Card nvidia, Linux Mint and W520?

Similar Questions

• Satellite L50 - B - 1 K 1 - touchpad Linux mint

  I have a Toshiba satellite L50 B 1 k 1, after I installed Linux mint and I can't do the touchpad works, I need to use an external mouse
  Ι tried to press FN + f5 key in order to activate the touchpad, but unfortunately it is combination drives to the DISPLAY mode where normally should come out with the key FN + f4 , any ideas?

  When I go to the control panel mouse and pad touch I can see the external mouse and SynPS/2 Synaptics touchpad recognized by the system... both are enabled, but the touchpad does not work

  Problem, it's that Toshiba does not support Linux so you will not be able to find lots of information about Linux on Toshiba laptops.

  Try to check some Linux forum. You may be able to get a useful tip to other Linux users.

• "Connection server failed" constantly popping up on sites popular randomly and unable to use FF on Linux Mint 17.1

  As above, websites at random and many of those that I use, say "Connection server failed" and then I can't even go to the Web site. I use FF 35.01 on Linux Mint 17.1. This has never happened before... Pages work fine on another device or Chrome!

  I found my problem!

  I checked the link you gave me, but none of the error messages that are matched. So, I googled the error message, and he apparently had to do with the date of my computer. The date was one day! And what to do with some https sites... Here is how I fixed / solved my problem:
  http://www.genuinescope.com/blog/sec_error_ocsp_future_response/

  But thanks for helping me narrow my problem!

• I need to reinstall my Linux Mint, therfore also Thunderbird. How can I save the addresses and all my messages (copy and again after installation Thunderbird)

  I need to reinstall my Linux Mint 17 companion, therfore also Thunderbird. How can I save the addresses and all my messages (copy and again after Thunderbird installation)?

  You will need to backup your Thunderbird profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring #Manually_back_up_the_profile

• 33 Firefox linux mint: no fullscreen no right mouse, no page down and F11 doesn't work

  full screen sometimes my right mouse doesn't work.
  Again F11 does not work and I need to enter/exit full screen via the menu.
  PageUp / PageDown keys don always work in sull screen

  Firefox for linux mint 1.0 33.0

  Hi Shankaraya,
  This phenomenon happens with a packaged version of Firefox or is happening to Mozilla-hosted version of linux?

• Can't play CRYSIS and GEARS OF WAR on portable computer with card Nvidia 7900 GS?

  I wonder if anyone here have the chance to play two games CRYSIS and GEARS OF WAR on PC Toshiba laptop with Nvidia 7900 GS cards.

  The reason why I asked this question-> because I have 2 problems:

  (1) GEARS OF WAR first need new driver for Nvidia telling me this massage * to run Gears of War with your current hardware configuration, you must install the following software update or updates: *.

  * + NVIDIA ForceWare 163.44 driver *.

  * If you do not install this software, at some point, the game ends and your progress will be the lost.* and give me another massege when I click on play

  the massage is * this application has failed to start because xlive.dll not found. Reinstalling the application may fix this problem *.

  (2) on CRYSIS game working, but with very poor quality and a few fast breaks during playback I tried to graph affecting minimum put the same thing happen...

  I hope that someone here can give some advice on the above issues, and a suggestion for a new driver will be appreciated ;)

  see you soon
  abman

  Hello

  _ _Regarding point 1)

  Check out the www.laptopvideo2go.com site and to update the graphics driver!
  This site contains some useful nVidia drivers that can run on laptops.
  But note; pilots can be used only at your own risk!

  _ _Regarding point 2)

  Crysis needs huge resources for laptop. I think that the card Nvidia 7900 GS is not strong enough to run the game with full graphic details!
  I read on some game sites that you need a desktop PC of very high technology with that of the new series of nVidia 8600 to the smooth running of the game!

  Best regards

• VMWare Workstation 12 and 18 of Linux Mint (Ubuntu 16.04) and vmware tools or open-vmware-tools

  I created a new virtual machine using VMWare Workstation 12.1.1 build-3770994 with a guest OS from Linux Mint 18 (which is built on top of Ubuntu 16.04). I have two monitors on my system, the two 2560 x 1440. I am unable to get this virtual machine Linux Mint 18 to cover all of my two monitors when I disable "Accelerate 3D graphics" in my vm settings, I get an error. I have another Linux Mint 17 VM running on the same VMWare Workstation 12 on the same host machine from Windows 10 and it is able to expand on my two monitors very well with "Accelerate 3D graphics" disabled, but he does not open-vmware-tools.

