Causes of sleep Windows 10 PC Mode to become unresponsive

Similar Questions

• Windows 7 keeps freezing and becoming unresponsive

  My windows was recently becomes insensitive to the point where I have to manually shut down the computer. The other day when this started, I was getting a bsod with the 000000007 code has. I ran everything I could find on the internet such as check disk files of controls systems, but still the system stops responding. I have no restore point on my laptop and am very bored. Windows explore even came as insensitive and closed. Help, please

  Is not that you need to restore points (but why is there no restore point, have you erased them?), but your set of recovery discs, you made these?

  The stop error message indicates driver / disk / memory or the combination problems

  You don't mention brand/model of laptop, but were all utility included pre-installed test? -the time to read the documentation for the laptop or Laptop responsible of the help pages-

• X 51 R2 is very slow recovery mode sleep (windows 8.1, 100% of disk in the Task Manager)

  My X 51 that R2 is very slow recovery mode sleep (windows 8.1, 100% of disk in the Task Manager).  I ran the online support tool and Support tool help.  It takes 3-5 minutes before using the drive falls down to a normal level and the PC can be used.

  Please help.  Thank you.

  Hello

  This may have something to do with the settings in Windows 8.1. Take a look at this Microsoft Community forum thread, it may be useful.

• How to reboot Windows 8 Pro mode safe?

  I have a set of Steelseries MERC keyboard, an Asus Crosshair IV Formula motherboard, and I've been advised to perform a full scan with my Kaspersky PURE, Malwarebytes and Superantispyware in Mode without failure.  I don't know how to restart Windows 8 Pro mode without failure.  I tried pressing the F4, F6 and F8 keys.  I guess I can do a cold reboot, but I prefer to do this properly.  Thank you.

  On your login screen, click on the power icon that gives you three options: sleep, stop and restart.
  Hold down the SHIFT key and click on restart.

  When the computer reboots, you get a blue screen with options.

  Click on troubleshooting-> Advanced Options-> settings-> Enable safemode startup

  http://www.opentechguides.com/how-to/article/Windows-8/7/Windows-8-safe-mode-F8.html

  If you want to enable F8 as previous versions, run the following command as an administrator:

  bcdedit/set {bootmgr} displaybootmenu Yes

  http://www.opentechguides.com/how-to/article/Windows-8/7/Windows-8-safe-mode-F8.html

• windows 8 order dialog box appears randomly, causing all open windows close

  We went from XP forum>

  When I start my computer will be identified, windows 8 close the dialog at random, causing all open windows close. It works also in windows safe mode. This virus has taken over my OS. The program seem to learn all the windows open and close or he could take control of windows Explorer

  In the case, have you thought about backup files you want to keep and then do a factory reset on your computer, so it is good as new?

• need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Website of punch comes in properly next tab sites just wai

  need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Web site fisting comes in following correctly sites just waiting for the website tab help

  If it works in Windows safe mode, then you have a problem with other software, maybe a security software or a system driver that runs on your computer.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• The power spectral density function counts inaccurate amplitude caused by the window function?

  I'm new to this forum, so please let me know if this would correspond better to a different discussion forum.

  Here's the question:

  I would like to know if the power spectral density function ("FFT PSD for 1 Channel.vi") automatically compensates for the loss of the amplitude of entry caused by the window function.  In other words, is a specific window correction factor applied within the PSD vi or do I apply manually?

  Details of the background:

  I tried to answer the question myself by generating a sine wave sampling, it as it is periodic in record time (i.e. 0 to each end of recording time).  The frequency of the sine wave was such that the frequency would exactly correspond to a spectral line in the PSD.  Then I generated the PSD of the sine wave twice: once using a Hanning window and once using a rectangular window (not on average in both cases).  The rectangular extent of the PSD with windows to the frequency of the sine wave is 1.5 times the size of the PSD with a Hanning window applied.

  The experience above indicated to me that a manual setting of the PSD output for the function of window was necessary, however, I repeated the above experiment using random vibration data and does not clear 1.5 x factor.  I have also been informed by his colleagues that the PSD should set for the window function.

  Thank you for your comments.

  Spectral leakage.  When you use a finished sample data from the spectrum resulting is the convolution of the spectrum of the signal as if it extended indefinitely in time with the spectrum of the window.  Even if you do not use a window function, you actually have a rectangular window the same width as the sample size.

  Draw out of the VI PSD with all style of trace to show points to the data points. Turn off Auto scale on the X axis, and expand the graph around your pic. Look at the results of different windows.  In any case, there are several values non-null.  With actual sampled data of limited duration, you will never get the idealized line spectrum.

  If summarize you the output spectral value remains close to 3.2 for all windows.

