Carpetas sympathize

Similar Questions

• Just installed Mac OS Sierra on Mac Pro air. What I do need to update to Safari and other applications on the iPhone and I have the carpet?

  Just installed Mac OS Sierra on Mac Pro air.

  What I do need to update to Safari and other applications on the iPhone and I have the carpet?

  Unless otherwise indicated by an application or in the description of an update, no.

  (144880)

• Satellite X 200 - 25 d: looking for carpet * an update of 1.90 firmware uj850s

  Hello! I looking for new firmware in this forum and I did not find anything... I have x 200 model 25 d with this model of burner, but I can´t truncate all dl dvd with imgburn software. the same model in the witn firmware 1.61 acer laptop may truncate the dl dvd.

  Y at - it an update of firmware for my model? Thank you very much!!

  Hello

  Found a few updates firmware for this model laptop on the page of the pilot European Toshiba but the firmware updates are released for TS-L632 or ODD TS-L632P disks.

  Carpet * an update of the firmware uj850s doesn't seem to be available.

• Carpet * a DVD - RAM UJ-811 drive

  Laptop: Satellite A10-S703
  Carpet * a DVD - RAM UJ-811 drive supports 2 x DVD-R burning.

  The minimum speed of blank media DVD-R available on the market is 4 x.

  A warning on the cover of Imation DVD - R 4 x recordable disks says
  "Download the free firmware required to avoid damaging your Player 2 x" the given url is http://www.imation.com/products/dvd_media/dvd_firmware.html

  The links provided under Toshiba / Panasonic are not useful.

  Can someone guide me if I can burn 4 x media on this drive?

  Thanks in advance!

  Hi Ravi,

  If you have the DVD burner that can burn DVD-R with a speed x 2 there is no way to improve the speed of burning at 4 x speed.

  Some firmware updates of aid to enable support for new media and has increased by a few burning questions (results of optimal registration for your reader).

  Good bye

• Carpet * a DVD-RAM UJ-850 s does not read blank media - need new firmware

  Hey I have a laptop Equium only around the age of 4 months.
  Had nothing but problems with the CARPET * A DVD-RAM UJ-850 s ATA Device drive.
  I need to know where I can get the update of the firmware.

  Firmware for it, that she will not read blank media.

  I agree with master... I don't know what kind of problems you have, but if the player doesn't work properly, it must be replaced. The warranty is certainly valid and the nearest authorized can help you with it.

  Maybe you made a mistake. Take your laptop to the nearest service and show them what you mean exactly. Here, we can only speculate what may be your problem.

• Satellite M40X - I need Firmenware to carpet * a UJ - 831S

  With many new 16 x speed DVD-R or DVD + R, I have problem to burn faster then 4 x speed.
  I'm looking for update for the very old Firmenware for this carpet * carpet * burner UJ - 831S.
  I read in many other Forums on the same issues that have users that they are using the same burner.

  Hello

  You should know that no all media are compatible with all readers.
  There are sometimes compatibility problems.
  As far as I know in the user manual which should be pre-installed on you laptop, you will find a list of compatible and tested media.
  All media of this are tested and it works properly.

  However, I found on the page of the driver Toshiba Qosmio F10 section Firmware Update for the drive UJ-831.
  Check this box:
  http://support.toshiba-tro.de/Tools/updates/DVD-r-RW-firmware/Uj-831/frmwre-XP-102.zip

• Carpet * a UJ - 831S engraving options (Satellite M40X-237)

  Hello

  I recently bought a Satellite M40X-237 with this carpet * a DVD - RAM drive.
  For DVD playback in a home theater system, I usually burn DVDs with booktype set to DVD - ROM, so that the reader can read correctly.
  Problem is that the latter does not support this function.
  I was wondering if there is some kind of upgrade (pilot or possibly firmware) to make this option available?

  I couldn't find any relevant files on the support site.

  Hope someone can help me.

  Mark

  Hello Mark

  Which burning software you use for burning DVDs?

  I use Nero burning software and it works perfectly. All DVD movies are engraved on blank DVD-R and Nero application, you need the value of option media DVD and burn DVD movie.

  All DVDs are recognized by the DVD player and I can enjoy home theater.

• My iphone 6 had belkin invisiglass protective screen installed and broken just drop a foot on soft carpet.  Anyone else had problems?

  I got the Belkin invisiglass screen protector installed on my iPhone at an Apple store in early February 6.  I held in my hand a foot on the carpet, he slipped and the screen seems broken.  I hope it's the invisiglass that's broken and not the screen.  Is this possible?

  When you drop your phone, damage is still possible.

• carpet * a dvd - ram uj-820 s

  My satellite a60 don't overlay the carpet * a dvd - ram uj-820 s at all. The system said that it does not, or he says he broke. But I don't know that it is not broken. What should I do?

  Hi Justus,

  Check in the Device Manager to see if your DVD-RAM is displayed. If it is you can try the troubleshooting for her option.

  You can also try to remove the device and then re - start, in this way, the system should see the drive and reinstall.

  HTH

• Carpet * its bootup UJ811T and Satellite A60

  Hello!

  You I ve a problem with my carpet * his t UJ-811

  When I m starting my Satellite A60, trys DVD player to find a CD/DVD even when there is no disc in the drive... After two or three trys, it stops. The screen is bright (until I switched off the laptop).

