CC of Dreamweaver and Windows 8.1 - could not find a Publisher valid for this file Extension

Similar Questions

• Why this message: 'Could not find a Publisher valid for this file extension' to a mov file?

  Using CS3 with 2002 intel mac book - file mov - good working order - appears blank in the list of files?

  Hi warnerblake,

  Can you try the solutions proposed in this article change, add file extensions recognized | Dreamweaver and let us know if you still need help?

  Thank you

  Preran

• Error in Windows Mail - "error 623 - system could not find the directory entry for this connection".

  Original title: Windows Vista, Windows Mail, error 623, unable to connect to the mail.
  This problem occurred after a storm. Modem was fried.  Replaced the modem with the modem "2wire" ATT.

  Now get "error 623: the system could not find the directory entry for this connection"or the sys works very well. " Att think maybe in Vista?  Help, please. Works of g-mail, but I like Windows mail.

  Hello Bbuddes,

  You can watch the following information/tutorial to help with most of the problems of Windows Mail.
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  There is a section to reset Windows Mail which can help with your problem.

  Sincerely,.

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Deployment of sbRIO 9606 chassis LabVIEW (sbRIO-9606): (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  Hi guys,.

  I have problems getting my sbRIO 9606 to deploy.

  Everything's fine until during the deployment process, I get this:

  Deployment of sbRIO 9606 chassis (sbRIO-9606)
  LabVIEW: (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  I tried to reinstall LV (ensuring that FPGA & RT deployment options are checked) and the 9606 software shipped, but it made no difference. I'm still waiting my next serial key by NOR, I have to wait that I recorded it before I can deploy?

  Please find attached the screenshots of my:

  • License Manager OR
  • Overview of the 9606 MAX
  • My project folder
  • Dialog box deployment where the error is displayed.

  -Adam

  Hi Tim,.

  In time real 11 is installed according to the recommended software battery installation program included on the disc NEITHER RIO provided in the starter pack.

  The problem is that the recommended Software NI Scan Engine 3.0 installation program.

  The sbRIO 9606 does not support scanning engine.

  Once the scanning engine support has been uninstalled, I could deploy on my 9606.

• Error 623 - system could not find the directory entry for this connection

  This error box 623 often appears when I'm online and it's boring, what the hell. It is a "network connection error", and it says "cannot load the dialogue."

  I had tried a "fix" that I found on the microsoft site using microsoft, but it was not useful. He said that my computer tries to dial a number for the VPN connection. But I don't have a VPN connection and none are listed under my network connections.

  Help, please!

  Hi Crudblue.

  There is a KB detailing this problem and the workaround. http://support.Microsoft.com/default.aspx/KB/320693

  To work around this problem:

  1. Click Start, click Control Panel, and then click on network connections and Internet.
  2. Click on network connections.
  3. Right-click the VPN connection, and then click Properties.
  4. Click to select the checkbox Dial another connection first and then click on the appropriate connection. If there is no dial-up connection to select, you will need to create a dial-up connection and repeat these steps.

     If your VPN connection does not require a dial-up connection, click to clear the checkbox Dial another connection first , and then click OK.

  I hope this helps! If you have any questions please come back!

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows service install could not be consulted how to fix this?

  Windows service install could not be consulted how to fix this?

  Hi raptor05

  What exactly happens when you try to install a program that needs this service?

  Try these steps and see if it helps you:

  Unregister and re-register Windows Installer.

  To do this, follow these steps:
  1. click on start and then click Run.
  2. in the Open box, type msiexec /unreg and then press ENTER.
  3. click on start and then click Run.
  4. in the Open box, type msiexec/regserver, and then press ENTER.

  NOTE: you must log in using the administrator account and try to install it like that. Or you can also try running the program by right clicking and select "run as Administrator". It should work.

  We need to install the latest version of Windows Installer that is 4.5, the link to it is:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am trying to download Adobe Acrobat XI.  Could not find a way to do this and enter my existing serial number.  I'm changing computers.

  I am trying to download Adobe Acrobat XI.  Could not find a way to do this and enter my existing serial number.  I bought a new computer and transferred.  I couldn't transfer my licensed adobe acrobat.  Where can I download so I can enter my serial number?

  Of course, I have not yet registered this program.

  Hey jawesq.

  You can simply download acrobat XI using this link download Acrobat products | Standard, Pro | DC, XI, X & then serialize it using the serial key.

  Let me know if you encounter any problem.

  Kind regards

  Nicos

• Satellite A200: could not find a driver XP for GeForce 7300

  Hi all

  I am trying to install an operating system on the Satellite A200 XP, but I could not find a suitable driver for the video.
  I downloaded from the support page by selecting all the drop down menus, and the driver works well with the material.

  Please, you could direct me to a place where I could download the driver.

  I just bought the machine, and I have no patience to wait to see it work.
  Thank you much in advance.

  What you mean exactly with the driver works well with the material?

