HP Pavilion a705w desktop xp - how to do a factory restore?

Similar Questions

• HP 2350eo p6: I can't understand how successfully do a factory restore on my win 8-> computer 8.1

  I tried to do a factory restore, and it just doesn't work. I can't start to the top of the recovery screen.
  I tried restarting and pressing F11. Because Windows is not normally start, he's clearly trying to do what I want it to, but it does not work. I tried once to leave it for an hour and everything I've seen on a black screen. I also tried to boot via the Recovery Manager. I tried to create a USB stick recovery. First of all, I created the USB through recovery manager. Then I rebooted and held of the ESC. Then, I started the USB key. Nothing happened.

  When I turned off the computer and started it again, as long as I don't push any button, windows would start as normal, up to this point.

  Given that HP tools could not solve the problem, I tried to restore through the windows, the standard method, I suppose, by selecting Properties on the right sidebar. Computer properties, then update/restore, restore, remove and install windows. When I tried, the computer restarted and I got a black screen again, but now, I can not even start Windows more. He answers when I press ESC while booting, but I can not to initiate anything.

  I just wanted to make a simple factory restore and now my computer is dead. Where should I go from here?

  My computer is a HP Pavilion 2350eo with Windows 8.1 p6, it was packed with 8 victory, but a few months after asking me about upgrading a few times, somehow forced the update windows update. My hard drive is almost full at the time, so I don't know if my problem is related to a bad 8.1 Win install. It seems very pulled by the hair.

  I was able to understand.

  I pressed ESC while booting. So, rather than starting the real usb, I chose run Application Uefi, and then I was able to browse the actual usb (which I did before) and select an individual file to run. I do not know which file I got, but I was able to run one of the files, that triggered the factory reset.

  So my problem seems similar to when you enter a CD in windows, and it's not autorun.

• How to perform a factory restore?

  original title: PA bear... because I do not have a vista disk figured out how destructive aka recovery... do I have to re - buy a copy of vista 32? ty4yh tootsnw

  everything I've read claims a disc to use... my system came with one.  where can I find the hidden recovery partion?

  everything I've read claims a disc to use... my system came with one.  where can I find the hidden recovery partion?

  Hey tootsnw

  by a destructive restore by one of the methods below, you can reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  If she did not come with a disc you should have a recovery partition as the computer manufacturer should provide a means to reinstall vista

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  Walter, the time zone traveller

• How to do a factory restore a Scanjet 7000?

  I installed a new system for the user and installed the 3.6.1 for the Scanjet 7000 scanner software.  While I can get accounting software to work with the scanner very well, I can't function buttons.  When the button is pressed it comes up with a box indicating the buttons need to have profiles assigned to them. However I can't scan tool displays a red circle with an X white in it as well as along the coast all profiles.  The user is configured as admin.

  edited to clean up the horrible = engrish)

  Got, it works.  First, turn off the scanner. I had to remove all software updated, restart, run ccleaner and install the version 2.7 of the software.  What's interesting is that, during installation, he said he had to replace some read only files that were left by the version of the software 3.6.1.  Now, this should not happen for two reasons, firstly the files should not have been read-only and then they would have to be eliminated during the uninstallation of 3.6.1 has been executed.  I would speculate that because the files have been set to read only this was the reason why I could not do anything with the button on the scanner profiles.

  Scanning HP 3.6.1 tools clearly has several bugs in there and should be removed from the downloads and a version fixed, conditioned or an older version of work.

• How faster (HP Pavilion a6130a desktop PC).

  Hi all

  I got (HP Pavilion a6130a desktop PC) and please advise me on the ways to upgrade from my office to speed up.

  Here is the link for my product...

  http://support.HP.com/us-en/document/c01109618

  Thanks to all who could help me with this problem. I highly appreciated.

  Thanks for your help Big_Dave.

  I'll look into the PC that you recommend...

• A new graphics card for HP Pavilion a6057c desktop PC

  Hello
  I was wondering if I can get recommendations for a game for my HP Pavilion a6057c desktop PC graphics card.

  Hello

  A video card decent for the games will require a bigger power supply in your PC.  Go with a level of high level video wouldn't do justice to your PC based on its current level of performance of the components.

  TheCorsair CX 500is on sale for $45 after rebate.

  This GTX 460 768 MBis on sale for $95 after rebate.  This GTX 550 TI 1 GB$129 after rebate.  The adjacent slot on the slot PCI-E x 16 in your PC must be vacant.  Review thePresentation of the motherboardof your PC.  Are both video cards NVIDIA 8.25 "long so do some measurement inside your PC to be sure that the video card will fit.