  Lynn

• Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode,

  Please help with the problem of itunes

  Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode or if windows install is not installed correctly "...  I tried everything that the computer does not work please help as soon as possible, thank you

  Hello

  • What version of Windows are you using?
  • This happens with this program only?
  • What were the changes made before the problem occurred?
  You can check this link:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• How to enable Media Player in Windows XP safe mode

  Does anyone know how to enable Windows Media Player in Windows XP safe mode? I sound activated in safe mode but Windows Media Player does not work, it will not only open and there's nothing in Task Manager which shows that it is running in the processes list. It depend on what services? Media Player works fine in normal mode, but only in safe mode.

  Any suggestion would be appreciated

  Hello Victor,.

  I don't think that it is possible to get Windows Media Player to work in Mode safe as it does start normally.
  I suggest that you work on the main problem which is screening at the blue start of your machine. I suggest you post a thread on our repair system and the recovery location here:
  http://answers.Microsoft.com/en-us/Windows/forum/system?page=1&tab=no

• PAGE_FAULT_IN_NONPAGED_AREA error, I can't yet start windows in safe mode, I can't really afford to lose everthing on my laptop

  I get error page_fault_in_nonpaged_area, I can not even to start windows in safe mode, I can't really afford to lose everthing on my laptop, it did not come with any disk, I have not installed new hardware, only the new software is Google Chrome with a few Add-ons for it, laptop Dell with Windows XP Please help

  I don't really know what to do, I can't access the windows at all, please help

  Hello

  To retrieve your documents, you can download a program called knoppix that you can put on a cd. Then boot on this cd. They copy the documents on another device. Here's a link for you help do - option 3

  MyPcHealth - free tools

• I can connect with the Administrators account without starting windows in safe mode in win xp pro sp3

  I can connect with the Administrators account without starting windows in safe mode and if yes, how?

  If I ca not, how can I load the graphics in safe mode drivers as all graphical interfaces are not displayed correctly.

  Thank you, Andre

  If XP Pro using the Welcome screen, press CTRL + ALT + DELETE to bring up the classic login box.  In the connection box, type the administrator user name and password. Boulder computer Maven
  Most Microsoft Valuable Professional

• How can I start windows in safe mode if I have the error status code 2000-142 7?

  I NEED TO KNOW HOW TO START WINDOWS IN SAFE MODE, I CAN GO TO THE INSTALLATION PAGE BUT ONLY THEN, HOW I START ON SAFE MODE?

  Hello

  Looks like your hard drive is defective or has failed.

  Use the following steps to confirm that.

  Hard drive:

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  See you soon.

• Can't install Itunes, get an error that the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode"

  OP: Install problems Windows

  I tried to install iTunes, but he said that "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Call support personnel. "They gave me similar messages by other programs I've tried to install as well.

  Because I was not running Windows in safe mode in time, I assumed that the installer was not installed correctly. So I tried to download from here: http://www.microsoft.com/downloads/en/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  But then I got error messages like "this update does not apply to your system" and "not enough memory is available to process this command." I tried all the links and none of them worked for me. I'm running a Vista Home Premium 64 bit, and I 2.38 GB of available RAM, so I don't think that the lack of memory is the problem here. What should I do?

  1.] I had a previous version of iTunes, but I got rid of it with Revo Uninstaller.

  I was looking around and I found this: http://www.vistax64.com/vista-installation-setup/96680-repair-windows-installer-service-vista-all-versions-2.html

  I followed the direction of the last message (by F'n Vista) and changed the value of WOW64 Registry and now iTunes has installed perfectly and works now. I'll try to install other programs that I got hurt with previously. Thank you very much for your help! :)

• Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.

  Hi Sir,

  Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.

  Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.

  Please give me guide to solve this problem.

  I thank & regards

  Ramanantsoa D

  Thanks for the reply.

  My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.

  Although I have not tried switching/EAP, I will try that and get back to you.

  And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.

  Thank you.

• I can't do an update of windows in safe mode and unable to start my computer in normal mode?

  Home premium Window7 on Asus laptop

  I want to install antivirus McFee, and it's at a standstill with some problems.  He asked me to do a windows update.

  When I start the computer in normal mode it fails and offers you the following message "a problem has been detected and windows has shut down to protect your computer."

  So I can open only in my local library with the safe mode with networking

  Unfortunately, I can't do an update of windows in safe mode?

  I spent hours trying to solve this problem without the chance and the library is due to close so I'll for now I just ask if anyone can help: -.

  So, how can I do because the computer does not allow me to open in normal mode and I need to install windows updates?

  REMOVE McAfee.  Download your computer up to date and works well.

  Do a scan with ADWcleaner http://www.bleepingcomputer.com/download/adwcleaner/

  AFTER that, install McAfee.