  Try to clean using didn t of lens. I have luckily able to find an update of the firmware on the internet. BIOS is up to date (1.9 b)

  The problem occurs over a longer period. At the same time the problem of disappeared strangely. But only for a day.

  Someone at - it help? I Don t want to return the computer toshiba laptop again (due to a hardware problem)... Would it be a software problem. Reinstalling windows could be a risk - if the DVD does not work...

  Thanks for your advice!

  Kind regards
  Andreas78

  Hi Andreas

  Your device is able to boot the operating system and one that is installed on your device?

  Please check the BIOS settings and select the HARD drive first in the boot sequence.

• Satellite Pro A100 carpet * dvd uj - 841 s write at very slow speed

  Hello.

  The carpet * a dvd multi drive uj - 841 s that came with my satellite pro a100 written on very slow DVD. Firmware 1.50
  I use good philips and kodak media (both rated 16 X).

  now, I know that the drive is only rated at 8 X max. But I can't even reach 6 X.

  A firmware update would solve this?

  Thank you very much.

  Hello

  To my knowledge, some burning applications control the burning speed to obtain the best possible results from burning
  As you probably n t know the speed of combustion higher risk of burn errors
  I burn my DVD only using a single 1 x speed.

  Then I can be sure that all DVD players would be able to play the burned DVD.

  Greetings

• Carpet * a/Panasonic UJ-830 s satellite L10

  Hello

  I was put in with the carpet * a reader of DVD-RAM UJ-830 s mounted on my Satellite L10 for a few years, because I have used in a extent the laptop somewhere and have had my external USB DVD - RAM drive still available. However; now I am in the situation where I'm moving around more and am not always able to have my external hard drive with me and make me more frustrated by the performance of the carpet * player.

  I use what is widely regarded as the best available DVD + R media, namely Verbatim 16 x Taiyo Yuden dye, and the UJ-830 s offers only write a 2.4 x. application of Toshiba technical support asking, nea pleading for an update of firmware are met with the response "will be there, but we cannot say when.

  When asked if there was an upgrade of the hardware available, told me that "this is not recommended because of possible compatibility issues".

  Surely Toshiba must have the necessary information, either:
  (a) output a status update for the UJ-830 s firmware so that it recognizes new media correctly
  (b) provide a compatible hardware upgrade

  Anyone with ideas on how to sort this point, or which may suggest some media 8 x good quality that works well with this player, please post. I would also like to hear from someone who has put a new DVD writer (i.e. not original) in a laptop and has successfully obtained work as I am tempted just to try and see.

  Thank you

  Midders

  P.S. I found a list here http://atg.wfu.edu/technotes/dvdmedia/ but can't find compatible 8 x media to buy it!

  Post edited by: ADMIN

  What to say all 100% compatible CD and DVD media are mentioned in the user manual.
  To my knowledge these media work and are 100% compatible with the laptops drive

  But note; the operating manual only provides a list of manufacturers of CD/DVD and NOT CD DVD sellers.

  Please check this thread and posting created by Jeffrey:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=99980&

  However, the manual provides a list of the CD/DVD compatible readers that can be used with the Satellite L10 laptop.
  Should check the page 5 of the operating manual!

  Best regards

• DVD-RAM problems carpet * a UJ810 in Satellite T5200-802 (German model)

  Discovered that i.e. NERO Burning ROM gives a 'calibration error' error code when using certain DVD - R.
  Were to find updated firmware for the carpet * has UJ810, so that I can write on any DVD-R.
  (That way I try different DVD - R, which means that I do not spend a lot of money to try Different DVD - R, especially NONAME DVD - R)
  Thanks for help

  Hi Raoul,.

  I also use a rug * an opricaal reader (UJ825) and I find that the DVD-R DATAWRITE as well as of the MIRROR disks work OK for me. I use Nero and Ulead for burning.

  HTH

• Carpet * a DVD-RAM UJ-811 can't be used with some DVD-R

  I have a laptop Toshiba Satellite P10 554 with XP SP2 and a carpet * a DVD-RAM UJ-811. The problem is that a lot of DVD - R (or DVD - RW) discs cannot be used for burning. If I try such a DVD with Nero a get the error message "disc not initialize - disc may default. Other DVD - r work on my computer.

  It's an update of the firmware of my DVD player. I currently use the H100 firmware version. Unfortionately I do not found any update of Web site (tried toshiba, mast * a, panasonic,...)

  Anyone have an idea how to solve the problem? Is perhaps firmware version top data? How do a get a new firmware?

  Hi haerti,

  I can't find a more recent firmware, too! In my opinion, you should try some different DVD - R from other providers! If this does not resolve the problem then I think you should contact Toshiba Service partner for the NB of a short health check!

  Https://eu.computers.toshiba-europe.com then support & downloads and find an authorized service partner you fid the closest!

  Bye and happy new year!

  Sam

• Carpet * does not play a UJ - 846 s CDR and DVDR player

  I think that the drive is a carpet * a s drive, uj - 846.
  It used to play and read the CDR and DVDR, but now it doesn't.
  How can I fix?

  The computer recognize even there is a disc in the drive now when I put one less than his Blanck.

  It looks a bit like a hardware problem. What do you think?

  Before I will propose the replacement of CD/DVD drive you must remove the drive from Device Manager and reboot the laptop.
  After the restart new BONE will again install the CD/DVD drive

  In addition, you should access the registry and should remove the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Last bbut not least, you should try different CD and DVD media.
  If this wil help nto the chances are that the player works bad and must be replaced.