  Review the specifications of performance ATI and NVIDIA . Look at the specifications of strip memory bandwidth and level of DirectX support.

  How to replace a power supply.

  How to replace a video card.

  Shop around and know what the return policy is before you buy.

• Pavilion p6787 c - b, how to configure both monitors?

  Hi, I have the flag c - b p6787 PC Bundle w / double HP 2311 monitors x. I was wondering how to set up two monitors exactly how the manual says?

  I have lost the manual and need two monitors again but can't find a way to do it. Thank you!

  Here are the specifications of your HP Pavilion p6787c desktop computer and two x monitors HP Pavilion 2311. I have the same computer and the monitor bundle. The AMD Radeon HD 6450 computer graphic card has HDMI and DVI - I outputs. You want to connect a monitor with a HDMI cable and the other with a cable DVI. These cables should be included with the purchase.

• No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home

  No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home. Any suggestions on how to solve the problem?

  Thank you. This site help me solve my problem.

  http://www.Realtek.com.tw/downloads/ExpressFTPSite.aspx?DownTypeID=3 & DownID = 558 & PFid = 23 & Conn = 3

• Noisy fan (HP Pavilion A1629UK1 Desktop)

  I have a HP Pavilion A1629UK1 desktop computer. When I load windows the cpu is quiet until I open programs, then the (loud) fan turns on and does not turn off. Suggestions for me what to do - should I replace the fan and what should replace it with, and how do I do? Thank you Maxence.

  Open the computer case and clean any dust that could build up inside the case and the heatsink / fan assembled. Please post here again, if this help does not solve your problem.

• Pavilion P6610f Desktop Tower a ticking noise, can turn back be opened while still running?

  HP Pavilion p6610f desktop win 8 64 bit since my hard drive has failed and a friend of a friend installed another hard drive and insisted on the fact that I install Win 8 instead of 7, (I hate Win 8), there is a click inside the tower and I also hear something that seems to hold the bike to the top then then down every few seconds, the ticking is almost every second. I checked the power that I knew how. Configuration and System Device Manager and it says disk hard does not work properly and is no need for an updated driver. But everything is so slow and things don't work a lot of the time, the internet will not load or merely far sometimes but convenience store network says it is connected and functional. I sometimes can't features to not work the control panel.  I tried the diagnosis of memory in the administration settings, but it wouldn't work. Before I could get my Win 7 backup files on Win 8, PC showed that I had 220 GB of 232 GB memory left possible on the replacement hard drive. I have 4 GB of Ram on a 16 possible and I thought shoud get more. I was just wondering can I have the back off the coast of the Tower during its execution so that I can see that actually the sounds before investing in another hard drive and memory cards? I'm so unhappy with my computer that I love even more to use it and I used to stay on 10 to 16 hours a day.  I don't have microsoft nhave word more and I miss the fonts that he used and for a reason that these fonts are missing off the coast of my e-mail program when they were there before the failure and the loss of MS Word IE fonts. Sorry so long winded. Taylor

  Taylor,

  No long-term, just percise. Liked it.

  (1) you can observe with the box to open, but get a grounding strap. (for example).

  (2) If you want to WIN 7 64 bit, see here

  (3) memory is available here (2 PCs 4 GB)

  (4) MS Office Starter 2010 is still free.

• Pavilion p6610f Desktop: software blocking Wifi transmission

  Pavilion p6610f Desktop 64 bit Win 7 Home Premium SP1.  I had problems with the buffering and freezing in my browsing on the internet. I contacted my Internet provider after doing all the clean to the top of my computer that I knew how to do. After an hour or two with the agent to remote access to my computer and them telling me that everything was going well at their end, I asked why the icon Wifi in my taskbar shows only two bars on a possible 5 when my computer is right next to my Wifi modem? I was told it was probably a software interfering with the Wifi transmission.  I ran Microsoft malware and adware programs removal & Ms. Mr. Fixit.  I have MS Security Essentials and have not all problem reports.  My provider Internet telling me the truth?  Is the lack of Wifi reception with software that I can't find? I looked in my programs & features and does not see all unauthorized programs may have snuck in and I deleted some. The only thing that is new is a HP Envy 5660 all-in-one that is set up wireless.  It has been suggested that I have reformat my hard drive and reinstall the essential programs to see if that helps. But, acckkKKK!  I don't want to go through all that again! I did twice before and have installed two others had readers since I've owned this computer and don't want to if not necessary!  I thank in advance for your time and your knowledge if you decide to advise me.

  Hi there @TY965

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are getting a signal strength wireless low, despite the close proximity. I'm happy to help you with this.

