card network disappeared on each startup but starts working well after each reboot.

Similar Questions

• Pavilion DV-6-6195SP: I bought a card Wi - FI from the manual but none work DV6-6195SP

  I bought a card Wi - FI from the manual but none work

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-entertainment-notebook-PC-series/5082212/model/5...

  The map is:

  Atheros WiFi 802.11b/g/n 1 × 1 9485GN and 3012 adapter Bluetooth 4.0

  SPARE PART: 655795-001

  The BIOS is saing Traoré wifi is unknown

  What is the problem and if not this car what is the best card wifi for my model?

  Thx for the advice I did some research and found a mod of bios that solves everything for those who need, click on the link below:

  http://donovan6000.blogspot.IE/2013/12/modded-BIOS-repository.html

  FOR ALL THEM HO HAVE THE F.1B

• I have a Creative cloud photography Plan (CC of Photoshop Lightroom). There a serial number for registration? because I have received no series by mail, but it works well!

  I have a Creative cloud photography Plan (CC of Photoshop Lightroom). There a serial number for registration? Because I have received no series by mail, but it works well! And he never asks me to activate with a serial number. I just pay monthly Plan.

  I ask this question because I have to change the computer and I didn't have trouble disattivate App and put it on the new pc!

  Can I turn off just from the creative cloud by disconnection of the account application, uninstall the application and then install on the new pc?

  The CC has not need any number of series, it is based on an Adobe ID.

  In the case where you are prompted for the serial number then you can refer to.

  • Creative Cloud applications ask for serial number
  • Re: Incorrect serial number?

  Concerning

  Baudier

• I upgraded to firefox 3.6 recently 11, but firefox11 works well with my windows 7. It became slow and strucks on for 6 seconds for each click.

  11 Firefox hangs frequently for about 6 seconds for each click as switching between tabs, closing tabs, opening new tabs.
  by clicking a link etc,
  3.6.17 worked well, but 11 Firefox is too slow.
  problem is the same with version 4 and 4.01
  can someone please help me to solve my problem

  I'm sorry that you have problems with Firefox doesn't work is not as fast as it should. I'd like to help you here so that you manage Firefox running at great speed.

  Firefox, try to start Firefox in Safe Mode. It temporarily disables your extensions, customizations, etc. so that we can see if they slow down Firefox. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker. Once you do, you can disable this add-on.

  I also see you have advise McAfee Site. I would recommend disabling that, as it is known to cause leaks of massive memory than Firefox slow down

  If Safe Mode does not work, you can also try updating your graphics card driver. Update your graphics drivers to use hardware acceleration and WebGL reading can show you how to do this.

• P7 - 1520t: PC does not start after a stop, but it will be after a reboot

  Since the last update March 1, my pc went all black screen and nothing happens, so I downgraded to its original condition with w8, with all fees have not kept what it is, I'm back on w10 and my problem remains the same, I can't start windows , not even with the recovery DVD or USB support. I have to remove all the power of my motherboard, so that I can boot and F1, I have install all the latest drivers available for all my components and remove all my material added always the same, if I restart without problems, but if I stop it when the CPU turns on, but windows will never load.

  Thank you in advance to those who can save me!

  P7 - 1520t - Intel i5-3330

  -16 GB of ram

  -64-bit W10

  -Integrated intel hd graphics

  H-Joshua-H61-Μatx (MB)

  I installed W8 if UEFI and everything worked well, have store 8.1 trough upgrade of windows, and I'm happy, all my stuff is working properly, is not going to install 10 tho... was good OS, but with all that is happening I will stay at 8.1, I put more money on fixing W10, they didn't even know what to do.

• Satellite P300 - screen empty since turned on, but sometimes works well

  HELO,

  I have a Toshiba Satellite P300-1F0.
  The screen is blank when I turn it on, even the splash screen, and I can't hear the sounds of windows startup.
  Although if I turn it on, and besides, it will work after a few tries, sometimes it works the first time, others, I turn on and off like 20 times until he finally started working. When it turns on, it works perfectly.

