catalyst for business will not let me set up mail with extension .media

Similar Questions

• Windows 7 sees my second monitor as "generic non - PnP" and will not let me set the correct resolution

  Hello

  I just installed Windows 7 Professional 64 bit on a new hard drive on my Dell Studio 540. The PC has a graphics card ATI Radeon HD 3450 and has a Samsung 226bw 22 "monitor on the digital output. This works very well, and has the resolution of 1650 x 4050. When I am running Vista (on the previous hard drive), I got a monitor flat 14 "old on the other out, and it worked fine (although at a lower resolution).

  I added a monitor AOC F22s + on the other output, expecting to be able to put this to the recommended 1920 x 1080 resolution. Unfortunately, Windows has developed the driver for this monitor "Generic non - PnP" and will not let me set the correct resolution. To the maximum it will allow is 1600 x 1200, (as well as all other resolutions it allows) do not use the monitor at maximum capacity, which is the ratio of evil anyway, so the display seems tense.

  I run Windows Update, so have the latest drivers. I tried to install the other drivers, but nothing helped.

  I tried to unplug the Samsung monitor and restart the PC, so that the AOC, one was the only monitor it and he always had as 'Generic non - PnP' with the wrong resolution.

  Someone at - it ideas? I'm at my wits end. AOC support did not understand and could only suggest that the monitor was faulty, but the place where I bought it insist that it works very well and so no Exchange or get a refund (no restocking fee, which is a RIP-OFF).

  I really want to use both screens and would appreciate greatly any help that anyone can give. I hope I gave enough information. If I didn't, please let me know.

  Thanks in advance,

  Alan

  PROBLEM SOLVED!

  It turned out that my VGA cable was wrong and that it was not send the right signal to the computer. The screen worked fine with a VGA monitor, but the PC has not said that the new monitor is a PnP I tried a different cable and it worked fine.

  Thanks again to all who have suggested things.

• Smartphones blackBerry Desktop Manager synchronization error - will not let me set the synchronization parameters

  I have a new laptop and want to set up to synchronize it with my old Blackberry 8310 Curve just like he used to do with the old laptop.

  I downloaded the latest version of the Desktop Manager (version 6.0.0.40) and I'm trying to configure synchronization settings, but am not able to.  I called Microsoft to see if there was no problem (I use Office 2010), and they said that I needed to talk to Blackberry.

  Here's what happens:

  I connect my Blackberry to my laptop.

  I opened Desktop Manager 6.0.0.40.

  I choose "Organizer" in the left menu, then "settings".

  I get a pop-up window asking me to set up the calendar, tasks, etc. in turn by checking the box.

  I have a box, for example "Calendar Setup" and select Outlook from the list of programs.

  I click 'next' and then choose "two-way synchronization."

  I click on 'next' and get an error message pop up with the title "Intellisync" which reads: "the operation completed unexpectedly."

  This occurs for each content type, I check (calendar, tasks, address book...).

  Anyone can shed some light on this?  I can't wait to get my useful Outlook once again and to have my data sync back!

  Thank you in advance!

  Hey elizabethdw,

  Thanks for the reply.

  To resolve this problem, try to do a detect and repair in Microsoft Outlook.  That are done under help > Office Diagnostics.

  Save the PST information just for pious!  To do this: file > import and export > export to a file > personal folder file, and then save this file on somewheres where you can find it.

  If that does not resolve the issue, perform a clean uninstall of Microsoft Office and re - install only the full version, restart the computer after and then try to configure the synchronization.

  I look forward to your reply.

• First 2014 will not let me choose Mercury Playback with my NVIDIA GPU, but a previous version of CC No.

  My GPU is not on the supported list, but it has more than 1 GB of ram required.  I was able to activate the reading in the old version of the CC Pr after recognizing a pop-up window that the card is not directly supported, and has been able to change without problem.  A blog about Pr 2014 made it seem like this feature should also be available in the new version.  Am I missing just the place to choose the setting, or is this a bug in 2014?

  This post on grateful a CUDA card https://forums.adobe.com/thread/1510099 speaks of a file "corrupted", causing problems

• My windows mail is an e-mail 'stuck' in the Outbox. I can't send it and it doesn't let me remove it and it will not send any what other mail with it here?

  This has happened after that I tried to stop a send e-mail after I realized that I had added the bad attachemnts to e-mail address.  When I try to delete the email "blocked" it says that "an unknown error has occurred" and it won't delete.

  Check to work offline and see if it will remove. If it isn't...
   
  How to remove an Undeletable Message stuck in Windows Mail
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html
   
  If still no joy, try to compact and repair the database.
   
  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

• catalyst for business as a fluid grid?

  Hey just started playing with dreamweaver cs6 and 2 sector reasons were this fluid grid is included and 2nd BusinessCatalyst.

  But the models for catalyst for business are not sensitive pages.

  Is there a model already developed in place as fluid or

  Is it posible to add modules in the network put fluid in place without harm to the heart

  Thank you

  Dave

  Hi Dave, don't know if someone made models that are what I think you are looking for is "sensitive."

  A number went wrong uses terms which circulate little Adobe to blame, but they get it right in a lot of places too.

