HP Pavilion 15 p105nr: AHCI mode Activation

Similar Questions

• Pavilion 15 p204tx: activate the AHCI Mode

  I want to replace the existing hard drive in my laptop with an SSD. While reserching on this subject, I learned that I need to change the SATA Mode from IDE to AHCI Mode. I tried to find this setting in my BIOS, but I wasn't able to find it. I would be grateful if you could help me with this.
  Thank you!

  Hello:

  The drive of your laptop is already set to AHCI in the factory and cannot be changed in the BIOS.

• Pavilion p077tx: AHCI mode enabled by default?

  I have attached a screenshot just told me is AHCI mode enabled or not? Because there is no information in the BIOS

  for one SSD installation, the device manager should see the SSD

  He sees only one volume, it does not

  the new Bios from HP is AHCI mode enabled by default

  for the clone readers install or use USB 3.0 to 2.5 "SATA III Hard Drive adapter cable w / UASP

• AHCI mode default endabled?

  The system is a Pavilion dv7 4285dx.

  I just wanted to get possible confirmation that the AHCI mode is active by default for this model of laptop?

  Unfortunately, there is no option for this in the BIOS (matter of fact, there's really not a lot of options for what IN the BIOS).  After Googling autour, I found more people want to DISABLE AHCI mode rather than ENABLE.  In my case I wanted to make sure AHCI MODE, as I swapped the windows for one SSD and files on the standard HARD drive.

  Thank you

  This is the original factory specifications for your HP Pavilion dv7-4285dx Entertainment Notebook computer. Later model HP portable computers ship with Windows Vista or Windows 7 came with the set of default RAID or SATA AHCI controller. This is probably the case with your computer.

  In general, the only time where you can put the SATA controller in IDE mode is if you install Windows XP as AHCI is not supported under XP by default.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Satellite Pro L300 - Dual boot with the AHCI mode

  Type of product > Notebook
  Family > Satellite Pro
  Product series > Satellite Pro L series
  Model > Satellite Pro L300 24L
  Model short-term > PSLB9E

  Hello.

  XP and Seven is installed in dual-boot on my laptop and I use EasyBCD to choose which system I want to start.

  To start XP, I need to enable "Compatibility" (Controller SATA in BIOS mode) and seven is "AHCI" must be activated.

  Is there a way for my two OS was started without making changes in the bios?
  Y at - it an update to correct this problem (or alternative)?

  Thank you in advance.
  Marc

  Yes you can do it but I'm afraid, you must reinstall Windows XP Home edition m.
  Why? Because before beginning to install Windows XP Home edition, you must change it to AHCI mode, launch the installation of Windows XP Home edition and before you start you need to load the SATA driver (via F6 I think).

  Long time ago, we have discussed a lot about this on this forum then use the advanced search anc check options other postings on this subject.

  By the way: check http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm

• HP Pavilion dv7-6103ei AHCI/RAID?

  Hi all

  Greetings from a poster first.

  I have a Pavilion DV7-6103ei laptop, and it has been modernized with a Samsung PM810/series-470 128 GB SSD with a 1 TB of HARD drive in the second span.

  I'm not necessarily interested in a RAID configuration, but I prefer the disks to run in AHCI mode.  However, I see that the BIOS does not support changing the interface of AHCI.

  I did some research and it seems that these laptops do not support AHCI.  Is this correct?  I'm not able to find information on the RAID, which allows to AHCI when there is no current RAID configuration.

  I have intel that Rapid Storage Technology installed.

  Is my only option to run these HDDs in IDE mode?  Seems a bit primitive for a laptop as powerful.

  If anyone can advise me on a work around or so to be able to operate in AHCI mode, let me know.

  Thank you.

  Greg

  You are the very welcome, Greg.

  Your BIOS of laptop computers is indeed set to AHCI and unfortunately, I do not know why the HARD drive is labeled as a scsi device.

  I guess that's just the Windows name assigned to the drive.  I've seen this before on other PCs.