  I tried:
  by pressing the power button for 1 min while the charger and the battery
  Manually check the RAM.
  reinstalling and updating graphics and monitor pilot card.
  shaking the lid to check if there is a broken cable
  but none of these things worked

  I also noticed that the computer works with an external monitor (TV) connected via hdmi.
  If I turn on the laptop, the screen is blank, no sound Windows played and after a few minutes I plug the cable hdmi, the Tv shows that windows was, and sounds begin to work from there.

  When you are connected to the TV, I try to turn on the screen by pressing (windws key + P) but it does not work.
  In the menu screen resolution, windows cannot detect the display, only the TV

  Can someone help me? What can cause the problem thr?
  A soluction?

  Thank you for your time,
  Adriano

  As I see that you have started two identical threads. The second is not http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=287272

  Please continue the discussion on the first thread.

• Satellite L70 - no sound from speakers but headphones work well

  Hello

  I have a sound problem with my computer (satellite 70 L)
  I tried everything but nothing to do, no audio output, but plugging the headphones into the audio port reinstall his works well, so I uninstall Conexant, even for its dts but its still doesn't work does not,

  Thank you

  In my view, the symptoms of laptop are clear enough: he does not resemble his driver or system problem because the sound seems to use the headset.

  I think that the internal speakers are defective. It seems strange to me that the two speakers have begun to malfunction at the same time, but this problem may occur.

  But before you contact the authorized Toshiba maintainer to fix, I would recommend you to recover the laptop just to be sure that this problem is not related to the failure of the system/software to 100%.

• Messenger on Mac just disconnects and says service unavailable or something, but it works well for a few weeks.

  Messenger on MAC disconnects and says service unavailable or something, but it just works well for a few weeks... really annoying, please help!

  original title: WHY IS MSN MESSENGER 8 MAC NOT WORK?

  Hello

   
  You can display the query in the links provided to get better assistance.
  http://mac2.Microsoft.com/help/Office/14/en-us/Messenger/
  http://mac2.Microsoft.com/help/Office/14/en-us/Messenger/category/9cd3c59c-3a5e-441b-ac69-3318ea0398a7

• No internet connection AFTER startup, but only works during the boot.

  Hi all

  Have a Win XP MCE (Media Center Edition) Dell laptop running.  I can only connect to internet when the system is even start, and I click on the shortcut to IE or Firefox. Once the system completes the startup it connects me to the internet WITHOUT problem & with good signal and good connection speeds.  System connect wirelessly through a Linksys router.

  If I left the initialization of the system ended up - and I'm trying to connect to IE or Firefox - the hourglass appears for a minute and then disappears and I get no connection!

  This means that I must always start the internet connection while system is always initialize, and if I end the connection I get only back to restart system in place and opening connection when appear the icons on the desktop for IE or Firefox!

  I am puzzled by this and have no idea what to do to solve the problem!
  TNX a lot!

  Cindy

  Hello

  • What were the changes made before the issue occur?

  Verify that if the problem exists in Mode safe mode with networking, if the computer works as expected in mode safe mode with networking, and then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. it is a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

• Why Firefox type and slider are slow to a normal start, but everything works fine when I reboot in safe mode?

  When I open FIrefox normally, the movement of the cursor is very jerky - seems stuck on each link. In addition to typing in any box is delayed. When I restart with disabled modules and in safe mode, the cursor moves very well and typing is normal. I disabled all my Add - ons, but that doesn't seem to help as whenever I restart, the cursor jerky and delayed typing again. What's wrong?

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

  In the Firefox Safe mode, these changes are effective:

  • all extensions are disabled
  • the default theme is used (no persona)
  • userChrome.css and userContent.css are ignored
  • the layout of the default toolbar is used
  • the JIT Javascript compiler is disabled
  • hardware acceleration is disabled
  • plugins are not affected
  • preferences are not affected

• When I turn on my computer, already set up profiles disappear and are replaced by 'Kiosk' and 'other users' options that require passwords. I can get into 'other users' and find my previous user accounts, but lose them again after the reboot.

