Cards (NICs) Ethernet in the RAC configuration

Similar Questions

• ANALYZE the RAC configuration

  Currently my 2 CARS a SCAN node configured with an IP address and/etc/hosts entry. I got two additional IPs and I want to use the DNS server instead of/etc/hosts /. For this I do following:
  
  
  1 DNS entry rac-scan with 3 fps, two new and an existing one (currently used in entry/etc/hosts)
  1. STOP scan_listener (srvctl stop scan_listener) on a single node i.e node1
  2 STOP the scan (stop scanning srvctl) on a single node that is node2
  3 edit/etc/hosts on both nodes and comment out the line for scan IP
  4. change listening port scan (srvctl change cars - n scan-scan; followed srvctl change u; followed srvctl start scan_listener scan_listener.)
  
  
  Y at - there something I'm missing. Please specify.
  
  Receive your answer.

  Please, use this "HOW TO" for this work:

  * How to change the SCAN or SCAN listening Port setting after Installation [ID 972500.1] *.

• VIP in the RAC configuration

  Hi all

  Please may I know what IP address is assigned to the VIP to the CCR.

  as for the SCAN

  The IP addresses must be on the same subnet as your public network in the cluster by default.

  Thank you

  My apologies... for some reason I read private and not vip.

  The VIP will be logical ip on your public interface.

• Configuration invalid error card NIC ON device "0" when connecting.

  Hello everyone.

  After restarting the host due to hardware problem, we found several VM disconnected from the network, when I tried to connect all them have error "Configuration not valid device error ' 0 '.

  I removed and re - add card NIC that it worked, but it of busy time, is there a convenient way to solve this problem as I have no local password for many of the virtual machine.

  Thanks in advance!

  
  Ajay!

  Please try below step that seems easier for multiple VM when they are already under pressure.

  SSH to the host and determine the VMID for the VM assigned using the command:

  Vim - cmd vmsvc/getallvms | grep-i VMNAME

  	Use the VMID from the command in step 1 to reload the configuration on the host computer by running the command:

  Vim - cmd vmsvc/reload VMID

  	Change the settings of the virtual machine and select 'connect '. Details ref more Vmware KB: 2014469 If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points. Manmohan Boitel VMware SME

• Equium L10: How to configure the wireless card to pick up the router?

  Am wireless news and putting in place Broadband BT BT Voyager2091 router. Laptop wireless button in 'on', but is unable to connect or view available wireless networks. How to set up the portable integrated wireless card to pick up the router?

  Hello

  First of all, I hope that your camera comes with the wireless network card and the wireless network adapter is listed in the device under network adapters Manager.

  The card must be activated first with wireless switch that you can find on the front of your laptop near the lights on the system (right). When the adapter is enabled using FN F8 key combination to activate the card. When you use the FN keys in the middle of the screen, you will see a small window. When the FN button pressed constantly, whenever using the F8 key the different symbol will be chosen.

  Go to START > Control Panel > network connections. Click with the right button on wireless network connection and choose Properties. Chose the WIRELESS NETWORKS, tab and activate the option called use Windows to set up?

  At this point the available networks are listed. Select view wireless networks. If your WLAN is listed here you must configure the connection if the password is set.

  Try it!

• Code 28 on the NIC, ethernet controller, Base system device

  Hi This is my first post, I just installed windows 7 on a computer laptop Tosh A11 back and I have code 28 on the NIC, ethernet controller, peripheral system base and therefore cannot connect to the internet to download the updated windows drivers can help you?

  There are many systems of Tecra A11, if your PC came with win7 preinstalled recovery discs would have installed the necessary drivers.

  If it has not been provided with win7, or you only use the recovery discs, visit Tosh support and download the drivers for win7 on another PC, then transfer them to the PC to install, or via a memory stick

  Unless you mean that your Tosh had a problem, that you thought a priest of maight reinstall

• What is the best configuration of network with 4 NICs (2 x 10GB and 2 x 1 GB)

  I have 4 hosts running ESXi 4 Enterprise license with 2 x 10GB and NIC 2 x 1 GB, what is the best configuration of network to be used in this configuration? where FT logging should go? I can't add NICs more because it is on the HP blades.

  It's my current setup:

  

  Thank you

  Dan

  You talk about the c3000 blade enclosure, aren't you?

  For a solution tolerant when disaster strikes, you will go probably with:

  VSwitch0 has.)

  Physical NIC: vmnic0 (1 Gbps) + vmnic2 (10 GB/s)

  (A.1) VMkernel Port Group (network management)

  vmnic0 = standby

  vmnic2 = active

  (A.2) VMkernel Port Group (Vmotion)

  vmnic0 = active

  vmnic2 = standby

  Networks of Virtual Machine A.3)

  vmnic0 = standby

  vmnic2 = active

  VSwitch1 B.)