  You can install the latest driver from Intel's Intel RST and to see if it makes a difference what anyone.

  3rd file listed.  Was also the AHCI drivers too.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24006

• HP t3720: motherboard and ahci mode

  Hello. I need to install a new SSD, but I can't find the ahci mode in the BIOS (I've already put 0 in HKEY_LOCAL_MACHINESystemCurrentControlSetServicesMsahci\\\)

  The motherboard A8M2N-(NodusM3) support ahci mode?

  Thank you.

  Yes, I see that (I do not understand because this chipset does not support the AHCI), but the controller cannot be changed on AHCI, nor a BIOS update that will change.

  If your PC has a disk RAID controller in the BIOS, which can give you slightly better performance on IDE mode so you can run with active RAID.

  AHCI will simply not happen on your model.

• The card mother MS-7184 (AmethystM) in my old HP PC takes in AHCI mode?

  First of all, thank you for taking the time to read my post!

  I recently bought an OCZ Aligity 4 256 GB SSD drive. I want to use the SSD as drive replacing the original hard drive in my old HP Pavilion Media Center TV m7334n desktop PC. Here is the link to my pc:

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=1821850

  I know that the motherboard identified on the Web site above for this model of PC is A8AE-(AmberineM), but the motherboard I have is MS-7184 (AmethystM), the specifications of the motherboard is here:

  http://support.HP.com/us-en/document/c00378480

  I updated the BIOS with the latest version (3.47, 03/03/2006) I can found on the HP website. In the BIOS, I can't find any info on the AHCI support. My questions are:

  1 - is the card mother MS-7184 (AmethystM) in my old HP Pavilion Media Center TV m7334n Desktop PC support AHCI mode?

  2. how to configure CMOS when I use the SSD as my main drive on the old HP computer?

  Note Please that I have aleady copy drive hard whole orginal on the new SSD and I started my computer on the new SSD. This works. I have another post questions on the recovery of the system on the SSD, the post is here:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g/system-recovery-doesn-t-work-on-cloned-SS...

  Thank you!

  You are the very welcome.

  I leave these settings at their default values.

  You have the SSD connected to sata port, and it must operate to the maximum 150 Mbps transfer speed, 133 or 100 no matter what readings are displayed, as would an IDE drive.

  The problem is that since there is no AHCI setting, the drive cannot enjoy the native command files or TOPPING.

  Aside from that, an SSD should be better that a standard SATA I mechanical drive or IDE hard drive.

  Even subjectively, you should 'see' a difference in sensitivity of disc, not you?

  Improved time, faster startup time for research, for example.

• activate the AHCI mode on Envy Dv7 - 7398ca with SSD

  Year old i7 envy Dv7 - 7398ca notebook with SSD Samsung 840 Pro x 256.  Windows 8.1

  I've updated to the SSD shortly after I purchsed the laptop.

  No problem except the Samsung SSD Wizard software keeps tagging me as AHCI mode is disabled and must be enabled and I do not see it in the BIOS.

  Or I see anything that relates in the device as IDE Manager or other.

  It seems that the SSD is optimizing not itself based on the fact that it considers that AHCI is disabled.

  I apologize for the issue being this topic seems to be beaten to death over time, but I do not see what relates to this model or similar.

  Thanks for all the ideas.

  The system is set to ahci or RAID mode. You can tell that by opening the Device Manager and look at the storage controllers. Anyway it is optimized for SSDS and TRIM is activated. You can simply remove the program from Samsung and rest assured that your SSD is optimized.

• Cannot change SATA RAID in AHCI mode in the BIOS.

  Hi, I use Pavilion p6142p Desktop, WIN7, a harddsik.  The SATA BIOS has been set to RAID by the default value of the factory.

  I put two new hard drive in this office, they have different sizes and different rpm speed, I don't want their RAID.  So I tried switch the BIOS SATA AHCI mode, so I can't start the win7, win7 gave me two choices: repair or return, repair is not too.  After I change the BIOS, everything is OK.

