CC 2015 sticks, stutters, buzzes and clicks on and don't connect clips
Hi guys
I use Win7 64-bit SP1, with a card Nvidia Quad FX3800.
I finished all my projects for a long time started in CC2014 and did my first full project (a 10 min interview) by using CC2015 earlier this week. It wasn't a bad experience after all that I had read it, so I used it yesterday for my next project (another interview of 10 minutes with a date limit). It was a disaster.
Basic editing went well (using the .mov & mpg2 files with a color correction very badic), but I needed to import some opening credits, lower third and generic end, I created for this customer in CEP. The opening is a bit complex, because I use several clips. However, half of them would not bind after importation, even though I have relinked them through the import process. The link button is gray, so I couldn't try to reissue manually after importing to the new timeline of the project. A few excerpts that link do not show in preview reader, as if they had been hidden. I tried to replace some of these clips with new clips and paste the attributes of effects, but would not paste attributes.
As I played around with all this, whenever I introduced in preview, playback begins to stutter more and my audio began to acquire clicks and buzzes that weren't there.
After losing the goodness of know how long, I had an accident, who banjaxed my strips of rubber audio and moved the points around, so go up and down levels in the wrong places.
After all this, I finally had a project to export for the Web. I exported in average quality with a low flow. However, it took more than an hour to export the project 12 min with 750 MB file size! The only good thing was a lot of clicks and buzzes from the reading of time line were gone.
Then I did the basic changes in an hour or two, but lost 4 or 5 hours just he finish and export (which should have been 30 / 40 minutes!) To make things worse, it is almost identical to the project that I finished earlier this week in the clips, length and effects. Makes me uncomfortable as this suggests I don't know what to expect whenever I start a new project with CC2015.
I know I've covered a lot of ground here (and my chest is down a load), but everyone knows one or more of these problems? Am I the only one having a slow export experience using CC2015? Any advice would be welcome, especially on stuttering and clicks that went up in the reading and importing old clips / binder.
Kind regards
Graham
I would like to convert it into an editable format easy as dnxhd or even Cineform footage.
I find mpeg2 a pain to change.
If some parts of the timeline give wrong during editing I export to a lossless format and replace it with the new file.
Tags: Premiere
Similar Questions
-
All my pictures have disappeared? I work on a lot that I had downloaded, and then I selected, then went to create a new collection and baptized DH slideshow 2015, then press return and now it is gone! Help, please!
You have created a new CATALOG... ! not a collection! (looking at your screen-clip)
Re-open your correct catalogue-'Lightroom Catalog.lrcat 5' in the Menu > file > open recent element.
Select the pictures again, click [+] on the header of the COLLECTIONS Panel.
Before going further, learn from this video tutorial-
-
Yesterday, I visited a site to which I often, pingtest.net. Normally, when I visit this site, a thin horizontal bar appears at the top of the browser look at a framework. I don't remember what he said, but it spans the entire length of the frame, from left to right. On the right edge of the bar is a x, if I want to close. In addition, when this horizontal bar appears, I also have a box that is approximately six to seven times the height of the thin horizontal bar that appears on the left edge of the horizontal bar thin. This area extends across the width of about one-sixth or fifth of the width of the horizontal bar. It contains something like the following: show all, allow, authorize, and don't forget. I normally click on display all option, and I normally select Enable for all options now.
Here's what happened yesterday: I went to pingtest.net, the horizontal bar appeared and everything seemed normal. However, I have not taken any action. Instead, I changed my mind and decided to go to a different URL. My slider was in the middle of the screen. I moved the slider up until I was intending to be the URL field, in order to enter a new URL. Unfortunately, I did not move the slider enough. So, instead of clicking in the URL field, I clicked right in the middle of the horizontal bar. I HAVE NO IDEA OF WHAT I CLICKED, BUT FROM THAT MOMENT TO WHAT THE HORIZONTAL BAR HAS NEVER REAPPEARED. WHAT I CLICKED, IT SEEMS THAT I LOADED FIREFOX TO NEVER PROVIDE ME THIS HORIZONTAL BAR AGAIN!
As a result, I am also is more to get the box gray with the allow all display, allow and don't forget options.
How can I find a normal behavior and get the normal horizontal bar and the normal box with the options to show all, allow, authorize, and don't forget?
I do not know if you clear the "Site preferences" for the last time (s) would have effect if you would not do that immediately.
-
A buzzing and crackling sounds on hp envy 6 1200
Product: hp envy 6 1200-el windows 8
Codec high definition IDT with beats audio
I buy this ultrabook here in Italy about 2 weeks ago, I have problem in this annoying buzzing and crackling sounds every time I play music, movies etc. no matter what suggestions or solutions to solve this kind of problem? I can't solve this problem, because I don't know everything in my computer... Please answer as soon as possible...I want 6-1204eo, I don't know how it is different from yours but I had the same problem! No more
-
Original title: my recent Documents
Had a recent fall and rebuild and don't get 'My recent Documents' show more when 'Start' is clicked.
Floowed instructions in 'HELP' to customize, Advanced and list but do not work.
Help please.
Thank you
Bill
Hi Bill,
· What version of Windows XP you are using?
If you are using XP Professional, follow these steps.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756
Step 1: Follow these steps:
(a) click on Start and then run.
(b) type gpedit.msc in the run box and press on enter.
(c) in the Group Policy Editor, navigate to:
User configuration > administrative templates > Start Menu and taskbar
(d) double click on menu to delete Documents from the Start Menu.
(e) select not configured.
Step 2: Follow these steps:
(a) click on Start then on Run.
(b) type regedit.exe in the Run dialog box, and then press ENTER.