  Physical NIC: vmnic0 (1 Gbps) + vmnic3 (10 GB/s)

  (B.1) VMkernel Port Group (Fault Tolerance)

  vmnic1 = standby

  vmnic3 = active

  -Default - VMware uses round robin to assign a virtual computer to one vmnic.

  So you don't configure port aggregating on the switches.

  You can, however, traffic using if possible VIRTUAL networks, this is why you must configure the ports as junction ports.

  André

• the RAC - Question on Openfiler configuration test

  Hi all:
  
  Follow this doc to implement two-node rac http://www.oracle.com/technology/pub/articles/hunter_rac10gr2_iscsi.html
  
  I managed to install Linux on two nodes linux1 and linux2 by doc above.
  I managed to install openfiler on the third node, powered by rpath linux by doc above.
  
  According to the document above and the next step, I need to configure iSCSI volumes using openfiler. The document speaks using the browser through which Openfiler administration is performed.
  
  The issue I'm facing is, I can't get the browser installed on openfiler. How can I do this?
  This node is not connected to the internet.
  I downloaded mozilla firefox on a usb key, how can I access the USB on the openfiler and install the browser?
  Is there a GUI for openfiler?
  
  If anyone has experience with this, I appreciate if they can share.
  
  Thanks a ton
  
  San ~

  Openfiler needs to run a web server. Then you should be able to access from a browser on other machines to which it is connected

  Perhaps the best way to go.

  Published by: bigdelboy on April 28, 2009 10:10

  NB: The RAC forum would obtain generally better supported.

• Re: Tecra R840-199 - cannot get its ethernet card to pick up the IP

  Hello
  I have Tecra R840-199, Running Win 7 64 bit.
  I installed intel drivers for the network card. (Intgel 82579LM)
  the card is recognized on the system,

  but it will not pick up an IP address. (the network cable and port are working)
  Any suggestions on how to solve this problem.
  Ive updated the bios, and software service does not pick up all updated

  Hello

  According to the specifications of the laptop this laptop was offered with preinstalled professional Win7 64 bit. Original recovery image contains all the necessary drivers and after first boot all hardware components are installed correctly.

  Usually the LAN connection cable should be enough and your laptop should have full access to the network.

  Until we start the discussion, I have some questions for you:
  You use this original OS version that you got with your laptop?
  You have installed driver from the Toshiba download page?
  You may have problems at home or in your business?

• How to configure we draw like the paths of the race, rather than the default of transparent traces?

  When I move a drawing creation using simple 1 black lines smooth to draw Adobe Illustrator CC, it is expanded or compound paths.  I want to be able to draw the image as a single path only (points in the middle of the race as opposed to control points on both sides of control shape with filling in the middle).  Is this possible?  Or is it possible to convert simple traced complex traces in Illustrator?

  Yes. Sue's right.

  With the help of Illustrator draw give you paths as the form of the task.  If you draw on the same layer, you'll find yourself with forms that are unique, but without the path to the Center.

  It does not appear that Adobe draw currently records the path of the finger/stylus, so any form you create in one movement appears as a single color.  (All by converting some isolated shots that are not recursive might be easy, strokes that create irregular shapes is not)

  OTOH, if you use something like Adobe's sketch, pouvez get you the paths, but in doing so, you can confiscate the brushes that you created in the application.  I have not sat down to figure out how to reproduce these brushes in Illustrator or Photoshop (easier).

  This is an Adobe Sketch illustration, sent to Illustrator and the embarrassing tildes I did to create.

  

  While you can open the path data by converting it, you can keep a double layer of your works of art first.  The conversion process will replace bitmaps by default brush strokes.

  

• The correct configuration on the redundancy help

  Hello

  We have a VMware ESXi 3 hosts 4.1 with two Equallogic ps4000 infrastructuer, an AIRLOCK and one with SATA drives.

  It is connected with 2 switches, where everything is connected, so redundancy "should" work.

  On ESXi server, we have 8 network ports, in vCenter, we used 2 NICs for the management and vmotion, 2 for iScsi traffic and 2 for network access VLAN.

  Some time ago, one of our switches failed, and all the VM rebooted because they lose the connection, 2-3 minutes later they came back on the use of the other switch, but it should not happen. I did a little research and discovered that perhaps consolidation of NETWORK cards has not been configured no doubt.

  On vSwitch 2 where will my Iscsi traffic, I used a VMkernel port on both network adapters, it should work, right? What have I done wrong? Someone has an idea, what configuration should be placed on the consolidation of NETWORK cards to do this work.