  But I have to put all three harddisk in this office. So my question is:

  I use RAID in this PC?

  Do I have to re - install win7?

  ....

  In any case, what should I do?  Thank you.

  d1ad1a,

  RAID will work with unlike devices.  You can always install your new discs and give it a go.

  It seems that the ugly way is going to be your only for the ACHI mode to work. Alternatively, just live with what you have.

• AHCI mode support?

  I have a hp dv6 6178sl (i7 2 - gen 2670qm, Intel HM65 motherboard) with win 8 is installed.

  Is my supported portable ahci mode?

  I bought an ssd unit, so I need activate this mode... under the bios I can't find this setting... but under windows, in 'Device Manager', I see this point:

  Controller IDE ATA / ATAPI--> Mobile Intel (r) Express Chipset SATA AHCI Controller

  I so ahci activated already? Can I put in my ssd without any problem?

  Hi, Milite777:

  You are 100% correct.

  BIOS of the laptop is on AHCI by default, or you would not have seen that the Intel (r) Mobile Express Chipset SATA AHCI Controller listed in Device Manager under IDE ATA/ATAPI Controller section that there are listed.

  You don't need to do a thing... just remove the battery and the a/c adapter and install your SSD.

• Cannot set in AHCI mode for disc SSD NB300

  Hello

  I have a Toshiba NB300 netbook, running Windows 8 Pro 32 bit, very happy with it!
  I have a Corsair 3 112 GB Force SSD drive is installed, and everything seems to work fine!

  Read on the SSDS, I see that a better performance for executing the SSD in AHCI mode.
  So I went to menu configuration of startup and changed compatibility in AHCI mode.
  I actually tried a few times, always with the same result, failure!

  When the system is trying to start I get a message saying that there was a problem and that
  the system is trying to gather information.

  The only solution is to go back in the program installation and handed to the compatibility mode.

  The BIOS is up to date, and I just don't see any way to solve the problem.
  I really want to get best performance with this net book as possible.
  I have a screenshot of the details of Speccy SSD drive, but I don't see a way of fixing?

  If anyone can advise me on how to get mounted AHCI mode and go that I would be really grateful!

  Thank you

  Chris

  Unfortunately on this forum we don t have reports on the use of the DSS on NBs I have NB520 and I would use the SSD for, but so far I didn't find the right.

  As far as I know by default BIOS is set to AHCI mode. What operating system you have installed? The original that you got with your laptop or your own version? Have you installed the s Intel Storage Manager of the Toshiba download page?

• Satellite P300-20-player not recognized in AHCI mode

  When I set the SATA to AHCI - Mode controller Mode. Doesn´t BIOS find the DVD more. I have also flashed the new Bios, but failure still exist.

  Can someone help me?

  Hi franckymaus,

  What model of laptop you have exactly?

• NB 100, can't enable AHCI mode. Official driver will not install. help please!

  Hello

  Is someone can you please tell me how can I activate the AHCI mode after you have reinstalled Windows XP Pro on the NB 100? I try to install the official "Storage Manager drivers" but windows tells me that the machine does not meet the requirements.

  Help, please

  Yes, you can install the AHCI drivers * after * installation of XP in Compatibility Mode.

  Directions for use:
  http://support.Microsoft.com/KB/314082/en-us

• Can Equium L40 - I change hard drive SATA to AHCI Mode?

  Hello

  Anyone know if it is possible to change the hard drive to SATA AHCI (or same IDE) mode in the BIOS?

  I see the hard drive in the BIOS but I can't select to make changes as long as it is "gray".

  I installed the latest version of the BIOS, but that made no difference.
  Thank you very much.

  I put t have this model of laptop, but usually the controller SATA in BIOS mode options are AHCI or compatibility.
  I presume that it is set to AHCI.

  Your laptop's SATA HDD so I put t understand why you want to change anything. Using the AHCI mode HARD drive can operate at full speed.