  I bought a laptop with Windows 7 installed a few days ago. I started to set up user accounts, administrator and a guest. So far, I had been able to shut down and restart with the accounts of users even reappear. I turned on my computer and two 'user accounts' had replaced my previous. Named "kiosk", which requires a user name and password which I do not have access, and one named 'other users' that requires a user name and password. I type in comments and no password and then I can access the guest account. When I disconnect my administrator profile is available next to my usual guest account. Restart the "kiosk" and "other accounts" reappear. If it's any help, as soon as I put on my computer, I had named MDX kiosk and administrator accounts. I deleted the account kiosk MDX. I don't know if this is related at all. It is not necessarily a problem, but a disadvantage however and I panicked when this popped up on my computer.

  Yes, you can uninstall MDX (it is called the digital experience of Microsoft) and it will remove the kiosk account and no trace of it, and then restart your machine. All other accounts on the machine should stay, but I would like to make a backup first. This should solve your problem. Associated with the store, you bought from should have done that for you, why they failed, I have no idea (we are instructed to do before the release of the machine to customers). If you don't mind asking me, where did you buy the machine?

• SFC.exe find corrupted system file and confirms the determination of repair at the next startup. but are still present after running sfc scannow new windows 8

  I run sfc/scannow;  results. resource protection finds files corrupted and managed to fix it. System file repair changes will take effect after the next reboot. but after the restart without change, I run sfc/scannow and files are always corrupt

  system not finish booting and stuck at halfway. Also the programs would not open. I had installed some drivers from the Asus download site. before it began. so I uninstalled it, but no help, then I ran the SFC scan who gave me the message about corrupted files, I ran a system restore and everything works although now I have same re installed all the updates except some Akami download which was also offered on the Asus downloads thanks. for your quick response

• 11 workstation reports (0xC0000005 Access Violation) Crash at startup but VMs works without any Apparent problem

  A new installation of the workstation 11 (11.1.0 build 2496824) on a new installation of Windows Server R2 Essentials 2012 crashes on start up (front of start/resume all VMs) with a message box indicating a fatal error of VMware Workstation (vmui) occurred and identifies the exception 0XC0000005 access violation).

  If I click OK in the message box, work station closes.  If I don't click on OK in the message box, I can always transfer the focus to the window workstation and workstation seems to behave normally (that is, I can start/resume / suspend virtual machines and virtual machines behave normally).

  I have attached the log file.

  Any thoughts on what is the cause?

  This problem is fixed in VMware Workstation 11.1.2.

• I use a Belkin USB wireless adapter. In Device Manager, I see this same adapter listed several times... with a yellow exclamation mark over it. However, an entry for this card will not have any problems indicated and work well.

  I think that whenever this USB adapter is removed and reinstalled, the system is seen as a new USB device.  However, if I try to uninstall the list in Device Manager showing a yellow exclamation point, the system will not... I get a message saying "Uninstall failed...". This device may be required for the system startup.
  Suggestion?

  Hello Fgibson1911,

  Thank you for your message.  All of these entries stay after you restart your computer?  In addition, what happens when you search for new hardware?  Try this and let us know the result.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on Device Manager.
  Right click on "Network adapters", and select "search the hardware changes.
  The "Yellow!" entries disappear?
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• ECOSYS P6026 ca is not airprint in color... but that works well when sent from a PC

  trying to print wireless ECOSYSTEM P6026cdn in color.  Works fine with sending over the network from a pc, but will not work with ipads

  AirPrint on iOS devices is NOT based on the same printer driver installation. It's really to the manufacturer of the printer to provide support for the functionality of the printer for iOS platforms. When you print from a Windows PC, you do not use AirPlay. This isn't really a problem for Apple network.