• Could not find an appropriate interface for the private interconnection range

  I'm going to install RAC 11.2.0.2 on two nodes REDHAT linux.
  
  I ran runcluvfy pre crsinst, he gave me warning as follows:
  Could not find an appropriate interface for the private interconnection range.
  
  I asked her to use a different subnet as public interconnection for interconnecting private as well as the name / etc/hosts also set private ip addresses. Private ip address is not defined in the DNS system.
  
  .runInstaller also not will pop up the Ethernet because private interconnection over choice of network.
  
  What to do to solve this problem?
  
  Thanks in advance.

  You can temporarily change the mask of 255.255.255.0 on eth3 and see if YES recognizes eth3?

• After the upgrade to windows 10, my dreamweaver has stopped working. Could someone give me a solution for this? I really need DW!

  After the upgrade to windows 10, my dreamweaver has stopped working. It starst and lasts 30 seconds and never work again.

  Could someone give me a solution for this? I really need DW!

  Problems during the installation or opening Dreamweaver on Windows 10

• Could not find any information purchase for re - download

  I bought Adobe Lightroom 6 and has been downloaded .dmg to my iMac.

  Download has been interrupted because I Quit Safari, and I tried to re-download .dmg.

  However, I can't find the link to download anywhere.

  

  

  I checked the about $130 a was purchased with my credit card.

  Where can I download Lightroom?

  Do not steal my money!

  Error "serial number is not valid for this product". Creative Suite

  If that does not help, contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• Re: Could not find a mouse driver for my P300-156 running Windows 7 now

  Hello

  I recently upgraded my Satellite P300-156 laptop from Vista to Windows 7 32 bit (I'm not particularly computer literate and had no idea that this wonderful new operating system may not work properly on modern laptops).

  Had a nightmare, as when the computer starts, the screen is oversized and the keyboard and mouse do not work. It is somewhat intermittent - sometimes it doesn't. I had long conversations and many scans made by Microsoft and it seems now that the problem is that the drivers are not properly load. When we looked in the Device Manager you could see little yellow exclamation (knocks as he called them) bext for pilots to display and mouse and other pointing devices drivers.

  My Windows engineer took a look at this Web site and did not find a driver for the mouse and other pointing devices. Does anyone know if there is a there? I can't believe I maybe isn't able to use Windows 7 on this laptop and may need to go back to the agony of using Vista. It seems crazy.

  Hope someone may be able to help.

  Thank you very much.

  Hello

  You should try Vista 32bits touchpad, as I know, most of them is compatible with win 7. If it does not help you, you can try other models of Satellite:
  [Toshiba drivers | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

• Laptop HP 15-af008ax: could not find the drivers appropriate for ACPI\SMB0001\3 & 2411E6FE & 1 and PCI controller of encryption /Decryption

  After installing the drivers from the HP site I can not find drivers for ACPI\SMB0001\3 & 241E6FE & 1. Device Manager displays "UNKNOWN DEVICE" and said that no drivers were found for her. It is with th encryption /Decryption PCI controller.
  Please suggest me what to do. I'm confused ;-(

  Hello:

  You need this driver for the first...

  http://www.Synaptics.com/en/drivers.php

  To the PCI-E/D controller, you must manually install the driver as follows...

  Download and run this file.  Conclusion of any windows error.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_133833_1

  Go to Device Manager and click on the controller E/D PCI needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66974.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart.

• HP DeskJet 722C (720 Series) could not find the new driver for Windows 7

  I upgraded my OS to Windows 7, I had XP.  My HP Deskjet 722C worked fine, now it doesn't.  No driver Windows 7 on HP Web site.  Is there a solution?  Is there a solution?

  If you use a 32-bit version of Windows 7, you can add a driver using the following: go to the folder devices and printers, add printer, the local printer, LPT1: (or the parallel port regardless of the printer is connected to the), select the Deskjet 720C driver.  You may need to click the Windows Update button if the pilot does not initially in the list.

  If you use a 64 bit version of Windows 7 there is not a solution at this stage, the supplied drivers have a problem.

  

• Could not find an installation package for the product TrayApp. Try installation using a valid copy of the installation package for TrayApp.msi.

  Yesterday I uninstall a program, the Zynga toolbar and which has not, I lost a google toolbar. I then tried to perform a restore, and that's when I started getting the TrayApp message. Also, I tried to do a restore on my external hard drive device, and that did not help either. The date on the external hard drive was 18/02/2011.

  The google toolbar is active it is not displayed any longer.

  Hello

  "a valid copy of the installation package for TrayApp.msi.

  This is normally a problem with your HP printing software

  Uninstall and reinstall the printer

  and try this

  http://www.ehow.com/how_5269744_remove-trayappmsi.html

  Contact HP support

  http://welcome.HP.com/country/us/en/contact_us.html

  HP support forums

  http://h30434.www3.HP.com/

  follow these steps

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html