  I have read instructions telling me to install open-vm-Tools-Office in this guest operating system of Linux Mint 18. I did it. Then I restart the guest operating system. When starting, I can click on 'Enter full screen mode' in my menu of VMWare Workstation, and the guest OS has a monitor as expected. When I then click on "Cycle multiple monitors", I get the following error. "The virtual machine could not be changed to the selected screen layout. If you add a monitor to the host computer, you must turn off and turn on the virtual machine to use this monitor. »

  

  I can optimize my VM to automatic adjustment, only one of my two screens, but not both. I tried to uninstall and reinstall open-vm-tools, open-vm-tools-desktop and restart. I tried to use /vmware-tools-distrib/vmware-install.pl's original vmware tools and who does not work either.

  In my vmware.log, I get these two lines that occur when I get the above error.

  2016 07-12 T 15: 43:19.068 - 06:00 | MKS | I125: ToolsSetDisplayTopology: send rpcMsg = 1 DisplayTopology_Set, 0 0 2560 1440

  2016 07-12 T 15: 43:24.768 - 06:00 | MKS | I125: ToolsSetDisplayTopology: rpcMsg sending = DisplayTopology_Set 2, 0 0 2560 1440, 2560 0 2560 1440

  2016 07-12 T 15: 43:24.853 - 06:00 | vCPU-1 | I125: TOOLS of the call to DisplayTopology_Set failed.

  When I activate "Accelerate 3D graphics" with the configuration described above, I am able to use both of my monitors. Why is this the case?

  I think remember having to disable "Accelerate 3D graphics" in my Linux Mint 17 comments vm because it would crash randomly. I try to run this VM Linux Mint 18 with 3D acceleration and see if it crashes, but why is there a difference with spanning multiple monitors?

  Thank you.

  I didn't experience this problem for a few weeks. I don't have a definitive answer to my original problem.

  I installed Mate instead of cinnamon 3 to my MINT 18. Then, I created a new VM with Ubuntu Gnome 3 16.04 running as the OF. I did have problems with both approaches. I also tried using Firefox as my main browser instead of Chrome, as I read that Chrome can have problems of memory. It could be a combination of several of these changes that have allowed me to work without problems.

  Knowing what I know now, I think the move away from cinnamon 3 is what seems to have fixed my problems. I can certainly say that you use Firefox consumes less memory, as I can monitor the monitor system under Ubuntu. Chrome would eventually eat all my system memory, that I could see. The extent of the why? I'm not sure at this point.

• Please help with WRT54GS v.6 and Linux Mint 9 aka Ubuntu 10.04

  I use an Asus PCE - N13 wireless adapter.  I have no problem connecting to the router on Windows XP and Win7.  However on my linux, I see the SSID, but it does not connect to it.  I check if the WPA/WP2 setting is correct and password is correct.  The router uses the latest firmware.  Any help would be appreciated.  Thank you!

  If you are able to connect to the network wireless on windows computers, so I think that the router is working properly.

  Make sure you have the correct network key.

  Open the router configuration page. Go to the tab wireless security wireless tab. Check the wireless security settings. Go Mac Wireless filter sub Tab. Make sure that the wireless MAC address filtering is not enabled. If it is enabled, then disable the wireless MAC address filtering.

  Go to advanced wireless settings void / tab Change the interval of tag to 75, RTS threshold to 2307, 2306 fragmentation threshold.

  Delete the profile of the network wireless recorded from your Linux computer and retry the connection to the wireless network.

• Firefox sync (Linux Mint 17.02)

  Hey there! I tried to set up Firefox sync. Remove the .mozilla folder in my home directory synchronization does not work yet to reinstall Firefox several times. I tried to use Firefox 41.02 and 42.0.
  The sync connection is successful and Firefox tries to sync (blue circle), but nothing happens. When you go to about: preferences #sync, then to 'Manage', it takes a while to load before you get an "unexpected error".
  I'm trying to sync between my laptop and my desktop, the two Linux Mint 17.02.

  Any suggestions?

  Hello

  Your first journal suggests synchronization completed. It has a few warnings bookmark weird and disturbing, but otherwise it's okay.

  Your second newspaper told me that you are on a network of Unitymedia.

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=1118958

  You must reduce your MTU, so it doesn't cut it connections.

• Since the update to Thunderbird worm. 41 it is fixed as the preferred application for browsing the web in Linux Mint 17.2?

  What could be the cause of Thunderbird to set as the favorite in Linux Mint 17.2 browser client. If I reset it to Firefox, the next time I open Thunderbird, it still resets the preferred setting Thunderbird client. When I open Firefox, it pops up a window saying that this isn't the default browser, asking if I want to change. When I click Yes, any link I clicked in Thunderbird previously will now appear in new tabs.

  How can I fix it?

  Linux Mint just put update to Firefox_41.0 + linuxmint2 + rafaela and now Firefox works fine with Linux Mint.