  In some respects, being too close could be part of the problem. Because of the arrangement of the devices, it could be that the receiver on your desktop does not receive a clear signal, due to the metal in its framework. I suggest moving the router wireless in the location and see if you can get a better signal. This page has also some other useful information which may affect the strength of the signal.

  How to get a better Wireless Signal and reduce interference of wireless network - howtogeek.com

  If that does not help or make a difference, then you can try looking at your system itself. Start with the next page, and if there is no improvement, wok your way through the other sections, I have included, until it is resolved.

  Troubleshooting your wireless network and Internet access (Windows 7)

  Focus on the management of feeding your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  I hope that this help and if anything here solved your problem, please mark this message as a solution.

• My built-in webcam on my HP Pavilion TouchSmart desktop computer will not work on all programs, online or offline and will not display on my computer.

  My built-in webcam on my HP Pavilion TouchSmart desktop PC, product #: FK935AA-ABG, model #: IQ515a, does not work, that is to say, it does not appear on my computer as a work/usable/functional/real webcam. The green light next to the real webcam above the screen doesn't flash or turn on (there is no light indicating that it is not on). I don't know how to activate it or make it work. On Windows Live Messenger, the name of my webcam does not appear on the drop-down list, and I want to know why it does not appear only on MSN but Skype, HP TouchSmart, YouCam and other online and offline programs.

  Have you tried HP support?
  http://h20000.www2.HP.com/bizsupport/TechSupport/ContactHP.jsp?lang=en&cc=us&docIndexId=61598&TaskID=115&prodTypeId=12454&prodSeriesId=3733137
  b Eddie

• PS and HP Pavilion p6115y desktop video card update help

  I have a HP Pavilion p6115y desktop computer. Windows 7 64 bit dual core AMD processor. 4 GB of ram with integrated Nvidia 9100 video. I just bought an EVGA GTS450 and found that it requires a 400w power supply. My p6115y is supplied with a 300w ps. What ps would be necessary and would be the case? This may damage the motherboard by uping the ps? Should I exchange the GTS 450 for something lower? Hope not because I want to run SKYRIM and I feel a little studdering with Oblivon.

  Hello

  You might want to look at the requirements system recommeded for SkyRim.

  Review the specifications of performance ATI and NVIDIA . Look at the specifications of strip memory bandwidth and level of DirectX support.

  PSU Corsair CX500 will adapt to your PC and has enough power for most video cards except the higher end video cards.

  For a video card, ATI 6850 is a very good buy at $130 after rebate.

  Open your PC and do some measuring to ensure that the map will adjust (it should).  The adjacent slot on the PCI-E x 16 slot must be vacant.

  These "how-to" HP articles should be useful.

• Upgrade graphics card for HP Pavilion A6720Y desktop computer

  I have the HP Pavilion A670Y desktop computer and was thinking of upgrading the graphics card GeForce 9100 integrated to a Radeon HD5850 and adding a new power which would allow this change. Power side is there a reason that my office would not be able to support the Radeon HD5850?

  It's your motherboard.  Make sure that the slot next to the PCI-E x 16 card is open as 5850 is a wide double card.  Your PC has only a 300 watt PSU so 5850 is only in need of a much larger power supply.  Look at the 12 + rating required by the 5850 and then choose the new modular power supply.  Buy not only on power alone.

  Your PC has a practice of small Tower and the 5850 will consume more power (wattage) compared to your existing integrated video processor which means more heat. Be prepared to deal with this issue.  The 5850 is perhaps too card for your PC.

  Don't forget that your PC system BIOS is up to date.

  Open your Pc and clean all the dust. Then a measure of your current diet and buy one that is modular with almost the same dimensions.  Then measure around the PCI-E x 16 slot to make sure that the card fits.

  Review the specifications of performance ATI and NVIDIA . Look at the specifications of strip memory bandwidth and level of DirectX support.

  How to replace a power supply.

  How to replace a video card.

• I installed Firefox (10) sync on my laptop instead of my desktop. How do I uninstall, so I can install on my main computer? In the only option of synchronization tools is "Synchronize now".

  Question
  I installed Firefox (10) sync on my laptop instead of my desktop. How do I uninstall, so I can install on my main computer? In the only option of synchronization tools is "Synchronize now".

  Hi Rachel!

  There is no need to uninstall anything, both devices will share information and that there are no 'master-slave' logic on Firefox Sync. All devices are identical.

  Take a look at this article which explains how to configure your computers: How can I set up Sync on my computer?

  The important part is to select "I already have an account" when you set up your second computer.