  -Fluid design is basically using floats, been around for centuries.

  -Speculative design - you use css, sometimes you do things that adapt depending on certain situations, even IE conditional stylesheets are the responsibility of this.

  -Responsive design - fluid design that is not smooth but things to adapt and change not only the width of the window, but the device it is well oriented.

  All are essentially the developments off the coast of the same thing.

  In any case, I think that there are people like Simpleflame on their website TribeVita do them? But Adobe BC is a tool, its more then a CMS, but it is a tool for you to do what you like. I built my own framework to use and can be sensitive and fluid layouts.

  If you want, you can find reagent pure html HTML5 templates and those use to insert modules BC, layouts and modify to put in British Colombia.

• When I want to send email from the Explorer, it goes to outlook express and will not let me send email. How can I fix it?

  Why can't I send an email from the Explorer, it goes to outlook express and will not let me send e-mail

  Hotmail questions need to be asked here: www.windowslivehelp.com

  This forum deals only with Windows.

  Steve

• All of a sudden, after some editing, my published on catalyst for business slide shows thumbnail will not play.  Which should solve?

  This who should I troubleshoot when all of a sudden after a few changes, my published at the business catalyst miniature slideshows will not play?  They appear on the page, but the characteristics of the States do not work.

  Hello

  Please make sure that "Auto run" is enabled in the slide show options and republish the site.

  In the case it don't fix the part of problem please the site url so that we can take a look.

  

  Concerning

  Vivek

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• I use iMessage to the text of my Macbook. For some reason, it will not let me send a text message to a particular group (everyone has iMessage/iPhones) to my computer, but works well on my iPhone. All messages always appear on my Macbook iMessa

  I use iMessage to the text of my Macbook. For some reason, it will not let me send a text message to a particular group (everyone has iMessage/iPhones) to my computer, but works well on my iPhone. All messages always appear on my Macbook iMessage, but when I click in the conversation, no text box for me to write as he does with everyone. It's driving me crazy. How should I do? The two contacts are in my address book and identified on my computer but I can't their message from my computer and have to keep spending on my phone to text their return. Their new messages are always also highlighted on my computer. In the photo I've included, you can see there is no text box for the text of the group with "Franny, dad."

  

  Thanks for any help!

  What happens if you start a new conversation with Franny & Dad from the IOW computer do not try to "catch" the conversation

  Click on new message and put their names in there

  If this does not work - remove the wire from the Mac and try again

• I have a subscription to creative cloud but I want only muse and catalyst for business as a minimal or muse, catalyst, indesign and photoshop. Is there a plan, can I change which will integrate any one of these two options and if so how much it cost? and

  I have a subscription to creative cloud but I want only muse and catalyst for business as a minimal or muse, catalyst, indesign and photoshop. Is there a plan, can I change which will integrate any one of these two options and if so how much it cost? and how to convert my membership to which? Thank you, Linda

  You can opt for the one application CC if the product is available. The CC app cannot be designed according to the choice.

  We bundle for Photo Shop bathroom & light only.

  Concerning

  Stéphane

• Starter edition Influence to results of catalyst for business in ﷯Error: could not generate code to activate one or several web fonts on the page "INFLUENCE." [Error 500]

  New user.  As a series of tests, I opened the influence of the starter project and without making any changes, I tried to publish to the catalyst for business with the error of the object.  Complaint of Web fonts also happens when moving to the preview of the design mode, but after Muse complained played excerpts.  Publish in contrast does not work.

  When I do a simple site of my own making to publish works.

  Each time stranglely my creative cloud application loses also, login credentials.

  How do you get this influence to publish on BusinessCatalyst and how to stop enforcement creative cloud to forget the login?

  Sincere thanks...

  -Chris

  It's really two different questions for two different products. I'll pass this on the forum of Business Catalyst so that they can get your problem immediately solved first.

  Regarding connection problems, I always find that if you use twitter to message @AdobeCare on behalf of the problems. Usually the fastest response.

• Does anyone know the phone for Customer Service? Im trying to install an app and will not let me

  Does anyone know the phone for Customer Service? Im trying to install an app and will not let me

  There is no support for this phone.

  you could get help if you could explain or you can try to contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• Hello, I have a new Mac, I need help to install adobe photoshop c6 I need to install and pay fees I want. but I've been trying and get no days... I had the version of 30 days and will not let me buy him. I NEED FOR MY WORK PLEASE

  Hello, I have a new mac, I need help in installing adobe photoshop cs6, I need to install and to pay the tax. But I've been trying and don't get days, I got 30 days version and will not let me buy it. I need it to work. Please

  Hi the isac,

  You can download Photoshop CS6 from this link: download Creative Suite 6 applications

  You can buy the product from this link: Creative Suite 6

  Kind regards

  Claes

• Outlook Express - will not let me delete any message

  Outlook Express will not let me delete all messages?  How can I fix?  Thank you!

  You have corruption of dbx files.

  Spend most of your messages out of the Inbox and move the messages you want to record off deleted items, and sent items. Locate the OE message store and then close OE.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the Deleted Items.dbx and Sent Items.dbx files and delete them. New files will be created automatically when you open OE.

  Compact all folders as described below.

  To avoid this in the future:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3