• How to install check speller of the Serbian language in Linux Mint

  Hello, I use Thunderbird 31.6.0 on my Linux Mint 17. I tried to follow the instructions that are on this web site to install dictionaries new Auditors of spelling, but it does not work. It is said that it is not available for my platform. However on my Windows computer it says that this version is not supported. In the comments of this page in someone explained workaround. You need to download the add-on, rename the .zip extension, unzip it and copy the files unpacked in C:/Program Files/Mozilla Thunderbird/dictionaries. I did and it worked!

  Is it possible to do a similar thing with Thunderbird for Linux Mint?

  I wanted to do the same trick but I didn't know where is the Linux dictionaries folder.
  I did some research on Google and understand. So here's how to do it:

  1. go on here https://addons.mozilla.org/en-US/firefox/addon/%D1%81%D1%80%D0%BF%D1%81%D0%BA%D0%B8-%D1%80%D0%B5%D1%87%D0%BD%D0%B8%D0%BA-serbian-dictiona/

  2. right click > save link as
  3. you will get a file as, rename the file and be sure to make it .zip
  4. unzip the
  5. in this new folder as you open dictionaries folder and copy all the files you have there
  6 open your file manager and go to/usr/lib/firefox/dictionaries
  7 stick y files you just cope, you do need to root premison to do so then right click in the window > open as root and then paste it

  That's it, you'll have dictionaries for Firefox and Thunderbird.

• Hello from Firefox with camera backwards (with linux Mint 17)

  Hello, I am running Firefox 36.0.1 and I tried the new addon from Hello. Unfortunately, my camera is displayed upside down. It was the same problem I had using Skype and I had to update libv4l and that worked. It still works now for Skype, but Hello the problem is back. (I use linux Mint 17)
  Any suggestion?

  Skype and Gtalk for linux are 64-bit by default, but Firefox is a 32-bit program (for now). LD_PRELOAD = /usr/lib/libv4l/v4l1compat.so will not solve this problem in Hello because it is a 64-bit library.

  Using /v4l1compat.so is the right idea, but that error "cannot open shared object file" comes from the kernel and not from Firefox. "Cannot open shared object file" means that the file is not there or that your user name is not allowed to read. Verify the path and permissionsv4l1compat.so (after checking that the library is there and that it has the appropriate permissions) and then try to run: LD_PRELOAD = / usr/lib32/libv4l/v4l1compat.so/usr/bin/firefox

• How can I transfer Favorites from my XP PC to a new laptop with Linux Mint?

  I am currently using a laptop with Windows XP 7 years. I bought a new one and I intend to install Linux Mint. Follow the same instructions for transfer between computers when they have different OS?

  Copy bookmarks

  Press Alt or F10 to bring up the toolbar. Then select
  Bookmarks. Access key is < Control >(Mac: < command >)< shift > B.
  Once the window is open, the top of the page, press the button
  Import and backup. Select export bookmarks to HTML and follow
  prompts and save it in a HTML file. Copy the file to another computer.
  Repeat the above instructions, BUT select Import Bookmarks in HTML,

• Unable to connect to ANY account in Linux Mint 17 64-bit ("Configuration could not be verified - is the name of user or wrong password?")

  So after working all day to get my OS to work together I tried to use Thunderbird on my Linux Mint 17 64-bit. Entering my details, Thunderbird says they're wrong. I checked and checked several times that they are right. I looked around and the farm, I could find what it's useful about my question was a post about something similar on Linux Mint 16 64-bit when all what it says was "reset firewall gateway", which is not exactly the most useful thing. Either by the way, I also reset the router everything and even CHECKED that nothing has been blocked through it and as far as the linux firewall goes, I do not have or have not activated it AFAIK. I'm quite new to Linux in general so I need something that is quite easy to understand in what terms a solution, assuming that everyone knows. I'd like to get this to work because it is pretty well the last obsticle in my own way. If anyone knows anything that might help, please share! Thank you!

  Configuration could not be verified

  This seems to indicate a problem when setting up the account.
  But according to your troubleshooting information an account already exists.
  Please confirm that you do when getting this error.

  I also implemented audit 2-step

  Set up a password for specific application according to the instructions of Google and use it.
  https://support.Google.com/accounts/topic/28786?hl=en & ref_topic = 3382253

• E-mail or email menu link button does not work. Firefox on Linux Mint 13 29,0

  Or the email link menu option under file or the E-mail button installed from Preferences menu option when it is placed on the work of tool bar.

  24.5.0 Thunderbird is the mail client, both installed on Linux Mint 13 last updated.

  Nothing happens when it is on a web page and you click on the e-mail link or clicking on the envelope icon.

  Help appreciated.

  Concerning
  Cavemann

  HI Cavemann,
  I just tested this feature for the first time. It is pretty cool. I just tested this version 30 and it worked well. Are there changes to the Application settings for email links? He remembers the preferences in this menu.