(c) access: HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
(d) right-click NoRecentDocsMenu to select change.
(e) change the value to 0.
(f) access: HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
(g) right click NoRecentDocsMenu to select change.
(h) change the value to 0.
(i) leave the registry (Regedit.exe) editor.
-
My errased sticker product key and I can't read all the text to reactivate my windows visa. What should I do now?
Hello
You mean the sticker on the case of the Vista operating system pre-installed from Dell, HP, Acer, Toshiba, etc.) ?
If you do, you can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.
Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.
If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.
The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.
See you soon.
-
Original title: need help with wordpad problem
When I have something to stick in wordpad and then change the text, I'll then on preview before printing and most of the time the whole document is not there. I double space between lines and all that is more than one page disappears. I tried all the different formats (no envelope, window envelope, etc.). How can I fix?
Hello
· What happens if you use another application to preview before printing?
· You are able to print the document correctly, or you receive no error message when printing?
You try to use Microsoft Word or Notepad to check if you face the same problem.
First of all, I would like to check to see if print preview is working on a new empty document with only a word in it.
If Yes, then the problem is the document.
You may need to clear any formatting, that depends on where you copied from.
Your rule of printer drivers print preview
-
A few weeks, my computer started buzzing and then stop. Later, I started again in safe mode. I started again with safe mode several times. Now I start it in normal mode, but it still turns off after a while, even if it sounds no more. What could be worng? What should I do? I have Norton antivirus and it does not say that he has a virus. Also, I've scanned with Microsoft and they say that it is virus-free. I am at a loss.
He continue to work OK in safe mode, or it shuts down in safe mode as well?
If it continues to operate in safe mode or if she stays working long enough in 'normal' mode, then try a clean boot and see it works OK under that.
Once again, if it is still running in safe mode try things like check disc errorand check SFC/scannow , they can help.
It is possible that the system hardware fails somehow, so it is advisable to back up your data IF you can maintain your PC long enough in Mode safe.
-
PS 2015.5 to uninstall and reinstall the previous version?
I'm PS CC 2015.5 to uninstall and reinstall the old version. I've uninstalled it... but when I go to reinstall the only option in my CC account in the most recent. How can I reinstall the old version?
Thank you!
previous versions https://forums.adobe.com/thread/2170886
-
Hey its jake here
I am trying to download Adobe Premiere Pro cc that I download the free trial version of double click on the installer of creative cloud she gets up and wants that connect you using a user name and password? I don't remember all account, I had to do when I connected to Adobe was the first and last name.
you need an adobe (valid email) ID / pass to download the application of office cc, https://creative.adobe.com/products/creative-cloud
don't forget either.
When installing on a mac, you will be prompted for the password of your mac.
-
I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) but not tif files? Very frustrating. Tried to install the new updates but my creative cloud is just a blank page?
Hello
I think you are referring to the white empty window of CC desktop application.
Please refer to the threads below where this issue has been addressed:
Creative cloud is empty window why?
New application Cloud Creative unusable: it is empty!
Re: Empty opening creative cloud app
Kind regards
Sheena
-
Photoshop CC 2015 will not quit and I can't stop my Mac. I tried to force him to leave and even uninstalled and it still shows up in Force Quit as being open. How he do to force quit completely?
Launch the Terminal and type one of the following commands:
killall [processname]
-
Im running ADOBE CC 2015 on an iMac and Illustrator plant all the time when I try to use the save for web. I need to use this feature, all day and am frustrated of all accidents. Help, please.
Hello
We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately. If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.
Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html
If you continue to see any questions send us an e-mail to [email protected]
Kind regards
Ashutosh
The name of the Illustrator team engineering
-
When I click to choose a square plan boxes just keep spinning and don't be loading can not someone help?, when I click to choose a plan the just square boxes continue and don't load can someone help?
Try a different browser.
-
Lignthroom CC 2015 .dng files, HDR and panoramic do not show thumbnails in the OSX Finder, only a black rectangle or logo DNG, Ditto with extraction to DNG 7.1, but if to extract the format DNG 5.4 vignette is ok. Ditto in On1 browser? Is this a bug?
Thanks for the test on Windows too.
Yves/CH
Apple has not updated their libraries to support raw yet to be able to understand the new 16 - bit floating point dng files created by Lightroom. If the Finder cannot generate a file icon to show you. Usually the DNG support built into OS X only knows how to treat direct dng files conversions of files from cameras raw is already in favor.
Maybe you are looking for
-
IMovie: video inside images
Before in my Ipad, it was possible to put the video inside the images in the movie, but now I don't know how to do Mac. Help. Thank you
-
External hard drive to format HFS + (not OS x) and Time Machine boot
Hello, I have a MBP of 2014 (10.11.2). Have a 2 TB external drive SG was NTFS but reformatted using THE HFS + and created two partitions of 1 TB (Yes, for my intended purpose in hindsight should have apparently formatted to a ready drive "Time Machi
-
My new R7000 shows wrong time and date, and I can't change it. I tried to restore default, it turned off for a while, updated the FW, but nothing helped. It starts off showing the time and date of 2003 1 Jan 00:00:00. Firmware versionV1.0.4.30_1.1.67
-
laptop will not power. No blue light with ad adapter not plugged in.
Lately, I've been jump the battery in and out to get the laptop (dv6) to propel to the top. This afternoon after a morning's work, the blue laptop ac adapter light does not illuminate and the laptop will not power.Naturally, I suspect the battery, bu
-
Scheduling jobs in an application
Hi all I am developing an application that store information about the device that must regularly be updated. Just for example: I want that every week will launch a function in my application, and all the data collected so far will be synchronized/cl