  After a bit of trouble, I clicked on change properties on vSwitch 2, clicked VMkernel port ISCSi, hget to exepotions political in nic teaming configuration. Failover detection network: Link status notification only, switches: Yes, the failback: No.

  When I disconnected the cable, vmwares worked, when I unplugged the swich, RM of vm. I heard when using network cards, should I create the vmkernel ports on this vswitch using redundancy, is this true? I also thought that the ISCSI port group traffic would inherit the rights of the nicteaming, but this happens for some reason any. Someone has an idea of this network which is the best practice, when you configure the redundancy with multiple cards in vCenter?

  Thx for all the help.

  Bit of an old thread, but in the possibility it has not been resolved, here's your answer:

  With Equallogic units, you will need to configure a vmkernel by physical uplink port.

  1 vSwitch

  2 unique physical network (vmnic3, for example vmnic4) cards

  2 vmkernel ports

  -vmk1-> override set failover of vmnic3 active and vmnic4 unused

  -vmk2-> override unused vmnic4 set failover active and vmnic3

  Bind the vmkernel ports to the iscsi hba software and configure storage.  To improve the performance set up frames on all vswitches, switches and vmk.

• Every few minutes, the message "the network seems to be down. Is the network configured correctly? »

  When you play Pandora, every few minutes, the message "the network seems to be down. Is the network configured correctly? "is displayed. I click OK and Pandora continues. Network connection diagnostic report no problem. I have the BDP-S390 and a cable network.

  Hello Thomas,.

  Also, try using a different Ethernet cable or try to connect the player to another router's Ethernet port. He may be a problem with the Ethernet cable taking Ethernet to the router/player.

  Make sure that the Internet speed is 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

  If my post answered your question, please mark it as an "accepted Solution".

• Satellite P100-434 - graphics card gone will be the motherboard replaced?

  Hello!

  Last night, on my laptop screen went black on reboot, but the rest of the laptop seems to load very well. First of all, I thought it was the light back who had died, but an external monitor did not work either, so my son thinks that the graphics card is dead.

  The laptop is almost three years, but, fortunately, it is still under an extended warranty. My question is, repair the laptop, no doubt, replace the motherboard or is not cost-effective and that they will give me a new laptop? Also, how time Toshiba take to repair laptops under warranty?

  Thank you for everything hep.

  Emily

  Hello

  Of course, if the graphics card is faulty, you will get a new mainboard, and due to the extended warranty, it will be free for you. You will not get a new laptop, only the motherboard will be exchanged I think because it s cheaper as a new laptop and Satellite P100 is pretty portable. ;)

  I think that no one can say how long the repair takes to your laptop. It's always different and depending on the availability of spare parts. Therefore, you should ask the authorized service provider. They can tell you more.

  But I have to say on my laptop, that the motherboard was also exchanged the ASP. Repair didn t take much time, as far as I know it was only a few days. Nice service and the technician are cool people. :)

• Zbook Studio G3 HP: How to disable the integrated graphics card Intel and use the dedicated Nvidea graphics all the time?

  Dear all,

  I have a HP zbook studio G3 laptop. I want to go to the Nvidia graphics card permanently.  I tried to disable graphics integrated in the Device Manager, uninstall the driver and allowing even the nvidea card chart of all profiles in the parameter 3D tap in the Nvidia configuration software. Non of them seems to work as the integrated graph is always in action and simple games could not be executed. I always keep in the option to high-performance mode, and the laptop is still connected. Should I manipulate the bios setup?

  Thanks in advance,

  Bezzi

  I have the version non-studio of Zbook 15 G3 which has removable video card. I added the video card after purchase and found that it worked just right if I went into the BIOS and set it to use only the nVidia card. However, because yours is graphic switchable I don't know that you have this option. Have you looked at even the BIOS? Press ESC you turn on, then F10

• Whenever I want to connect to a wireless connection, I have to manually start the automatic configuration service every time.

  always when I start windows was not detected my wireless network, I should start the WZC repair whenever detection networks and my connection, I have configured this Service aoutomatic but she never starts aoutomatically and I should start it up manually... can help me to solve my problem with my wireless connection?

  My OS: windows xp sp3 and I use Dell Vostro1520

  original title: wireless connection problem

  I GOT THE SOLUTION OF MY PROBLEM:

  1. right-click on my wireless connection click on -> status
  2. in the window on the general tab, I click on the -> properties button
  3. in the open window in the general tab I click the button -> Configure...
  4. in the open window, I go to the tab Advanced to->
  5. in the ->property: box, I select the element -> WZC managed Ethernet
  6. in the box -> value I selects the item -> Enabled
  7. I click the button OK to-> .

  NOW MY WZC SERVICE IS AOUTOMATICALLY BEGINS AT THE START OF MY WINDOWS.