Catalogue "lost" after repair & optimize

Similar Questions

• Applications on SDCard lost after repair of software

  I moved my a few apps on the sd card. When I charge my phone I may be able to carry up to my phone or its only path. Thank you

  Issue edited by Rickard

  If you perform a master reset or repair of software you will also lose some applications that have been moved to the external SD card. When you move an app to the SD card, Android moves the APK file. Some parts of the application is always stored on the internal memory and is lost when you reset your phone. I also believe, Android generates a device-specific key and encrypts the files when you move an app to the SD card so the old files can no longer be read even if they are still there.

• HP Pavilion Notebook - 15-p206: WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10

  Hello
  
  WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10.

  Update driver BIOS update effective system is rebooted and the wifi does not.
  
  Please help me.

  In the box to Ask Me whatever it is next to the Windows icon, type in "Installed updates", and then click view installed updates.

  Select the update that is dated from when you had the question.

  Click it to uninstall.

  You have to restart the laptop afterwards.

• Firefox crashes 2 seconds after the start. This happened after repair upgrade to Windows 7

  After repair, update Firefox (9.0) will not work. I finally uninstalled and reinstalled without success. Following your directions of support I tried to delete my profile with partial success with a new Firefox profile would be run once and then back to an apparent after 2 seconds accident (as seen in Task Manager). After each new profile he followed the same routine of work once. Any help would be appreciated.

  Try a "clean reinstall" Firefox by removing the Mozilla Firefox installation directory before you reinstall, as explained in these articles:

  • Troubleshoot and diagnose problems of Firefox - see "Reinstall Firefox" here.
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall (De MozillaZine KB article is currently unavailable)

  If Firefox still crashes after a clean reinstall, try the suggestions in the article Firefox crashes - help out, prevent and get help fixing accidents here and, if possible, after a crash report ID, as explained later in this article.

• WiFi lost after winning 10 improvement on Satellite P745-S4217

  Help! WiFi lost after upgrading to windows on my SATELLITE of P745-S4217 10

  Drivers have installed successfully but when I troubleshoot, windows tells me wireless capability is turned off

  I search on the net, but still no solution to my wireless connection interruption

  Any help will be appreciated thanks

  Hello

  In the past, you need to turn on the WiFi using the FN keys, but I think that this should not be necessary to help to win 10.

  In any case, I think that you must connect to the laptop to the internet using LAN cable.
  Then, you must uninstall the WLan Device Manager driver.
  After that, restart the laptop in order to win 10 to select the Wlan driver automatically.

  As far as I know that Win 10 must check for new drivers available WLan and in the best of cases after the update, the WiFi connection should work again.

• All my tabs are lost after downloading an add on. The tabs start showing my default homepage.

  All my tabs are lost after you download an add-on. The tabs start showing my default homepage. Do I have to have all closed tabs before you download an add-on Firefox? Even the site of add-on Firefox restarts as my default homepage. Is there an add-on to prevent that from happening?

  This has happened

  Each time Firefox opened

  Is always

  Diito. Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6. en-US; RV:1.9.2.6) Gecko/20100625 Firefox/3.6.6

• Network is lost after stanby mode - Satellite M40

  I'm from Holland
  I have a Dug Satalite M40 - 170 for several times that the network connection is lost after sleep.
  What is the sollusion. OS = Windows XP prof.

  [Edited by: admin November 23 05 07:07]

  Hello

  My unit is also connected to the company LAN. You use very often stand-by and hibernation mode, but after the awakening of procedure the connection is establish again shortly after.

  Try disabling the network card for a just a few seconds and turn it back on. This option that you can find in tool ConfigFree.

  Good bye

• lost after upgrade to El capitan photos

  Help

  I lost priceless pictures of a loved one lost after updating my old OS to El Capitan.

  I now try to revive photos, hold the option key and select another photo library to see if this will bring my photos.

  I was using an old OS and when my iphone 5s was stollen over the weekend, I bought an iphone 6 when I plugged the new phone to put all of my previous settings and data on it said I have to upgrade my operating system to synchronize this phone.

  I hesitate to update the system, but did it anyway.

  then, when she opened the only pictures that remained on the computer are those that have been taken with my iphone or photos that come from the internet or social networks.

  I lost all my albums of photos taken with a canon ios device.

  These photos are not in time machine.

  How can the computer just delete the photos on its own... How does he choose what to keep and what to delete.

  Please help... I refuse to give up and accept that the computer can simply delete photos and videos.

  Take a look in your images folder and see if there is an iPhoto library.

  What OS did you spend.

• the goal even after repair

  I recently bought a refurbished rebel t5 with the kit lens 18-55mm, as well as the 10-18 mm IS and 55-250 IS lens. Everything has been fine with all my equipment except for the 18-55 mm lens. When the rotation of the lens to zoom in or out, there was a notieable rubbing or grinding noise and there were a few sticking points where the goal was not spin smoothly. I took in a Canon customer service center and they we sent for repair. I am the home goal today and everything is exactly the same thing when I sent it. Same grinding noise, even the sticking points. The service details, bak I say "your product has been examinded and it was found that the party was out of position, causing noises occur. The part of the description says "Focusing ASSY YG2-2353-000 part number".

