run the OS X Installer. If you install a version of OS X was acquired from the App Store, you will need the Apple ID and password you used. When the installation is complete, the system reboots automatically in the Migration Wizard, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have all the data to be transferred, it is usually the best time to do it.

  e. run the software update and install all available Apple system updates. To upgrade to a major version of Mac OS X newer than 10.6, get it from the Mac App Store. Note that you can not keep an improved version that was installed by the first owner. He or she cannot legally transfer to you, and without the Apple ID, you will be able to update in a software update or reinstall, if it becomes necessary. Is the same for all App Store products that the previous owner installed, you will need to buy.

  4. other issues

  a. If the original owner "accepted" bundled iLife (iPhoto, iMovie and Garage Band) applications in the App Store so that he or she could put up-to-date, IRREVOCABLY linked to that Apple ID and you can download them without having to buy them. Reportedly, the Mac App Store Customer Service sometimes issued codes of reimbursement for these applications to second owners who asked.

  (b) if the previous owner has not Deauthorize the computer in the iTunes Store under his Apple ID, you will not be able to authorize immediately under your username. In this case, you will have either to wait up to 90 days or contact iTunes Support.

  c. When you try to create a new iCloud account, you could get a failure message: "Account limit reached." Apple imposes a limit of life of three configurations by device iCloud account. Erasure of the unit does not reset the limit. You can always use iCloud account that was created on another device, but you will not be able to create a new. Contact iCloud Support for more information. Configuration limit does not apply to the Apple ID accounts used for other services, such as iTunes and Mac App Store or iMessage. You can create as many accounts you want.

• Tecra M5 - SD card reader works with the factory settings

  Hi all
  My SD card reader has been in place. It will read a few cards of 4 GB and won't read other (usually newer).
  All cards in this problem area are Transcend cards 4GB SD (HC or whatever the format more later is)
  The cards, the M5 will not read can be read both my PDA, but also an old Tecra 9000 (who will also tell the other 4 GB cards)

  The PC was recently engineers have a problem so I asked to look at this problem. They reported that it was a software problem, because if they load the recovery CD (that is, to bring the machine to factory State) the SD card reader reads cards problem OK; Back to my setup and the SD card reader can not read cards SD - error message is "the request cannot be performed because of an i/o device error."

  So I guess that I need new drivers. Very well except that it has no drivers for the drive SD card itself. Its a part of the motherboard. There is a 'secure module SD' on the download from Toshiba site and I downloaded and installed the SD Secure module (dated 2008)
  However, Device Manager still shows that the SD host controller driver is Microsoft version 01/10/2002 6.0.4069.5

  If anyone has ideas on how to fix

  TFA
  R

  Hello!

  > back to my setup and the SD card reader will not read SD cards
  Can you explain what you mean, please?

  I put t understand why you n t run factory if it s a software problem. I never had problems with the factory settings because then I can make you that all functions work properly on my laptop.

  Good bye

• For Satellite C660 factory restore

  I installed windows 7 pro on my laptop which made my longer laptop for start and stop time down and little slow. now I just want to go back to the factory restore, how can I do this. the pre-installed recovery partition is not show in "my computer".

  Thank you very much

  You cannot start after installation of operating system HARD drive recovery clean facility more.
  You can do this via recovery DVD only.

  Did you create this disc by following the advice of Toshibas rappelling recovery or document s user manual?

  If you have this drive please use it for recovery image installation. If you n t have it you have a big problem today.

• K1 "unrecoverable error bootloader (0 x 19000008) after the factory restore".

  Having some problems with my K1 for a while & finally decided to do a factory restore and start over. Fact the factory restore (exactly like I had to with my android phone a couple of weeks) & now he jumped to the top with

  «Erase Userdata...»

  Boot loader fatal error (0 x 19000008)

  He sat there for a while. I tried to hold the power button, but nothing. This tablet has been updated to the latest version, it has not rooted or anything else. Just completely factory & updated. The problems I had when I decided to restore it was running mostly just super slow. Took forever to get the apps to arrive on the screen & such things. Thought I just having too much junk previously installed on it, so I tried to restore it & start over. Bad idea! Any idea? My 2 weeks im slammed all day every day & cant slow to call assistance & wait always hold to try & fix it (assuming that they can even repair). Would be delighted to hear that its an easy fix but I'm sure used to be the case. I bought it back in November 2011, so its only 6 months old.

  Hi Javahead

  How many times have you tried to restart since this error?

  Recently, I did the same thing after that my front cam went wrong. I got the same error. But after a few reboots and maybe wait a few minutes before trying again. Finally, he went through the process and completed successfully.

• Satellite A500 - factory restore

  Hiya

  I was wondering if someone can help me.

  I had no end of problems with my laptop with one thing and another, and for these last months, I had a problem with my windows install. I can not install, download or update anything because it says that there is an error with the installation program. I tried various things to try and fix this, but think that the only thing for me to do now is to do a factory restore.

  The problem is its asking me a password that I don't have. Is there a way to get around this?

  Thank you very much

  PS - or maybe someone can suggest a way to fix the installer: o)

  If you use the Windows login password, use the same. If not, put your account without password name and click Next.

• Unable to sign on my MOTOBLUR account after the factory restore

  After seeing that I wasn't getting updated and no could not remove all the accounts on my CLIQ, I did a factory restore and tried to sign in with my existing MOTOBLUR account. An error message pops up saying that the session has expired or the password is incorrect.

  The password cannot be wrong, because I can access my account online. The message appears whenever I'm trying to connect. I use only a wifi connection.
  What should I do?

  To sign in blur, you will need to use 3G or wifi. You said you use wifi, make sure that the wifi icon is on the notification bar. If this is not the case, press menu and you can set it here when you register in blur of installation. If you still can not sign trying to join a 3G area, and then try again. The time-out error is saying that you don't send fast enough information on the server of blur. Password error appears but is not always the problem. If you arrive at sign always used the password and then follow the instructions to reset, then try again. Make sure that you use an e-mail address that you will be able to receive mail from.

• HP Pavilion a705w desktop xp - how to do a factory restore?

  Restore the default settings without a disk.

  Hello

  (1) is there a recovery on the computer partition?

  (2) is the Windows XP operating system is installed on your system?

  You can perform a factory restore using the recovery partition.

  Restore your computer: http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01874595&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=435558#n67

  Troubleshooting problems in Windows XP system recovery:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07144&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=435558#N71

  HP and Compaq Desktop PC: looking for recovery disks?

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07143&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=435558

  If you do not have windows XP CD, then I suggest you to contact HP and order for a recovery disc.