  I have also two older lenses that I had with the original Canon EOS rebel, I have a 18-55 and 75-300. So none of my other 4 lenses have this problem, but I don't know how many questions it's really. This could potentially damage the lens over time? Or is that what I should really worry? It isn't really the effect on my shot, but I don't want to be slowly causing damage every time that I have to zoom in or out. Since he was sent back to me like that after repair, should I just assume that it is not a big deal, because the repair obiously Center don't think it was if they sent back like that?

  Thanks for any comments,

  Matt

  Matt,

  I don't have this particular goal, but I've been involved with a lot of people what to do. «It is not really effect my shooting,...» ", seems to be like that.  The lens can jump gear fairly easily. You can reset it by deleting and expanding the focus and zoom all the way, both ways.  You can hear a few clicks.  Be gentle.  It's really not a good candidate for the repair, if it is under warranty.

  Using it, he can't last forever or not. If not, buy the new improved version. The Canon EF - S 18-55mm f/3.5-5.6 IS lens STM or elsewhere, far, the best choice for Canon EF - S 17-55mm f/2.8 IS USM Lens.

• How to recover email files lost after compressing files

  I am using windows XP sp3, two days ago, I performed an outlook express file compression process, after only a quick jump

  and asked me to do. Unfortunately, a part of the e-mail files (year 2011) were found missing in the outmail storage box after file compression.

  I think that they were deleted automatically during file compression. Although I found a backup file in the trash, I can't yet recover

  the e-mails lost after recovery.

  For your information: before compressing files - size storage box outmail - abt, 1.2 GB / after compression 827 MB

  MY mailbox: * address email is removed from the privacy *

  It is a common problem with OE because if we let the dbx files grow beyond a few hundred megabytes, they are subject to corruption.  You should do an immediate backup of your messages in the event of further loss.  So, if you have bak files in the trash or in the message store directory, you can try to recover them.

  For references, see points 2, 3, 4 and 6 here: www.oehelp.com/OETips.aspx#2 and import the bak files see here: www.oehelp.com/backup.aspx#imp1 and if you were unable to recover what was lost, then see here: www.oehelp.com/DBXpress/ the latter is able to scan the entire drive for messages and bypassing the file system and if something can get back them It can.

  Steve

• After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen

  After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen... How do I activate windows or how can I connect windows. Once I login I can activate as I have OEM license... Pls advice

  Activation of Microsoft Hotline - (888) 571-2048 MS - MVP - Elephant Boy computers - don't panic!

• Ray with Go: rooted status will be lost after reboot?

  Hello

  I intend at the root of my Ray (GB, unlocked bootloader) in order to use Link2SD and win more memory.

  Direction: http://talk.sonymobile.com/message/142152#142152

  Since I need to root the phone, this setting will be lost after the subsequent reboot (which means, not rooted)?

  TKS,

  /arturiu

  Bobbles. It will remain the same, so don't worry

• Says Lightroom serial number entered is not valid after repair of the system occurred, require disabling series in order to reactivate the same computer

  Says Lightroom serial number entered is not valid after repair of the system occurred, require disabling series in order to reactivate the same computer

  Can you please send me the serial number, you have a private message ?

• POST show different screens and no customization after repair?

  Hey guys,.

  I have an Alienware Laptop, 17 and it was recently repaired. Before it was repaired the POST was really clean. He showed the alienware without progress bar and then booted Windows logo.

  Now, after repair, it first shows a black screen, then a list of recognized drives and watch then the logo alienware with a red progress bar. Also, the 8 Windows loading screen is resized as if the resolution is lower.

  Computer model	Alienware 17
  BIOS Editor	Alienware
  BIOS version	A14
  Date of the BIOS	24/09/2014
  OS version	Microsoft Windows 8.1 Pro

  This is the current configuration of my computer. I watched several times in "F2" (BIOS) for an option of 'silent start-up' or something else, but can't find it. What has changed?

  In the BIOS, select UEFI and secure boot. Try this. Which removes the progress bar.

• Permissions lost after reboot

  Hello

  I have an installation of ESXi 5 on a DL380G6, server is automatically added to the esx fine, admins Add Group field, works very well.

  If I add another group, it works until the server is restarted, and then the group is removed from the permissions tab. I tried several groups and the same thing happens.

  If I change the setting advanced under Config > host Agent > Plugins > hostsvc > esxadminsgroup to another group, it remains after a reboot, as well as the Group admins to esx, if I may change back the group is lost after a reboot.

  Is there any solution for this?

  Thank you.

  ESXi works in RAM and configuration data are not saved in real time on the edges.

  Wait at least 1 h before the reboot of the host.